717 Santa Barbara Dr - BR18-003259 (a) Addition Game RoomBUILDING DIVISION
ess:
AUG PERMIT APPLICATION
Application No:
0DocumentedConstructionValue: $ 50353.'
a ' 6ParcelID: 0 1 'A'D --- 30- 5, q " ',*- 0 19, Residential Commercial
Type of Work: New X Addition 0 Alteration 0 RepairEl Demo El ChangeofUse D MoveoE]
Description of Work:
Plan Review Contact Person:
Phone: AL2A22L S L- Fax: Email:
Property Owner Information
Name Phone:
Street: Resident of property? JAIC 11
City, State Zip:
Contractor Information
Name Phone:
City, State Zip:
om
Architect/Engineer Information
w.
Name: '2- 9 6- 6 10, Phone:
Street: Fax:
MMIMME= Mortgage Lender:
Comm
WARNING TO OWNER- YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY RESULT IN YOUR
PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. A NOTICE OF COMMENCEMENT MUST BE RECORDED
AND POSTED ON THE JOB SITE DEPORE THE FIRST INSPECTION. IF YOU INTEND TO OBTAIN FINANCING,
CONSULT WITH YOUR LENDER OR AN ATTORNEY BEFORE RE CORDING YOUR NOTICE OF COMMENCEMENT
Application is hereby made to obtain a permit to do the work and installations as indicated. I certify that no work or installation has commenced prior
to the issuance of a permit and that all work will be performed to meet standards ofall laws regulating construction in this jurisdiction. I understand
that a separate permit must be secured for electrical work, plumbing, signs, wells, pools, furnaces, boilers, heaters, tanks, and air conditioners,
etc.
Revised: June, 2018 Pe it Application
FBC 105.3 Shall be inscribed with the date of application and the code in effect as of that date: 60' Edition (2017) Florida Building Code
wtabi"ivebi additional restrictions aiplicable to this property that maybe found in the public
records of this county, and there may be additional permits requirea Four outer gorefujiltan.71 M-1-3
agencies, or federal agencies.
Acceptance of permit is verification that I will notify the owner ofthe property of the requirements of Florida Lien Law, FS 711
XQde&-&r-at the. time of Dermit submittal. A copy of the executed contract is required in order to
ramin
will be figured based on the current ICC Valuation Table in effect at The time tire permit it fees when the permit is issued. charges figured off the executed contract exceed the actual construction value, creditwill be applied to your perm
o'vMEWSAFFIDAV1T-. I certify that all of the foregoing information is accurate and that all work will be
done in compliance with all applicable laws regulating construction and zoning.
signature of Owner/Agent Date
t 'Y Ck,
Print Owner/Agent's Name
Signature of Notary -State ofFlorida Date
Signature ofContractor/Agent Date
Print Contractor/Agent's Name
Signature ofNotary -State of Florida Date
Owner/Agent is — Personally Known to Me or Contractor/Agent is _ Personally Known to Me or
Produced ID — Type of ID Produced ID — Type of ID
BELOW IS FOIRK-0-F-FICE USEONLY
Permits Required: Building V1 Electrical W Mechanical E[ PlumbingE] Gas E] Rooffi
QA'664- Flood Zone - Construction Type:_\4 Occupancy Use- 6tjjkj9k/-L/- i\ c' k9
Total Sq Ft of Bldg: in. Occupancy Load: of Stories: J-L—
New Construction: Electric - # of Amps Plumbing - # of Fixtures---3--
Fire Sprinkler Permit: Yes El No # of Heads — Fire Alarm Permit: Yes E] No R]
1 ,
2 UTILITIES: WASTEWATER: APPROVALS: ZONING:
ENGINEERING: FIRE: BUILDING---IAL-&, A'1'1
COMMENTS: -20—r
42
M
Revised: June, 2019
Permit Application
In addition to the requirements of this permit„ There x. Y be additional restrictions applicable to this property that may befoundinthepublicorrisofthiscounty, and there ity be additional perafts required from other govertnmentai entities such as waterM011490MANAdistricts, suite 4gorwics, or federal agencies.
Acceptatunt of it isrVrificedon that I will notify the owner ofthe property of the requirements ofFlorida Lien Latta, pS 7 M
Cite City of Sanford requires payment ofa plain review fee at the time ofpernot submittal. A copy ofthe executed contract is requiredinordertoCalculateaplanreviewchargeandwillbeconsideredthecstimidedconstructionvalueofthejobatthetimeofsubmittal. thettostionvalue 'li be fi to on the current ICC: Valuation Table in effect at the time the accordancewithlocalonfin - . Should cutated chargesfig Off w fitted con ct eac d the ae l ctt orsetionvalis issued,ue, art
Credit
will
be applied to yaw permit fees when the permit isissmd, I certify
that all r, we lcompliance
Print CMIGOW/
Asca's, Xm. 7., t RroducedID „
Type s 7-
anstruction
Type: Occupancy Use. Total Sq
l t of 13idg: : its. OccupancV Goad;# of Ito sa New Construction:
Electric w # of Amps plumbing - of Fixtures Fire Sprinkler
Permit: Yes 0 No El ii of Heads ..__ FireAlarm Permit: Yes No El E pp
t C3, .. n _... iJT11,1'fi __. _ WASTE WATER: Re'virwxt,
Juanwo.Iets ENGINEERING: FIRE:
BUILDIN'G:-,--- 1, C(
ujid?
Altamonte Springs, Casselberry, Lake Mary, Longwood, Oviedo, Sanford,
Seminole County, Winter Springs
F'Iorida Statutes are quoted here in part for your information to indicate the authority for exemptions for
homeowners from qualifying as contractors and to express any applicable restrictions and responsibilities.
BY SIGNING THIS STATEMENT, I ATTEST THAT. (Initial to the left of each statement)
I understand that state law requires construction to be done by a licensed contractor and have applied for
an owner -builder permit under an exemption from the law. The exemption specifies that 1, as the owner of
the property listed, may act as my own contractor with certain restrictions even though I do not have at\' license.
I understand that building permits are not required to be signed by a property owner unless he or she is
responsible for the construction and is not hiring a licensed contractor to assume responsibility.
I understand that, as an owner -builder, I am the responsible party of record on a permit. I understand that I
may protect myself from potential financial risk by hiring a licensed contractor and having the permit filed
in his or tier name instead of my own name. I also understand that a contractor is required by law to be
licensed in Florida and to list his or her license numbers on all permit and contracts.
I understand that I may build or improve a one -family or two -fancily residence or a firm outbuilding. I
may also build or improve a commercial building if the costs do not exceed $75,000. The building or
residence must be for my own use or occupancy. It may not be built or substantially improved for sale or
lease. If a building or residence that I have built or substantially improved myself is sold or ]eased withinQ_ in I year after the construction is complete, the law will presume that I built or substantially improved it
for sale or lease, which violates this exemption.
I understand that, as the owner -builder, I must provide direct, onsite supervision of the construction.
I understand that I may not hire an unlicensed individual person to act as my contractor or to supervise
persons working on my building or residence. It is my responsibility to ensure that the persons whom I
employ have the licenses required by law and by city ordinance.
I understand that it is a frequent practice of unlicensed persons to have the property owner obtain an
owner -builder permit that erroneously implies that the property owner is providing his or her own labor
and materials. 1, as an owner -builder, may be held liable and subjected to serious financial risk for any
injuries sustained by an unlicensed person or his or tier employees while working on my property. My
homeowner's insurance may not provide coverage for those injuries. I am willfully acting as an owner -
builder and am aware of the limits of my insurance coverage for injuries to workers on my property,
I understand that I may not delegate the responsibility for supervising work to a licensed contractor who is
not licensed to perform the work being done. Any person working on my building who Is not licensed
must work under my direct supervision and must be employed by me, which means that I must
comply with laws requiring the withholding of federal income tax and social security contributions
under the Federal Insurance Contributions Act (FICA) and must provide workers' compensation
for the employee. I understand that my failure to follow these laws may subject me to serious financial
risk.
Rev. 9.14.2009
I agree that, as the party legally and financially responsible for this proposed construction activity, I will
abide by all applicable laws and requirements that govern owner -builders as well as employers, I also
understand that the construction must comply with all applicable laws, ordinances, building codes, and
I am ofaware of constructionpractices and I have access to the Florida Building Codes. i
II
understand
that I may obtain more information regarding my obligations as an employer from the Internal Revenue
Service, the United States Small Business Administration, the Florida Department of Financial Services,
and the Florida Department of Revenue. I also understand that I may contact the Florida Construction
Industry Licensing Board at 1-850-487-1395 oi- at www.tiiyflorida.com/dbpt-/pro/`cilb/ for I
more information about licensed contractors. I
am aware of, and consent to, an owner -builder building permit applied for in my narne and understand that
I am the party legally and financially responsible for the proposed construction activity at the address listed
below. I
agree to notify the building department immediately of any additions, deletions, or changes to any of the information
that I have provided on this disclosure oi- in the permit application package. Licensed
contractors are regulated by laws designed to protect the public. If you contract with a person who
does not have a. license, the Construction Industry Licensing Board, the Department of Business and Professional
Regulation and the building department may be unable to assist you with any financial loss that
you sustain as a result of a complaint. Your only remedy against an unlicensed contractor may be in civil
court. It is also important for you to understand that, if an unlicensed contractor or employee of an individual
or firm is injured while working on your property, you may be held liable for damages. If you obtain
an owner -builder permit and wish to hire a licensed contractor, you will be responsible for verifying whether
the contractor is property licensed and the status of the contractor's workers' compensation coverage.
J
VNPropertyAddress. 1,
V el_lx cil do hereby state that I am qualified r.
and
capable of performing the, Lequestt,,
ed,
construction involved with tile permit application filed and agree to the conditiows
specified above. pye
ww ionatur'
of Owner -Builder Date Form
of Identification lust
be Photo ID) A
violation of this exemption is a misdemeanor of the first degree punishable by a term of imprisonment not
exceeding I year and a $1,000.00 fine in addition to any civil penalties® In addition, the local permitting
jurisdiction shall withhold final approval, revoke the permit, or pursue any action or renredy for
unlicensed activity against the owner and any person performing work that requires ficensure tinder the
permit issued.
