HomeMy WebLinkAbout2408 Lake Aven a°�iJ
D
CITY OF SANFORD
BUILDING & FIRE PREVENTION
PERMIT APPLICATION
Application No: . I tj -3007
Documented Construction Value: $ 4,300.00
Job Address: 2408 LAKE AVE SANFORD, FL 32771 Historic District: Yes ❑ No ❑
Parcel ID: 36-19-30-524-0700-0150 Residential ® Commercial ❑
Type of Work: New ❑ Addition ❑ Alteration ❑ Repair ❑ Demo ❑ Change of Use ❑ Move ❑
Description of Work: Remove existing asphalt shingle and replace with new asphalt shingle
Plan Review Contact Person: Yordanys Hector Title: Contractor
Phone: 407.802.9897 Fax: 407.567.9012 Email: RoofDepot@icloud.com
Property Owner Information
Name LAINt Phone:
Street: 311a W%-, Ja^',v,, f Resident of property?: K)
City, State Zip: C,6AD.A> SC 37_ 7 G
Contractor Information
Name Roof Depot Inc.
Street: CCC1330134
City, State Zip: Orlando, FL 32825
Phone: 407.802.9897
Fax: 407.567.9012
State License No.: CCC1330134
Architect/Engineer Information
Name: Phone:
Street:
City, St, Zip:
Bonding Company:
Address:
Fax:
E-mail: _
Mortgage Lender:
Address:
WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY RESULT IN YOUR
PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. A NOTICE OF COMMENCEMENT MUST BE
RECORDED AND POSTED ON THE JOB SITE BEFORE THE FIRST INSPECTION. IF YOU INTEND TO OBTAIN
FINANCING, CONSULT WITH YOUR LENDER OR AN ATTORNEY BEFORE RECORDING YOUR NOTICE OF
COMMENCEMENT.
Application is hereby made to obtain a permit to do the work and installations as indicated. I certify that no work or installation has
commenced prior to the issuance of a permit and that all work will be performed to meet standards of all laws regulating construction
in this jurisdiction. I understand that a separate permit must be secured for electrical work, plumbing, signs, wells, pools,
furnaces, boilers, heaters, tanks, and air conditioners, etc.
FBC 105.3 Shall be inscribed with the date of application and the code in effect as of that date: 5t° Edition (2014) Florida Building Code
Revised: June 30, 2015 Permit Application ' / 70,00
NOTICE: In addition to the requirements of this permit, there may be additional restrictions applicable to this property that may be
found in the public records of this county, and there may be additional permits required from other governmental entities such as water
management districts, state agencies, or federal agencies.
Acceptance of permit is verification that I will notify the owner of the property of the requirements of Florida Lien Law, FS 713.
The City of Sanford requires payment of a plan review fee at the time of permit submittal. A copy of the executed contract is required
in order to calculate a plan review charge and will be considered the estimated construction value of the job at the time of submittal.
The actual construction value will be figured based on the current ICC Valuation Table in effect at the time the permit is issued, in
accordance with local ordinance. Should calculated charges figured off the executed contract exceed the actual construction value,
credit will be applied to your permit fees when the permit is issued.
OWNER'S AFFIDAVIT: I certify that all of the foregoing information is accurate and that all work will
be done in compliance with all applicable laws regulating construction and zoning.
