HomeMy WebLinkAbout3400 St Johns Pkwy (2)r, , .
Job Address:
Parcel ID;
Type of Work: New Addition
Description of Work:1= l
CITY OF SANFORD
BUILDING & FIRE PREVENTION
PERMIT APPLICATION
Application No:
r
Pocumented Construction Value: Scj
Historic District: Yes NoI5,,
Residential Commercial
Alteration Repair Demo Change of Use Move
Plan Review Contact Person:` ci-C CtiYl42sl Title:
Phone: M 1 q4,-Loll i Fax: Email. C c r mccA il
Property Owner InformationpY
Name.t. LlPhone:
Street:,Qlc-::,) 0 \ e MZC-T)--y PA Resident of property?
City, State Zip: Lai( o- Wtu`\t<1
Contractor Information
Name C t Phone:
Street: Fax:
City, State Zip: State License No.: --Er—Q- UM j
Name:
Street:
City, St, Zip:
Bonding Company:
Address:
Architect/Engineer Information
Phone:
Fax:
E-
mail -Mortgage Lender:
Address:
acv
WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY RESULT IN YOUR 0
PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. A NOTICE OF COMMENCEMENT MUST BE
RECORDED AND POSTED ON THE JOB SITE BEFORE THE FIRST INSPECTION. IF YOU INTEND TO OBTAIN)' ,
FINANCING, CONSULT WITH YOUR LENDER OR AN ATTORNEY BEFORE RECORDING YOUR NOTICE OF
COMMENCEMENT.
Application is hereby made to obtain a permit to do the work and installations as indicated. 1 certify that no work or installation has
commenced prior to the issuance of a permit and that all work will be performed to meet standards of all laws regulati ng construction
in this jurisdiction. 1 understand that a separate permit must be secured for electrical work, plumbing, signs, wells, pools,
furnaces, boilers, heaters, tanks, and air conditioners, etc. e
FBC 105.3 Shall be inscribed with the date of application and the code in effect as of that date: 5'h Edition (2014) Florida Building Code
Revised: June 30, 2015 Permit Application
f ;
NOTICE: In addition to the requirements of this permit, there may be additional restrictions applicable to this property that may be
found in the public records of this county, and there may be additional permits required from other governmental entities such as water
management districts, state agencies, or federal agencies.
Acceptance of permit is verification that I will notify the owner of the property of the requirements of Florida Lien Law, FS 713.
The City of Sanford requires payment of a plan review fee at the time of permit submittal. A copy of the executed contract is required
in order to calculate a plan review charge and will be considered the estimated construction value of the job at the time of submittal.
The actual construction value will be figured based on the current ICC Valuation Table in effect at the time the permit is issued, in
accordance with local ordinance. Should calculated charges figured off the executed contract exceed the actual construction value,
credit will be applied to your permit fees when the permit is issued.
OWNER'S AFFIDAVIT: I certify that all of the foregoing information is accurate and that all work will
be done in compliance with all applicable laws regulating construction and zoning.
k i4L S -1Y,/7
Signature of Owner/Agent Date ignature of Contract/ gent Date
Print Owner/Agent's Name
Signature of Notary -State of Florida Date
Owner/Agent is Personally Known to Me or
Produced ID Type of ID
1 Yp r\0 So, 1.1
Print Contractor/Agent's Name `
JODI` A HAFiRISON
Notary Public - State of Florida
MyfCdr mI Expires Oct 27, 2018
Commission # FF 171848
Bonded thrm* Nationai Notary Assn.
Contractor/Age fff rsonalTyRnown to Me or
Produced ID Type of ID
BELOW IS FOR OFFICE USE ONLY
Permits Required: Building Electrical Mechanical Plumbing[] Gas E] Roof
Construction Type:
Total Sq Ft of Bldg:
Occupancy Use:,
Min. Occupancy Load:
New Construction: Electric - # of Amps
Fire Sprinkler Permit: Yes No # of Heads
APPROVALS: ZONING: UTILITIES:
ENGINEERING: FIRE:
COMMENTS:
Flood Zone:
of Stories:
Plumbing - # of Fixtures
Fire Alarm Permit: Yes No
WASTE WATER:
BUILDING:
Revised: June 30, 2015 Permit Application
Page 1 of 3
MY*Miii
Providing Safety & Solutions"
State License # 20001201
Proposal Number: 17 — 0087 J & K Building A & B
Proposal Date: May 1, 2017
Customer: David Cox, Cox Construction
Property Location: St. John Parkway, Sanford Fla.
Work Description: Fire Alarm .Installation
SCOPE OF WORK
Florida Safety Systems will provide the required fire alarm systems for the
two (2) new buildings being constructed for Del Air.
1 .0 = BUhLDIN.G A, FSS will provide a full fire alarm system with occupant
notification.
This will include, but not limited to;
O All Equipment, Fire Panel, Annunciator, Pull Stations, Smoke &
Heat detectors, Horn/Strobes, Wire.
o Connection to Duct detectors.
Connection to Fire Sprinkler System.
Required Elevator Equipment.
o All Labor & Programming.
0 Approved Plans, Permits, Inspections and Training.
o FSS will provide one (1) Lock Box.
One (1) Year Warranty.
1.1 NOT INCLUDED
Electricity to fire panel.
Fire Alarm conduit and devices boxes throughout the building
Conduit out to fire sprinkler backflow
1:.2 PROPOSAL PRICE FOR`BUILDING A
j:r
Labor &=1Vlaterial................................... ................. 4 500 OO r
Florida Safety Systems, LLC
522 Hunt Chub Blvd, t#372 Apopka, FL 32703
Phone: (407) 948-0079 Fax: (888) 869-2059
Page 2 of 3
2.0 BUILDING B; FSS will provide a Fire Sprinkler Monitoring system.
This will include, but not limited to;
All Equipment, Fire Panel, Annunciator, Pull Station, Smoke
above the fire panel and Wire.
Connection to Fire Sprinkler System.
All Labor & Programming.
Approved Plans, Permits, Inspections and Training.
FSS will provide one (1) Lock Box.
One (1) Year Warranty.
2.1 NOT INCLUDED
Electricity to fire panel.
Fire Alarm conduit and devices boxes throughout the building
Conduit out to fire sprinkler backflow
2.2 PROPOSAL PRICE FOR BUILDING B
Labor & Material....................................................... 2,300.00
3.0 PAYMENT TERMS FOR ALL WORK
3.1 Customer will be invoiced 50% of each building upon receiving of permit.
3.2 Customer will be invoiced remaining balance for each upon final
inspection.
Florida Safety Systems, LLC
522 Hunt Club Blvd, #372 Apopka, FL 32703
Phone: (407) 948-0079 r Fax: (888) 869-2059
Page 3 of 3
4.0 CUSTOMER'S RESPONSIBILITIES
ITEM NO. YES NO DISCRIPTION
1 _ X
Panel Back Boxes
To provide a conduit Stub ups with pull string at F/A
Locations
2. X
Functional Pre -Test
To provide and install back bcx;,s with stub -ups
3. X
Programming
To provide and install any necessary fire caulking or fire
sldevin .
4. X
Permit
To provide a raceway with pull string for any required
underground raceway.
5. X
Labor for Installation
To provide a common ground for sure protection equipment.
6. X
Florida PE Seal
When applicable to provide any necessary core drilling.
7. X To install fire alarni power supply back boxes.
8. X To provide termination cabinets as required.
9. X To provide electronic CAD file of the base building plan for
the creation of engineered shop drawings.
10. X To provide a copy of the contract drawings with the engineer
of records seal for permitting, unless the seal is provided by
FSS as a separate option.
11. X To provide 120 VAC as required.
12. X If a lift is required, customer to supply or a separate quote will
be provided if desired.
13. X To provide a hard copy of the specifications and contract
drawings used for bidding purpose, if awarded bid.