PARPn
AYRikr9&"dC.Ri
Parcel Information Value Summary
Parcel ' 01-20-30-504-16000280 2018 Working 12017 Certified Values
Values Owners) , ®
N fRERAS, CLAUDiA Valuation Method Cost/Market Cost/Market Property
Address 717 SANTA BARBARA DR SANFORD, FL 32771 I Number of Buildings 1 1 Mailing
717 SANTA BARBARA DR SANFORD, FL 32771 Depreciated Bldg Value 48,746 26,755 Subdivision
Name M, . m__m Depreciated EXFT Value 00 200 Tax
District S1-SANFORD Land Value (Market) 20,000 12,000 DOR
Use Code, 01-SINGLE FAMILY Land Value Ag Exemptions
88,946 38,955 Portability
Adj Save
Our Homes Adj 0 0 ; 14
Amendment 1 Adj 0 0 i
P&
G Adj 0 0 Assessed
Value 68,946 38,955 CoM1
w t Tax Amount without SOH. 741,00 r, r,
co Save
Our Homes Savings: 0,00 Does NOT
INCLUDE Non Ad Valorem Assessments Legal Description
ALL LOT
28 & PT LOT 29 DESC AS BEG NW
COB LOT 29 RUN S 58 DEG 22 MIN 23
SEC E 63 FT N 31 DEG 37MIN 37 SEC
E 3.60 FT N 58 DEG 22 MIN 23 SEC W
62.80 FT SWLY 3,60 FT TO BEG BLK 18
DREAMWOLD PB3PG90
Taxes
Taxing
Authority
Assessment Value Exempt Values Taxable Value County General
Fund 68,946 0 68,946 Schools 68,
948 0 68,946 City Sanford
68,946 0 68,946 SJ (Saint
Johns Water Management) 68,946 0 68,946 County Bonds
68,946 0 68,946 Sales Description
Date
Book Page s Amount Qualified Vac/Imp i WARRANTY
DEED 511/2017 a 77,500 Yes .. , Improved SPECIAL WARRANTY
DEED 5121t2009 1 i 01'_ 36,800 No Improved CERTIFICATE OF
TITLE 12/112008 i 09 100 No Improved CERTIFICATE OF
TITLE 10/1/2008 i -` mz"1 100 No Improved WARRANTY DEED
611t2006 115,000 Yes Improved WARRANTY DEED
411/2006 1 1494 85,OW Yes Improved WARRANTY DEED
9/1/2003 73,000 Yes Improved WARRANTY DEED
2.0/19871, s2' r, :0 36,500 Yes Improved Land
Method Frontage Depth units units Price Land Value
Buitdirm Information
City of Sanford
Planning and Development Services
Flood Zone Determination Request Form
Name —Anibal Flores Frim Anibal Flores P. E.
Address 3730 Brookmyra Dr
City: Orlando State Ft Zip Code- 32837
Phone.- 321-286-6103 Fax: Email: anibalfloresf@aol.com
Property Address: 717 Santa Barbara
Property Owner: Claudia Contreras
Parcel Identification Number: 01-20-30-504-1800-0280
Phone: 321-696-1178 Fax: Email-
ITITITANNIff IBM=
New Structure Existing Structure (Pre-2007 FIRM Adoption)
EX] Expansion/Addition Existing Structure (Post 2007 FIRM Adoption)
Pre 2007 FIRM adoption = finished floor elevation 12" above BEE
Post 2007 FIRM adoption = finished floor elevation 24" above BEE (Ordinance 4076)
Flood Zone X Base Flood Elevation N/A Datum N/A
The referenced Flood Insurance Rate Map indicates the following:
The Parcel is in the Floodplain
A portion of the Parcel is in the Floodplain
I X I The Parcel is not in the =X Floodplain
L ------- J .
The Structure is in the Floodplain
The Structure is not in the Floodplain
Floodway
Floodway
Floodway
Floodway
Floodway
If the subject property is determined to be flood zone 'A', the best available information used to determine
the base flood elevation is:
MWIF-119MV
Reviewed by: 1ffWae,1Cae4, - Michael Cash, CFM Date: 10/11/2018
T:\Engr-Fi1es\E1evaUon Cerfificate\S\Santa Barbara Dr\717-FZD
Ms. Claudia Contreras
a game room with summer kitchen and bathroom at 717 Santa Barbara. In reviewing your plans we
4-5 weeks from time of submittal. Staff reviews the request and makes a recommendation to the
administrative official. Please note that approval is not guaranteed and fees are not refundable. in
addition, accessory residential structures 200 square feet or greater must match the architectural style
ind c struction of the ,#rimarm structure. Als accessoro residential structures cannot be used as a rental
unit and only one property address and water meter will be allowed if approved.
Attached is the application, affidavit of ownership form and requirements for your review. To proceed
with the request to establish an accessory residential structure you will need to submit the following:
0 Completed application and original signed/notarized affidavit of ownership
Letter of justification
0 Site plan and/or floor plan showing the proposed residential unit, access, parking
0 $500 fee
MEM
R QUMED iNSPECTION SEQUENCE,
Sithack
s • •se
Beam e
Roof -
Roof
Rough
s
FinalRes a
Pre-
em eBiiild
FinalBufidijg (Other) s. _'
Slab Steel Bond Electrfe
RoRgh s
WE
s
Grant Maloy, Clerk Of The Circuit Court & Goan troller Seminole County, FL
In 20150t 9564 Book:g15 4 Page: 1515; (1 P GE ) R : i71201 :22.48 Phil
REC FEE $10.00
t5 tki itt9M RE
Na
Addr
rtNOTICE OF COMMENCEMENT wsa..xw'"w
State of Florida,
County of Seminole
PertWit Numis r—LEi'smal lL.N' uircbr li1111
I -
m .W. 111R . ;I o
GENERAL DESCRIPTION
OF reesimEkTitteHolder(ifolherthanowner),
Nam 8d .. In
addition
IoLhimself. Owner Designates 'Of To receive
a copy of the Uenoes Notice as Provided in Section • Florida
Expirationof Noticeof
CommencementR date Is I year fromdate of recording unless 5: different date
Is specified) MffiMjD QMff&
ANY PAYMENTS MADE BY THE OWNER AFTER THE EXPIRATION OF THE NOTICE OF COMMENCEMENT ARE
CONSIDERED IMPROPER FLORIDA STATUTEIS,
AND CAN RESULT IN YOUR PAYING'TwICE FOR IMPROVEMENTS To YOUR PROPERTY. A NOTICE OF
COMMENGEMENT MUST BE RECORDED AND POSTED ON THE JOB BEFORE BEFORE COMMENCING
WORK OR RECORDING YOUR NOTICE OF COMMENCEMENT. INSPECTION. W
you INTEND To OBTAIN FINANCING,. CONSULT WITH YOUR LENDER OR AN ATTORNEY Stet. OfBar
tcountyof_ foregoingInstrument was
acknowledged before R . I porsonalla me
El - Name of
Person s who
has produced identification type R Identification prod .. AWETTE BLAND
tx Notary
GG
0606213My
3` z
Comm.R
CITY OF
Development Review TeamANFORD
PLANNING& DEVELOPMENT -Staff RecommendationsMinorConditionalUse
SERVICES DEPARTMENT
The Development Review Team (DRT) held a Public Meeting at 9 AM on September 25, 2018 to consider a Minor
Conditional Use to establish an accessory residential structure at 717 Santa Barbara Drive.
The project was presented at the September 18, 2018 meeting, As- part of the Minor Conditional Use process, the
standards for consideration were reviewed.
A. The conditional use must be consistent with the goals, objectives and policies of the Comprehensive Plan and the
Land Development Regulations.
The proposed use is consistent with the Land Development Regulations based on the use being an allowable use
in the City of Sanford and the use being permitted in this zoning classification after a minor conditional use. The
comprehensive plan states that supportive community facilities and accessory land uses may be located within
areas designated LDR-SF.
B.Public facilities and services including, but not limited to, roadways, park facilities, schools, police and fire
protection, drainage systems, refuse and disposal systems, water and sewer must be adequate to serve the
proposed use.
The site currently has City water service. The project is within an established area with other concurrent services
available.
C.The proposed development must not adversely affect known archeological, historical or cultural resources,
There are no known archeological, historical or cultural resources affected by this use.
D. The design of the proposed development must minimize adverse effects, including, but not limited to, visual,
noise and traffic impacts, of the proposed use on the surrounding properties.
Other properties in the area ore permitted to request a minor conditional use to establish an accessory
residential structure.
E.The conditional use must be compatible with the nature and intensity of the development surrounding the
premises and with the community character of the immediate vicinity of the parcel proposed for development.
The project is within an existing residential neighborhood and the use is limited to residential uses. The nature
and intensity of the additional use should remain consistent with its surroundings.
F.The location and topography of the premises proposed for development must make the use an appropriate use
which will not adversely affect the public interest.
Based on existing neighborhood conditions the request does appear to be in harmony with the general purpose
and intent of the land development regulations and not injurious to the neighborhood, or otherwise detrimental
to the public welfare.
1) No separate address or (2) separate meters; (3) cannot be a rental; (4) applicant shall contact the County Health
Department regarding requirements for the septic and drain field system.
A Second was made by Scott Richardson.
Motion carried 5 to 0.
WRIUMNIM 1111MM
11110113U 1!1 111!1111111111! I'l 1111111,1111 1! !1111 11111
Legal Description of the Property:
0 3 0 5 0 4 1 8 0 0 2 8 0
Address of Property: 717 Santa Barbara Sanford FL 32771 Zoning District: SR-1
Name and Address of Owner as shown in the Public Records of Seminole County, Florida:
Claudia Contreras 717 Santa Barbara Sanford, FL 32771
Application Submitted By:
Address 717 Santa Barbara
Claudia Contreras
Sanford FL 32771
Fax: E-Mail: samiekontreras@gmaii.com
Standards for Consideration for Conditional Use. in considering and acting upon an application for Conditional Use the
Planning and Zoning • or the Administrative Official shall observe the following standards and make findings
as to whether the application meets the standards, except that, pursuant • Article V111, one and two family dwellings
shall be exemptfrom concurrency review:
A. The conditional use must be consistent with the goals, objectives and policies of the Comprehensive Plan and the land
development regulations.
B. Public facilities and services including, but not limited to, roadways, park facilities, schools, police and fire protection,
drainage systems, refuse and disposal systems, water and sewer must be adequate to serve the proposed use.
C. The proposed development must not adversely affect known archeological, historical or cultural resources.
D. The design of the proposed development must minimize adverse effects, including, but not limited to, visual, noise and
traffic impacts, of the proposed use on the surrounding properties.
E. The conditional use must be compatible with the nature and intensity of the development surrounding the premises and
with the community character of the immediate vicinity of the parcel proposed for development.
F. The location and topography of the premises proposed for development must make the use an appropriate use which will
not adversely affect the public interest.
Yes i X No
1) No separate address or (2) separate meters; (3) cannot be a rental; (4) applicant shall contact the County Health
Department regarding requirements for the septic and drain field system.
T:\Development Review\11-DRT Agenda-CoverMemos\DRT Recs\DRT-CU-717 Santa Barbara -Game Room Addition.doc
BP401IO1
I
Parcel Number . . . . . . . :
Property address . . . . . :
Application, str, pmt nbr
Application type . . . . . :
Permit type . . . . . . . . :
Permit status, date . . . . :
Issue date by . . . . . . . :
Expiration date . . . . . . :
Reissue date by . . . . . . :
Permit value . . . . . . . :
Permit square footage . . . :
Property owner . . . . . . :
Contractor . . . . . . . . :
Additional permit des c . . :
CITY OF SANFORD
Permit Inquiry
01.20.30.504-1800-0280
717 SANTA BARBARA DR
18 00003834 000 000 LNDV 00
CONDITIONAL USE - MINOR
LAND DEVELOPMENT REGULATION
PLAN CHECK 9/10/18
0
0
CONTRERAS, CLAUDIA
9/25/18
07: 3 7 : 00
Phone interface number . . : 1076116
Permit pin number . . . . . 1076116
Last maintained by . . . . m GOLLOWAYJ 9/10/18 15:39:11
F3=Exit F5=Land inq F6=Sub-contractors F8=Peemit fees F9=Reqld insp
F12=Cancel
a
AT ,
s
r,
fi _ fir^ f -
i .-..._
tom....
a A,L
4
a
44
M
i
Al...aT. "1
Ax g
L
T
W
oio
Tat ,g •- c..{,,: r i 4 E^ w • - ..