2C>{6
gna re of Own /Ag Date Signa of etor/Agent Date
Print Owner/Agent's Name ontractor/Ag
St'lame
rP
porn+poe��,,� TANYA RODRIGUEZ JAM RODRIGUEZ
Notary Public - State of Florida , _ ry Public -State of Florida
:oma; y •o
My Comm. Expires Mar 2.2017 ma; My Comm. Expires Mar 2, 2017
e d? Commission # EE 873641 %''� Commission # EE 673641
Owner/Agent is ersonally n WE t Me or Contractor/Agent is Personall own to Me or
Produced ID Type of ID L Produced ID Contractor/Agent
of ID
BELOW IS FOR OFFICE USE ONLY
Permits Required: Building ❑ Electrical ❑ Mechanical ❑ Plumbing❑ Gas[] Roof
Construction Type: Occupancy Use: Flood Zone:
Total Sq Ft of Bldg: Min. Occupancy Load: # of Stories:
New Construction: Electric - # of Amps Plumbing - # of Fixtures
Fire Sprinkler Permit: Yes ❑ No ❑ # of Heads ]Fire Alarm Permit: Yes ❑ No ❑
APPROVALS: ZONING: UTILITIES: WASTE WATER:
ENGINEERING: FIRE: BUILDING: 5r 11- ►�/- I(o
COMMENTS:
Revised: June 30, 2015 Permit Application
Tel. 32121; ROOF'
Fax. 407 567 9012 ,
Email. RoofDepot@iCioud.com-4/1111111
390 North Orange Ave. Roof Depot Inc -
Suite 2300 Of Yave Wre Cnterprlses Inc C
Orlando, FI. 32801 Our Experience Makes The Difference a
www.RoofDepotFlorida.com www_RoofDopotFlorida.com
Bill To:
Estimate
FL. Estate License No.
CCC1330134
Estimate No: 2190
Date: Nov 8, 2016
Luis Rodrigues / 2408
2408 S Lake Ave
Sanford, FL 32771
Code
DescriptionQuantity
Rate
Amount
2001
REMOVE EXISTING ASPHALT SHINGLE ROOF AND HAUL AWAY
DEBRIS
1
$0.00
$0.00
RPT
ROOF PERMIT
1
$0.00
$0.00
8003
RE NAIL ROOF DECKING
1
$0.00
$0.00
8009
INSTALL 30 YRS ASPHALT SHINGLE ARCH_ STYLE _TBD
RAND_ TBD'- COLOR SHINGLE x_ 130 mph
1
$3,917.45
$3,917.45
8004-03
DRY IN WITH 30# SYNTHETIC BLEND FELT UNDERLAYMENT
1
$0.00
$0.00
8005
INSTALL 21/7' DRIP EDGE _white_ COLOR
1
$0.00
$0.00
8007
INSTALL NEW LED PIPES1.5'_XX 2" _X 3"4" GOOSE NECK
X 4" 6" 10"
1
$0.00
$0.00
rRCHSYS
MODIFIED BITUMEN ROOFING SYSTEM
1
$550.00
$550.00
rCH12B
DRY IN WITH _75 LBS FIBER GLASS BASE SHEET
1
$0.
$0.
rCH14C
INSTALL CAP SHEET 4.2mm (168 mills) THICK _ white _ COLOR
1
$0.00
$0.
8010
CLEAN GROUNDS THOROUGHLY 8 RUN MAGNET
1
$0.
$0.00
WOOD CHANGE WILL BE CHARGED AT $45.00 PER PLYWOOD Subtotal $4,467.45
AND UP TO $4.25 OR LESS PER UNEAR FOOT OF WOOD.
BEFORE AND AFTER PICTURES WILL BE TAKEN OF THE
WOOD. Discount $167.45
HOMEOW
Sign
l!el�
Print -IF, Total $4,300.00
Date
ROOF DEPO
Signature
Print
Date
�v Permit N..
Folio/Par 'e IL 9-30-524-0700-0150
Prepared by: ' Roof Depot Inc.
Return to: 2156 Sunset Terrace Dr.
Orlando FI 32825
MARYANNE MORSE, SEMINOLE COUNTY
CLERK OF CIRCUIT COURT h COMPTROLLER
BY, 8803 Ps 1041 QP9s)
CLERIC'S T 2016117232
RECORDED 11/09/2016 12:2400 PM
RECORDING FEES $10.00
RECORDED BY hdevore
NOTICE OF COMMENCEMENT
State of Florida, County of Oranger •"'.....10
pw
The undersigned hereby gives notice that improvement will be made to certain real property, and inordance•: s;,
with Chapter 713, Florida Statutes, the following information is provided in this Notice of CommencesN'et.