14. X I Two (2) dedicated phone lines for the fire panel.
5.0 FSS WILL PROVIDE THE FOLLOWING
DISCRIPTION YES/NO DISCRIPTION YES / NO
Equipment Y Panel Back Boxes Y
Engineered Shop Drawings Y Functional Pre -Test Y
Fire Inspector Test Y Programming Y
Data Submittals Y Permit Y
Wire / Materials Y Labor for Installation Y
Taxes Y Florida PE Seal Y
Lock Box Y
6.0
Todd Bengtso
g— //, (7
Date
Date
Florida Safety Systems, LLC
522 Hunt Chib Blvd, #372 Apopka, FL 32703
Phone: (407) 948-0079' Fax: (888) 869-2059
DATE: 108/14/2017
PROJECT NAME: J -&K Building A
PROJECT ADDRESS: 13400 St Johns Parkway, Bld A Sanford, FL 32711
1, Todd A Bengtson, license # EF20001201, Hereinafter referred to as the "License Holder, " the
President of Florida Safety Systems, LLC hereinafter referred to as the "Company", hereby appoint
the following person as Attorney -in -Fact of the License Holder / Company, i order to (a) sign and
submit building applications, (b) obtain building permits, and (c) obtain the certificate of occupancy
from the:
City of Sanford
on behalf of the License Holder / Company:
Appointed Person: jJodi Bengtson
IC SE L,DER
Signature:
Print Name: ITodd Bengtson
Title: President
The foregoing instrument was acknowledged before me on 08/14/2017
by ITodd Bengtson
the President of Florida Safety Systems, LLC, a Florida corporation, on behalf of the corporation.
He/She:
Personally know to me 0 Choice 1
Has Produced Identification O Choice 2
As identified and who did not take oath.
Notary Public:
My Commission Expires: 110/27/2018
Identification
Produced:
Seal:
jObl LEE HARRISON
Notary Public -State of Florida
M'i' o m.'Expires Oct 27, 2018
Commission # FF 171848
Bonded through National Notary assr
CITY OF SANFORD BUILDING AND FIRE PREVENTION DIVISION
FIRE PLAN REVIEW SERVICE FEES
PHONE: 407.688.5052
FAX: 407.688.5051
DATE:
r
PERMIT NUMBER:
r?
A
BUSINESS/PROJECT NAME:
ADDRESS: Ci
CONTACT NAME: )gt1n PHO C
N REVIEW INFORMATION
CONSTRUCTION O FIRE ALARM FIRE SPRINKLER []HOOD [ ]PAINT BOOTH [ ]TANK
DOES 20% REDUCTIO ACT FEES APPLY: YES NO
c>b
TOTAL FEES:
761,
Page 1 of 1
Providing Safety & Solutions"
State License # 20001201
August 14, 2017
City of Sanford
300 N. Park Ave
Sanford, FL 32711
RE: Fire Alarm Permit Submittal
J & K Building A
3400 St Johns Parkway, Bid. A
Sanford, FL 327711
Sanford Plans Examiner;
Florida Safety Systems has been contracted to install a Fire Alarm System to the J & K Building A, 3400
St. Johns Parkway. Sanford, Florida.
This will consist of,
One (1) Fire Lite MS- 5 UD Fire Panel
One (1) Fire Lite Pull Station, located at the front door.
One (1) Annunciator located at the front door.
Two (2) Smoke detectors, one above the FACP and one located in elevator equipment room.
Five (5) Horn Strobes; Front Door, First Floor office area, Second Floor office area, Warehouse
area and Rear Storage room.
Monitoring of the Flow Switch
Monitoring of the Control Valve
Monitoring will be completed by telephone lines to a UL facility.
General Contractor has stated he will be acquiring the City Lock Box.
Note; The backflow preventer will be monitored by the fire panel in Building A. This is a joint backflow
that services the whole complex.
Please feel free to contact me with any questions.
Sincerely,
Todd Bengtson
President
Florid Safety Systems. LLC
Florida Safety Systems, LLC
522 Hunt Club Blvd, #372 Apopka, FL 32703
Phone: (407) 948-0079 * Fax: (888) 869-2059
S.5UD(E)/RAS-9 ®U (E) Series
Five Zone Fire Alarm Control Panel
Ten Zone Fire Alarm Control Parcel
General
The MS-5UD-3(E) is a five -zone FACP (Fire - Alarm Control
Panel) and the MS-10UD-7(E) is a ten -zone FACP. These con-
trol panels provide reliable fire signaling protection for small to
medium-sized commercial, industrial, and institutional build-
ings. Both panels include built-in communicators for Central
Station Service and remote upload/download.
Each of these FACPs is compatible with System Sensor's
microprocessor -based i3 series detectors. These conventional
smoke detectors can transmit a maintenance trouble signal to
the FACP indicating the need for cleaning and a supervisory
freeze" signal when the ambient temperature falls below the
detector rating. Additionally, both the MS-5UD-3 and MS-
10UD-7 are compatible with conventional input devices such
as two- and four -wire smoke detectors, pull stations, waterflow
devices, tamper switches, and other normally -open contact
devices. Refer to the Fire -Lite Device Compatibility Document
for a complete listing of compatible devices.
Outputs include four NACs (Notification Appliance Circuits),
three programmable Form -C relays (factory programmed for
Alarm, Trouble, and Supervisory) and 24 VDC special applica-
tion resettable and nonresettable power outputs. The FACPs
supervise all wiring, AC voltage, battery level and telephone
line integrity.
Activation of a compatible smoke detector or any normally -
open fire alarm initiating device will activate audible and visual
signaling devices, illuminate an indicating LED, sound the
piezo sounder at the FACP, activate the communicator and
FACP alarm relay, and operate an optional module used to
notify a remote station or initiate an auxiliary control function.
New options include a UL listed printer, PRN -6F and FireLite's
IPDACT Internet Monitoring module. The Fire Watch Series
internet monitoring modules IPDACT-2 and IPDACT-2UD per-
mit monitoring of alarm signals over the Internet saving the
monthly cost of two telephone lines. Although not required, the
secondary telephone line may be retained providing backup
communication over the public switched telephone line.
NOTE: The MS-5UD-3E and MS-10UD-7E offers the same fea-
tures as the MS-5UD-3 and MS-l0UD-7 but allow connection to
240 UAC. Unless otherwise specified, the information in this data
sheet applies to both the 120 VAC and the 240 UAC versions of
these panels.
NOTE: For ULC -listed models, see DF -60440.
Features
Listed to UL Standard 864, 9th edition.
Built-in DACT (Digital Alarm Communicator/Transmitter).
Style B (Class B) IDC (Initiating Device Circuit)
MS-5UD-3 - five IDCs.
MS-10UD-7 - ten IDCs.
Style Y (Class B) NAC (Notification Appliance Circuit) - spe-
cial application power
MS-5UD-3 - four NACs.
MS-10UD-7 - four NACs.
Notification Appliances may be programmed as
Silence Inhibit.
Auto -Silence.
DF -52416:D • A3-20
Ob ForelmerALarms
by • '
Strobe Synchronization for System Sensor, Wheelock,.
Gentex, Faraday, or Amseco devices.
Selective Silence (horn -strobe mute).
Temporal or Steady Signal.
Silenceable or Nonsilenceable.
Optional CAC -5X Style Z (Class A) Converter Module for
NACs and IDCs (2 required for MS-10UD-7).
Form -C Relays for Alarm, Trouble and Supervisory - Con-
tact Ratings 2.0 AQ 30 VDC or 0.5 A @ 30 VAC (resistive).
3.0 A total system current for MS-5UD-3.
7.0 A total system current for MS-10UD-7.
Optional Dress Panel DP -51050
Optional Trim Ring TR -CE for semi -flush mounting.
24 volt operation.
Low AC voltage sense.
Alarm Verification.
PAS (Positive Alarm Sequence).
Automatic battery trickle charger.
Up to eight ANN -BUS annunciators:
Optional 8 zone Relay Module ANN-RLY.
Optional LED Annunciator Module ANN -LED,
Optional Remote Annunciator ANN -80.
Optional Remote Printer Gateway ANN-S/PG.
Optional LED Annunciator Driver ANN -1/0.
Optional 4XTMF module (conventional reverse polarity/city-
box transmitter).
PROGRAMMING AND SOFTWARE:
Can be programmed at the panel with no special software
or additional equipment.
Programmable Make/Break Ratio.
Upload/Download (local or remote) of program and data via
integral DACT.
DF -52416:D • 07/26/2010 — Page 1 of 4
USER INTERFACE:
Built-in DACT (Digital Alarm Communicator/Transmitter).
Integral 80 -character LCD display with backlighting and
keypad.
Real-time clock/calendar with automatic daylight savings
adjustments.
ANN -BUS for connection to remote annunciators.
Audible or silent walk test capabilities.
Piezo sounder for alarm, trouble, and supervisory.