Now
q> "
POP
r
7
op
0
y
Revision 0
Response to Comments 0
4
Permit —A Submittal [)ate
Project Address:
CContact: oC—y
C 9Ph: 13 C Fax:
Ernail:
Trades encompassed in revision:
El Building
Plumbing
Electrical
El Mechanical
0 Waste Water
General description of revision:
ROUTING INFORMATION
Department Approvals
El Utilities
El Waste Water
El Planning
El Engineering
1:1 1, ire Prevention
El Buildin 9 ---
City of Sanford
m. Cecil sinu
6" min. embed.
RM
11 C
Electric Plan
Scale 1 /4, = r-Cr
HEADER SCHEDULE
1 2.2x's cont glued and nailed wi 16d 12' o.c.usffig 1122" plywood ffit&.
3-2x's cont, glued and nailed w!20d IS' o.c. both aides usii* 1/2'plywood flitch between 1es
OPENI\ BEARING WALL NLNMER NONTSEA WAU1WIDTHORSTEAKINALLOFJACKS2x6s
1 2 01
01 to Yff, Zx4s 31
11 to 51 Gy xbs 1 2x4s Zr--
2xl
2s 2x8s TVtogTTypical
Load Bearing Wall Opening Detail Wall
mounted split
unit condenser I _
AC fan Y_ 1—
Wall mounted AC
unit, see product
submittal th,
N
Existing
pawl Subpanel Electrical
Riser Diagram Lights &
outlets # 14 copper
wire w! 15 amps breaker Washer,
refrigerator # 12 copper wire
w! 20 amps breaker Water
heater, dryer 4 10 copper wire
Nv/ 30 amps breaker Oven #
8 copper wire w/40 amps breaker A.
C , ;i(i copper wire xv/ 60 amps breaker IM%
Electrical
Legend 10, ' FBI1414600Smoke
Detector interconnected,
with backup battery) 220
volt outlet Duplex
convinience outlet Arc
fault outlet I =
7 Electric junction box above ceiling for future fixture TEL
Telephone l2 'e, WWI
switch Three
way switch Duplex
outlet w/ ground fault interrupter CGFI
Outletw/ground fault interrupter k7p 4
GFI weather proof outlet w/ ground fault interrupter D- Ceiling
mounted light fixture Wall mounted
light fixture Spot light
fixture Ceiling fan
5 t withlightLTelevision
cable
z db 1
1 Carbon Monoxide Al 14 5"
exhaust
duct %
BUILDING DIVISION
PERMIT CONDITIONS
Application #: 18-3259
Address: 717 Santa Barbara
Description of Work: Accessory Structure
These comments are provided for the permit listed above only.
lux#
All conditions must be met and strictly adhered to.
1. The accessory structure is not permitted to be used for sleeping purposes/bed room. The
engineer of record has legally certified the structure as a "gameroom."
2. All work must be exposed for each required inspection. If the work has been completed,
a signed & sealed affidavit from the engineer of record will be required for each applicable
inspection detailing what portion was personally inspected and approved by the engineer.
ReLqa recl lr s °ctior s
Slab
Sheathing - Roof
Sheathing - Walls
Roof Dry In
Frame
4# Insulation Rough
Final Siding
Final Roof
Final Building
Plumbing Underground
Plumbing Tubset
Plumbing Final
lll lllllllllli 11q;l i
hib-
3'-0" 28'-3 "
Floor Plan
Scale 1/4" = 1'-0"
Footer Types
PT stuctural
wood siding
F-1
4x4
post li
st F-4
F-2
245 rebars
3" butt. clearance
WINDOW AND DOOR ATTACHMENT NOTES
Window and door assemblies to conform FBC 2017 (6th Edition) Chapter 3 Section R301,2(2)
2x PT bucks/nailers shall extend beyond interior face of window, fasten buck to masonry wV 1"XY4
Tapeons 6" from edges and 16" o,c, max,
Bucks less than 2x to be fastened with cut nails or equivalent, structural connections ofwindow to
structure by others in this case.
Bldg, with Exposure B and Ult. Wind Speed 140 mph
Sf Pos. Pr, Neg. Pr, Sf Pos, Pr, Neg, Pr.
A 10 35,30 38.20 F 10 35.30 47,20
B 20 33,70 36,70 G 20 j 33.70 4-4,00
1 Zone 4 C 50 31.60 34.60 Zone 5 H 50 31.60 39.80
D 100 1 30,00 33.00 1 100 30,00 36.70
E 500 2630 2630 K 500 1 2630 2930
Window Schedule Door Schedule
Window Frame
Sim Remarks
Door
Type Size Remarks
Type Type
x i367/8 "W23SH WioodID1 3'0" x 68" Exterior 1 38"
32N 13"
Wood D2 2'8" x 68" Interior i Interior
bilold D3 4'0" x 68" door A
e c u rv t.0 ,c, olcDer oryr
OP-
Leo 71
ttcvh J=b strips v't >. ti; e edge ever,
iv L
S+Cl w'"dov; `r rour.y, 'per,1^y ,',It, S - -- iCy CU7id; G` ;u'-Y „r ru r 5'11S1r.,
d ;aari--iu i C,"ges over vrev.CuSjy "stal ed 4', crycXCeS_, "_,u4'+ir, t"yCpaY hot E stpr ti
tics._ .Aftoch . ecc f!CSi',ng cove ".,,^- GGu": . +nn S#;... u` i rP ;; r, e.-". t-,, S _,_/.s
ooe7ino `shown cs `JCSk DC not C-
cncllecd f,Clrlges, ,1n eacr -, ,,mow,
WINDOW FLASHING DETAIL
11
Simpson C:26-2
u,/ 4-16d at beam
d at header, typ
1 4
J '.---4x4 PT —4X4 post Ilo
Simpson LCE4Z — post /
of 14-16d at be t---Simpson EZ
10-16d at pose at interior corner
f
wI 4-1 /4" Titen
screws at base
r`and 4-1i4"xI !/j"
Simpson SDS
x6— at post
typ Connectors at Post Base
Seale 114°' = I'o"'
Framing at lest
Scale 1,14" = 1'- "
r
Q
FA
I
I
New slab----\ --Existing
Fiberglass shingles over 15;; footer/slab Simpson RR
32 Indicates 9" !/2feltandL5CDXplywood, or dowel -
w/ 4- 10dx 1
0S13 nailed w/ 8d common at ridge board
6 into existing slab 4.5" nails 4" ox. short side, 6" ox.
epoxy` min. embed. in epand
4- 1 Odx I long
side and 12" ox. in field. at rafter Roof
rafter, see roof layout Detail Connecting New to I
x6 PT fascia See elevations Existing Slalb/Footer if Required Scale
114' 1'4' Aluminum
soffit, — R-30 insulation H16
w Simpson ,/ fascia
and drip edge
2-
10dxl at truss Kp, board and
10-10dxl 2 at
ptstructuralN1 Od nails, typ sheathingplate
gyp.
board over studs and 3
H
2 R-
13 min, insulation 3'
1 0 1 8anchorbolt, 10" long 'i at
32" o.c. max and one —Simpson
SPI sv each
side of comers and 6-10d at stud and 4-
10d at plate coalopeningsPT
bottom plate 0'0' FY i 2,
500 psi concrete with fibermesh rebars
or 6s6 L' WWF over 6 mil, vapor T—
10 See
footers barrier on clean compacted and for
details treated fill - 4
a =4! ROOF
DECK NAIL SPACING ZONE
EDGE FIELD 1
6' K 2
4' 6' 3
4" 4' NAILS
Zone
1, 2 and 3 8d klecharlically
Driven NailsAccepted
As FoHm,& Min.
Shank Dia, 0,113' Wall
Sheathing Nail Spacing Zone
Edge Field 1
4" 4" 2
6" 8" Nails
Zone I and 2 8d R4
Roof
Framing Layout Scale' .
14" - 1'4," 2x8
ridge board 2x6
rafter typ
W
Detail
Framing at Ridge Board Scale
N7S OEM
1-
Rafter spacing max 2' o.c. 2-
All lumber SYP grade 2. 3 -
All lurnber exposed to the elements to
be pressure treated. 4-
All lumber in contact with concrete or masonry
to be pressure treated, 5-
Provide 2x4 blocking at all rafters
at mid span, I
EW,
cacil Must
6" min. embed.
HEADER SCHEDULE
3-2x's cont, glued and nailed w/ 20d 15' ox both sides using 1/2" plywoodflitch between 2x's OPENING
i BEARENIG WALL NIUMBER N' WIDTH
OR SHF—AR IVALL OF !A—CKSNOBEARNIG WALL 2x6s I
2As 9 01to31GI3111
to YC 12X813 1 2x4s 5' 1'
to 7, 01 j 2x 1 Us 22,x6s 72xe,
2xlZs 2TypicalLoad
Beating Wall Opening Detail N Existing
panel
SLbpariel Electrical Riser
Diagram Lights & outlets #'
14 copper Wire
w/ 15 amps breaker Washer, refrigerator #
12 copper wire w/
20 amps breaker Water heater,
dryer# 10 copper wire w/
30 amps breaker WSW MIN
ElectricalLegend
SU Smoke
Detector interconnected, with
backup battery) 220 volt
outlet Duplex convinience
outlet AF Arc
fault outlet Electric junction
box above ceiling for future fixture TEL Telephone
Wall switch
Thre.way'
switch Q Duplex outlet
w/ground fault interrupter 9 GFI
Outlet iv/ ground fault interrupter GFI weather
proof outlet w/ ground fault internipter Ceiling mounted
light fixture Wall mounted
light fixture Spot light
fixture 04 19 Ceiling
fan
with light
Television cable
02 Carbon
Monoxide Alarm
LEGAL DESCRIPTION
OA: v ad'^s"frt4c.4- 7001"<'rwo
RN 51UL41"t s lohm,
tow"46 11"hmt 9/05,1/t,;. o Is
L--A—
HEM
CLAMA CONIRMAS MGEN
FtRST SIGNATURE TITLE, INC. 7 7 SANTA BARBARA DRIVE
fM n 0C'MWtW Irl MATIMMAt TMyp<;ANFnRr), FtomnA 32771
ma
ON OFOUND.
FOUND
DISK
PSM PROFESSIONAL SURVEYOR
MAPPER
Pp POWER POLE
A/C
UAL
AIR CONDITIONER
U,E, UTILITY EASEMENT
M) FIELD MEASURED
JR WATER METER
POLE
Cl C2
a
REPORTSDATEOFFIELDSURVEY' 05/19/17
AERNIMS OR DELETIONS To SURVEY MAPS OR
SURVEYOR STASUSHED USING FENCE OR SUILDINi
I S
FAmxm%mmknpw:;%w or
Category / Sub gor an ' Product Florida Approval #
n rqn include rraa l
1. Exterior Doors
r_
1,w.__
lids
cilUpnt__._. m
Uto +' tic
w_
Sinr
mnt
oUbl tq _
I
Awrntrt
ss Throu
Mullions
tnd
Dual Action
hires 2014
Category ubcate Manufacturer Product Florida Approval
lr}lt//tn(,dCtrniltJC?t13. Panel Walls
Set fits _. ..