1. Description of property (legal description of the property, and street address if available) �
LOT 15 BLK 7 3RD SEC DREAMWOLD PB 4 PG 70
d
2. General description of improvement o�
Re -Roof �
3. Owner
if the Lessee contracted for the improvement
Address 2408 LAKE AVE STANFORD, FL 32771
Interest in Property
Name and address of fee simple titleholder (if different from Owner listed above)
4. Contractor "' o o \j I
Name Roof Depot Inc Telephone Number (407)7 5-211 W }
Address 2156 Sunset Terrace Dr. Orlando, FL 32825 its v
5. Surety (if applicable, a copy of the payment bond is attached)
Name Telephone Number
Address Amount of Bond $
6. Lender
Name Telephone Number
Address
7. Persons within the State of Florida designated by Owner upon whom notices or other documents may
be served as provided by §713.13(1)(a)7, Florida Statutes.
Name Telephone Number
Address
8. In addition to himself or herself, Owner designates the following to receive a copy of the Lienor's
Notice as provided in §713.13(1)(b), Florida Statutes.
Name Telephone Number
Address
9. Expiration date of notice of commencement (the expiration date will be 1 year from the date of recording
unless a different date is specified)
WARNING TO OWNER: ANY PAYMENTS MADE BY THE OWNER AFTER THE EXPIRATION OF THE NOTICE OF COMMENCEMENT
ARE CONSIDERED IMPROPER PAYMENTS UNDER CHAPTER 713, PART I, SECTION 713.13, FLORIDA STATUTES, AND CAN
RESULT IN YOUR PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. A NOTICE OF COMMENCEMENT MUST BE
RECORDED AND POSTED ON THE JOB SITE BEFORE THE FIRST INSPECTION. IF YOU INTEND TO OBTAIN FINANCING, CONSULT
WITH YOUR LNLWE"R AN ATTORNEY BEFORE COMMENCING WORK OR RECORDING YOUR NOTICE OF COMMENCEMENT.
OwnePoL ee, or Owner s or Lessee's Authorized Officer/Diredor/Partfficener/Manager Signatory's Title/Oent was acknowledged before me this -.I- day of 1�101, by l t wks- c -Z
monTlWyyea� name of person
as for
Type of authority, e.g., officer, trustee, attorney in fact
ig . ure of Notary 7RTred
i to Florida /
Personally Known IDType of ID Producedf&
Form content revised: 01/23/14
Name of party on behalf of whom instrument was executed
Print, type, or stamp commissioned name of Notary Public
TANM RODRIGUEZ
Notary Public - Stale of Florida
�oT My Comm. Expires tJlar 2. 2017
Commission EE 873641
RECORD COPY
MIAIJ D
" 1®
MINA -DADS COUNTY
PRODUCT CONTROL SECfION
11805 SW 26 Street, Room 208
DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER) Miami, Florida 33175-2474
BOARD AND CODE ADMINISTRATION DIVISION T(786)315-2590 F (786) 315-2599
NOTICE OF ACCEPTANCE (NOA) www.miamidndaeov/economv
GAF
1 Campus Drive
Parsippany, NJ 07054
SCOPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction
materials. The documentation submitted has been reviewed and accepted by Miami -Dade County RER -
Product Control Section to be used in Miami Dade County and other areas where allowed by the
Authority Having Jurisdiction (AHJ).
This NOA shall not be valid after the expiration date stated below. The Miami -Dade County Product
Control Section (In Miami Dade County) and/or the AHJ (in areas other than Miami Dade County)
reserve the right to have this producror material tested for quality assurance purposes. If this product or
material fails to perform in the accepted manner, the manufacturer will incur the expense of such testing
and the AHJ may immediately revoke, modify, or suspend the use of such product or material within
their jurisdiction. RER reserves the right to revoke this acceptance, if it is determined by Miami -Dade
County Product Control Section that this product or material fails to meet the requirements of the
applicable building code.
This product is approved as described herein, and has been designed to comply with the Florida Building
Code including the High Velocity Hurricane Zone of the Florida Building Code.
DESCRIPTION: GAF Ruberoid®Modified Bitumen Roof System for Wood Decks.
LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state
and following statement: "Miami -Dade County Product Control Approved", unless otherwise noted
herein.
RENEWAL of this NOA shall be considered after a renewal application has been filed and thele has
been no change in the applicable building code negatively affecting the performance of this product.
