307 Tall Pine Ln - BR18-004583 - REROOFCITY OF SANFORD
NOV 2 0, 2pjg; BUILDING & FIRE PREVENTION
PERMIT APPLICATION
i _ 0ApplicationNo: ""C
Documented Construction Value: S 6C)CO, 00
Job Address: / ( l Historic District: Yes NoR0
Parcel ID: I Q — a(- Residential;E oCommercial
Type of Work: New Addition ] A,,lteration Repair ElDemo Change of Use Move
Description of Work: — Y2Jo ( ur)S r0 l; a s-_Abyoc"
Plan Reviewsc Contact Person:
v `
1 , Title:
Phone:4U- 0 3 81OFax: Email:
Property Owner Information
Name Phone: — C' '7 7 ' V C)
Street: Sa l Resident of property?:
City, State Zip:
Name ,10M
Street:
City, State Zip:
Name:
Street:
City, St, Zip:
Bonding Company:
Address:
r Info
Y& irke:
Fax:
y
State License No.:
Architect/Engineer Information
Phone:
Fax:
E-mail:
Mortgage Lender:
Address:
WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY RESULT IN YOUR
PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. A NOTICE OF COMMENCEMENT MUST BE
RECORDED AND POSTED ON THE JOB SITE BEFORE THE FIRST INSPECTION. IF YOU INTEND TO OBTAIN
FINANCING, CONSULT WITH YOUR LENDER OR AN ATTORNEY BEFORE RECORDING YOUR NOTICE OF
COMMENCEMENT.
Application is hereby made to obtain a permit to do the work and installations as indicated. I certify that no work or installation has
commenced prior to the issuance of a permit and that all work will be performed to meet standards of all laws regulating construction
in this jurisdiction. I understand that a separate permit must be secured for electrical work, plumbing, signs, wells, pools,
furnaces, boilers, heaters, tanks, and air conditioners, etc.
FBC 105.3 Shall be inscribed with the date of application and the code in effect as of that date: 5" Edition (2014) Florida Building Code
Revised: June 30, 2015 Permit Application
NOTICE: In addition to the requirements of this permit, there may be additional restrictions applicable to this property that may be
found in the public records of this county, and there may be additional permits required from other governmental entities such as water
management districts, state agencies, or federal agencies.
Acceptance ofpermit is verification that I will notify the owner of the property of the requirements of Florida Lien Law, FS 713.
The City of Sanford requires payment of a plan review fee at the time of permit submittal. A copy of the executed contract is required
in order to calculate a plan review charge and will be considered the estimated construction value of the job at the time of submittal.
The actual construction value will be figured based on the current ICC Valuation Table in effect at the time the permit is issued, in
accordance with local ordinance. Should calculated charges figured off the executed contract exceed the actual construction value,
credit will be applied to your permit fees when the permit is issued.
OWNER'S AFFIDAVIT: I certify that all of the foregoing information is accurate and that all work will
be done in compliance with all applicable laws regulating construction and zoning.
Signature of Owne A ent / Date Sign of Contractor/Agent Date
His IT
Lu
Owner/Agent •s Personally Known to Me or
Produced ID Type of ID
Print ;Antr*tor/Agent's
CARAL. LARACUENTE
c* Commission # GG 208031
t a= Expires April 16, 2022
TFOFF p' Bp Thro Troy Fain hnuffi a 80"W70i9
Contractor/Agent is ersonally Known to Me or
Produced ID Type of ID
BELOW IS FOR OFFICE USE ONLY
Permits Required: Building Electrical Mechanical Plumbing[] Gas Roof
Construction Type:
Total Sq Ft of Bldg:
Occupancy Use:
Min. Occupancy Load:
New Construction: Electric - # of Amps
Fire Sprinkler Permit: Yes No
APPROVALS: ZONING:
ENGINEERING:
COMMENTS:
of Heads
UTILITIES:
FIRE:
Flood Zone:
of Stories:
Plumbing - # of Fixtures,
Fire Alarm Permit: Yes No
WASTE WATER:
BUILDING:
Revised: January 1, 2018 Permit Application
POWER OF ATTORNEY
Date:
I hereby name and appoint
of TOTAL HOME ROOFING to be my lawful attorney.
In fact to act for me and apply to the Building Department for a
RE -ROOF permit.
For work to be performed at a location described as: }
Parcel ID: _ U
Subdivision: oLqd
Owner of property and address:
6-1
And to sign my name and do all things necessary to this appointment. V
ROBERT DON CCC1330489
Type or prin me of certified contractor and license number)
Signature of certified contractor)
The foregoing instrument was acknowledged before me this a day of % of 20
by Robert Donovan, who is personally known to me.
WA L UUTACUENTEStateofFlorida =; rya,#GG208W1a:
County of Seminol .
0
8% 7M
Notary signatu
Grant Malo , Clerk Of The Circuit Court & Comptroller Seminole County, FL
Inst #2018f29407 Book:9248 Page:1256; (1 PAGES) RCD:•11/14/2018 2:42:23 PM
REC FEE $10.00
THIS INSTRUMENT PRE% ED BY:
Name: /l
Address:
NOTICE OF COMMENCEMENT
Permit Number.
Parcel ID Number. TO — CD {- Vie) , /v
The undersigned hereby gives notice that improvement will be made to certain(Jreaall property, andInaccordance with Chapter 713, Florida Statutes, the following
information is provided in this Notice of Commencement. of
the property and street address if available) 2.
GENERAL DESCRIPTION OF Re -
roof Onllv 3.
OWNER INFORMA Name
and address, Interest
in property: n
Fee Simple Title Holder (if other than owner listed above) Name: J1
Address: 4. ,
CONTRACTOR: Name: Total Home Properties DBATotal Home Roofinc Phone Number: 407-960-3810 Address:
201 W State Rd. 434 Winter Springs, FL 32708 Suite A 5.
SURETY (if applicable, a copy of the payment bond Is attached): Amount
of Bond: 6.
LENDER: Name: Phone Number: Address:
7.
Persons within the State of Florida Designated by Owner upon whom notice or other documents maybe served as provided by Section 713.13(1)(a)7., Florida Statutes. Phone
Number: 8.
In addition, Owner designates of to
receive a copy of the Lienors Notice as provided in Section 713.13(1)(b), Florida Statutes. Phone number: 9.
Expiration Date of Notice of Commencement (The expiration Is 1 year from date of recording unless a different date is specified) WARNING
TO OWNER: ANY PAYMENTS MADE BY THE OWNER AFTER THE EXPIRATION OF THE NOTICE OF COMMENCEMENT ARE CONSIDERED
IMPROPER PAYMENTS UNDER CHAPTER 713, PART 1, SECTION 713.13, FLORIDA STATUTES, AND CAN RESULT IN YOUR PAYING
TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. A NOTICE OF COMMENCEMENT MUST BE RECORDED AND POSTED ON THE JOB
SITE BEFORE THE FIRST INSPECTION. IF YOU INTEND TO OBTAIN FINANCING, CONSULT WITH YOUR LENDER OR AN ATTORNEY BEFORE
COMMENCING WORK OR RECORDING YOUR NOTICE OF COMMENCEMENT. a
Id, 6- Owner Si
ture of Owner or Lessee, or Owm Owner'sorLessee's (Print Name andProvide Signatory's TldelOffice) AuthonzedOfficer/Director/Partner/Manager) UR—a
StateofCountyof 11' V\ l T , ,J1 ( The foMgolngumentwasak *wledged before me this day of V ' I , 20' by . Who
is personally known to me 0 OR ^ O me ofpersonmaidnstatementCtiwhohasproducedidcationttaofidentificationproduced: V CARA L
LARACUENTE s Commission # GG
208031 Notarysignature P Expires
Awl16.2= R°' Bwded1ftwTMyrbialnswM800Q%$-70i9
M
4jrM ,}G/'i01 MINE BREVARD
COUNTY OFFICE 321-
452-9223 TOTALH
O A u
ORANGE &
SEMINOLE COUNTY OFFICE 407-
960-3810 m
VOLUSIA COUNTY OFFICE 386-
233-3244 NAME:
j,1tJ Z STREET:
3o- °i-,Li- Pim& CCC1330489 CITY/
STATE/ZIP: ^ A
HOMEPHONE: 5'fN,W A 4 _ CELL
PHONE: _ L321
T 1J2.io EMAIL: tf..