Storefronts
Curtain lls
1.
all e er
glass k
em ran
Cre. : neuse
E. S Composite
nets
flier
p
t7Q t1 1oducts
ytlriles e
aL t.,_.' .......:.........._ 4.
R
Underla yments
aef"n Fasteners
i/^`.
p..s..».x..,,.,+..r.....,..._.._„__............._._...._ fsNon
Metal Roof g
Wood Shakes and
Shin les
eofln tiles
Roofing
Insulation
Built up roofing
ytem
edified Bitume
Single Poly beef
stems
ecfin date
Cements/
Adhesives
Coatin
surd pfi
Rcaefin Syoofstems_.
ale
adh save
p y Applied
P yurethane
ooin
P.S.
Panels
Vents........
w
di11idVf
Cat or, l Subcater ury Manufacturer Product Florida Approval
L?escri torn pclude darrtl
Accordion
aIPColonial
Ro11
meat
ether
Other
T» tructurat J.
ts
Connectors / Wood
Anchors 1
Truss Plates
n in r Lumber
ailin
Coolers/Freezer's
ref6- C_oncrete Ad i ores
Precast Lintels
lnsulatron 1=orm
Deck / Roof
Wall
Prefab Sheds
Other
New Exterior
Env4DIopprod4cts---,—,.-.-------,— Applicant'
s Signature Applicant'
s Name Please
Print)
yV yS AND SONS
20-3 Humble Ave.
San Antonio, TX 78225
1This product anchoring draiving has been evaluated and is in compliance with the Edition (
2017) Florida Building Code qF8C) excluding the "High Velocity Hurricane Zone" (
WHZ). See the Certification Agency Certificate for sizes, specifications Z
Product anchors shall be as listed and spaced as shown on details. Anchor embedment
to base material shall be beyond wall dressing or stucco. 3,
When used In areas requiring wind home deeds protection, this product oamplies with FBC
Sections 1609.12 & R301,212 and does not requitean impact resistant covering,
This product meets missile level 'D' and Includes Wind Zone 4 as defined in 4For
2x stud framing construction, anchoring of these units shall be the some as that shown for
2x buck masonry conshiction. y 37ATMAKO* .
FRAME.WDTH
w «» z
e af# 13
36,TV .
PANELMDTH ;
OXE L y.
1(\\ j ] (}
55 : IMK
z-4 f--
l|!`
lULNA«
0
EM
mom
mmm
1
m
EXTERIOR \ -`d MRIOR
i 11E AI ROU S Q
INIMMUNIMMM
g
EXTERIOR3 Ia, I fWTERIOR
VEMCAI
f `
INTERIOR ``I EXTERIOR
m
0
TYR)
c
FRAMEDOOR
h By, J
t
m
BE
M
I
I
n
l
va 2,02'
i
s
4,W
d
cat, ctt R TF:
Concrete - anchor tocations at the comm may be adjusted to rrxdhfizk.
the mim edge disfarce to martor jotnU.
2, Concrete anchor locotlons noted ss ER" must be adjusted
to ma ntotn the min, edge dWonce to mortar joints, addhimal concrete
anchorsmaybe required to ensure the 'MAX ` CENTER' dmssnattn
not exceeded
I Gard;.tato anchor table,,
tAPCO n Ile 1=11d" r r 7 17 1
d .7, .
ULTRACON tld" 1.114' 1"
this 311C 1-1/r r 1.112SA6O-N LFs
AttA
t, Mdracha 518' t'ond , & 1'0,c, 4=kv FL— 17901.1
ofto pmvenf thewftM: ofwOod ow
7 7
VENT Di
HARBOR MASTER"
otmpAcr
1, This product has been evoluoted and a in compliance with the Sth Edition
2014) Rodda Building Code (FBC) structural requirements excluding the'High
Velocity Hurricane Zo ' ( HZ),
Product anchors sts h be as lasted and spaced as shown on details. Anchor
embedment to base motendshol be beyond we$ dressing or stucco.
3 Mien used in areas requkingAdna' borne debris protection this product
compkesvAth Section 1609,1.2 of the FBC and does not require on impact
resistant covering, i product meets rneele Level V ant includes Who Zane
as defirred in ASTM E 1996 arad Section 1609,1,2.2 of the F C ,
4. For 2x stud frorning e = tiara, anchoringonchoringof these units ftH be the some o that
shown for 2x buck rrrmorbrya traction, Site
condifflom that deviate From the details of this drawing require engineering
o y a licensed engineer or registered oreh t t. 8
ME
Ni n,
1, LOCATE OPERATING
SASH LOCK 8'
FROM EACH END,
0—T—%
1. For2(stud co ftn." lergth ofthe onchon
sixg be haeosed an amount equd to Bess
of any OmthLnQtx t
nstertbn or the arsct ' htc # stud shd w no
n that k
Two (2) saawsreqd persffap, ! owh Face of buck
i .. embedmentt),
MM
IM
F--2 HORIZONTALTAB CROSS EC-PON
3
VERTICAL CROSS SECTION
MM
ttt to
o
C #
0
NOTM
1. Fc construction, fi hof
gxW be bvessed on affoint eqLd to
ofony hffug
perstrathn of intofte Stud ea be no test
Mon . tshown in the mmoM 2x buck Insta4ation'
he*n,
2, T (2) wrews mqdper strop, i face atbuck
1.31" '. tr . )
S.M.S. (2) REO'D INTO
FRWE AT EACH STRAP
MIRM
t VERTCAL,, CPSS SECTION
Shown wj£X sub —buck 6
I QIoritef8anc rewsmrepracnscrewsthisview
representative of head & iambs for use
on 2X buck only 4qy I
tv per.. H e otj23
C8 LFS..... FL—
IC23
re e
4
0 7
IIN7AWLLATIONNTALTION
T EADH IN
1=
ME
I
ff
0
QONCRUE ANCHOR NOTES- ej
L Concreteanchor locations atthe comen may be adjustedto maintain the min. X
edge dblonce to mortarMnts.
MAX, B2. Concrete anchorlacerate noted as ON CENTEit"must be adjusted to 0
moinfoin the min' edge distance to mortarjoints, sx1citilond concrete a AN ,nchors
moy be requited to ensure the 'MAX, ON CENTER" dirnension are notexceedea, 2
1 Concrete anchor table:
ANCHOR ANCHOR MIN. MIN, CLEARANCE MIN. CLEARANCE
TYPE SIZE EMBEDMENT TO MASONRY TO ADJACENT
ANCHOR
FTW 0 1/4" 1-114" 21 4" DAM 01 23 08
LTAPCON- Mva,
ELCO
N,T,S, Is
j4 ON/'r 1 -1/4 1" 4' By EW
WOOD SCREW INSTALLATION NOTES: OW, sr, LFS rz
1, Maintain aminimurn 5/8edge distance, 1'end distance, & l'o.c. spacing of 0
wood screws to prevent the spifffing ofwood, FL-10239.7
5 o 7 as
0,544`°
I
G.t05"
s
0.50 '
EAO JAM
FRAME COVER
sa r`
1 3.394° ci
G, 1 "(( tf— 4
f
08 SPRING COVER AA LlAtER GC VER
6 £X7E',t R JAMB LIN17P
COVER
SIDE INTERIOR
6 S'GP
G41"
O063' 29
RGAt4 St'd. aA 0
6 5„ fijftrxs
4
64" t
g+
JAA4P
L1tdE S SCDE JAMJAM6 606SILL COVER °HOLLOW' N 50 2.57..
596"-- 0
N a
20727 #
EAU
2 NEAR PARTING 310P INTERIOR STOP
1AW F-
i i.4S1` ` 2.115" ca a 1,62 "- 7 e3 LQYdERTrLE
e PSBR RAIL 105 tPkR ChECY, RAfL 17° !J4VER StliEa Ei mm
497"
i
77teG
ST P C 114G STOP S fJ R GILL TER tO G
ERING
STOP
PT,)
0 01
72"
RAd.
4E PcElG
amim
e NTS
2 EW «
L d{
F 10239,1 /
27
r I
1 Force Etqrine-J"'1,ng & "I"esting Inc.
1953f) Ramblewam) Dfive
f1ixmb1c,TX 77338
Product Evaluation Report
PAC- 8,50 0.032`*AL~UM SOMT PANEL AS"BLY x 12'** Wde
OVER PURLINSAV
Florida Product Approval # 4483.1 R2
Florida BuiKng Code 2007
Per Rule 98-72
Method: 1 -D
Category: Panel Wall
Subcategory: Soffits
Product Manufftacctu
102 Northpoint Parkway
Acworth, GA. 30102
Eneineer Evaluator.
Terrencer P.F- # 44
805 r Trail
Alpharetta, GA 30009
99DIAnix
Evaluation Report Pages 1 - 4
j*t11f1jr$'
h,
c
No. 44913(
STATE OF
41
0 ILIeY -
Compliance Statement: The product as described in this report has demonstrated compliance with the
Florida Building Code 2007, Section 1403.3; 2001
1roduct Description: PAC 850, 0.032' Aluminum, 12" Wide, Soffit Panel restrained by #10 fastener
into Steel or Wood Purlins. Structural application,
Panel Material/Standards: Material: Aluminum
Yield Strength: 21.4 ksi
Corrosion Resistance: Panel Material shall comply with FBC, Section 2002.2
Panel Dimension(s): Thickness: .032"
Width: 12"
Rib Height: .38"
Roof Insulation Board: Not Applicable
Support: Purlins, (Design of support system is not included in this evaluations)
Steel Purlins, 22 ga.
Yield Strength: 50 ks! minimum
Is Support Spacing: 48" o.c. maximum
IRWIN_ RVWVMKT=
Installation: Petersen "PAC -850 Soffit" Panel System (See uploaded details)
Attachment to Steel Purlins: Purl
n Spacing: 48" o.c. Max. I fasteners per support Rib
Interlock: "Hook and Grab" Interlock Must
be installed in compliance with 1405.3 Install
the panel system according to the manufacturer's installation instruction. E.
C
146
449i3r' STATE
OF Z
0
ILI 1%, 4,fWM
FL#
4483.1 Wo— C 11^11 A
7-
Force I ng';inecring &'I'esting Inc.
195,Y) Rannblewood Ddve
flutn'ble"'I'X 77338
Table 'A" Steel Purli
Maximum Total
Purlin Spacing:
Fasteners per Purlin:
Span Con dition:
VVf t-dLLV I, aVe Ulan EdUI
additional values.