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or
change in the materials, use, and/or manufacture of the product or process. Misuse of this NOA as an
endorsement of any product, for sales, advertising or any other purposes shall automatically terminate
this NOA. Failure to comply with any section of this NOA shall be cause for• termination and removal of
NOA.
ADVERTISEMENT: The NOA number preceded by the words Miami -Dade County, Florida, and
followed by the expiration date may be displayed in advertising literature. If any portion of the NOA is
displayed, then it shall be done in its entirety.
INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its
distributors and shall be available for inspection at the job site at the request of the Building Oficial.
This NOA renews and revises NOA No. 14-0611.01 and consists of pages 1 through 30.
The submitted documentation was reviewed by Jorge L. Acebo.
REVIeWgg poll W COMPUANOE
PLANS EXAMINER
11-14-k6
MIAMMADE COUNTY
A PERMIT ISSUED SHAUL E&J5ONSTRUED TO BE A
LICENSE TO PRYDEWORKANDNOTAS
AUTHORITY TCEL, ALTER OR SET
ASIDE ANY OF S OF THE TECHNICAL
CODES, NOR SHOF A PERMIT PREVENT
THE BUILDIOM THEREAFTER
REQUIRING A CORRECTION OF ERRORS IN PLANS,
CONSTRUCTION OR VIOLATIONS OF THIS CODE
a
#16-3007
NOA No.: 14-1030.02
Expiration Date: 11/06/18
Approval Date: 11/05/15
Page I of 30
Fastening GAFGLAS® #75 Base Sheet or any of above base sheets attached to deck with
Options: Drill -Tec'" #12 Fastener, Drill -Ted" #14 Fastener or Drill-Tec'XHD Fastener
(Continued) and Drill -Tec' 3" Steel Plate, Drill -Tec' AccuTrac® Flat Plate or Drill -Tec'
AccuTrac® Recessed Plate installed 8" o.c. in 4 rows. One row is in the 2" side
lap. The other rows are equally spaced approximately 9" o.c. in the field of the
sheet.
(Mt"intum Design Pressure —75 psJ. See Genera! Limitation #7)
Ply Sheet: (Optional) One or more plies GAFGLAS® Ply 4, GAFGLAS® FlexPly' 6,
GAFGLAS® #80 Ultima Base Sheet, Ruberoid® Mop Smooth or Ruberoido 20
sheet adhered in a full mopping of approved asphalt applied within the EVT range
and at a rate of 20-40 lbs./sq.
Membrane: One or more plies of Ruberoid® Mop Smooth, Ruberoid® Mop 170 FR, Ruberoid°
Mop Granule, RootMatch` SBS Modified Granular, RuberoidoMop Plus
Granule, Ruberoid®20, Ruberoid®30, Ruberoid®EnergyCap" 30 FR SBS
Membrane, Ruberoid®30 FR or Ruberoid®Mop FR in adhered in a full mopping
of approved asphalt applied within the EVT range and at a rate of 2040 lbs./sq.
Or
One or more plies of Ruberoido Mop Smooth, Ruberoid® Mop Granule,
RoofMatch"' SBS Modified Granular, Ruberoid® Mop 170 FR, Ruberoid® Mop
Plus Granule, Ruberoid'20, Ruberoid' 30, Ruberoid®EnergyCap"30 FR SBS
Membrane, Ruberoid® 30 FR or Ruberoid® Mop FR adhered in MatrixTM 102 SBS
Membrane Adhesive at an application rate of 1-2 gal./sq.
Surfacing: Optional on granular surfaced membranes; required for smooth membranes.
Chosen components must be applied according to manufacturer's application
instructions. All coatings must be listed within a current NOA.
1. Gravel or slag applied at 400 lbs./sq. and 300 lbs./sq. respectively in a flood coat
of Approved asphalt at 60 lbs./sq.
2. GAFGLAS® Mineral Surfaced Cap Sheet, Tri -Ply® Mineral Surfaced Cap Sheet
or GAFGLASIEnergyCapT" BUR Mineral Surfaced Cap Sheet adhered in a full
mopping of approved asphalt applied within the EVT range and at a rate of 2040
lbs./sq:
3. Topcoat® Membrane, Topcoat® MB Plus (to be used as a primer with Topcoat®
Membrane) or Topcoat® Surface Seal SB applied at l tol.5 gal./sq.