a hv; hMkROOFDueCaretakentoprotecthomeexterior, shrubs and landscaping. Includes
labor to remove existing roof and haul off. Includes
Dumpster. Roll off dumpster for paver driveways. Includes
inspecting deck for damage and renailing to code with 8D ring shank nails. Includes
saving gutters, soffit, fascia on existing home (some damage may occur in construction):i'' l Includes
replacing ridge vents. Includes
replacing existing drip edge in choice of color. DRIP EDGE COLOR INT Includes
1 1/4" roofing collated nails. Includes
installing new shingles in choice of color. SHINGLE COLOR INT Includes
replacing all lead boots and goose vents (does not include gas related vents). Includes
new galvanized metal in all valleys. Includes
Starter Shingle and Ridge Cap per Code. Includes
obtaining and posting permit with local jurisdiction. Includes
magnetically sweepingjob site, cleaning out gutters and hauling away debris. MATERIAL
ARCHITECTURAL ASPHALT LIFETIME SHINGLES 130MPH UNDERLAYMENT
PEEL&STICK ,- p ,r A/r /.,, 7t %
J1 T!w`i/ y MISC
fJ '
C)z V,?AJ IS' 4 f= INCLUDES
LABOR AND DUMPSTER TO REMOVE I LAYERIS) OF SHINGLES. ADDITIONAL
LAYERS WILL COST $&-10— PERLAYER ADDITIONAL LAYERS INT Deteriorated
existing decking replaced at $ (Jc per sheet of plywood 2 S % jJ f• j L Deteriorated
existing decking replaced at $ `£ per linear ft. WOOD ACKNOWLEDGMENT INT Does
not include painting to match Does
not include any stucco repairswhere deterioratedFlashing had to bereplaced. WARRANTIES
WArt>i'-F r" Iri 7 - - INCLUDED Worry -
Free Platinum inclusive $ Flat
roofs carry a ^ CUSTOMER
WAIVES INTERIOR DAMAGE PREANSPECTION • Customer Initials (f T'
rAnyinteriordamagewhichoccursduringconstructionwillnotbecoveredINCLUDES
NEW WIND MITIGATION INSPECTION TOTALj? EASY
FINANCING OPTIONS Monthly
Payment 9.
90% APR Is 12
months NO INTEREST Is Through
Wells Fargo Bank with approved credit. Financing
must be complete ®prior to start of project. f
CUSTOMER
SI NATURE DATE TOTAL HOME ROOFING DATE I
HAVE READ AND UNDERSTAND THIS PROPOSAL, THE TERMS AND CONDUTIONS, AND ALL DOCUMENTS REFERENCED THEREIN AND AGREE TO BE BOUND BY THEIR TERMS.
ACCEPTANCE
OF PROPOSAL: The above prices, their specifications and conditions are satisfactory and are hearby accepted. Contractor is authorized to do the work as specified.
By signing Customer acknowledges that Customer is owner of the property where work is to be performed. ALL
PAYMENTS ARE DUE UPON COMPLETION OF THE PROJECT. Any
delay in payments mayresult in 1.S% interest per 30 days. Wind
Mitigations are not considered part of the project but offered as a service to our customers through a thirdparty certified licensed inspection company and shall not
be used as reason for any delay of final payment. This
agreement constitutes the entire contract by and between contractor and owner and parties are not bound by oral expressions or representation by any party or agent
of either party.
6/15/2018 Florida Building Code Online
n
RL01410A Do RTM6NT OF
Business & Professionai Regulation
Florida
Diu Ctt Ikr . P.aa nal iim pr
IkO,FFIGE OF THE
S> GRETARY
BCIS Home I Log In I User Registration I Hot Topics I Submit Surcharge
Product Approval
USER: Public User
Stats & Facts I Publications I FBC Staff I e
Product Approval Menu > Product or Application Search > Application List > Application Detail
FL #
Application Type
Code Version
Application Status
Comments
Archived
Product Manufacturer
Address/Phone/Email
Authorized Signature
Technical Representative
Address/Phone/Email
Quality Assurance Representative
Address/Phone/Email
Category
Subcategory
Compliance Method
Florida Engineer or Architect Name who developed
the Evaluation Report
Florida License
Quality Assurance Entity
Quality Assurance Contract Expiration Date
Validated By
FL10674-R13
Revision
2017
Approved
Owens Corning
One Owens Corning Parkway
Toledo, OH 43659
740)404-7829
greg.keeler@owenscorning.com
Greg Keeler
greg.keeler@owenscorning.com
Mel Sancrant
1 Owens Corning PKWY
Toledo, OH 43659
419)376-8360
mel.sancrant@owenscornig.com
Roofing
Asphalt Shingles
Evaluation Report from a Florida Registered Arc
Professional Engineer
Evaluation Report - Hardcopy Received
Robert J.M. Nieminen
PE-59166
UL LLC
05/16/2020
John W. Knezevich, PE
Validation Checklist - Hardcopy Received
https://www.floridabuilding.org/pr/pr_app_dtl.aspx?param=wGEVXQwtDgtBNbEY5V%2boQT%2b6w7ahRegICQ8ucR6ixEBFhs7tvJgZew%3d%3d 1/3
6/15/2018 Florida Buidding Code Online
Certificate of Independence
Referenced Standard and Year (of Standard)
Equivalence of Product Standards
Certified By
Sections from the Code
Product Approval Method
Date Submitted
Date Validated
Date Pending FBC Approval
Date Approved
Summary of Products
FL10674 R13 COI 2017 01 COI Nieminen.pc
Standard
ASTM D3161
ASTM D3462
ASTM D7158
Method 1 Option D
10/10/2017
10/11/2017
10/15/2017
12/12/2017'
FL # Model, Number or Name Description
10674.1 Owens Corning Asphalt Roofing 3-tab, 4-tab, 5-tab, laminated, start
Shingles and Starters
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL10674 R13 II 2017 10 FINAL
Approved for use outside HVHZ: Yes SHINGLES FL10674-R13.pdf
Impact Resistant: N/A Verified By: Robert 3. M. Nieminen I
Design Pressure: N/A Created by Independent Third Part)
Other: Refer to ER, Section 5. Evaluation Reports
FL10674 R13 AE 2017 10 FINAL
SHINGLES FL10674-R13.pdf
Created by Independent Third Part
Back FN..tl
Contact Us :: 2601 Blair Stone Road, Tallahassee FL 32399 Phone: 850-487-1824
The State of Florida is an AA/EEO employer. Copyright 2007-2013 State of Florida.:: Privacy Statement :: Accessibility Stat
Under Florida law, email addresses are public records. If you do not want your e-mail address released in response to a public-recc
mail to this entity. Instead, contact the office by phone or by traditional mail. If you have any questions, please contact 850.4I
455.275(1), Florida Statutes, effective October 1, 2012, licensees licensed under Chapter 455, F.S. must provide the Department
one. The emails provided may be used for official communication with the licensee. However email addresses are public record. If y
address, please provide the Department with an email address which can be made available to the public. To determine if you are
please click here .
Product Approval Accepts:
L ® ECIIECR M
Credit Card
Safe
https://www.floridabuilding.org/pr/pr_app_dtl.aspx?param=wGEVXQwtDgtBNbEY5V%2boQT%2b6w7ahRegICQ8ucR6ixEBFhs7tvJgZew%3d°/a3d 2/3
QOTRINITYIERD
EVALUATION REPORT
Owens Corning
One Owens Corning Parkway
Toledo, OH 43659
740)404-7829
EXTERIOR RESEARCH & DESIGN, LLC.