Quaft Assurance Entity: The manufacturer has established compliance of soffit panel products in
accordance with the Florida Building Code and Rule 9B-72.070 (3) for
manufacturing under a quality assurance program audited by an approved
quality assurance entity through: Underwriters Laboratories, Inc, (FBC
Organization # QUA 10: 1743)
Performance Standards: The product has been tested in accordance with:
ASTM E 330 (2002) — Standard Test Method for Structural Performance
of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform
Static Air Pressure Difference
code compliance: The product described herein has demonstrated compliance with
the Florida Building Code, Section 1504.3.2
Evaluation Report Scope: The product evaluation is limited to compliance with the structural wind lo
requirements of the Florida Building Code, as relates to Rule 9B-72. i
LIP 11 ins A,
Reference Date: 1. ASTIVI E 330 -02 Negative Load Test
Cerny & Ivey Engineers, Inc. (FBC Organization ID# TST3850)
Report No. T24337, Dated 11/24/2004
1 Certificate of Independence
By Terrence E. Wolfe, P.E. (No. 44923) @ Force Engineering & Testing, Inc.
FBC Organization # ANE ID: 1920)
E. V-
C E 14
No. 44913"
STATE OF
0 Rl
1 Force Engpincering & Testing Inc.
195,% Ramblewomi Drive
Iftsinble,IX 77338
III Jill I
Design Procedure- Based on the dimensions of the structure, appropriate wind loads are
determined using Chapter 16 of the FBC 2007 for roof cladding wind loads. These
component wind loads for roof cladding are compared to the allowable pressures
listed above. The design professional shall select the appropriate erection details
to reference in his drawings for proper fastener attachment to his structure and
analyze the panel fasteners for pullout and pullover. Support framing must be in
compliance with FBC Chapter 22 for steel, Chapter 23 for wood and Chapter 16
for structural loading.
l 'IlIk q E E
No. 40
q
STATE OF
OP
flit
I'ICLY J ,
EXTERIOR RESEARCH & DESIGN, LLC.
Certificate of Authorization #9503
353 CHRISTIAN STREET, UNIT #13
TRINI-ly ERD OXFORD, CT 06478
PHONE: (203) 262-9245
FAX: (203) 262-9243
EVALUATION REPORT
Owens Coming Evaluation Report 037940.02.12-R2
One Owens Coming Parkway FL10674-RS
Toledo, OH 43659 Date of Issuance: 02/06/2012
Revision 2: 12/19/2012
SCOPE:
This Evaluation Report is issued under Rule 9N-3 and the applicable rules and regulabons governing
the use of construction materials in the State of Florida. The documentation submitted has been
reviewed by Robert Nierninen, P.E. for use of the product under the Florida Building Code and
Florida Building Code, Residential Volume. The products described herein have been designed t*
comply with the 2010 FBC and 2010 FBC Residential Volume sections noted herein.
Prepared by:
Robert 3.M. Nieminen, P.E.
Florida Registration No. 59166, Florida Dr-4 ANE1 983
The facsimile seat appearing was authorized
by Robot Nierninen, F.E. on 12/19/2012
This doe-, not serve as an electronicaily signed
document. Signed, seated hardcopes, have been
transmitted to the Product Approval Administrator and
to the named dient
CERTIFICAMN OF 11MOMENDENCE.-
I , TrinitylERD does not have, nor does it intend to acquire or will it acquire, a financial interest in any company manufacturing or
distributing products it evaluates.
2. TrinitylERD is not owned, operated or controlled by any company manufacturing or distributing products it evaluates,
3. Robert Nierninen, P,E. does not have nor will acquire, a financial interest in any company manufacturing or distributing products for which
the evaluation reports are being issued.
4, Robert Nieminen, P,E, does not have, nor will acquire, a financial interest in any other entity involved in the approval process of the
product,
TRINITY ERD
Product Category: Roofing
Sub -Category. Asphalt Shingles
Compliance Statement.- Owens Coming Asphalt Roof Shingles, as produced by Owens Coming, have
demonstrated compliance with the following sections of the Florida Building Code and Florida Building
Code, Residential Volume through testing in accordance with the following Standards. Compliance is
subject to the Installation Requirements and Limitations / Conditions of Use set forth herein.
flqnwl M
sAdim EL221M Sandilird YM
1507.2.5, R905.2.4 Physical Properties ASTM D3462 2007
1507.23.1, R905.2.6.1 Wind Resistance ASTM D3161, Class F 2006
1507.2.7.1, R905.2.6.1 Wind Resistance ASTM D7158, Class H 2007
3. REFERENCES-.
Inuu ova mindlim ad9togs 299
UL LLC (CER9626) Physicals & Wind Resistance File R2453, Vol. 3 02/15/2007
UL LLC (CER9626) Physicals & Wind Resistance 20120516-R2453 05/16/2012
UL LLC (TST19628) Physical Properties 06CA20263 04/18/2006
UL LLC (TST9628) Wind Resistance 11CA34308 02/18/2012
Miami -Dade (CER1592) FBC HVHZ Compliance 07-1116.12 02/14/2008
Miami -Dade (CER1592) FBC HVHZ Compliance 09-0915.12 12/16/2009
Miami -Dade (CER1592) FBC HVHZ Compliance 10-0817L9 10/27/2010
Miami -Dade (CER1592) FBC HVHZ Compliance 10-0817.10 10/27/2010
Miami -Dade (CER1592) FBC HVHZ Compliance 10-0817.08 10/27/2010
Miami -Dade (CER1592) FBC HVHZ Compliance 10-0817.07 10/27/2010
Miami -Dade (CER1592) FBC HVHZ Compliance 11-0411.03 06/16/2011
Miami -Dade (CER1592) FBC HVHZ Compliance 12-0309.01 07/19/2012
UL LLC (QUA9625) Quality Control Service Confirmation R2453 Exp. 09/26/2014
4. PRODucT DEscRivriow
4.1 Asphalt Shingles:
4.1A Classic,71' and Supreme*'are fiberglass reinforced, 3-tab asphalt roof shingles.
4.1.2 Berkshire* are fiberglass reinforced, 4-tab asphalt roof shingles.
4J.3 Duration*, TruDefinitionc"' Duration*, Durationc"', Premium Cool, TruDefinitionc"' Duration*
Designer for Collection, TruDeflnitiorr-o' Oakridge*, Oakridge* and WeatherGuarcic' HP are
fiberglass reinforced, laminated asphalt roof shingles.
4.2 Berkshire"R' Hip & Ridge Shingles, High Ridge, Hip & Ridge with Sealant, WeatherGuardc*' HP Hip
Ridge Shingles and ProEdge Hip & Ridge Shingles are fiberglass reinforced, hip and ridge
asphalt roof shingles.
4.3 Starter Strip Plus and Starter Shingle Roll are starter strips for asphalt roof shingles.
pmnnn i
5.1 This Evaluation Report is not for use in the HVHZ.
5.2 Fire Classification is not part of this Evaluation Report; refer to current Approved Roofing
Materials Directory for fire ratings of this product.
53 Wind Classification:
E)derior Research and Design, LLC. Evaluation Report 037940.02.12-R2
Certificate of Authorliation #9503 FL10674-RS
Revision 2: 12/19/2012
Page 2 of 6
TRINITY ERD
5.14 Refer to Owens Coming published information on wind resistance and installation limitations.
5.4 All products in the roof assembly shall have quality assurance audit in accordance with the
Florida Building Code and F.A.C, Rule
6.1 Underlayment:
6.1.1 Underlayment shall be acceptable to Owens Coming and shall hold current Florida Statewide
Product Approval, or be Locally Approved per Rule 9N-3, per FBC Sections 1507.2.3, 1507.2.4
or R905.2.3.
6.2 Asphalt Shingles:
6.2.1 Installation of asphalt shingles shall comply with the manufacturer's current published
instructions, using minimum four (4) nails per shingle in accordance with FBC Sections 1507.2
or R905.2, with the following exceptions:
Berkshir shingles require minimum five (5) nails per shingle.
Weather'Guard(" HP shingles require minimum six (6) nails per shingle.
iStarter Strip Plus requires minimum five (5) nails per strip. Refer
to Owens Corning published information on wind resistance and installation limitations. 6.
2.2 Fasteners shall be in accordance with the manufacturer's published requirements, but not less than
FBC 1507.2.6 or R905.2.5. Staples are not permitted. 6,
2,4 Where the roof slope exceeds 21 units vertical in 12 units horizontal, special methods of fastening
are required. Contact the shingle manufacturer for details. 6,
2.5 Minimum Nailing-aassic@ & Supreme: Nort"
W tftno" or Ar" pwo M"
A"** High VK*d A~ "
ra vMofts ~m*j** Ar"* 6,
lexpostwo Expaxki6n
ftennot
mam" or A~ p4w* VVI"
An" WhW A~
pwo viontos norowAm =h"
7
Expaski"
FL10674-
RS Ravftfoo
2* 12/"/2012 Page
3 of 6
TRINITY ERD
ztt
a
a
muwiiuumwirwrtr rr mu oiunir seerwrr+r
p
6.2.8 Minimum Nailing r t
1
3 4enalsk
Clow Ew4ddft*G&#p*
III II Iytl,l II 11
Revision@12/1912012
Page 4 of
TRINITY ERD
PZZCQ
am
6.3.1 Installation of Berkshireca' Hip and Ridge Shingles, High Ridge, Hip & Ridge wft Sealant,
WeatherGuard*' HP Hip and Ridge Shingles and ProEdge Hip & Ridge Shingles shall comply with
the manufacturer's current published instructions, using four (4) nails per shingle. Refer to
Owens Corning published information on wind resistance and installation limitations, including
the use of hand -seating for wind warranties.
ow
MW
mm
Fasteners shall be in accordance with the manufacturer's published requirements, but not less
than FBC 1507.2.6 or R905.2.5. Staples are not permitted.
Minimum Nailing - Berkshire@ Hip & Ridge and High Ridge:
Fig, 1
Media"
Naas-
Exposwe
SEMEM31=
Fig. 2
lopmew SWOIAGW
7 Nails
TOPLaromw I14—r
r Piece
12,
Exterior Research and Design, LLC. Evaluation Report 037940.02.12-R2
certificate of Authorization #9503 FL10674-RS
Revision 2: 12/19/2012
Page 5 of 6
Fig. A .....
WMd
IA.
011111111151'7111 T
7. LABELING:
TRINITY ERD
SUndord
Fastenifty -II --
Pattem
r
12* s"UM
7 t
7.1 Each unit shall bear a permanent IaW with the manufacturer's name, logo, city, state and logo
of the Accredited Quality Assurance Agency noted herein.
7.2 Asphalt shingle wrappers shalt indicate compliance with one of the required classifications
detailed in FBC Table 1507.2 7.1 / R905Z6. 1
As requited by the Building Official or Authority Having Jurisdiction in order to prop" evaluate t
installation of this product. I
Contact the named QA entity for information on which plants produce products covered by Florida Rule
9N-3 QA requirements,
E)derlor Research and Design, LLC. Evaluation Report 037940.02.12-R2
Cortfficare of Authorization #95a3 FL10674-RS
Revision 2: 12/19/2012
Page 6 of 6
EXTERIOR RESEARCH & DESIGN, LLC.
CardfIcate ofAuthorization #9503
353 CHRISTIAN STREET, UNIT #13
TRINITY ERD OXFORD, CT 06478
PHONE: (203) 262-9245
FAX: (203) 262-9243
EVALUATI" AEPOWr
p IWiltiill, 1111i 11
Prepared by:
Robert 3.M. Nleminen, P.E.