Maximum Design
Pressure:
MIAMMADE COUNTY
See Fastening Options
NOA No.: 14-1030.02
Expiration Date: 11/06/18
Approval Date: 11/05/15
Page 27 of 30
Membrane Type: APP/SBS Heat Weld
Deck Type 1: Wood, Non -insulated
Deck Description: 19/32" or greater plywood or wood plank decks
System Type E(2): Base sheet mechanically fastened.
All General and System Limitations shall apply.
Fire Barrier: FireOut' Fire Barrier Coating, VersaShield® Fire -Resistant Roof Deck
(optional) Protection or Securock* Gypsum -Fiber Roof Board.
Base sheet: GAFGLAS' 480 Ultima Base Sheet, GAFGLAS® Stratavent4D Eliminator'
Nailable Venting Base Sheet, Ruberoid® Mop Smooth, Ruberoid® 20, Ruberoid®
SBS Heat -Weld" Smooth or Ruberoid® SBS Heat -Weld" 25 mechanically
fastened to deck as described below;
Fastening GAFGLASO Ply 4, GAFGLAS® FlexPly". 6, GAFGLAS® #75 Base Sheet or any
Options: of above base sheets attached to deck with approved annular ring shank nails and
tin caps at a fastener spacing of 9" o.c. at the lap staggered and in two rows 12"
o.c. in the field.
(Mayinnun Design Pressure —45 psf. See General Limitation #7)
GAFGLAS® Ply 4, GAFGLAS FlexPly'" 6, GAFGLAS® #75 Base Sheet or any
of above base sheets attached to deck with Drill -Tec"' # 12 Fastener, Drill -Tec'
# 14 Fastener or Drill -Tec"' XHD Fastener and Drill -Tec." 3" Steel Plate, Drill -
Tec"' AccuTrac® Flat Plate or Drill -Tec"' AccuTrac® Recessed Plate installed
12" o.c. in 3 rows. One row is in the 2" side lap. The other rows are equally
spaced approximately 12" o.c. in the field of the sheet.
(Maximum Design Pressure —45 psf See General Limitation #7)
GAFGLAS® FlexPly'" 6, GAFGLAS® #75 Base Sheet or any of above base
sheets attached to deck with approved annular ring shank nails and tin caps at a
fastener spacing of 9" o.c. at the 4" lap staggered and in two rows 9" o.c. in the
field.
(Mayinmm Design Pressure —52.5 psf. See General Limitation #7)
GAFGLAS® #80 Ultima" Base Sheets, Ruberoid®20, Ruberoid® Mop Smooth,
base sheet attached to deck with approved annular ring shank nails and tin caps at
a fastener spacing of 9" o.c. at the 4" lap staggered and in two rows 9" o.c. in the
field.
(Maximum Design Pressure —60 psf. See General Limitation #7)
GAFGLAS® #75 Base Sheet or any of above base sheets attached to deck with
Drill -Tec"' #12 Fastener, Drill -Tec'" #14 Fastener or Drill-Tec'XHD Fastener
and Drill -Tec"' 3" Steel Plate, Drill -Tec"' AccuTrae Flat Plate or Drill -Tec"'
AccuTrac* Recessed Plate installed 12" o.c. in 4 rows. One row is in the 2" side
lap. The other rows are equally spaced approximately 9" o.c. in the field of the
sheet.
(Mavimnm Design Pressure —60 psf. See General Limitation #7)
NOA No.: 14-1030.02
MIAMMADECOUNTY Expiration Date: 11/06/18
• Approval Date: 11/05/15
Page 28 of 30
Fastening Any of above base sheets attached to deck approved annular ring shank nails and
Options: 3" inverted Drill -Tec" insulation plates at a fastener spacing of 9" o.c. at the 4"
(Continued) lap staggered in two rows 9" in the field.