Certificate ofAuthorization #9503
353 CHRISTIAN STREET, UNIT #13
OXFORD, CT 06478
203) 262-9245
Evaluation Report 037940.02.12-R8
FL10674-1113
Date of Issuance:02/06/2012
Revision 8: 10/09/2017
SCOPE:
This Evaluation Report is issued under Rule 61G20-3 and the applicable rules and regulations governing the use of
construction materials in the State of Florida. The documentation submitted has been reviewed by Robert Nieminen,
P.E. for use of the product under the Florida Building Code and Florida Building Code, Residential Volume. The
products described herein have been evaluated for compliance with the 6th Edition (2017) Florida Building Code
sections noted herein.
DESCRIPTION: Owens Corning Asphalt Roof Shingles
LABELING: Labeling shall be in accordance with the requirements the Accredited Quality Assurance Agency noted
herein and FBC 1507.2.7.1 / R905.2.6.1.
CONTINUED COMPLIANCE: This Evaluation Report is valid until such time as the named product(s) changes, the
referenced Quality Assurance documentation changes, or provisions of the Code that relate to the product change.
Acceptance of this Evaluation Report by the named client constitutes agreement to notify Robert Nieminen, P.E. if the
product changes or the referenced Quality Assurance documentation changes. TrinityJERD requires a complete
review of this Evaluation Report relative to updated Code requirements with each Code Cycle.
ADVERTISEMENT: The Evaluation Report number preceded by the words "Trinity I ERD Evaluated" may be displayed in
advertising literature. If any portion of the Evaluation Report is displayed, then it shall be done in its entirety.
INSPECTION: Upon request, a copy of this entire Evaluation Report shall be provided to the user by the manufacturer or
its distributors and shall be available for inspection at the job site at the request of the Building Official.
This Evaluation Report consists of pages 1 through 8.
Prepared by:
Robert JI M. Nieminen, P.E.
Florida Registration No. 59166, Florida DCA ANE1983
y
The facsimile authorized
4n ..... nen, P.E. on 10/09/2017. Thsnot serve as an Nieminen, electronically
signed document. CERTIFICATION
OF INDEPENDENCE: 1.
Trinity lERD does not have, nor does it intend to acquire or will it acquire, a financial interest in any company manufacturing or distributing
products it evaluates. 2.
Trinity ERD is not owned, operated or controlled by any company manufacturing or distributing products it evaluates. 3.
Robert Nieminen, P.E. does not have nor will acquire, a financial interest in any company manufacturing or distributing products for which
the evaluation reports are being issued. 4.
Robert Nieminen, P.E. does not have, nor will acquire, a financial interest in any other entity involved in the approval process of the product.
5.
This is a building code evaluation. Neither TrinitylERD nor Robert Nieminen, P.E. are, in any way, the Designer of Record for any project
on which this Evaluation Report, or previous versions thereof, is/was used for permitting or design guidance unless retained specifically
for that purpose.
I TRINITY ERD
ROOFING SYSTEMS EVALUATION:
1. SCOPE:
Product Category: Roofing
Sub -Category: Asphalt Shingles
Compliance Statement: Owens Corning Asphalt Roof Shingles, as produced by Owens Corning, have demonstrated
compliance with the following sections of the 6th Edition (2017) Florida Building Code and Florida Building Code,
Residential Volume through testing in accordance with the following Standards. Compliance is subject to the
Installation Requirements and Limitations / Conditions of Use set forth herein.
2. STANDARDS:
Section Property Standard Year
1507.2.5, R905.2.4 Physical Properties ASTM D3462 2010
1507.2.7.1, R905.2.6.1 Wind Resistance ASTM D3161 2016
1507.2.7.1, R905.2.6.1 Wind Resistance ASTM D7158 2011
3. REFERENCES:
Entity Examination Reference Date
UL LLC (CER9626) Physicals & Wind Resistance File R2453, Vol. 3 02/15/2007
UL LLC (CER9626) Physicals & Wind Resistance 20120516-112453 05/16/2012
UL LLC (TST9628) Physical Properties 06CA20263 04/18/2006
UL LLC (TST9628) Wind Resistance 11CA34308 02/18/2012
UL LLC (TST9628) Physicals & Wind Resistance 4786093137 02/01/2014
UL LLC (TST9628) Wind Resistance 4786126532 02/10/2014
UL LLC (TST9628) Physical Properties Classification letter 02/13/2014
UL LLC (TST9628) Physical Properties Classification letter 10/02/2015
Miami -Dade (CER1592) FBC HVHZ Compliance Various NOAs Various
UL LLC (QUA9625) Quality Control Service Confirmation Exp. 05/16/2020
4. PRODUCT DESCRIPTION:
4.1 Asphalt Shingles:
4.1.1 Classic® and Supreme® are fiberglass reinforced, 3-tab asphalt roof shingles.
4.1.2 Berkshire are fiberglass reinforced, 4-tab asphalt roof shingles.
4.1.3 DevonshireT' are fiberglass reinforced, 5-tab asphalt roof shingles.
4.1.4 Duration®, TruDefinition® Duration®, Duration® Premium Cool, TruDefinition® Duration Designer Color
Collection, TruDefinition®Oakridge®, Oakridge® and WeatherGuard® HP are fiberglass reinforced, laminated
asphalt roof shingles.
4.2 Hip & Ridge Shingles:
4.2.1 Berkshire® Hip & Ridge Shingles, High Ridge, WeatherGuard® HP Hip & Ridge Shingles, ProEdge Hip & Ridge
Shingles and DuraRidgeT1 Hip & Ridge Shingles are fiberglass reinforced, hip and ridge asphalt roof shingles.
4.3 Accessory Starter Strips:
4.3.1 Starter Strip Shingle, Starter Strip Plus and Starter Shingle Roll are starter strips for asphalt roof shingles.
S. LIMITATIONS:
5.1 This is a building code evaluation. Neither TrinityJERD nor Robert Nieminen, P.E. are, in any way, the
Designer of Record for any project on which this Evaluation Report, or previous versions thereof, is/was used
for permitting or design guidance unless retained specifically for that purpose.
5.2 This Evaluation Report is not for use in FBC HVHZ jurisdictions.
5.3 Fire Classification is not part of this Evaluation Report; refer to current Approved Roofing Materials Directory
for fire ratings of this product.
Exterior Research and Design, LLC. Evaluation Report 037940.02.12-R8
Certificate of Authorization #9503 6" EDITION (2017) FBC NON-HVHZ EVALUATION FL10674-1113
Owens Corning Asphalt RoofShingles Revision 8: 10/09/2017
Page 2 of 8
TRINITY ERD
5.4 Wind Classification:
5.4.1 All Owens Corning asphalt shingles noted herein are Classified in accordance with FBC Tables 1507.2.7.1
and R905.2.6.1 to ASTM D3161, Class F and/or ASTM D7158, Class H, indicating the shingles are acceptable
for use in all wind zones up to Vasd = 150 mph (Vuit = 194 mph). Refer to Section 6 for installation
requirements to meet this wind rating.
5.4.2 All Owens Corning hip & ridge shingles, Starter Strip Shingle and Starter Strip Plus noted herein are
Classified in accordance with FBC Tables 1507.2.7.1 and R905.2.6.1 to ASTM D3161, Class F, indicating the
shingles are acceptable for use in all wind zones up to Vasd = 150 mph (VUit = 194 mph). Refer to Section 6 for
installation requirements to meet this wind rating.
5.4.3 Classification by ASTM D7158 applies to exposure category B or C, as defined in FBC 1609.4.3, and a mean
roof height of 60 feet or less. Calculations by a qualified design professional are required for conditions
outside these limitations. Contact the shingle manufacturer for data specific to each shingle.