Florida Registration No. 59166, Florida DCA ANE1983
The facsimile sea( appeanng was authonzed
by Robert Merriman, P.E. on 02/17/2012
This does not erve as an etectrararally signed
down -vent. Signed, sealed ha pies have been
transmitted to the Produft Approval Administrator and
to the named dient
CERTIFICATICM OF 1"DEPENDENCE.
L TrinitylERD does not have, nor does it intend to acquire or will it acquire, a financial interest in any company manufacturing or
distributing products it evaluates.
2TrinitylM is not owned, operated or controlled by any company manufacturing or distributing products it evaluates, I
Robert Nueminen, P,E. does not have nor will acquire, a financial interest in any company manufacturing or distributing products for which the
evaluation reports are being issued, 4Robert
Niermnen, P.E. does not have, nor will acquire, a financial interest in any other entity involved in the approval process of the product.
TRINITY ERD
Product Category: Roofing
Sub -Category: Underlayment
Compliance Statement: RhinoRoof Underlayment, as produced by Interwrap, Inc., has demonstrated
compliance with the intent of following sections of the Florida Building Code through testing in
accordance with applicable sections of the following Standards. Compliance is subject to the Installation
Requirements and Limitations / Conditions of Use set forth herein.
5SAL01 Emmu" Randall MUE
1507.2.3 Unrolling, Breaking Strength, ASTNI D226 2006
Pliability, Loss on Heating
1507.2.3 Unrolling, Tear Strength, Pliability, ASTM D4869 2005
Loss on Heating, Liquid Water
Transmission, Breaking Strength,
Dimensional Stability
REFERENCES:
filift fnminatLaa RefffSAKS DAft
ITS (TST1509) Physical Properties 100539395COQ-006 10/27/2011
ITS (TST1509) Physical Properties 100539395COQ-002 10/27/2011
ITS (QUA1673) Quality Control Inspection Report 12/13/2011
4. PRODUCT DESCRIPTION:
4A Rhinoltoof is a multdayered polymer woven coated synthetic roof underlayment intended as
an alternate to ASTM D226, Type I (a.k.a., 15 lb saturated asphalt felt) or D4869 Type II felt.
RhinoRoof is available in 42-inch wide rolls, and can be produced in various other sizes.
5.1 This Evaluation Report is not for use in the HVHZ.
5,2 Fire Classification is not part of this Evaluation Report; refer to current Approved Roofing
Materials Directory or test report from accredited testing agency for fire ratings of this
product.
5.3 RhinoRoof Underlayment may be used with any prepared roof cover where the product is
specifically referenced within FBC approval documents. If not listed, a request may be made
to the AHJ for approval based on this evaluation combined with supporting data for the
prepared roof covering,
5.4 Allowable roof covers applied atop RhinoRoof Underlayment are follows:
Table I- Roof Cover Options
Asphalt Nall -On Tile Foam -On Slate or
Underlayment Shingles Tile metal Shakes & Simulated
Shingles State
RhinoRoof Yes No No No No No
Exterior Research and Design, LLC. Evaluation Report 140510.02.12
Certificate ofAuthorization #9503 FLIS216
Date of Issuance: 02/17/2012
Page 2 of 4
TRINITY ERD
5,5 Exposure Limitations:
5.5A RhinoRoof Underlayment shall not be left exposed for longer than 30-days after installation.
7. LABELING'.
Each unit shalt bear a permanent label with the manufacturer's name, logo, city, state and logo of the
Accredited Quality Assurance Agency noted herein.
As required by the Building Official or Audwrity Having Jurisdiction in order to properly evaluate the
Installation of this product.
Exterior Research and Design, LLC. Evaluation Report 140510.02.12
Certifkate of Authorization #9503 FL15216
Date of Issuance: 02/17/2012
Page 3 of 4
TRINITY ERD
requirements.
10 QuALiTy AssuRANce ENTrry:
Intertek Testing Services NA Inc.-ETL/Wamock Hersey - QUA1673; (604) 520-3321
Exterior Research and Design, LLC. Evaluation Report 140510.02.12
Certificate of Authorization #9503 FL15216
Date of Issuance: 02/17/2012
Page 4 of 4
CREEK,
Manufacturer: Southeastern Metals Manufacturing Co,, Inc, (BM)
11801 Industry Drive
Jacksonville, FL 32218
800) 874-0335
t"''Sernc"4als corn'
Manufacturing Plant: Jacksonville, FL
Quality Assurance: Underwriters Laboratories Inc. (QUA1743)
SCOPE
IW AME0. MMAW
Tampa,
FL 33647 813)
480-3421 t
0 . # - **Z. # Category:
Roofing Subcategory-
Roofing Accessories that are an Integral Part of the Roofing System Code
Sections: 1714,2 Properties:
Roof Ventilation REFERENCES
E-
n-t-dyRep_ortNo. §LqndAr_dPRI
Construction Materials Technologies (TST5878) SEM-038-02-01 ASTM E 330 PRODUCT
DESCPJFt*N AND APPILICATION Issued
May;Z, 2014 NM
HVHZ Off Ridge Minimum 26 ga, ASTM A792 or ASTM A653 svteel" Fy = thin. 50 ksi; rriaximurn Vent:
dimensions of the vent are 24-inch wide x 78-inch long x 4.25-inch high. Vent is available
in nominal 4-ft and 6-ft sizes. Deck
Type: Minimum 7116-inch APA span rated OSB sheathing or 15/32-inch APA span rated plywood
sheathing for new and existing roof deck (Deck shall be designed by others in accordance
with FBC requirements). Roof
slope- Minimum 4:12 Mean
Roof Height: Maximum 33-ft Roof
Cut - Out 2.5-inch wide x 42-inch opening for the nominal 4-ft vent 2.
5-inch vWde x 66-inch opening for the nominal 6-ft vent Attachment
Martin& Cut-out opening as prescribed above into the sheathing located a minimum 6-inch off the
ridge. For a single vent, install the vent as close to the center of the root length as possible.
Multiple vents should be evenly spaced along the roof length. Remove
interfering shingle nails around the perimeter of the opening and any debris 3EM14001
FL16994 Page I of 3 This
evaluation report is provided for State of Florida product approval under Rule 9N-3, The manufacturer shall notify CREEK Technical
Services, LLC of any product changes or quality assurance changes throughout the duration for which this report is valid. This
evaluation report does not express nor imply warranty, installation, recommended use, or other product attributes that are not specifically
addressed herein,
CREEK
TECHNICAL SERVICES, LLC
NON HVHZ Off Fddge Vent
WINOWN WMAW-Wal ININUUM
on top of the shingles. Attach the vent vVith #9 x min. 1,5-inch HWH screws with 0,
inch seating washers having sufficient length to penetrate through the sheathing
minimum of 3/s-inch, The screws shall be located 1-inch from the edge of the flange a
5.5-inches o.c. along all four sides of the vent, All loosened shingles shall be adher
down with roof cementtmastic,
EMEZ=
Maximum Design
Pressure' (psf) -22.5
MEMEEMOM
UMITATIONS
H
1 ) Fire Classification is outside the scope of this evaluation,
2) This report is not for use in the HVHZ.
3) The roof deck and deck attachment shall be designed by others in accordance with the 2010 FBC.
4) SEMCO vents shall be installed in strict compliance with this evaluation report and the manufacture
published installation instructions. In the event of conflict, the more restrictive installation shall be enforced
i5) Deck substrates shall be clean, dry, and free from any irregularities and debris. All fasteners in the de
shall be checked for protrusion prior to installation,
6) Installation of the roof assembly is outside the scope of this evaluation.
7) SEMCO vents are intended to provide passive ventilation for an enclosed attic in residential constructi
applications
8) All products listed in this report shall be manufactured under a quality assurance program in compliance W
Rule 61G20-3,
SEM14001 FL16994 Page
TI "UNWOUWWWWWWW"NUM I
specifically addressed herein.
350MM
TECHNICAL SERVIcEs, LLC
COMPUANCE STATEMENT
The products evaluated herein have demonstrated compliance Mh the 2010 Florida Building Code as evidenced in
the referenced documents submitted by the named manufacturer.
R
N S
No 74021
STATE OF 40
1010%
ttttc
37
2014405-02
1638.38 -1lVj
Zachary R. Priest, P.E.
Florida Registration No, 74021
Organization No. ANE9641
CREEK Technical Services, LLC does not have, nor will it acquire, a financial interest in any company manufacturing or distribull
products under this evaluation,
CREEK Technical Services, LLC is not owned, operated, or controlled by any company manufacturing or distributing products under
this evaluation.
i I Il!lI I I!! ii I! Ill iiiiiI I! Ill ill Ill I II I: I I I! Ili Ill I1 1 li! 11111 1111 '1'' !1 1
Zachary R, Priest, P,E. does not have, nor will acquire, a financial interest in any other entity irwolved in the approval process of the
product,
SEM14001 FL16994
specifically addressed herein.
Remember.)
Various areas in the interactive version of IN
this document have direct rinks to expanded
inforrnatlon.,JugLUckjo Ul)
00
I
0
I
Zd, 6e645v"4'*c-&1
Mission Statement
Sun-Tek Manufacturing, Inc
Sun-Tek Manufacturing, its associates and vendors, are dedicated
to producing high quaRg skgUghLs that are the most econornicaftg
efficient. We will maintain a winning philosophg that the customer
alwags comes first and that our emplogees are invaluable
partners. We witi, conduct business with the highest standards of
professionalism, character and morat conduct. We wR[ continue
to grow our business within our means while providing a healft
return of investment to our customers, emplogees and principals.
ffikk".
5L
u II 61T1 kSKYHTS
About Sun-Tek
In business for over 30 years
Shipping Nationwide
100% American Owned & Operated
Experience with Big Box Retailers
Extensive Special Order experience
Flexibility in developing exclusive in-house stock p"rarns to
shorten lead times and reduce inventory carrying costs. (i.e.
increased turns).
Customer Service
Knowledgeable: The average years of service at Sun-Tek for all
Customer Service Reps is 18 years.
Direct Access to Engineering for Detailed/Complicated questions.
A full line of brochures, flyers and technical materials available
Active aye site supporting all informational needs for customer
use
P
Glass Skylights -
Polycarbonate Skylight
Tubular Skylights - I r
10 Models / 17 standard sizes
Multi -tube System - 5 Configuration Models
Extreme Weather Units - 6 Models for call Applications
Self Flashing & Curb Mount Commercial Models
We fabricate custom skylights in both Glass & Polycarbonate on a
daily basis
1. WATER DIVERSION CHANNELS
0 Four 3/16" high fins spaced 1" apart
0 Designed to channel water off skylight
0 Allow for dry application of shingle to flange
0 Used in connecting skylights for grid system
2ANTERGRALGLAZING SYSTEM
F", 0 EPDM rubber serves as seat for glass to rest on.
Soft and protective
0 Silicone used to fasten glass to aluminum frame
0 Eliminates fasteners and thus pressure points
0 Complete continual seat
0 30+ year life expectancy
50% expansion tolerance allows glass to free float
and move with roof
Commercial process of glazing glass pioneered by
silicone manufacturers GE and Dow Chemical for
many years
3. FLASHING SYSTEM
0 4" wide aluminum flange
0 0.06" gauge thickness
Pre -drilled for nailing (fasteners supplied)
0 Sturdy one-piece construction allows for quick and
effective installation
Underneath side scored for grid system
Heliarc welded corners
20 year corrosion through guarantee
4. CLASSIC CURB
One-piece outer aturninum curb
zWkildifiLegfated system with flange
0 A varietg of profiles available to suit any roof type,
0 Interior of clear, treated, naturalYelLow Pine can be
painted or stained
a.