(Mavinrum Design Pressure —60 psf. See General Limitaliou #7)
GAFGLAS® #75 Base Sheet or any of above base sheets attached to deck with
Drill -Tec'" #12 Fastener, Drill -Tec' #14 Fastener or Drill -Tec' XHD Fastener
and Drill -Tec'" 3" Steel Plate, Drill -Tec' AccuTrac® Flat Plate or Drill -Tec"
AccuTrac® Recessed Plate installed 8" o.c. in 4 rows. One row is in the 2" side
lap. The other rows are equally spaced approximately 9" o.c. in the field of the
sheet.
(Maximum Design Pressure —75 psf. See General Limitation #7)
Ply Sheet: (Optional except over Ruberoid® Mop Smooth, Ruberoid® 20, Ruberoid® SBS
Heat-Weld"Smooth or Ruberoid® SBS Heat -Weld'" 25) One or more plies
GAFGLAS® Ply 4 or GAFGLAS® FlexPly"" 6 sheet adhered in a full mopping of
approved asphalt applied within the EVT range and at a rate of 20-40 lbs./sq. or
Ruberoid'aTorch Smooth torch applied according to manufacturer's application
instructions.
Membrane: One ply of Ruberoid®Torch Smooth, Ruberoid® Torch Granule, RoofMatch'"
APP Modified Granular, Ruberoid® EnergyCap'" Torch Granule FR, Ruberoid®
EnergyCap'" Torch Plus FR, or Ruberoid®Torch FR torch applied according to
manufacturer's application instructions.
Or
One or more plies of Ruberoid* SBS Heat -Weld'" Plus, Ruberoid® SBS Heat -
Weld' Plus FR, Ruberoid® SBS Heat -Weld'" 170 FR, Ruberoid® EnergyCap "
SBS Heat -Weld' Plus FR, Ruberoid® SBS Heat -Weld' Granule, Ruberoid® SBS
Heat -Weld' Smooth and Ruberoid® SBS Heat -Weld' 25 applied according to
manufacturer's application instructions.
Surfacing: Optional on granular surfaced membranes; required for smooth membranes.
Chosen components must be applied according to manufacturer's application
instructions. All coatings must be listed within a current NOA.
I . Gravel or slag applied at 400 lbs./sq. and 300 lbs./sq. respectively in a flood coat
of Approved asphalt at 60 lbs./sq.
2. GAFGLAS® Mineral Surfaced Cap Sheet, Tri-P1y4I Mineral Surfaced Cap Sheet
or GAFGLAS® EnergyCap' BUR Mhieral Surfaced Cap Sheet adhered in a fulI
mopping of approved asphalt applied within the EVT range and at a rate of 2040
lbs./sq.
3. Topcoat" Membrane, Topcoat* MB Plus (to be used as a primer with Topcoat*
Membrane) or Topcoat°" Surface Seal SB applied at 1 to 1.5 gal./sq.
Maximum Design
Pressure:
MAMFDADE COUN17
�V.IZIAWIAVJ
See Fastening Options
NOA No.: 14-1030.02
Expiration Date: 11/06/18
Approval Date: 11/05/15
Page 29 of 30
WOOD DECK SYSTEM Lym]TATIONS:
1 A slip sheet is required with GAFGLASO Ply 4 and GAFGLAS® FlexplyTM 6 when used as a
mechanically fastened base or anchor sheet.
2. Minimum''/," DensDeck® Roof Board or 1/2" Type X gypsum board is acceptable to be installed
directly over the wood deck.
GENERAL LIMITATIONS:
1. Fire classification is not part of this acceptance; refer to a current Approved Roofing Materials
Directory for fire ratings of this product.
2. Insulation may be installed in multiple layers. The first layer shall be attached in compliance with
Product Control Approval guidelines. All other layers shall be adhered in a full mopping of
approved asphalt applied within the EVT range and at a rate of 2040 lbs./sq., or mechanically
attached using the fastening pattern of the top layer
3. All standard panel sizes are acceptable for mechanical attachment. When applied in approved
asphalt, panel size shall be 4' x 4' maximum.