Controls and Indicators
LED INDICATORS
FIRE ALARM (red)
SUPERVISORY (yellow)
TROUBLE (yellow)
AC POWER (green)
ALARM SILENCED (yellow)
CONTROL BUTTONS
ACKNOWLEDGE
ALARM SILENCE
Left Side
SYSTEM RESET (lamp test)
DRILL
Terminal Blocks
AC Power — TB1:
MS-5UD-3 (FLPS-3 Power Supply): 120 VAC, 50/60 HZ,
1.00 A.
MS-5UD-3E (FLPS-3 Power Supply): 240 VAC, 50 HZ,
0.54 A.
MS-10UD-7 (FLPS-7 Power Supply): 120 VAC, 50/60 HZ,
3.80 A.
MS-10UD-7E (FLPS-7 Power Supply): 240 VAC, 50/60 HZ,
2.20 A.
Wire size: minimum 14 AWG (2.00 mm2) with 600 V insulation.
Supervised, nonpower -limited.
Battery (sealed lead acid only) — J12:
Maximum Charging Circuit - Normal Flat Charge: 27.6 VDC
@ 1.4 A. Supervised, nonpower -limited.
Maximum Charger Capacity: 18 AH battery for MS-5UD-
3(E), and 26 AH battery for MS-10UD-7(E). [Two 18 Ah bat-
teries can be housed in the FACP cabinet. Larger batteries
require separate battery box such as the BB -26 or BB -55.]
Top Depth = 5.207" (13.23 cm)
Door = 19.26" (48.92 cm)
Backbox = 19.0" (48.26 cm)
Bottom
Door = 16.821" (42.73 cm)i
Backbox = 16.65" (42.29 cm)
Cabinet Measurements
Page 2 of 4 — DF -52416:D • 07/26/2010
Depth =
x.257"_ 0
13.353 cm)
Right Side
Minimum Battery Size: 7 AH.
Initiating Device Circuits — TB4 (and TB 6 on MS-10UD-7
only):
Alarm Zones 1 - 5 on TB 4 (MS-5UD-3 and MS-10UD-7).
Alarm Zones 6- 10 on T66 (MS-10UD-7 only).
Supervised and power -limited circuitry.
Operation: All zones Style B (Class B).
Normal Operating Voltage: Nominal 20 VDC.
Alarm Current: 15 mA minimum.
Short Circuit Current: 40 mA max.
Maximum Loop Resistance: 100 ohms.
End -of -Line Resistor: 4.7K ohm, 1/2 watt (P/N 71252 UL -
listed).
Standby Current: 2 mA.
Refer to the Fire -Lite Device Compatibility Document for listed
compatible devices.
Notification Appliance Circuits — TB5 (and TB 7 on MS-
10UD-7 only):
Four NACs
Operation: Style Y (Class B)
Special Application power
Supervised and power -limited circuitry
Normal Operating Voltage: Nominal 24 VDC
Maximum Signaling Current: 3.0 A for MS-5UD-3, 2.5 A
maximum per NAC; 7.0 A for MS -1 OLID -7(E), 3.0 A maxi-
mum per NAC.
End -of -Line Resistor: 4.7K ohm, 1/2 watt (Part #71252)
Max. Wiring Voltage Drop: 2 VDC
Refer to the Fire -Lite Device Compatibility Document for com-
patible listed devices.
Form C Relays — TB8:
Relay 1 (factory default programmed as Alarm Relay)
Relay 2 (factory default programmed as fail-safe Trouble
Relay)
Relay 3 (factory default programmed as Supervisory Relay)
Special Application Resettable Power — TB9:
Jumper selectable by JP31 for resettable or nonresettable
power.
Operating voltage: 24 VDC nominal.
Maximum available current: 500 mA - appropriate for pow-
ering four -wire smoke detectors.
Power -limited circuit.
Refer to the Fire -Lite Device Compatibility Document for listed
compatible devices.
Remote Sync Output - T82: Remote power supply synchro-
nization output, only required for the MS-5UD-3. 24 VDC nom-
inal special application power. Maximum current is 40 mA.
End -of -Line Resistor: 4.7K ohm. Supervised and power -lim-
ited circuit.
Product Line Information
MS-5UD-3: Five -zone, 24 -volt Fire Alarm Control Panel
includes backbox, FLPS-3 power supply, technical manual,
and a frame & post operating instruction sheet). 120 VAC
operation.
MS-5UD-3E: Same as MS-5UD-3 except for 240 VAC opera-
tion.
MS-10UD-7: Ten -zone, 24 -volt Fire Alarm Control Panel
includes backbox, FLPS-7 power supply, technical manual,
and a frame & post operating instruction sheet).
MS-10UD-7E: Same as above with 240 VAC FLPS-7.
IPDACT, IPDACT 2/2UD Internet Monitoring Module:
Mounts in bottom of enclosure with optional mounting kit (PN
IPBRKT). Connects to primary and secondary DACT tele-
phone output ports for internet communications over customer
provided ethernet internet connection. Requires compatible
Teldat Visoralarm Central Station Receiver. Can use DHCP or
static IP. (See data sheet DF -60407 for more information.)
IPBRKT: Mounting kit for IPDACT in common enclosure.
IPSPLT: Y Adaptor option to allow connection of both panel
dialer outputs to one cable input to IPDACT (sold separately).
OPTIONAL MODULES
CAC -5X: Optional (Class A) Converter Module. Converts Style
B (Class B) Initiating Device Circuits to Style D (Class A); and
Style Y (Class B) Notification Appliance Circuits to Style Z
Class A). Connects to J2 on the MS-5UD-3 and MS-10UD-
7(E) main circuit board and to J7 on the MS-10UD-7(E).
NOTE: Two Class A Converter Modules are required for the ten -
zone panel.
4XTMF: Transmitter module. Provides a supervised output for
local energy municipal box transmitter and alarm and trouble
reverse polarity. Includes a disable switch and disable trouble
LED. A module jumper option allows the reverse polarity circuit
to open with a system trouble condition if no alarm conditions
exists. Mounts to the main circuit board connectors J4 and J5.
COMPATIBLE ANNUNCIATORS
ANN -80: Remote LCD Annunciator. Mimics the information
displayed on the FACP's LCD. Red. (For white, order: ANN -
80 -W.)
ANN -LED: LED Annunciator with three LEDs for each zone:
Alarm, Trouble, and Supervisory. Mounts in the DP -51050(B)
dress panel. Red. (For white, order ANN -LED -W.)
ANN -BLED: LED Annunciator with three alarm (red) indica-
tors for up to 30 input zones or addressable points. (Red. For
white, order ANN -LED -W.) (See DF -60241).
ANN-RLY: Relay module. Mounts inside the cabinet. Provides
ten Form C relays.
ANN-S/PG: Serial/parallel printer gateway. Provides a connec-
tion for a serial or parallel printer.
ANN -1/0: Driver module. Provides connections to a user -sup-
plied graphic annunciator.
ACCESSORIES
DP -51050: Optional dress panel. Restricts access to the sys-
tem wiring while allowing access to the membrane switch
panel.
BB -26: Battery backbox, holds up to two 25 AH batteries and
CHG-75.
BB -55: Battery backbox, holds up to two 25 AH batteries.
TR -CE: Optional trim -ring for semi -flush mounted cabinets.
PRN -6F: UL listed printer.
DF -52416:D • 07/26/2010 — Page 3 of 4
SYSTEM SPECIFICATIONS
Systeme Capacity
Annunciators......................................................................8
Electrical Specifications
MS -51.1131-3 (FLPS-3 Power Supply): 120 VAC, 60 HZ,
1.0 A
MS-110UD-7 (FLPS-7 Power Supply): 120 VAC, 60 HZ,
3.90 A
MS-5UD-3E (FLPS-3 Power Supply): 240 VAC, 50 HZ,
0.54 A.
MS-10UD-7E (FLPS-7 Power Supply): 240 VAC, 50 HZ,
2.20 A.
Wire size: minimum 14 AWG (2.0 mm2) with 600 V insula-
tion, supervised, nonpower -limited
Cabinet Specifications
Door: 19.26" (48.92 cm.) high x 16.82" (42.73 cm.) wide x
0.72" (1.82 cm.) deep. Backbox: 19.00" (48.26 cm.) high x
16.65" (42.29 cm.) wide x 5.25" (13.34 cm.) deep. Trim Ring
TR -CE): 22.00" (55.88 cm.) high x 19.65" (49.91 cm.) wide.
Shipping Specifications
Dimensions:
20.00" (50.80 cm.) high
22.5" (57.15 cm.) wide
8.5" (21.59 cm.) deep.
Weight: 27 Ib (12.20 kg)
Temperature and Humidity Ranges
This system meets NFPA requirements for operation at 0 —
49°C/32 — 120°F and at a relative humidity 93% t 2% RH
noncondensing) at 32°C f 2°C (90°F t 3°F). However, the
useful life of the system's standby batteries and the electronic
components may be adversely affected by extreme tempera-
ture ranges and humidity. Therefore, it is recommended that
this system and its peripherals be installed in an environment
with a normal room temperature of 15 — 27°C/60 — 80°F.