5.4.4 Refer to Owens Corning published information on wind resistance and installation limitations.
5.5 All products in the roof assembly shall have quality assurance audit in accordance with F.A.C. Rule 61G20-3.
6. INSTALLATION:
6.1 Underlayment:
6.1.1 Underlayment shall be acceptable to Owens Corning and shall hold current Florida Statewide Product
Approval, or be Locally Approved per Rule 614320-3, per FBC 1507.2.3, 1507.2.4 or R905.2.3.
6.2 Asphalt Shingles:
6.2.1 Installation of asphalt shingles shall comply with the Owens Corning current published instructions, using
minimum four (4) nails per shingle in accordance with FBC 1507.2.7 or R905.2.6, with the following
exceptions:
Berkshire shingles require minimum five (5) nails per shingle.
WeatherGuarde HP shingles require minimum six (6) nails per shingle.
Devonshire*" shingles require minimum six (6) nails per shingle.
Starter Strip Shingle and Starter Strip Plus require minimum five (5) nails per strip.
Refer to Owens Corning published information on wind resistance and installation limitations.
6.2.2 Fasteners shall be in accordance with the manufacturer's published requirements, but not less than FBC
1507.2.6 or R905.2.5. Staples are not permitted.
6.2.4 Where the roof slope exceeds 21 units vertical in 12 units horizontal, special methods of fastening are
required. See figures below for details.
6.2.5 Minimum Nailing —Starter Strip Shingle and Starter Strip Plus:
Felt underlayment Deck
Self -adhered
WeatherLocke
underlayment
Drip,
edge
Drip edge
Nails located
2"-3"from eave
Install first Self-sealing adhesiveStarterStripedpositionalongeaveshingle
with \ 6"
removed Starter
Strip shingle overhangs eaves and rakes Fat
underlayment / Deck Self -adhered WeatherLockS
underlayment
li
Drip
edge edge
Nails
located 2"-
3" from lave adhinstal
rustStarterStripPlusSosnedalongaavewith
6' removed positioned Starter
Strip P rs overhangs eaves and rakes 1/4"-3/4" Exterior
Research and Design, L-C. Evaluation Report 037940.02.12-R8 Certificate
of Authorization #9503 6' EDITION (2017) FBC NON-HVHZ EVALUATION FL10674-1113 Owens
Corning Asphalt Roof Shingles Revision 8: 10/09/2017 Page
3 of 8
6.2.6 Minimum Nailing — Classic®& Supreme:
Normal Mansard or Area porn
Wind Areas High Wind desvanes y
Area pare vientos normales Areas vientos fuertes
r IAI t., 1. IB 2• t"
tt• tt•
5"Exposure
Exposici6n
6.2.7 Minimum Nailing — Berkshire®:
Stanaara rastenlne Pattern
Normal Mansard or Area pare
Wind Areas High Wind desvanes y
Area pare vientos normaies Areas Wanton fuertes
tzt t2t
6 5/8• Exposure
Exposici6n
Sealant strip
Le Cra de sellador
sa>•a®
e - a .-+ e e att8%" I 81h. 8W I 8%"
t"
6-Nail Fastening Pattern
Exterior Research and Design, I.I.C. Evaluation Report 037940.02.12-R8
Certificate of Authorization #9503 6' EDITION (2017) FBC NON-HVHZ EVALUATION F1.10674-1113
Owens Corning Asphalt Roof Shingles Revision 8: 10/09/2017
Page 4 of 8
6.2.8 Minimum Nailing — Devonshire"':
1'= I 7" 8" $" 1 8° I 7- I _fin
a,wn
5.5/8- exposure Sealant locationFxposia6nde5 -5/8 pulg Ubicaci6n del sellador
Standard 6-Nail Fastening Pattern
TRINITYJ ERD
WE-- W = i
II__ IllI LEA
Ten 1" Spots of Asphalt Roof Cement
Mansard or Steep Slope Fastening Pattern
6.2.9 Minimum Nailing — Duration®, TruDefinition® Duration, Duration® Premium Cool & TruDefinition•
Duration Designer Color Collection:
4-Nall Fastening Pattern
sw•Nailat Wtoi ns m wlAw
Mail, lypiCal
r +r +^
w-.c •. • i t .-.o • o.-- t •
F1 F F --j
Standard Fastening Pattern
6-Nall Fastening Pattern
sw•raiaoasa" W" WM
Na141yp"
r +r +r +^
F1 F F1
rvidnsdru ui .xeep Diupe rdxennig rdueni
Exterior Research and Design, U.C.
Certificate of Authorization #9503 6' EDITION (2017) FBC NON-HVH2 EVALUATION
Owens Corning Asphalt Roof Shingles
6-Nail Fastening Pattern
Evaluation Report 037940.02.12-118
FL10674-1113
Revision 8: 10/09/2017
Page 5 of 8
6.2.1 Minimum Nailing —TruDefinition' Oakridge®,Oakridge®: 4
Nall Pattem Esquema
cat 4 claws Standard
Fastening PatternI
l
TRINITY (ERD 6
Nail Pattern Esquema
con 6 claws 1•
r s—
1r 1r Nalls
5SJV' Exposum C a0s5 sAr Exposwo Erposiddit
de 66/8pulg Exposteft do 66/8 pulpFastening
for Slopes Greater Than 21:12 funNtl/
a hstsnlnemoa MEN Nall,
7ypi7 12' ov
7" Spots of lbpnaRRoofng C. ffl Mansard
or Steep Slope Fastening Pattern 6.
2.1 Minimum Nailing — WeatherGuard® HP: 6-
Nail Fastening Pattern mole
Ode View WWII*
hmbwAd s. ::;
e• Ilistwrr7lnw* FMI Wito Ci1
ea erin.. de flFes le Exterior
Research and Design, I.I.C. Evaluation Report 037940.02.12-118 Certificate
of Authorization #9503 6i" EDITION (2017) FBC NON-HVHZ EVALUATION FL10674-1113 Owens
Corning Asphalt Roof Shingles Revision 8: 10/09/2017 Page
6 of 8
6_3 Hip & Ridge Shingles:
a a
6.3.1 Installation of Berkshire Hip and Ridge Shingles, High Ridge, WeatherGuard HP Hip and Ridge Shingles
and ProEdge Hip & Ridge Shingles shall comply with the Owens Corning current published instructions,
using four (4) nails per shingle. Installation of DuraRidge'" Hip & Ridge Shingles shall comply with the
Owens Corning current published instructions, using two (2) nails per shingle. Refer to Owens Corning
published information on wind resistance and installation limitations, including the use of hand -sealing for
wind warranties.
6.3.2 Fasteners shall be in accordance with the manufacturer's published requirements, but not less than FBC
1507.2.6 or R905.2.5. Staples are not permitted.
6.3.3 Minimum Nailing— Berkshire® Hip & Ridge and High Ridge:
Fig. 1 Q
PievalanglMnd
Direction A
Nall s—`i
A
Q
I I
A I I
A I
I IQII
I I I I
A I I I I
a -- Exposure
Fig. 2
TopM w 9daMew
Naps Nails
l T Top Laminated
r
a- Piece
1' t'
I
ggISII1
a'
i
II11
6.3.4 Minimum Nailing — WeatherGuard® HP Hip and Ridge:
Fig. C Hip & Ridge Shingle Fastening
Topvlaw
Nails Nails
r
r' r"
r 1.
6 EIPMM
Iw— 1r
Exterior Research and Design, I.I.C. Evaluation Report 037940.02.12-R8
Certificate of Authorization #9503 6' EDITION 12017) FBC NON-HVHZ EVALUATION FL10674-1113
Owens Corning Asphalt Roof Shingles Revision 8: 10/09/2017
Page 7 of 8
6.3.5 Minimum Nailing - ProEdge Hip & Ridge Shingles:
Prevailing
Wind Direction Sealant Strip
6" Exposure J
Fasten 711,"
Cover Exposed
Fasteners with
Roof Cement
0
I TRINITY1 ERD
Standard ,_•
Fastoning
Pattern
r
r- 1•;r _l , I.1°
12° 1 Sealant
71h 6" Exposure
6.3.6 Minimum Nailing — DuraRidgeT" Hip & Ridge Shingles:
Note: The drawings below pertain to minimum, as -tested attachment requirements. Refer to Owens Corning
published installation instructions for their minimum requirements.