GLAZING
Duat seated " insulated glass
uty`siticone dual seat 'remco wiggte`
Choice of how E, tempered, laminated, clear or
bronze glass in combination
0 year gtass warranty
6. THERMAL PROPERTIES
Zero" air Mnfittration
Energy efficient wooden interior
Special wick system to remove condensation.
o condensation build-up
Continuous butyl rubber gaskets are integrated into
wooden curb for maximum seat
0 Elegantly designed light low profile
o ugly exterior fasteners
Simple to ctean and maintain
tiY Choice of white, milt, antique bronze or bright
copper
4 YbY Y,.YxYt ,
4 Operating hardware designed by Truth Hardware
Y the most effective and efficient in the industry
Y , Crank assembly will withstand 160 tbs. of pressure
Extension poles and universatjoints available for
those hard to reach places
Electric motors with easy installation available for
Y, all vented models
Y
S;€jrr-Tc* Ma r€.€P c. ! rr , Ifr ; : 3 C: r sr€f Gr € rh<€r t; , €. , `t3 f . E '; .x ,.x 1 51 = €sr %" , :r,€ lek c,
Wind speed Unetsave changed because of the improved science such as computer simulations.
This new science has led to taking a more complex took at keg hurricane characteristics. Each
wind speed tine value is different for the 2010 standard duQ tQ-a&hangg in thg mfinA3pg
L11—cu—ta—Cain hit "h
qw6tA f*414
1
The new maps, when used in combination with the 1,0 toad factor on Wind for strength design and the 0.6 factor on wind for
attowabte stress design, restA In a not decrease In design wind loads In hLwrkaw
Old Mappronereglons. Parts of southern Florida are approximately the same due to ASCE 7 05there -introduction of Exposure D for the coasts. In the remainder of htwicane-
pmne reglons, U* design vAnd presstm haw achmft deawsed on average
140appOdmately130 130
2M from the 101 93
SEE 7 -05
levels. 108 New Map 89 101
ASCE 7 - 10 93
wlwn
116 tit
NI:
1, 160 P- It, PCtd'
While there wiR be some
confusion as these new
numbers become the
established norm, working
ctoselg with att involved in
projects from the sales desk
aft the way through your toc
countg inspectors shoutd
helpful professionals at Sun -
To calculate the Norninat Velocity is to
rnulriptg the Ultimate Vetocity (found on
the Vetontg Maps provided by AE 7-10) N,
the square root of the value 0.6, Ma
f"
A"" we
Um
AF'
SUMMEORMAMN NOTE: Interior opening & roof opening are the same.)
Applies to both the Self Flashing Curb Mounted)
TU BE LENGTH RECOM04ENM NVtG14Tfmm
INCLUDED TUBE LENGTH
1
ROWDECK
M— — —,- ax: 10 feet 150 square feet — Min: 18 inches
Max- 20 feet
W: 18 inches
Max: 30 feet 450 square leel Mim 18 inches
TbID-OW •
One-piece seamless construction made of UV stable polUcarbonate,
Very high impact resistance (30 times stronger than acrylic)
Blacks 99% of damaging UV rays
Exclusive "roof -grip" ridges increase sealant bonding area by 30% over a similarly sized f tat Range
Fasteners: 10 inch installed With (21) #8 screws; 14 inch - (21) #8 screws; 21 inch - (35) #8 screws
Meets or exceeds all Hurricane Wind zone and impact criteria
exhibit superior performance for years to come.
This polycarbonate material has been tested and approved for use in Metro Dade approved skUtights.
TbgjjLbk
Tube is made from Alancid Mird"I material. The aluminum sheet is covered with super reflective and reflection reinforcing layers
using a PVD process (Physical, Vapor Deposition).
Virtuatty no iridescence so the sun shines through with no prismatic effect to the color. Excellent Color Rendering Index (CRI)
which means you get the true color of the right shining.
Optical Properties
Total Reflectance 95% (Minimum)
Image Clarity 90% (Minimum)
Specutar Reflectance 92% (Minimum)
Diffuser Reflectance 0.01% (Maximum)
Each unit ships with 2 elbows (15" length when straightened) and 1 22" straight connector. The elbows for all three sizes are 15
inches tong (where straight); and rotate up to 45 degrees. Total tube length included in the box is 48" Additional elbows and/or
straight connectors are available. TUpicattU, only additional straight connectors would be needed.
Each diffuser tens is held in place with magnetic catches to allow for easy removal forcteening/right bulb changing.
Gasket around diffuser (already applied) prevents any air from getting into the tube.
MWIMW
10 year limited warranty - See Installation Instructions
TkWOUAW
The 5_.,un_-TekT,,ibe has been tested to the followinv, s"cifications- AAMA1600-90, AAMA 1605.1-87 & FMHCSS, Part 3280-305_
DCBCCD PA201, PA202, PA203 (impact protocol) ICBO AC16 (criteria for Plastic Skylights)(calcutation for snow load). The 21"
Sun-Tek Tube tested at the National Certified Testing Lab facility. The tube was tested to a wind speed of 281 miles per hour (202.8
tbs. per square foot of pressure) wilbW failure. The test was terminated at this Wind speed. (See Vwrep or cott Customer Service
for test resutts)
Qftrr
a Included is one tube of STS 100Q our butyl sealant.
Included is ten yards of aluminum tape.
Also included is a galvanized steel (22" gauge) roof collar, that can be used by the homeowner in the event that they cut the roof
opening too large.
The sizes of the collar are:
T9b, CAUKDJ11190-to
10, 14' collar
14' 18" collar
21' 25" collar
Further information on all parts and components used in the Sun-Tek Tube is available from Sun-Tek Manufacturing.
Azeessodes,
20"ant!48 Extenslam - available for situations requiring more than 48"of tubing
SO -Watt Light YJt - extra light source, day or night
Ftbow Connectors - elbows that turn up to 45" angle to get around obstruction
Aturninum Curb - one-piece aluminum curb for use with curb mount tube
Shattow Attic Accessory - for shaLLow attics and cathedrat callings where there isn't room for stock tube length
060* EXTRUDED SILICONE
ALUMmum FRAME SEAL
INNER DOME
SANTOPRENE
GASKET CONDENSATION
GUTTER
CLOSED
CELL FOA14
PVC TAPE
070' ExTpumo
ALUMiNum FRAME ST0000
cups Hvw
6' (), OR 1z,
Cuvom
A"A'LABLE
OPENRNII51FL04GE
1. POLYCARBONATE (STANDARD)
30 times more impact resistant than Acrylic
and at a competitive price
2. THERMO FORMED OVERTHE CURB
Can't leak - Two continuous sheets of
polycarbonate wrapped around and down
the curb
3. FASTENED
More stability with the outer aluminu
ring and the polycarbonate secured wi
fasteners through the curb
I]
0VTE,R DOME
WWR WME
060' EXTRUDED
ALUMWUM AWLE
S S. FAI,;TFNER
CLEARANCE
032 , 4LUVINUM
CUPS WALL
0
SEALANT TAPE
SANTOPRENE GASKET
CONDENSATION
CUTTER
SIRUCTURAL SEALANT
1. ACRYLIC (STANDARD)
Much more likely to fracture over time
2. JUST RESTS ON THE CURB
Subject to leakage from wicking back under
the acrylic sheet
3. NOT FASTENED TO THE CURB
The acrylic sheet is not fastened directly
to the curb. Structure and stability can be
compromised under load.
Skylight fall protection
shall be manufactured from
not less that ,1875 (316") diameter
steel galvanized sense.
The openings in the wireshall
not exceed 4 x " The screen
shall be attached to a
steel frarne made of ,i 875 3116'(
steel angle using the MIG
welding process. The screen
shall be yeAded at each vertical
intersection between the
frame and the rnesh. The
fra as krly skald be attached
to the skyl"aghtusing a
compression fit heldin place
by two(2) 3f8"c{ am ter threaded
steel ends, The
Fall Protection Screen shall
be constructed and installation
such that it can withstand
a 200 Ixaund toad applied
perpendicularly at any area
screen, Fall ProtectionScreen
designed such that when
loaded the skyledit under
the screen wlil not break
Prefabricated
galvanized stee4
areescreen, 3r"t6x3f"d6steel angle
and 3/8 diameter threaded sted
rod C.-I'
ll, iq I,
i it Y a4
iE ACRYLIC PLEXIGLASTR BUTYRATE 7 l
IDeflection
Ternp,
Heat slypsi, 2CA
psi
TensilIIIIIII le111
I d Strength I(psi)Tensile
Iq
IIIIINI
II 11u lIII Modutus 101 (
psi) II IIIIIRackeneiHardness
I IN
Transparent Transparent
Transparent Transtucent Translucent
Translucent Of Opaque
or Opaque or Opaque REIM SUN-
1
EK MANUFACTUFUNG, INC.
SUN-"
Customer # t Ala
Customer Location:
cc M
WNER DOME
fSANTOPRENE
GASKET
VCONDENSATION
GUTTER
MASTIC TYPE SEAL
BY OTHERS)
FLAsHiNG
CLEARAA E
is .509'
070" EXTRUDED
ALUMINum FRAME
Quote Date;
Contact Name:
Phone
Fax #
Wail.
MMERCIAL c rr.l3 i,pOUN
CUTER Done
L9tr4NE060* EXTRUDED
LoMR4um FRAME tNNEF2ortE
CONDENSATION
CUTTER
a GLAZING TAPE
POLYUPETHANE
THERMAL BARRIER
HASTIc 'TYPE SEAL
BY OTHERS)
FLASHING
CLEARANCE
IS 00'
070* EXTRUDED
ALUMINUM FRAt4E
Select CCMSel t tw
Inside Frame Dimension _ Inside Frame Dimension __
PO/ rbonate Domes Colors Curb Outside
Clr r
µ
Wht Dimensions
Outer D me El El El Width _ in.
ORDERSUMMARYInnerDcame [Lenggth _ m w. in.
Frame Finish Dorms S le Qty
Mill Standard Fall iratlra PrueLBronzePyramid Fit Price f9. dI.
Yes No
WhiteEl 1:1 Freight
Load W..
Lead Time in Weeks
TO PLACE AN ORDER:
1. Fill in purchase order# above.
7. Sign & date in the space below..
Fax form to Sure-Tek Customer Service 17 or CustomerService@Sun-Tek.com Signature:
date: Upon
receipt of this signed confirmation order production of items above will be scheduled. Confirmed orders t
are n-cancellable, nonrefundable and nonreturnable. The quoted price is valid for 90 days from the date o P issue,
listed above.