Agency Listings and Approvals
The listings and approvals below apply to the basic MS -51_11D-3
and MS-10UD-7 control panels. In some cases, certain mod-
ules or applications may not be listed by certain approval
agencies, or listing may be in process. Consult factory for lat-
est listing status.
UL Listed: File S624
FM Approved
CSFM: 7165-0075:0214
MEA: MEA: 333-07-E
NOTE: For ULC -listed models, see DF -60440.
NFPA Standards
The MS-5UD-3(E) and MS-10UD-7(E) complies with the fol-
lowing NFPA 72 Fire Alarm Systems requirements:
LOCAL (Automatic, Manual, Waterflow and Sprinkler
Supervisory).
AUXILIARY (Automatic, Manual and Waterflow) (requires
4XTMF).
REMOTE STATION (Automatic, Manual and Waterflow)
Where a DACT is not accepted, the alarm, trouble and
supervisory relays may be connected to UL 864 listed
transmitters. For reverse polarity signaling of alarm and
trouble, 4XTMF is required.)
PROPRIETARY (Automatic, Manual and Waterflow).
CENTRAL STATION (Automatic, Manual and Waterflow,
and Sprinkler Supervised).
OT, PSDN (Other Technologies, Packet -switched Data
Network)
FireLite® Alarms and System Sensor® are registered trademarks of
Honeywell International Inc.
2010 by Honeywell International Inc. All rights reserved. Unauthorized use
of this document is strictly prohibited.
This document is not intended to be used for installation purposes.
ISO9001 We try to keep our product information up-to-date and accurate.
000 We cannot cover all specific applications or anticipate all requirements.
ENRINEERINC 8 MANefACTRRING All specifications are subject to change without notice. IM
QUALITY SYSTEMS Made in the U.S. A.
For more information, contact Fire -Lite Alarms. Phone: (800) 627-3473, FAX: (877) 699-4105.
www.firelite.com
Page 4 of 4 — DF -52416:13.07/26/2010
Output Nornsq
Strobes, _•
Horn Strobes for
Wall Applications
SpectrAlert® Advance audible visible notification products
are rich with features guaranteed to cut installation times
and maximize profits.
Features
Plug-in design with minimal intrusion into the back box
Tamper-resistant construction
Automatic selection of 12- or 24 -volt operation at
15 and 15/75 candela
Field -selectable candela settings on wall units: 15, 15/75,
30, 75, 95, 110, 115, 135, 150, 177, and 185
Horn rated at 88+ dBA at 16 volts
Rotary switch for horn tone and three volume selections
Universal mounting plate for wall units
Mounting plate shorting spring checks wiring continuity before
device installation
Electrically Compatible with legacy SpectrAlert devices
Compatible with MDL3 sync module
Listed for ceiling or wall mounting
Agency Listings
SIGNALING
@F M> MEA
O
LISTED
S4011 (chimes. horn strobes, horns)
APPROVED
3023572
approved
MEA452-05-E
7125-1653:186 (indoor strobes)
7125-1653.188 (hom strobes.
chime strobes)
55512 (strobes) 7135-1653:189 (horns, chimes)
The SpectrAlert Advance series offers the most versatile and
easy-to-use line of horns, strobes, and horn strobes in the industry.
With white and red plastic housings, wall and ceiling mounting
options, and plain and FIRE -printed devices, SpectrAlert Advance
can meet virtually any application requirement.
Like the entire SpectrAlert Advance product line, wall -mount horns,
strobes, and horn strobes include a variety of features that increase -
their application versatility while simplifying installation. All devices
feature plug-in designs with minimal intrusion into the back box,
making installations fast and foolproof while virtually eliminating
costly and time-consuming ground faults.
To further simplify installation and protect devices from construction
damage, SpectrAlert Advance utilizes a universal mounting plate
with an onboard shorting spring, so installers can test wiring
continuity before the device is installed.
Installers can also easily adapt devices to a suit a wide range of
application requirements using field -selectable candela settings,
automatic selection of 12- or 24 -volt operation, and a rotary switch
for horn tones with three volume selections.
SpectrAlert Advance Specifications
General
SpectrAlert Advance horns, strobes, and horn strobes shall mount to a standard 4 x 4 x 1'/z -inch back box, 4 -inch octagon back box, or
double -gang back box. Two -wire products shall also mount to a single -gang 2 x 4 x 17B -inch back box. A universal mounting plate shall
be used for mounting ceiling and wall products. The notification appliance circuit wiring shall terminate at the universal mounting plate.
Also, SpectrAlert Advance products, when used with the Sync Circuit' Module accessory, shall be powered from a non -coded notification
appliance circuit output and shall operate on a nominal 12 or 24 volts. When used with the Sync•Circuit Module, 12 -volt -rated notification
appliance circuit outputs shall operate between 8.5 and 17.5 volts; 24 -volt -rated notification appliance circuit outputs shall operate between
16.5 and 33 volts. Indoor SpectrAlert Advance products shall operate between 32 and 120 degrees Fahrenheit from a regulated DC or full -
wave rectified unfiltered power supply. Strobes and horn strobes shall have field -selectable candela settings including 15, 15/75, 30, 75, 95,
110, 115, 135, 150, 177, and 185.
Strobe
The strobe shall be a System Sensor SpectrAlert Advance Model listed to UL 1971 and shall be approved for fire protective service
The strobe shall be wired as a primary -signaling notification appliance and comply with the Americans with Disabilities Act requirements for
visible signaling appliances, flashing at 1 Hz over the strobe's entire operating voltage range. The strobe light shall consist of a xenon flash
tube and associated lens/reflector system.
Horn Strobe Combination
The horn strobe shall be a System Sensor SpectrAlert Advance Model listed to UL 1971 and UL 464 and shall be approved for
fire protective service. The horn strobe shall be wired as a primary -signaling notification appliance and comply with the Americans with
Disabilities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobe's entire operating voltage range. The strobe light
shall consist of a xenon flash tube and associated lens/reflector system. The horn shall have three audibility options and an option to switch
between a temporal three pattern and a non -temporal (continuous) pattern. These options are set by a multiple position switch. On four -wire
products, the strobe shall be powered independently of the sounder. The horn on horn strobe models shall operate on a coded or non -coded
power supply.
Synchronization Module
The module shall be a System Sensor Sync -Circuit model MDL3 listed to UL 464 and shall be approved for fire protective service. The module
shall synchronize SpectrAlert strobes at 1 Hz and horns at temporal three. Also, while operating the strobes, the module shall silence the horns
on horn strobe models over a single pair of wires. The module shall mount to a 411/16 x 411/16 x 21/8 -inch back box. The module shall also
control two Style Y (class B) circuits or one Style Z (class A) circuit. The module shall synchronize multiple zones. Daisy chaining two or more
synchronization modules together will synchronize all the zones they control. The module shall not operate on a coded power supply.
Standard Operating Temperature 32°F to 120°F (0°C to 49°C)
Humidity Range 10 to 93% non -condensing
Strobe Flash Rate 1 flash per second
Nominal Voltage Regulated 12 DC/FWR or regulated 24 DC/FWR'
Operating Voltage Rangez 8 to 17.5 V (12 V nominal) or 16 to 33 V (24 V nominal)
Operating Voltage Range MDU Sync Module 8.5 to 17.5 V (12 V nominal) or 16.5 to 33 V (24 V nominal)
Input Terminal Wire Gauge 12 to 18 AWG
Wall -Mount Dimensions (including lens) 5.6-L x 4.7-W x 2.5-D (142 mm L x 119 mm W x 64 mm D)
Horn Dimensions 5.6"L x 4.7-W x 1.3"D (142 mm L x 119 mm W x 33 mm D)
Wall -Mount Trim Ring Dimensions (sold as a 5 pack) (TR -HS) 5.7"L x 4.8"W x 0.35-D (145 mm L x 122 mm W x 9 mm D)
Notes;
1. Full Wave Rectified (FWR) voltage is a non-regulated, time -varying power source that is used on some power supply and panel outputs.