Top ViewWeonplan
I^ Vlsn superior I' H
NA
1 Cl-
ovma nscoiningSUMN81' Co. 8
d
I
uI
12"
7.
LABELING: 7.
1 Labeling shall be in accordance with the requirements the Accredited Quality Assurance Agency noted herein.
7.
2 Asphalt shingle wrappers shall indicate compliance with one of the required classifications detailed in FBC Table
1507.2.7.1 / R905.2.6.1. 8.
BUILDING PERMIT REQUIREMENTS: As
required by the Building Official or Authority Having Jurisdiction in order to properly evaluate the installation of this
product. 9.
MANUFACTURING PLANTS: Contact
the named QA entity for information on which plants produce products covered by Florida Rule 9N-3 QA requirements.
10.
QUALITY ASSURANCE ENTITY: UL
LLC— QUA9625 ; (631) 546-2458; Kanchi.Agrawala-Dokania@ul.com END
OF EVALUATION REPORT - Exterior
Research and Design, U.C. Evaluation Report 037940.02.12-R8 Certificate
of Authorization #9503 6' EDITION (2017) FBC NON-HVHZ EVALUATION F1.10674-1113 Owens
Corning Asphalt Roof Shingles Revision 8: 10/09/2017 Page
8 of 8
y
BCIS Home li Log In User Registration Hot Topics 1 Submit Surcharge t Stats & Facts j Publications ; FBC Staff SCIS Site Map Links f search
Product Approval
USER: Public User
Product Approval Menu > Product or Application Search > Application List > Application Detail
FL # FL17420-R4
Application Type Revision
Code Version 2017
Application Status Approved
Comments
Archived
Product Manufacturer
Address/Phone/Email
Authorized Signature
Technical Representative
Address/Phone/Email
Quality Assurance Representative
Address/Phone/Email
Owens Corning
One Owens Corning Parkway
Toledo, OH 43659
740)404-7829
greg.keeler@owenscorning.com
Greg Keeler
greg.keeler@owenscorning.com
Category Roofing
Subcategory Underlayments
Compliance Method Evaluation Report from a Florida Registered Architect or a Licensed
Florida Professional Engineer
0 Evaluation Report - Hardcopy Received
Florida Engineer or Architect Name who developed Zachary R. Priest
the Evaluation Report
Florida License PE-74021
Quality Assurance Entity Intertek Testing Services NA, Inc. - QA Entity
Quality Assurance Contract Expiration Date 12/31/2020
Validated By Locke Bowden
D Validation Checklist - Hardcopy Received
Certificate of Independence FL17420 R4 COI OCR14004 4 2017 FBC Eval Report ProArmor final odf
Referenced Standard and Year (of Standard)
Equivalence of Product Standards
Certified By
Sections from the Code
1507.1.1
Product Approval Method Method 2 Option B
Date Submitted 09/30/2017
Date Validated 10/03/2017
Date Pending FBC Approval 10/04/2017
Date Approved 12/12/2017
Summary of Products
FL # Mod1.Number or Name Description 17420.
1 ProArmor Synthetic underlayment for use with asphalt shingles in steep
slope roofing Limits
of Use Installation Instructions Approved
for use in HVHZ: No FL17420 R4 II OCR14004.4 2017 FBC Eval Report ProArmor
final.odf ApprovedforuseoutsideHVHZ: Yes Impact
Resistant: N/A Verified By: Zachary R. Priest 74021 Design
Pressure: N/A Created by Independent Third Party: Yes Other:
See evaluation report for limits of use. Evaluation Reports FL17420
R4 AE OCR14004.4 2017 FBC Eval Report ProArmor
final.pdf Created
by Independent Third Party: Yes Back
Next Contact
Us :: 2601 Blair Stone Road. Tallahassee FL 32399 Phone: 850-487-1824 The
State of Florida Is an WEED employer. Copyright 2007-2013 State of Florida.:: Privacy Statement :: Accessibility Statement :: Refund Statement Under
Florida law, email addresses are public records. If you do not want your e-mail address released In response to a public -records request, do not send electronic mail
to this entity. Instead, contact the office by phone or by traditional mall. If you have any questions, please contact 850.487.1395. -Pursuant to Section 455.275 1),
Florida Statutes, effective October 1, 2012, licensees licensed under Chapter 455, F.S. must provide the Department with an email address If they have one. The emails
provided may be used for official communication with the licensee. However email addresses are public record. If you do not wish to supply a personal address, please
provide the Department with an email address which can be made available to the public. To determine if you are a licensee under Chapter 455, F.S., please clickhere . Product
Approval Accepts: NN
Certificate of Authorization No. 29824
CREEK17520 Edinburgh Drive
Tampa, FL 33647
TECHNICAL SERVICES, LLC (813) 480-3421
EVALUATION REPORT FLORIDA BUILDING CODE 6T" EDITION (2017)
Manufacturer: OWENS CORNING ROOFING AND ASPHALT LLC Issued September30, 2017
1 Owens Corning Parkway
Toledo, OH 43657
800)438-7465
www.owenscorning.com
Quality Assurance: Intertek Testing Services NA, Inc. (QUA1673)
SCOPE
Category: Roofing
Subcategory: Underlayments
Code Sections: 1507.1.1
Properties: Physical properties
REFERENCES
Entity Report No. Standard Year
Intertek Testing Services NA Ltd. (TST1509) 102389161COQ-002A AC 188 2012
Intertek Testing Services NA Ltd. (TST1509) 102389161 COQ-003b ASTM E 108 2011
Intertek Testing Services NA Ltd. (TST1509) 102389161COQ-004 ASTM D 226 2009
PRI Construction Materials Technologies (TST5878) OCR-259-02-01 ASTM D 1970 2015a
PRODUCT DESCRIPTION AND APPLICATION
ProArmor1°° A mechanically attached, synthetic underlayment consisting of a woven polypropylene
base with a non -woven polypropylene laminate on the topside of the underlayment, and
a coating on the back side (nominal weight = 2.15 Ib/1002). The underlayment shall be
used an alternative to ASTM D 226, Type II roofing underlayments and has
demonstrated a minimum tear strength of 20 pounds when tested in accordance with
ASTM D 1970. The product is supplied in 9.2-sq rolls with nominal dimensions of 4-ft x
250.5-ft. Unless otherwise noted, the following application details shall be followed for
New and Existing construction. See manufacturer's installation instructions for further
detail.
Roof Deck: The roof deck shall be constructed of closely fitted
wood sheathing for new or existing construction.
Plywood deck shall be installed in accordance with
FBC requirements. Roof decks shall have no more
than'/8" gap at abutting joints.
Attachment method: Underlayment shall be attached in accordance with
the FBC Table 1507.1.1 and manufacturer's
installation instructions.
Allowable roof coverings: Mechanically attached roof systems as prescribed in
FBC Section 1507.1.1.
OCR14004.4 FL17420-R4 Page 1 of 2
This evaluation report is provided for State of Florida product approval under Rule 61 G20-3. The manufacturer shall notify CREEK
Technical Services, LLC of any product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express nor imply warranty, installation, recommended use, or other product attributes that are not
specifically addressed herein.
CREEK
TECHNICAL SERVICES, LLC
LIMITATIONS
OWENS CORNING ROOFING AND ASPHALT LLC
ProArmorTPA
1) This evaluation report is not for use in the HVHZ.
2) Fire Classification is not within the scope of this evaluation.
3) Wind uplift resistance in not within scope of this evaluation.
4) Installation of the evaluated product shall comply with this report, the FBC, and the manufacturer's published
application instructions. Where discrepancies exist between these sources, the more restrictive and FBC
compliant installation detail shall prevail.