4. An overlay and/or recovery board insulation panel is required on all applications over closed cell
foam insulations when the base sheet is fully mopped. If no recovery board is used the base sheet
shall be applied using spot mopping with approved asphalt, 12" diameter circles, 24" o.c.; or strip
mopped 8" ribbons in three rows, one at each side lap and one down the center of the sheet allowing
a continuous area of ventilation. Encircling of the strips is not acceptable. A 6" break shall be
placed every 12' in each ribbon to allow cross ventilation. Asphalt application of either system shall
be at a minimum rate of 12 lbs./sq. Note: Spot attached systems shall be limited to a maximum
design pressure of 45 psf.
5. Fastener spacing for insulation attachment is based on a Minimum Characteristic Force (F') value of
275 lbf., as tested in compliance with Testing Application Standard TAS 105. If the fastener value,
as field-tested, are below 275 Ibf. insulation attachment shall not be acceptable.
6. Fastener spacing for mechanical attachment of anchor/base sheet or membrane attachment is based
on a minimum fastener resistance value in conjunction with the maximum design value listed within
a specific system. Should the fastener resistance be less than that required, as determined by the
Building Official, a revised fastener spacing, prepared, signed and sealed by a Florida Registered
Engineer, Architect, or Registered Roof Consultant may be submitted. Said revised fastener spacing
shall utilize the withdrawal resistance value taken from Testing Application Standards TAS 105 and
calculations in compliance with Roofing Application Standard RAS 117.
7. Perimeter and corner areas shall comply with the enhanced uplift pressure requirements of these
areas. Fastener densities shall be increased for both insulation and base sheet as calculated in
compliance with Roofing Application Standard RAS 117. Calculations prepared, signed and sealed
by a Florida registered Professional Engineer, Registered Architect, or Registered Roof Consultant
(When this limitation is specifically referred within this NOA, General Limitation #9 will not
be applicable.)
8. All attachment and sizing of perimeter nailers, metal profile, and/or flashing termination designs
shall conform to Roofing Application Standard RAS l 11 and applicable wind load requirements.
9. The maximum designed pressure limitation listed shall be applicable to all roof pressure zones (i.e.
field, perimeters, and corners). Neither rational analysis, nor extrapolation shall be permitted for
enhanced fastening at enhanced pressure zones (i.e. perimeters, extended corners and corners).
(When this limitation is specifically referred within this NOA, General Limitation #7 will not
be applicable.)
10. All products listed herein shall have a quality assurance audit in accordance with the Florida
Building Code and Rule 61 G20-3 of the Florida Administrative Code.
END OF THIS ACCEPTANCE
NOA No.: 14-1030.02
Expiration Date: 11/06/18
Approval Date: 11/05/15
Page 30 of 30
CITY OF SANFORD BUILDING SERVICES
Residential Re -Roof
Hurricane Mitigation Inspection Affidavit
Permit #: 16 -3f�_,.
1, "IOro s " - hereby acknowledge that 1 personally inspected
Roof deck nailing and/or Secondary water barrier work
at ZyDj L QIrG Ave, 3an6onji, A, and have determined that the work
(Job Site Address)
was done according to the Hurricane Mitigation Retrofit Manual. (based on 553.844 F.S.)
I certify that my statements herein are true and accurate to the best of my belief and that I fully
understand that making any false statements in writing with the intent to mislead a public servant in the
performance of his or her official duty shall constitute a misdemeanor of the second degree pursuant to
Section 837.0
Signature of
1 I-7-
Date
r C CC, 0A 4
Printed Mame of Contractor License #
License Type: 0 General 0 Building 0 Residential 0 Roofing Contractor
0 or any individual certified in accordance with F.S. 468 to make such an inspection.
STATE OF FLORIDA COUNTY OF D,
Sworn to (o ffirmed) and subscribed before4ne this Q_ day of M(ta., 2011 , by
�1or� eC6( ,who is 0 Personally Known to me or has roduced (type of
identificat• PC as identification.
v (SEAL)
iiinatw"e of fiota lic ;•� a00 ��,��
State of Florida " `#t
4 GZ
.r f •Oil VMS,
j�f •-. ' � .
Print/Type/Stamp Name ro�ia.w,
of Notary Public