2. P, S, PC, and SC products will operate at 12 V nominal only for 15 and 15/75 cd.
UL Current Draw Data
Temporal Medium 235 253 288 297 Temporal Medium 209 224 250 258
Temporal Low 232 251 282 292 Temporal Low 207
8-175 Volts 16-33 Volts
256
Non -Temporal High 255
8-17.5 Volts
303
16-33 Volts
Candela CC FWR DC
Non -Temporal Medium
FWR
259
Sound Pattern dB DC FWR DC FWR
Standard 15 123 128 66
295
71
229
Temporal High 57 55
24 -Volt Nominal
Reverberant Anechoic
69 75
Candela 15/75 142 148 77
100
81
Non -Temporal
Temporal Medium 44 49
85
58 69
Range 30 NA NA 94
Low
96
74
Temporal Low 38 44
96
44 48
75 NA NA 158
88
153
93
Non -temporal High 57 56
Coded
69 75
95 NA NA 181
90
176
98
Non -temporal Medium 42 50
75
60 69
110 NA NA 202 195 Non -temporal Low 41 44 50 50
115 NA NA 210 205 Coded High 57 55 69 75
High 135 NA NA 228 207 Coded Medium 44 51 56 69
Candela 150 NA NA - 246 220 Coded Low 40 46 52 50
Range 177 NA NA 281 251
185 NA NA 286 258
r
8-17.5 Volts 16-33 Volts
DC Input 15 15175 15 15175 30 75 95 110 115
Temporal High 137 147 79 90 107 176 194 212 218
Temporal Medium 132 144 69 80 97 157 182 201 210
Temporal Low 132 143 66 77 93 154 179 198 207
Non -Temporal High 141 152 91 100 116 176 201 221 229
Non -Temporal Medium 133 145 75 85 102 163 187 207 216
Non -Temporal Low 131 144 68 79 96 156 182 201 210
FWR Input
Temporal High 136 155 88 97 112 168 190 210 218
Temporal Medium 129 152 78 88 103 160 184 202 206
Temporal Low 129 151 76 86 101 160 184 194 201
Non -Temporal High 142 161 103 112 126 181 203 221 229
Non -Temporal Medium 134 155 85 95 110 166 189 208 216
Non -Temporal Low 132 154 80 90 105 161 184 202 211
UJ Ue
16-33 Volts 16-33 Volts
DC Input 135 150 177 185 FWR Input 135 150 177 185
Temporal High 245 259 290 297 Temporal High 215 231 258 265
Temporal Medium 235 253 288 297 Temporal Medium 209 224 250 258
Temporal Low 232 251 282 292 Temporal Low 207 221 248 256
Non -Temporal High 255 270 303 309 Non -Temporal High 233 248 275 281
Non -Temporal Medium 242 259 293 299 Non -Temporal Medium 219 232 262 267
Non -Temporal Low 238 254 291 295 Non -Temporal Low 214 229 256 262
Horn Tones and Sound Output Data
8-175
Switch Volts
16-33
Volts
24 -Volt Nominal
Reverberant Anechoic
82 88 88
Position Sound Pattern dB DC FWR DC FWR DC FWR DC FWR
1 Temporal High 78 78 84 84 88 88 99 98
2 Temporal Medium 75 75 80 80 86 86 96 96
3 Temporal Low 71 71 76 76 83 80 94 89
4 Non -Temporal High 82 82 88 88 93 92 100 100
5 Non -Temporal Medium 78 78 85 85 90 90 98 98
6 Non -Temporal Low 73 74 81 81 88 84 96 92
7t Coded High 82 82 88 88 93 92 101 101
Si Coded Medium 78 78 85 85 90 90 97 98
91 Coded Low 74 75 81 81 88 85 96 92
tSettings 7, 8, and 9 are not available on 2 -wire horn strobes
SpectrAlert Advance Dimensions
IN
Lyall -mount horn strobes
SpectrAlert Advance Ordering Information
SYSTEM 3825 Ohio Avenue • St. Charles, IL 60174 @2014 System Sensor.
i Phone: 800-SENSOR2 •Fax: 630-377-6495 Product
urrent roduions summon, charge
dingthwheat
notice. onof this data sarzomheet. SENSOR for current product information, including the latest version of This data sheet.
www.systemsensor.com AVDS10201 •1/14
Lyall Horn Strobes gall Strobes (cont.)
P2R 2 -Wire Horn Strobe, Standard cd, Red SRH Strobe, High cd, Red
P2R-P 2 -Wire Horn Strobe, Standard cd, Red, Plain SRH -P Strobe, High cd, Red, Plain
P2R-SP 2 -Wire Horn Strobe, Standard cd, Red, "FUEGO" SRH -SP Strobe, High cd, Red, "FUEGO"
P21RH 2 -Wire Horn Strobe, High cd, Red SW Strobe, Standard cd, White
P2RH-P 2 -Wire Horn Strobe, High cd, Red, Plain SW -P Strobe, Standard cd, White, Plain
P2W 2 -Wire Horn Strobe, Standard cd, White SWH Strobe, High cd, White
P2W-P 2 -Wire Horn Strobe, Standard cd, White, Plain SWH-P Strobe, High cd, White, Plain
P2WH 2 -Wire Horn Strobe, High cd, White Horns
P2WH-P 2 -Wire Horn Strobe, High cd, White, Plain HR Horn, Red
P4R 4 -Wire Horn Strobe, Standard cd, Red HW Horn, White
P4R-P 4 -Wire Horn Strobe, Standard cd, Red, Plain Accessories
P4RH 4 -Wire Horn Strobe, High cd, Red TR -HS Trim Ring, Wall, Red
P4W 4 -Wire Horn Strobe, Standard cd, White SEER Indoor Surface Mount Back Box, Red
Wall Strobes SBBW Indoor Surface Mount Back Box, White
SR Strobe, Standard cd, Red
SR -P Strobe, Standard cd, Red, Plain
SR -SP Strobe, Standard cd, Red, "FUEGO"
Notes:
All -P models have a plain housing (no "FIRE' marking on cover)
All -SP models have "FUEGO" marking on cover
Standard cd" refers to strobes that include 15, 15/75, 30, 75, 95, 110, and 115 candela settings.
High cd" refers to strobes that include 135, 150, 177, and 185 candela settings.
SYSTEM 3825 Ohio Avenue • St. Charles, IL 60174 @2014 System Sensor.
i Phone: 800-SENSOR2 •Fax: 630-377-6495 Product
urrent roduions summon, charge
dingthwheat
notice. onof this data sarzomheet. SENSOR for current product information, including the latest version of This data sheet.
www.systemsensor.com AVDS10201 •1/14
Models Available
Two -Wire Models
2W-13
2WT-B
2 -wire standard
2 -wire standard with thermal
Four -Wire Models
4W-13 4 -wire standard
4WT-B 4 -wire standard with thermal
Accessories
2W-MOD2 2 -wire loop test/ maintenance module
SENS-RDR Sensitivity reader
RT Removal/ replacement tool
A77-AB2 Retrofit adapter bracket
Product Overview
Plug-in detector line — mounting base System Sensor's 13'" series smoke detectors represent a significant advancement in
included conventional detection. The P family is founded on three principles: Installation ease,
Intelligence, and Instant inspection.
Large wire entry port
Installation ease. The 13 line redefines installation ease with its plug-in design. In-line terminals with SEMS screws
This allows an installer to pre -wire the bases included with the heads. The large
Mounts to octagonal and single -gang wire entry port and in-line terminals provide ample room for neatly routing the
backboxes, 4 -square backboxes, or wiring inside the base. The base accommodates a variety of back box mount -
direct to ceiling ing methods as well as direct mounting with drywall anchors. To complete
the installation, i3 heads plug-in to the base with a simple Stop -Drop 'N Lock
Stop -Drop 'N Lock7` attachment to base action.
Removable detector cover and chamber intelligence. i' detectors offer a num.bcr of intelligent features to simplify
for easy cleaning testing and maintenance. Drift compensation and smoothing algorithms are
standard with the ij line, to minimize nuisance alarms. When connected to the
Built-in remote maintenance signaling 2W-l'v1OD2 loop test/maintenance module, or a panel equipped with the i'
protocol, 2 -wire 1' detectors are capable of generating a remote maintenance
Drift compensation and smoothing signal when they are in need of cleaning. This signal is indicated via an LED
algorithms located at the module and the panel. To read the sensitivity of i3 detectors, the
Simplified sensitivity measurement
SENS-RDR is a wireless device that displays the sensitivity in terms of percent
per foot obscuration.
Wide angle, dual color LED indication Instant inspection. The 1' series provides wide angle red and green LED indica-
Loop testing via EZ Walk feature tors for instant inspection of the detector condition, indicating: normal standby,
out -of -sensitivity, alarm, or freeze trouble conditions. When connected to the
Built-in test switch 2W-MOD2 loop test/maintenance module or a panel with the i; protocol,
the EL Walk loop test feature is available on 2 -wire P detectors. 'iI'his feature
UL ,..
aMo ..