5) Deck substrates shall be clean, dry, and free from any irregularities and debris. All fasteners in the deck
shall be checked for protrusion and corrected prior to underlayment application.
6) Roof slope limitations, shall be in accordance with FBC requirements.
7) The underlayment may be used as described in other current FBC product approval documents.
8) Roof coverings shall not be adhered directly to the underlayment. Roof coverings shall be mechanically
fastened through the underlayment to the roof deck.
9) The underlayment shall not be installed over existing roof coverings.
10) All underlayments shall be installed with the roll length parallel to the eave, starting at the eave, and lapped
in success courses installed up the deck in a manner that effectively sheds water from the deck. End laps
shall be staggered between courses in accordance with the manufacturer's application instructions.
11) The underlayment shall not be exposed on the roof deck for longer than 30 days.
12) All products listed in this report shall be manufactured under a quality assurance program in compliance with
Rule 61 G20-3.
COMPLIANCE STATEMENT
The products evaluated herein by Zachary R. Priest, P.E. have demonstrated compliance with the Florida Building
Code 6th Edition (2017) as evidenced in the referenced documents submitted by the named manufacturer.
G PFtY R
F
No 74021
3 STATE OF :U
0 N Ae 00'
CERTIFICATION OF INDEPENDENCE
2017.09.30
15:21:14
04t00t
Zachary R. Priest, P.E.
Florida Registration No. 74021
Organization No. ANE9641
CREEK Technical Services, LLC does not have, nor will it acquire, a financial interest in any company manufacturing or distributing
products under this evaluation.
CREEK Technical Services, LLC is not owned, operated, or controlled by any company manufacturing or distributing products under
this evaluation.
Zachary R. Priest, P.E. does not have, nor will acquire, a financial interest in any company manufacturing or distributing products
under this evaluation.
Zachary R. Priest, P.E. does not have, nor will acquire, a financial interest in any other entity involved in the approval process of the
product.
END OF REPORT
OCR14004.4 FL17420-R4 Page 2 of 2
This evaluation report is provided for State of Florida product approval under Rule 61 G20-3. The manufacturer shall notify CREEK
Technical Services, LLC of any product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express nor imply warranty, installation, recommended use, or other product attributes that are not
specifically addressed herein.
laue.•0iee at
BCIS Home Log In i User Registration t Hot Topics j Submit Surcharge Stats & Facts i Publications FBC Staff BCIS Site Map f Links I Search i
dbprda c` emsr; Product Approval
Y' 5 USER: Public User
00 rat Product Approval Menu > Proeucc or Application Search > Aoelication List > Application Detail
FL #
Application Type
Code Version
Application Status
Comments
Archived
Product Manufacturer
Address/Phone/Email
Authorized Signature
Technical Representative
Address/Phone/Email
Quality Assurance Representative
Address/Phone/Email
Category
Subcategory
Compliance Method
Florida Engineer or Architect Name who developed
the Evaluation Report
Florida License
Quality Assurance Entity
Quality Assurance Contract Expiration Date
Validated By
Certificate of Independence
FL9777-R11
Revision
2017
Approved
Owens Corning
One Owens Corning Parkway
Toledo, OH 43659
740)404-7829
greg,keeler@owenscorning.com
Greg Keeler
greg.keeler@owenscorning.com
Roofing
Underlayments
Evaluation Report from a Florida Registered Architect or a Licensed
Florida Professional Engineer
Evaluation Report - Hardcopy Received
Zachary R. Priest
PE-74021
UL LLC
12/31/2020
Locke Bowden
Validation Checklist - Hardcopy Received
Referenced Standard and Year (of Standard) Standard
ASTM D 1970
ASTM D 226
ASTM G 155
TAS 103
UL 1897
Equivalence of Product Standards
Certified By
Sections from the Code
Year
2015
2009
2005
1995
2012
Product Approval Method Method 1 Option D
Date Submitted 10/11/2017
Date Validated 10/11/2017
Date Pending FBC Approval 10/17/2017
Date Approved 12/12/2017
Summary of Products
FL # Model, Number or Name Description
9777.1 Weatherlock G Weatherproofing Underlayment
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Design Pressure: N/A
Other: See evaluation report for limits of use.
Installation Instructions
FL9777 1111 II OCR14002 8a 2017 FBC Evaluation Reoort
Weatherlock Non-HVHZ.odf
Verified By: Zachary R. Priest 74021
Created by Independent Third Party: Yes
Evaluation Reports
FL9777 R11 AE OCR14002 8a 2017 FBC Evaluation Report
Weatherlock Non-HVHZ Ddf
Created by Independent Third Party: Yes
9777.2 Weatherlock G (High Tear) Weatherproofing Underlayment
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL9777 RI1 II OCR14002 8a 2017 FBC Evaluation Report
Weatherlock Non-HVHZ.odf
Verified By: Zachary R. Priest PE-74021
Created by Independent Third Party: Yes
Evaluation Reports
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Design Pressure: N/A
Other: See evaluation report for limits of use.
FL9777 Rt t AE OCR 4nn2 as 2017 FBC Evaluation Report
Weatherlock Non-HVHZ.odf
Created by Independent Third Party: Yes
97773 Weatherlock MAT Waterproofing Underlayment
Limits of Use
Approved for use in HVHZ: Yes
Installation Instructions
FL9777 R11 II OCRI4002 8b 2017 FBC Evaluation Report
Weatherlock HVHZ.Ddf
Verified By: Zachary R. Priest 74021
Approved for use outside HVHZ: No
Impact Resistant: N/A
Design Pressure: N/A Created by Independent Third Party: Yes
Other: See evaluation report for limits of use. Evaluation Reports
FL9777 R11 AE OCR14002 8b 2017 FBC Evaluation Reoort
Weatherlock HVHZ.pdf
Created by Independent Third Party: Yes
19777.4 1 Weatherlock MAT I Waterproofing Underlayment I
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Design Pressure: N/A
Other: See evaluation report for limits of use.
Installation Instructions
FL9777 R11 II OCR14002.8a 2017 FBC Evaluation Report
Weatherlock Non-HVHZ.odf
Verified By: Zachary R. Priest 74021
Created by Independent Third Party: Yes
Evaluation Reports
FL9777 R11 AE OCR14002 8a 2017 FBC Evaluation Report
Weatherlock Non-HVHZ.Ddf
Created by Independent Third Party: Yes
19777.5 1 Weatherlock Metal I Weatherproofing Underlayment'
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Design Pressure: N/A
Other: See evaluation report for limits of use
Installation Instructions
FL9777 R11 II OCR14002 8a 2017 FBC Evaluation Report
Weatherlock Non-HVHZ.odf
Verified By: Zachary R. Priest PE-74021
Created by Independent Third Party: Yes
Evaluation Reports
FL9777 R11 AE OCR14002.6a 2017 FBC EvaluationReoort
Weatherlock Non-HVHZ.pdf
Created by Independent Third Party: Yes
19777.6 1 Weatherlock Metal I Weatherproofing Underlayment
Limits of Use
Approved for use in HVHZ: Yes
Approved for use outside HVHZ: No
Impact Resistant: N/A
Design Pressure: N/A
Other: See evaluation report for limits of use.