Customer Location:
2
i Jll Sun-Tek Rep: Job Narne:L..,--,-,
SFT CSF TL cCRmiyi
RRC*1,EN SE FFLASHft3, OUTER D111 WiiN!SU,A Q(11 COPP, OUnR DO -ME 6', Q12'
6" 9' Cx' Q3 060' EXTRUDED
SILICONE
AL IN FRAME
SEAL I= SANTOPRENE GASKET
CONDENSATION
GuTTER
pj CLOSED
CELL
FOAM
I
PAC TA, 070'
EXTRUDED U
ALL)MwumFRA
E A V11ZL Ot
Em060' EXTRUDED
SCLICONE
Awwwm FR01E, SEAL
I'FmERELAsS INSULATION —
ROW V
Select
CSF OPTIONS',
GLAVNG TAPE
CMDENSATION
GUTTER YURETHAW
HAI.
BARRIER
M
ant te
Dome
Co rs Curb Height Roof Opening Clr Brz Wht
etried Outer Dome El
11 Width in, Inner Dome go
Length in. SUMMARY Width Frame Finish
Dome
Style Fall Protection Qty Q'ty MillStandard (Optional -
S"n&5u Price S sted) c7 MillPyrarnid-HF —'
ie- —s Ext Price0.00 0.00 W it White_
FreightE Leadrime LeadTiff* in
Weeks TOPLACEANORDER. 1. Fill
in
purchase order# above. 2. Sign &cute
in the space below. 3. Fax form
to Sun-Tek Customer Service 800-331-6607 or Custourer Serviceo, Sun-TekcomSignature: Date: upon receipt
of this
signed confirmation orderproduction of items above will be scheduled. Confirmed orders N are non -cancellable, nonrefundable
and nonreturnable. The quoted price is valid for 90 days from the date of
Ott: Mou idADPI*(select one)
FGC - Fixed Glass Ctassic
VGC - Vented Glass Ctassic
CMG - Curb MounW Glass
C4v,SL—*ew-GtK-w+1*A0wd* G63S
FHP - Fixed High Profite
TG - Tile Glass
See Attached Nice Ust
setect one)
LOE3-340 Ctea(*11ftered
LoE3-340 Lamnated
E-1 - LoE3-340 Impact
one -
select one)
B - Bronze
C - Copper
W - White
N - Natural Mill
O"'rdering Infdrmation
gPotydomeSeriesPotycarbonateSkgt* hts
h4QDe rl: (select one)
SF - Self Flashing
SFA - Self Flashing Aluminum
SFAW - Sell Flashing Aluminum w/Wood
SFAF - Self Flashing Aluminum Flat Flange
TP - Tile Potycarbonate
w/ACQde3jt
ZeDAiQ[a(seect one) CM - CurbMounted (curb required) i CMA -
Curb
Mounted turninurn (curb required) EtSe!e Attached Price List Double Dome
Exampte: Modd ----
CodejLlz -e-- DQmFr select lib
B -
Bronze (
select one)
C C
B - Bronze
C - Clear
7 C - Copper W - White
Natural Mill
select one)
C - Clear
F - Frosted
Teipte Dome
Exampte, A
r
select
one)
C - Clear
Cider t ns (select one) 1 {setect pane)
IF - Impact Sell Flashing Mass See Attached Price List
I - Impact Curb cunt
Glass09p@45_9 W9 D
s t et sane) (set ct cane)
I_u - Clear Tempered j B - Bronzee
u - amnated C - upper
La - 0 Impact W - White
Natural Mill
Extreme Weather PoLycarbonate SkyUghts
1 (select sane
MetroDade-Curb Mount A Luminum
tf it s sel ct paneCurbauntluminurr
F -Hurricane Self Flashed See Attached Price List
Dowbte Dome
W[ 94 @ [& D
Qutff Dome Jjzl
aPAa eP
Ordering Information
Tubular Skytights
0Ln (setect one) 5jZe_QpjLQQ_*_(
setect one) T" w
Sun-%k Tube Curb not tthd ri List STTSA - Sun-
T k Tube Shallow Attic fI9 gff= Im
D Bronze W-
White
C - Copper
Natural Mill
test one)
101422 _ Double
10" Roof Opening 14 " x 2 16 " 1414 0 -
Double 14" Roof Opening 1 " x 3016" C 10
14 2222 - Double 10,714 Roof Opening 2216`* 2216" 0101446 - Quad 10"
Inline Roof Opening 14W' x 4616" 0102222 w Quad
10" Roof Opening 22Y2,' x 22Y2,Q Doubte Dome select
Gros) Bronze
White C -
Copper
Natural
Mill Atso
avaitablewith ICMG
Mass Option k
For individuattized instattation instructions for your style, please refer to
our website at: www.Sun-Tek.com or speak to our helpful customer service
department representatives at 800-334-5854.
Glass Sun-Tek
FGC Tu--be
LFGC STT
FHP STTCM
VGC
TG
CMG
LCMG
CMG"
EKbme ftk*M
id SF
MDCMA SFA
CMA-D Cm
HSF CMA
1SFG TP
1CMG
FULL TEST REPORTS AMLABLE UPON REQUEST.
Testing preformed by National Certifled Testing Lab, York, PA.
consent of Sun-Tek Manufacturing, Inc.
I
LIM
RIO
I I I it rrTr*=
gm
B&I
L 3 ,3 ., LE / Larni
35
1-8 LowE / CLIR
IMESIMMMENME
IMEMEMMMOMMEMOM
e Glass Rodda Product Approvat - 12626
1
BRUNEI I I I I !I I
Curb Mounted Glass Florida Product Approval - 12627
m
I
ie Curb Mounted Glass Florida Product Approval, - 12627
Curb Mounted GIm It Florida Product Approvat - 126;j
17 E / CLR
ctor (EA .49
17 LOWE / Lami
Florida Product Approval - 14637LargeCurbMountedGlass9TDI -SK - 38
Sun*:71?k 7Vbe Curb Mounted NOA15-0513,06
4 Tested at 6
TAS 202-94
Sun-7kk Tube Rorida Product ApprovaL - 13488
8 8_21aqsg ffiBO_j LL
AAMA/WDMA / CSA 101 / 132 / A440
Ofit, r. #
I111 ' i
IM ` .EASMIRMARMARMIM
iVl
lll IIIII I
0
Y
1.
I: -1 0
please call
1-800-334-5854 or
W4 PIN"ININNI
1,!Illi, IN III 1
1, Prior to the return, the distributor must inform Sun-Tek of the material to be returned, the reason for such action, together Win the Sun-'Iek invoice and the customer
order numbers (it available).
2, If the authorization to return material Is given and an 'RGA' number is Issued, the terms are as fottows,
A. RGKs vAll be valid for sixty (60) days from date of issuance.
B, Material shall be returned by "prepaid' freight.
C Material shalt be property packaged to assure damage free shipment.
D. Material shalt be subject to inspection and if reconditioning is not required, credit will be issued at the net price of the original order, less 25% handling
charge for those items that are returned and reflect no fault or error of Sun-Tak. Material that has been approved for returns and reflects a fautt or error of
Sun -Tok will be issued credit at the net price of the original order,
E. And goods falling to pass inspection will be credited at a net price of original order, less 25% handling charge and less a reconditioning charge If the item
can be reconditioned. If the Item cannot be reconditioned, no credit will be issued and a 25% charge back willapply (applicable only toapproved returns
which reflect no fault orerror of Sun-Tek.)
R Only standard material can be returned on this basis.
32824 Pn `5,13541' a Fv 8:1 -3,],V14- 6:-,)"
H T
Three free skylights
of choice with a
2000 order.
No Charge - delivered
y Sup ek Sales
Representative
skylight Order
avatta itty aCtime of request,
For FGC & CMG If 2549
skylights with Low F glass.
Stand and poster free with
an order offive units (use
one of the five Stook units on
the display).
No charge w" an ore
ovif Fart"61
1) Three Tier Display
Holds any three models or skylights in a 2'x 2, size.
These three skylights are actual units which can be sold and installed. All traditional units can be
used in this display.
Sun-Tek Tube poster will be displayed on the top of this three tier display
Optional Logo Header without Tube Poster.
No charge with a minimum order totaffirtg $2,000
2) Free Stand Tube Skylight Display
Unit incorporated in display.
11111:11111giiipqi iiiiiji IIIIIIIIII 111
3) Free Stand Skylight Display
With FGC Background Poster
With CIVIG It Background Poster
No charge with an order of: units of FGC or CMG 11. (One unit used for display)
4) Counter Displays
With FGC Background Graphic
With CMG It Background Graphic
5) Wall Mounted Posters
Sun-Tek Line Poster
30191fimm
CMG 11 Poster
No charge with any order
6) Swing Door Display
Unit & Poster included in display
Choose FCC or CMG 11
Use for warehousing rack applications
No charge with a minimum order totalling $1,500
FOR FURTHER INQUIRIES, CONTACT YOUR SUN-TEK SALES REP OR CUSTOMER SERVICE AT 90-334-5$54 *** I
X1 S
Wando. Flovida,37R?4- glt4,.ROO-3,34-!,i$,i4.fx,-800-331-6607- Cu tonit-i,Sprvk,paz Stin-T,-k,c own - www,%jn-'TPk,ram
I
1 ''! ! ii 11
1
1
1. This promotionat allowance program provides support funds based on 50% cooperative contribution by a
Sun-Tek Distributor and is available to att authorized Sun-Tek Distributors, except mol home/modular
housing.
llllll
officer or senior official of Sun-Tek prior to display or distritbuibion thereof. Without this approval; Sun-Tek
is released of all liabilities associated \With this activity and may also deny use of applicable advertising
cooperative funds.
0 A Distributor's branch office specifically noted must purchase Sun-Tek products direct to their
account Allowance wiLL be set up against shipments invoiced in accordance with Sun-Tek records
3. Promotionatattowance credits \Al issued upon receipt of paid invoices, or other evidence of approved
expenses involved, not to exceed dottar amoW In dl tor's attowance fiM& Invoices mug be paid
prior to any prornolfion allowance reimbursement.
0 Evidence of expenses must be received by January 31 st of the following year.
0 No unused funds from the current year may be carried over into the new year.
1111111 lilgill 1111111 111 1111 ill pill III 1 11 illf! 11 ill lip 1111 1 11 l illill MINEMUSTMENW-1
1. Regional, State and Local Shows - 50% of the cost of booth space, 100% assIgned to Sun-Tek.
2. Other special promodons receiving prior written approval from Sun-Tek Vitt be reimbursed at a rate of
50% of the cost devoted to Sun-Tek.
MAI
Sun-Tek will share in the cost of a distributor Open House Program up to 50% of the cost that is devoted to
Sun-Tek. For exampte, if seven suppliers are involved in the Open House, Sun-Tek's share will be 50% of 1/7
of the Open House costs that are documented. Documentation of all cost must be included with request for
reimbursement
1. Copy of paid invoices indicating items and amounts which are to be applied against the co-op account.
2. Copy of booth space contracts showing space cost and substaining documents to determine how much
of the total space rented was used for the purpose of promoting Sun-Tek Skylights i.e., one fourth, one
third, one half, etc. A picture of the display is preferred with the request.
3. Original invoice(s) of expenses for other special promotions involving the exctusive promotion of Sun-Tek
Skyrights.
4. Tear sheets and copies of agency billings must be submitted for cooperative advertising of Sun-Tek
products,
Submit all requests and documents to:
Sun-Tek Skytights, Sates & Marketing
10303 General Drive
Orlando, Ftorlda 32824