0. MEA INSFiI
verifies the initiating loop wiring by providing LED status indication at each
LISTED approved approved
defector.
S91i 3011446 7272-1209:210 29001-E 2093
Architect/Engineer Specifications
Stroke detector shall he a System Sensor
i' Series model number-, listed to
Underwriters Laboratories UL 268 for Fire
Protection Signaling Systems. The detector
shall be a photoelectric type (model 2W -B,
4W -B) or a combination photoelectric/
rhfftrial (model 2WT-B, 4WT-B) with ther-
mal sensor rated at 7.35°F (57.2'C). The
CICUMOr Shall include a mounting base forZ,
mounting to 31/zinch and 4 -inch octagonal,
singic gang, and 4 -inch square back boxes
Electrical Specifications
perc)i i Voltage
Nominal: 12/24V non -polarized
Min,: 8.5V
Max.: 35V
Ripple Voltage,
30% peak to peak of applied voltage
with a plaster ring, or direct mount to the
ceiling using drywall anchors. Wiring con-
nections shall be made by means of SEMS
sci-c\7,,s. The detector shall allow pre -wiring
of the base and the head shall be a plug
in type. The detector shall have a nomi-
nal sensitivity of 2.5% per foot nominal
as measured in the UL smoke box. The
detector shall be capable of automatically
adjusting its sensitivity by means of drift
compensation and smoothing algorithms.
Standby Cui rent
2 -wire: 50 pA maximum average
4 -wire: 50 1)A maximum average
MFwin,in. Alarm Cwient
2 -wire: 1.30 mA limited by control panel
4 -wire: 20 mA 012V, 23rnA 0 24V
The detector shall provide dual color LED
indication which blinks to indicate power
LIP, normal standby, out of sensitivity,,
alarm, and freeze trouble (model 2W'F-B,,
4WT-B.) conditions. When used in conjunc-
tion with the 2XXLMOD2 module, 2 -wire
models shall include a maintenance signal
to indicate the need for maintenance at the
alarm control panel, and shall provide a
loop testing capability to verify the circuit
without testing each dcrector individually.
Frail Siandlby Current
2 -wire: 100 pA
4 -wire: n/a
2 -wire: n/a
4 -wire: 0.5 A C) 30V AC/DC
LED Mode Green _FD Red LFP Cumin ,r Du'atlun
Power up Blink every 10 seconds Blink every 10 seconds Initial LED status indication 80 seconds
Normal (Standby) Blink every 5 seconds off
Description
Out of sensitivity off Blink every 5 seconds
Sensitivity reader
Freeze trouble off Blink every 10 seconds
Retrofit adapter bracket. 6.6 in. (16.76crri) diameter
Alarm off Solid
Ph: 613.54.281.142
Physical Specifications
2W -B and 4W -B: 32'F -120'F (0'C -49T) 2.5%/ft. nominal 3/,inch octagonal back box
2WT-B and 4WT-6: 32'F-100ol- (0'C -37.8'C) 4 -inch octagonal back box
Ineut Terminals
Single gang back box
Op, atter', HuW.011''; Range 14-22 AWG
4 -inch square back box with a plaster ring
0 to 95% RH non -condensing
Dinrienslens (including ;ase)Direct mount to ceiling
he!mal Sensor 5.3 inches (127 irm) diameter
135°F (57.7C) fixed 2.0 inches (51 mm) height
Freeze Trouble Vveiph!
2WT-B and 4W[ -B only: 41't (5°C) 6.3 oz. (178 grana)
Ordering Information
Motel The.: rnal: 'Wh i i: g Alarr e n
2W -B No 2 -wire 130 mA max. limited by control panel
2WT-B Yes ?-wire .1.30 mA max. limited by control panel
4W -B No 4 -wire 20 mA @ 12V, 23mA @ 24V
4WT-B Yes 4 -wire 20 mA @ 1.2V, 23rriA @ 24V
Mr, Description
2W-MOD2 2 -wire loop test / maintenance module
SENS-RDR Sensitivity reader
RT Removal / replacement tool
A77-AB2 Retrofit adapter bracket. 6.6 in. (16.76crri) diameter
System Sensor Sales and Service
System Sensor Headquarters System Sensor Canada System Sensor in China System Sensor — Far East System Sensor — India
3825 Ohio Avenue Ph: 905.812.0767 Ph: 86.29.8832.0119 Ph: 85.22.191.9003 Ph: 91.124.637.1770 x.2700
St. Charles, IL 60174 Fx: 905.812.0771 Fx: 86.29.8832.5110 Fx: 85.22.736.6580 Fx: 91.124.637.3118
Ph: 800/SFNSOR2
System Sensor Europe System Sensor in Singapore System Sensor — Australia System Sensor — Russia
Fx: 630/377-6495
Ph: 44.1403.891920 Ph: 65.6273.2230 Ph: 613.54.281.142 Ph: 70.95.937.7982
www.sysLernsensor.cDTT1 Fx: 44.1403.891921 Fx: 65.6273.2610 Fx: 613.54.281.1.72 Fx: 70.95.937.7983
9 2004 System Sensor, The company reserves the right to chanLe product specifications without notice. A05-0318-005.6/04-#1,280
G-12 Series
r Alarm Pull Stations
DF -52004:A1 - F-050
anus e
by Honeywell
General
M I F''
The Fire -Lite BG -12 Series is a cost-effective, feature -packed
series of non -coded manual fire alarm pull stations. It was
designed to meet multiple applications with the installer and
end-user in mind. The BG -12 Series features a variety of mod-
els including single- and dual -action versions.
The BG -12 Series provides Fire -Lite Alarm Control Panels
FACPs), as well as other manufacturers' controls, with a man-
ual alarm initiating input signal. Its innovative design, durable
construction, and multiple mounting options make the BG -12
Series simple to install, maintain, and operate.
Features
Aesthetically pleasing, highly visible design and color.
Attractive contoured shape and light textured finish.
Meets ADA 5 Ib. maximum pull -force.
Meets UL 38, Standard for Manually Actuated Signaling Boxes.
Easily operated(single- or dual -action), yet designed to pre-
vent false alarms when bumped, shaken, or jarred.
PUSH IN/PULL DOWN handle latches in the down position to
clearly indicate the station has been operated.
The word "ACTIVATED" appears on top of the handle in
bright yellow, further indicating operation of the station.
Operation handle features white arrows showing basic opera-
tion direction for non -English-speaking persons.
Braille text included on finger -hold area of operation handle
and across top of handle.
Multiple hex- and key -lock models available.
U.S. patented hex -lock needs only a quarter -turn to lock/
unlock.
Station can be opened for inspection and maintenance with-
out initiating an alarm.
Product ID label viewable by simply opening the cover; label
is made of a durable long -life material.
The words "NORMAL" and "ACTIVATED" are molded into the
plastic adjacent to the alarm switch (located inside).
Four -position terminal strip molded into backplate.
Terminal strip includes Phillips combination -head captive 8/32
screws for easy connection to Initiating Device Circuit (IDC).
Terminal screws backed -out at factory and shipped ready to
accept field wiring (up to 12 AWG/3.1 mm2).
Terminal numbers are molded into the backplate, eliminating
the need for labels.
Switch contacts are normally open.
Can be surface -mounted (with SB -10 or SB -1/0) or semi -
flush mounted. Semi -flush mount to a standard single -gang,
double -gang, or 4" (10.16 cm) square electrical box.
Backplate is large enough to overlap a single -gang backbox
cutout by 1/2" (1.27 cm).
Optional trim ring (BG12TR).
Spanish versions (FUEGO) available (BG-12LSP, BG-12LPSP).
Designed to replace the Fire -Lite legacy BG -10 Series.
Models packaged in attractive, clear plastic (PVC), clam-
shell -style, Point -of -Purchase packages. Packaging includes
a cutaway dust/paint cover in shape of pull station.
Construction
R
Cover, backplate and operation handle are all molded of
durable polycarbonate material.
Cover features white lettering and trim.
Red color matches System Sensor's popular SpectrAlert®
Advance horn/strobe series.
Operation
The BG -12 manual pull stations provide a textured finger -hold
area that includes Braille text. In addition to PUSH IN and PULL
DOWN text, there are arrows indicating how to operate the sta-
tion, provided for non -English-speaking people.
Pushing in and then pulling down on the handle activates the
normally -open alarm switch. Once latched in the down position,
the word "ACTIVATED" appears at the top in bright yellow, with a
portion of the handle protruding at the bottom as a visible flag.