Installation Instructions
FL9777 1111 II OCR14002.8b 2017 FBC Evaluation Report
Weatherlock HVHZ.odf
Verified By: Zachary R. Priest PE-74021
Created by Independent Third Party: Yes
Evaluation Reports
FL9777 R11 AE OCR14002.8b 2017 FBC Evaluation Re oorrt
Weatherlock HVHZ.odf
Created by Independent Third Party: Yes
9777.7 Weatherlock Specialty Tile & Metal Weatherproofing Underlayment
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL9777 R11 II OCRi4002,8a 2017 FBC Evaluation Report
Approved for use outside HVHZ: Yes Weatherlock Non-HVHZ,odf
Impact Resistant: N/A Verified By: Zachary R. Priest 74021
Design Pressure: +0/-142.5 Created by Independent Third Party: Yes
Other: See evaluation report for limits of use. Evaluation Reports
FL9777 R11 AE OCR14002 8a 2017 FBC Evaluation Report
Weatherlock Non-HVHZ.odf
Created by Independent Third Party: Yes
Back Next
Contact Us :: 2601 Blair Stone Road, Tallahassee FL 32399 Phone: 850-487.1824
The State of Florida is an AA/EEO employer. Copyright 2007.2013 State of Florida.:: Privacy Statement :: Accessibility Statement :: Refund Statement
Under Florida law, email addresses are public records, if you do not want your e-mail address released in response to a public -records request, do not send electronic
mail to this entity. Instead, contact the office by phone or by traditional mail. If you have any questions, please contact 850.487.1395. 'Pursuant to Section 455.2751), Florida Statutes, effective October 1, 2012, licensees licensed under Chapter 455, F.S. must provide the Department with an email address if they have one. The
emalis provided may be used for official communication with the licensee. However email addresses are public record. If you do not wish to supply a personal address, please provide the Department with an email address which can be made available to the public. To determine if you are a licensee under Chapter 455, F.S., please
click hem.
Product Approval Accepts:
du'iC
Credit Card
Safe
srcurta•`r+titraucsv`
jr, 41 lr
0"Z14-:4P 69116
TECHNICAL SERVICES, LLC
EVALUATION REPORT
Certificate of Authorization No. 29824
17520 Edinburgh Drive
Tampa, FL 33647
813) 480-3421
FLORIDA BUILDING CODE, 6TH EDITION (2017)
Manufacturer: OWENS CORNING ROOFING AND ASPHALT LLC
1 Owens Corning Parkway
Toledo, OH 43657
800) 438-7465
www.owenscorning.com
Manufacturing Location: Brentwood, NH
Houston, TX
Quality Assurance: UL LLC (QUA9625)
SCOPE
Category: Roofing
Subcategory: Underlayments
Code Sections: 1504.3.1, 1507.1.1
Properties: Physical properties
REFERENCES
Entity
PRI Construction Materials Technologies (TST5878)
PRI Construction Materials Technologies (TST5878)
PRI Construction Materials Technologies (TST5878)
PRI Construction Materials Technologies (TST5878)
PRI Construction Materials Technologies (TST5878)
PRI Construction Materials Technologies (TST5878)
PRI Construction Materials Technologies (TST5878)
PRI Construction Materials Technologies (TST5878)
PRI Construction Materials Technologies (TST5878)
PRI Construction Materials Technologies (TST5878)
PRI Construction Materials Technologies (TST5878)
PRI Construction Materials Technologies (TST5878)
PRI Construction Materials Technologies (TST5878)
PRI Construction Materials Technologies (TST5878)
Report No.
N EI.039-02-01
NEI-042-02-01 REV2
NEI-045-02-01
NEI-045-02-01
NEI-053-02-01
NEI-053-02-01
NEI-093-02-02
OCF-213-02-01
OCF-237-02-01
OCF-252-02-01
OCF-252-02-01
OCF-253-02-02
OCF-272-02-01
OCF-296-02-02
PRI Construction Materials Technologies (TST5878) OCF-297-02-01.1
PRI Construction Materials Technologies (TST5878) OCF-318-02-01
PRI Construction Materials Technologies (TST5878) OCF-320-02-01
PRI Construction Materials Technologies (TST5878) OCF-320-02-01
PRI Construction Materials Technologies (TST5878) OCF-321-02-01
PRI Construction Materials Technologies (TST5878) OCF-322-02-01
PRI Construction Materials Technologies (TST5878) OCF-355-02-01
Determined to be equivalent to ASTM D 226-09, Type I and II
Issued October 11, 2017
Standard
ASTM D 1970
ASTM D 1970
TAS 103
ASTM G 155
TAS 103
ASTM G 155
ASTM D 1970
ASTM D 1623
UL 1897
ASTM D 4798
ASTM D 1970
ASTM D 1970
TAS 103
ICC-ES AC 188'
ICC-ES AC 48
ASTM D 1970
ASTM D 1970
TAS 103
ASTM G 155
ASTM D 1623
UL 1897
UL 1897
Year
2015
2015
1995
2005a
1995
2005a
2015
2009
2012
2001
2015
2015
1995
2012
2012
2015
2015
1995
2005a
2009
2012
2012
OCR14002.8a FL9777-R11 Page 1 of 4
This evaluation report is provided for State of Florida product approval under Rule 61G20-3. The manufacturer shall notify CREEK
Technical Services, LLC of any product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express nor imply warranty, installation, recommended use, or other product attributes that are not
specifically addressed herein,
CRift...EK
TECHNICAL SERVICES, LLC
PRODUCT DESCRIPTION AND LIMITS OF USE
OWENS CORNING ROOFING AND ASPHALT LLC
WeatherLock@ Self -Sealing Ice & Water Barriers
WeatherLock@ G WeatherLock@ G is an ASTM D 1970 self-adhesive underlayment constructed from SIBS
Brentwood, NH) modified asphalt, a fiberglass mat reinforcement and surfaced with granules. The
product is supplied in 2-sq. rolls with nominal dimensions of 3-ft x 66.7-ft.
WeatherLock@ G is permitted to be used as prescribed in FBC Section 1507.1.1 for
mechanically attached roofing coverings. Exposure on the roof deck shall be limited to a
maximum 30 days.
WeatherLock@ Mat WeatherLock@ Mat is an ASTM D 1970 self-adhesive underlayment constructed from
Brentwood, NH or SIBS modified asphalt with a fiberglass mat reinforcement. The product is supplied in 1-
Houston, TX) sq. rolls with nominal dimensions of 3-ft x 33.3-ft and 2 sq. rolls with nominal dimensions
of 3-ft x 66.7-ft.
WeatherLock@ Mat is permitted to be used as prescribed in FBC Section 1507.1.1 for
mechanically attached roof coverings. Exposure on the roof deck shall be limited to a
maximum 30 days.
WeatherLock@ Metal WeatherLock@ Metal is an ASTM D 1970 self-adhesive underlayment constructed from
Brentwood, NH) SBS modified asphalt with a fiberglass mat reinforcement and plastic film surface. The
product is supplied in 2.0 sq. rolls with nominal dimensions of 3-ft x 66.7-ft.
WeatherLock® Metal is permitted to be used as prescribed in FBC Section 1507.1.1 for
mechanically attached roof coverings. Exposure on the roof deck shall be limited to a
maximum 90 days.
WeatherLock@ WeatherLock@ Specialty Tile & Metal is an ASTM D 1970 self-adhesive underlayment
Specialty Tile & Metal constructed from SBS modified asphalt and surfaced with a non -woven polyester fabric.
Brentwood, NH or The product is supplied in 2.14 sq. rolls with nominal dimensions of 3-ft x 71.3-ft.
Houston, TX)
WeatherLock® Specialty Tile & Metal is permitted to be used as prescribed in FBC
Section 1507.1.1. WeatherLock@ Specialty Tile & Metal is permitted to be used with
adhered clay or concrete tile roofing using either ICP Adhesives Polyset AH-160 (ICP
Adhesives and Sealants, Inc.) or TILE BONDTm Roof Tile Adhesive (The Dow Chemical
Company). Exposure on the roof deck shall be limited to a maximum 90 days.
The maximum roof slope shall be 6:12 when used with clay or concrete tile installations
without battens. Tile shall be stored on battens for roof slopes greater than 6:12. Tiles
shall not be stacked greater 10 tiles per stack.