Resetting the station is simple: insert the key, twist one quarter -
turn, then open the station's front cover, causing the spring-
loaded operation handle to return to its original position. The
alarm switch can then be reset to its normal (non -alarm) position
manually (by hand) or by closing the station's front cover, which
automatically resets the switch.
DF -52004:A1 •04/22/08 — Page 1 of 2
41
Specifications
PHYSICAL SPECIFICATIONS:
52004dim.V
ELECTRICAL SPECIFICATIONS:
Switch contact ratings: gold-plated; rating 0.25 A @ 30 VAC or
VDC.
ENGINEERING/ARCHITECTURAL SPECIFICATIONS
Manual Fire Alarm Stations shall be non -code, with a key- or
hex -operated reset lock in order that they may be tested, and so
designed that after actual Emergency Operation, they cannot be
restored to normal except by use of a key or hex. An operated
station shall automatically condition itself so as to be visually
detected as activated. Manual stations shall be constructed of
red colored LEXAN (or polycarbonate equivalent) with clearly
visible operating instructions provided on the cover. The word
FIRE shall appear on the front of the stations in white letters,
1.00 inches (2.54 cm) or larger. Stations shall be suitable for
surface mounting on matching backbox SB -10 or SB -1/0; or
semi -flush mounting on a standard single -gang, double -gang, or
4" (10.16 cm) square electrical box, and shall be installed within
the limits defined by the Americans with Disabilities Act (ADA) or
per national/local requirements. Manual Stations shall be Under-
writers Laboratories listed.
NOTE: *The words "FIRE/FUEGO" on the BG-12LSP shall appear
on the front of the station in white letters, approximately 3/4"
1.905 cm) high.
Agency Listings and Approvals
The listings and approvals below apply to the BG -12 Series pull
stations. In some cases, certain modules may not be listed by -
certain approval agencies, or listing may be in process. Consult
factory for latest listing status.
C(UL)US: S711
FM Approved
CSFM:7150-0075:184
MEA: 67-02-E
Patented: U.S. Patent No. D428,351; 6,380,846; 6,314,772;
6,632,108.
Product Line Information
BG -12S: Single-action pull station with pigtail connections, hex
lock.
BG-12SL: Same as BG -12 with key lock.
BG -12: Dual -action pull station with SPST N/O switch, screw
terminal connections, hex lock.
BG -12L: Same as BG -12 with key lock.
BG-12LSP: Same as BG -12L with English/Spanish (FIRE/
FUEGO) labeling.
BG-12LOB: Same as BG -12L with `outdoor use" listing.
Includes outdoor listed backbox, and sealing gasket.
BG-12LO: Same as BG -12L with "outdoor use" listing. Does
not include backbox.
BG-12LA: Same as BG -12L with auxiliary contacts.
BG-12LPS: Dual -action pull station with pre -signal option.
BG-12LPSP: Same as BG-12LPS with English/Spanish (FIRE/
FUEGO) labeling.
SB -10: Surface -mount backbox, metal.
SB -I/O: Surface -mount backbox, plastic. (Included with BG-
12LOB.)
BG12TR: Optional trim ring for semi -flush mounting.
17003: Keys, set of two. (Included with key -lock pull stations.)
17007: Hex lock, 9/64". (Included with hex -lock pull stations.)
NOTE: For addressable BG-12LX models, see data sheet DF -
52013.
Fire -Lite® Alarms, SpectrAlert® Advance, and System Sensor@ are
registered trademarks of Honeywell International Inc.
02008 by Honeywell International Inc. All rights reserved. Unauthorized use
of this document is strictly prohibited.
This document is not intended to be used for installation purposes.
I® 98®1 We try to keep our product information up-to-date and accurate.
We cannot cover all specific applications or anticipate all requirements.
BICINEERINC S MANEFACTURINC All specifications are subject to change without notice.
QUALITY SYSTEMS Made in the U.S. A.
For more information, contact Fire -Lite Alarms. Phone: (800) 627-3473, FAX: (877) 699-4105.
www.firelite.com
Page 2 of 2 — DF -52004:A1 •04/22/08
pull station SB -1/0 SB -10
Height
5.5 inches 5.601 inches 5.5 inches
13.97 cm) 14.23 cm) 13.97 cm)
Width
4.121 inches 4.222 inches 4.121 inches
10.47 cm) 10.72 cm) 10.47 cm)
Depth
1.39 inches 1.439 inches 1.375 inches
3.53 cm) 3.66 cm) 3.49 cm)
52004dim.V
ELECTRICAL SPECIFICATIONS:
Switch contact ratings: gold-plated; rating 0.25 A @ 30 VAC or
VDC.
ENGINEERING/ARCHITECTURAL SPECIFICATIONS
Manual Fire Alarm Stations shall be non -code, with a key- or
hex -operated reset lock in order that they may be tested, and so
designed that after actual Emergency Operation, they cannot be
restored to normal except by use of a key or hex. An operated
station shall automatically condition itself so as to be visually
detected as activated. Manual stations shall be constructed of
red colored LEXAN (or polycarbonate equivalent) with clearly
visible operating instructions provided on the cover. The word
FIRE shall appear on the front of the stations in white letters,
1.00 inches (2.54 cm) or larger. Stations shall be suitable for
surface mounting on matching backbox SB -10 or SB -1/0; or
semi -flush mounting on a standard single -gang, double -gang, or
4" (10.16 cm) square electrical box, and shall be installed within
the limits defined by the Americans with Disabilities Act (ADA) or
per national/local requirements. Manual Stations shall be Under-
writers Laboratories listed.
NOTE: *The words "FIRE/FUEGO" on the BG-12LSP shall appear
on the front of the station in white letters, approximately 3/4"
1.905 cm) high.
Agency Listings and Approvals
The listings and approvals below apply to the BG -12 Series pull
stations. In some cases, certain modules may not be listed by -
certain approval agencies, or listing may be in process. Consult
factory for latest listing status.
C(UL)US: S711
FM Approved
CSFM:7150-0075:184
MEA: 67-02-E
Patented: U.S. Patent No. D428,351; 6,380,846; 6,314,772;
6,632,108.
Product Line Information
BG -12S: Single-action pull station with pigtail connections, hex
lock.
BG-12SL: Same as BG -12 with key lock.
BG -12: Dual -action pull station with SPST N/O switch, screw
terminal connections, hex lock.
BG -12L: Same as BG -12 with key lock.
BG-12LSP: Same as BG -12L with English/Spanish (FIRE/
FUEGO) labeling.
BG-12LOB: Same as BG -12L with `outdoor use" listing.
Includes outdoor listed backbox, and sealing gasket.
BG-12LO: Same as BG -12L with "outdoor use" listing. Does
not include backbox.
BG-12LA: Same as BG -12L with auxiliary contacts.
BG-12LPS: Dual -action pull station with pre -signal option.
BG-12LPSP: Same as BG-12LPS with English/Spanish (FIRE/
FUEGO) labeling.
SB -10: Surface -mount backbox, metal.
SB -I/O: Surface -mount backbox, plastic. (Included with BG-
12LOB.)
BG12TR: Optional trim ring for semi -flush mounting.
17003: Keys, set of two. (Included with key -lock pull stations.)
17007: Hex lock, 9/64". (Included with hex -lock pull stations.)
NOTE: For addressable BG-12LX models, see data sheet DF -
52013.
Fire -Lite® Alarms, SpectrAlert® Advance, and System Sensor@ are
registered trademarks of Honeywell International Inc.
02008 by Honeywell International Inc. All rights reserved. Unauthorized use
of this document is strictly prohibited.
This document is not intended to be used for installation purposes.
I® 98®1 We try to keep our product information up-to-date and accurate.
We cannot cover all specific applications or anticipate all requirements.
BICINEERINC S MANEFACTURINC All specifications are subject to change without notice.
QUALITY SYSTEMS Made in the U.S. A.
For more information, contact Fire -Lite Alarms. Phone: (800) 627-3473, FAX: (877) 699-4105.
www.firelite.com
Page 2 of 2 — DF -52004:A1 •04/22/08
F1- Quick disconnect
tabs, 0.187" x 0.032%
Mate with AMP. INC.
FASTON "187" series
OR —
F2 - Quick disconnect
tabs, 0.250" x 0.032"
Mate with AMP. INC
FASTON "250" series
LWJ
F1 F2
jJ'
1-32 1 {-3.4-1
Ll- T 4 75 T635
1--6.35-1 1--7.95--f
x0.8 x08
E> T
W
ry
SOM/C
HT H
DUEL Ps -13]d E1
L
Absorbent Glass Mat (AGM) technology for superior
performance
Valve regulated, spill proof construction allows safe
operation in any position
Power/volume ratio yielding unrivaled energy density
Rugged impact resistant ABS case and cover (UL94-HB)
Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and
C.A.B. certified
U.L. recognized under file number MH 20845
Nominal Voltage........................................................................ 12 volts (6 cells)
Nominal Capacity
20 -hr. (350mA to 10.50 volts)........................................................ 7.00 AH
10 -hr. (650mA to 10.50 volts) ....................................................... 6.50 AH
5 -hr. (1.2A to 10.20 volts)............................................................ 6.00 AH
1 -hr. (4.5A to 9.00 volts).............................................................. 4.50 AH
15 -min. (14A to 9.00 volts)................................................................. 3.50 AH
Approximate Weight........................................................... 4.80 lbs. (2.18 kg)
Energy Density (20 -hr. rate) ................................ 1.49 W-h/in3 (90.95 W -h/1)
Specific Energy (20 -hr. rate) .............................. 17.50 W-h/Ib (38.58 W-h/kg)
Internal Resistance (approx.)...................................................... 23 milliohms
Max Discharge Current (7 Min.) ............................................... 21.0 amperes
Max Short -Duration Discharge Current (10 Sec.) .................. 70.0 amperes
Shelf Life (% of nominal capacity at 68°F 20°C))
1 Month...................................................................................................... 97%
3 Months..................................................................................................... 91%
6 Months.................................................................................................... 83%
Operating Temperature Range
Charge............................................................. -4 ° F (-20a C) to 122o F (50o C)
Discharge........................................................40 ° F (-40 ° C) to 140o F (60 ° C)
Case...................................................................................................... ABS Plastic
Tolerances are +/- 0.04 in. (+/- lmm) and +/- 0.08 in. (+/- 2mm) for Power -Sonic Chargers ................................................ PSC -12800A, 1280OA-C
height dimensions. All data subject to change without notice.
Shelf Life & Storage
e 100
CUSTOMER SERVICE TECHNICAL SUPPORT
gisnotZznecessary
Tel: +1-619-661-2020 Tel: +1-619-661-2030 Tel: +1-619-661-2020
unless
p
Fax: +1-619-661-3648 Fax: +1-619-661-3648
100% of capacity
final
Voltage
10.5V
support@power-sonic.com
is required.
80
5°C Charging before
CC 41°F)
use is necessary
to help recover
40°C
full capacity.
a; 60
K
Charge may fail
Z!1 40°C 3 °C 20°C
to restore full
capacity. Do not
ci 40 104°F) (86°F) (68oF) let batteries reach
M
2. Charge Current: 0.1C
3. Ambient Temperature: 20°C to 25°C (68°F to 77°F)
this state.
CLM
0U
0 2 4 6 8 10 12 14 16 18 20
Standing Period (Months)
Discharge Time vs. Discharge Current
20
15
10
y
L
5
E
ro 2
rn
M
v 1
o
30
E
109.
0V (
104°F)
68°F)
32°F)
5
14.0
13.0
8.0
Discharge Characteristics
1',,,,., 111, 1
X111\ 1111''""
I
mill U11110
1.2 2.4 6 12 24 36 48 1 2 4 6 810 20 40
min - I- h -1
Discharge Time
F 100
Z'
8v 0
IS
m 60
U
c 40
ami 20
m
0
120
100
80
Life Characteristics in Stand -By Use
I I I Ambient Temperature 20`C (68-F)
Float Charging Voltage
2.25 - 2.30 V/Cell
0 1 2 3 4
Years
Life Characteristics in Cyclic Use .
CUSTOMER SERVICE TECHNICAL SUPPORT INTERNATIONAL SALES
Tel: +1-619-661-2020 Tel: +1-619-661-2030 Tel: +1-619-661-2020 Tel: +1-650-364-5001
Fax: +1-619-661-3650 Fax: +1-619-661-3648 Fax: +1-619-661-3648 Fax: +1-650-366-3662
national-sales@power-sonic.com
final
Voltage
10.5V
support@power-sonic.com intemaUonal-sales@power-sonic.com
CORPORATE OFFICE • 7550 Panasonic Way • San Diego, CA 92154 • USA • Tel: +1-619-661-2020 • Fax: +1-619-661-3650 0211 1M
10.2V
9.6V
40°C
zo°c
0°C
8.1 V
Discharge
E
109.
0V (
104°F)
68°F)
32°F)
5
14.0
13.0
8.0
Discharge Characteristics
1',,,,., 111, 1
X111\ 1111''""
I
mill U11110
1.2 2.4 6 12 24 36 48 1 2 4 6 810 20 40
min - I- h -1
Discharge Time
F 100
Z'
8v 0
IS
m 60
U
c 40
ami 20
m
0
120
100
80
Life Characteristics in Stand -By Use
I I I Ambient Temperature 20`C (68-F)
Float Charging Voltage
2.25 - 2.30 V/Cell
0 1 2 3 4
Years
Life Characteristics in Cyclic Use .
0
0 200 400 600 800 1000 1200
Number of Cycles
Please refer to our website www.power-sonic.com for a complete range of useful
downloads, such as product catalogs, material safety data sheets (NISDS), ISO
certification, etc..
DOMESTIC SALES CUSTOMER SERVICE TECHNICAL SUPPORT INTERNATIONAL SALES
Tel: +1-619-661-2020 Tel: +1-619-661-2030 Tel: +1-619-661-2020 Tel: +1-650-364-5001
Fax: +1-619-661-3650 Fax: +1-619-661-3648 Fax: +1-619-661-3648 Fax: +1-650-366-3662
national-sales@power-sonic.com customer-service@power-sonic.com support@power-sonic.com intemaUonal-sales@power-sonic.com
CORPORATE OFFICE • 7550 Panasonic Way • San Diego, CA 92154 • USA • Tel: +1-619-661-2020 • Fax: +1-619-661-3650 0211 1M
Discharge Discharge Discharge
Depth 100% Depth 50 % Depth 30
1. Discharge Current 0.2C (Final Voltage 1.7V/Cell)
2. Charge Current: 0.1C
3. Ambient Temperature: 20°C to 25°C (68°F to 77°F)
0
0 200 400 600 800 1000 1200
Number of Cycles
Please refer to our website www.power-sonic.com for a complete range of useful
downloads, such as product catalogs, material safety data sheets (NISDS), ISO
certification, etc..
DOMESTIC SALES CUSTOMER SERVICE TECHNICAL SUPPORT INTERNATIONAL SALES
Tel: +1-619-661-2020 Tel: +1-619-661-2030 Tel: +1-619-661-2020 Tel: +1-650-364-5001
Fax: +1-619-661-3650 Fax: +1-619-661-3648 Fax: +1-619-661-3648 Fax: +1-650-366-3662
national-sales@power-sonic.com customer-service@power-sonic.com support@power-sonic.com intemaUonal-sales@power-sonic.com
CORPORATE OFFICE • 7550 Panasonic Way • San Diego, CA 92154 • USA • Tel: +1-619-661-2020 • Fax: +1-619-661-3650 0211 1M
9 2011. Yower-bonic Uorporation. All rights reserved. All trademarks are the property of their respective owners.
GENESIS SERIES
Description: 16 AWG 2/C SOL FPL-CL2
Compliance: UL Standards 13 & 1424; NEC Articles 725 & 760
Construction:
Conductor 16 AWG Solid Bare Copper
No. of Conductors 2
Jacket
Type PVC
Color Red
Thickness 0.015" nom.
Diameter 0.158" nom.
Legend (Ink Print) HONEYWELL P/N 4111 2C16 E175105 (UL) FPL OR CL2 SUN RES 75C (RoHS)
W/O# XXXXXX-XXXXXX XXXXX FT DEVICE/ZONE A B C D E F 1 2 3 4 5 6 7 8 9
Properties:
Insulation
Type Polypropylene
Color Black, Red
Thickness 0.006" nom.
Diameter 0.062" nom.
Lay Length 4.2" nom
Jacket
Type PVC
Color Red
Thickness 0.015" nom.
Diameter 0.158" nom.
Legend (Ink Print) HONEYWELL P/N 4111 2C16 E175105 (UL) FPL OR CL2 SUN RES 75C (RoHS)
W/O# XXXXXX-XXXXXX XXXXX FT DEVICE/ZONE A B C D E F 1 2 3 4 5 6 7 8 9
Properties:
Temperature Rating 20 to 75 oC
Operating Voltage 300 Volts max.
Capacitance 20 pf/ft nom.
Impedance 81 Ohms nom.
DC Resistance 4.15 Ohms/M' at 20oC
Flame Rating UL 1685 Vertical Tray
REV A 09/01/10 OA