WeatherLock@ G (High WeatherLock@ G (High Tear) is a self -adhered, underlayment used as an alternative to
Tear) ASTM D 226, Type I or Type II roofing felt and ASTM D 1970 self -adhering polymer
Houston, TX) modified bitumen underlayment. The underlayment is composed of SBS modified
asphalt with a fiberglass mat internal reinforcement and is surfaced with granules. The
product is supplied with a nominal thickness of 50 mils in 1.95-sq rolls with nominal
dimensions of 3-ft x 65-ft.
WeatherLock@ G (High Tear) is permitted to be used as prescribed in FBC Section
1507.1.1 for mechanically attached roof coverings. Exposure on the roof deck shall be
limited to a maximum 30 days.
OCR14002.8a FL9777-R11 Page 2 of 4
This evaluation report is provided for State of Florida product approval under Rule 61G20-3. The manufacturer shall notify CREEK
Technical Services, LLC of any product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express nor imply warranty, installation, recommended use, or other product attributes that are not
specifically addressed herein.
CREED{
TECHNICAL SERVICES, LLC
PRODUCT APPLICATION
OWENS CORNING ROOFING AND ASPHALT LLC
WeatherLock® Self -Sealing ice & Water Barriers
Min. Roof Slope: 2:12 in accordance with the FBC
Application: All underlayments shall be installed in accordance with the FBC.
Deck substrates shall be clean, dry, and free from any irregularities and debris. All
fasteners in the deck shall be checked for protrusion and corrected prior to underlayment
application. Prior to beginning installation, the underlayment shall be unrolled and
allowed to relax for a minimum of 3-5 minutes.
The underlayment shall be installed with the release backer removed and pressed firmly
into place to ensure complete contact with the deck. The underlayment shall be installed
with the roll length parallel to the eave, starting at the eave, and with minimum 3" side
laps and minimum 6" end laps staggered min. 6-ft.from preceding course. Additionally, if
applying WeatherLock® Specialty Tile & Metal, end laps shall be primed with ASTM D
41 primer or sealed with asphalt roof cement a minimum of 3-4 inches across the width
of the lap.
It is permissible to back nail the underlayment 12-inches on -center as needed (nails shall
be installed perpendicular to deck with the nail heads flush to the top surface of the
underlayment). Additionally, WeatherLock® Specialty Tile & Metal shall be back nailed
when installed on roof slopes greater than 3:12.
Min. Application 40°F; Contact the manufacturer when installing at temperatures below the minimum
Temperature: application temperature.
WIND RESISTANCE
The Maximum Design Pressures shown below were calculated using a 2:1 margin of safety per FBC Section 1504.9
Underlavment Svstem No.1 — WeatherLock Specialty Tile & Metal Only
Roof Deck: Min. 15/32-inch CDX plywood attached to wood supports spaced a maximum 24" o.c.
Underlayment: WeatherLock® Specialty Tile & Metal shall be applied in accordance with
manufacturer's installation instructions to the fastened deck and backnailed along the
selvage with minimum 12ga., 1-1/4-inch galvanized ring shank roofing nails through
optionally primed, 32ga. x 1-5/8-inch fd tin caps spaced 12" o.c. The applied
underlayment shall be rolled with a minimum 751b steel roller immediately following
application.
Maximum Design -142.5 psf
Pressure:
OCR14002.8a FL9777-Rl l Page 3 of 4
This evaluation report is provided for State of Florida product approval under Rule 61 G20-3. The manufacturer shall notify CREEK
Technical Services, LLC of any product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express nor imply warranty, installation, recommended use, or other product attributes that are not
specifically addressed herein.
CREEK
TECHNICAL SERVICES, LLC
GENERAL LIMITATIONS
OWENS CORNING ROOFING AND ASPHALT LLC
WeatherLock® Self -Sealing ice & Water Barriers
1) This evaluation report is not use in the HVHZ.
2) Fire Classification is not within the scope of this evaluation.
3) Installation of the evaluated product shall comply with this report, the FBC, and the manufacturer's published
application instructions. Where discrepancies exist between these sources, the more restrictive and FBC
compliant installation detail shall prevail.
4) The roof deck shall be constructed of closely fitted plywood sheathing for new or existing construction.
5) The space under the deck area shall be properly ventilated in accordance with the FBC requirements.
6) All side lap seams shall be installed to shed water from the deck.
7) The underiayment may be used as described in other current FBC product approval documents.
8) Design wind load pressures shall be determined for components and cladding in accordance with FBC
1609.
9) The roof deck shall be designed by others in accordance with FBC requirements to resist the design wind
load pressures for components and cladding.
10) Maximum Design Pressures for a given underiayment shall meet or exceed the design wind loads
determined for the roof assembly.
11) All products listed in this report shall be manufactured under a quality assurance program in compliance with
Rule 61 G20-3.
COMPLIANCE STATEMENT
The products evaluated herein by Zachary R. Priest, P.E. have demonstrated compliance with the Florida Building
Code 61' Edition (2017) as evidenced in the referenced documents submitted by the named manufacturer.
J 1111111l/,I
QG•\,\CE.NS•FS
No 74021
STATE OF
v
O R \..
CERTIFICATION OF INDEPENDENCE
2017.10.
09:06:29
04'00'
Zachary R. Priest, P.E.
Florida Registration No. 74021
Organization No. ANE9641
CREEK Technical Services, LLC does not have, nor will it acquire, a financial interest in any company manufacturing or distributing
products under this evaluation.
CREEK Technical Services, LLC is not owned, operated, or controlled by any company manufacturing or distributing products under
this evaluation.
Zachary R. Priest, P.E. does not have, nor will acquire, a financial interest in any company manufacturing or distributing products
under this evaluation.
Zachary R. Priest, P.E. does not have, nor will acquire, a financial interest in any other entity involved in the approval process of the
product.
END OF REPORT
OCR14002.8a FL9777-R11 Page 4 of 4
This evaluation report is provided for State of Florida product approval under Rule 61 G20-3. The manufacturer shall notify CREEK
Technical Services, LLC of any product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express nor imply warranty, installation, recommended use, or other product attributes that are not
specifically addressed herein.
4/17/2018 Florida Building Code Online
BCIS Home Log In User Registration Hot Topics Submit Surcharge Stats & Facts ( Publications FBC Staff BCIS Site Map Links Search
bW'
da
Product Approval
USER: Public User
Product Aooroval Menu > Product or ARglication Search > 82Ql atlon Lfst > Application Detail
FL # FL10758-R7
Application Type Revision
Code Version 2017
Application Status Approved
Comments
Archived
Product Manufacturer Owens Corning
Address/Phone/Email One Owens Corning Parkway
Toledo, OH 43659
740)404-7829
greg.keeler@owenscorning.com
Authorized Signature Greg Keeler
greg.keeler@owenscorning.com
Technical Representative Greg Keeler
Address/Phone/Email 2790 Columbus Road
Granville, OH 43023
740)321-634S
greg.keeler@owenscorning.com
Quality Assurance Representative
Address/Phone/Email
Category Roofing
Subcategory Roofing Accessories that are an Integral Part of the Roofing System
Compliance Method Evaluation Report from a Florida Registered Architect or a Licensed Florida
Professional Engineer
Evaluation Report - Hardcopy Received
Florida Engineer or Architect Name who developed Zachary R. Priest
the Evaluation Report
Florida License PE-74021
Quality Assurance Entity UL LLC
Quality Assurance Contract Expiration Date 10/13/2020
Validated By Locke Bowden P.E.
Validation Checklist - Hardcopy Received
Certificate of Independence FL10758 R7 COI OCR14003 3 2017 FBC Evaluation Report Owens
Corning Vents final.pdj
Referenced Standard and Year (of Standard)
Equivalence of Product Standards
Certified By
Sections from the Code
1708.2
https://www.floridabuilding.org/pr/pr_app_dti.aspx?param=wGEVXQwtDgvldAviteOY0%2bC3zFtrydg9NkhwZWZzJrupAl5CIMPWHQ°/a3d°/a3d 1.
4/17/2018 Florida Building Code Online
Product Approval Method ' Method 2 Option B
Date Submitted 09/30/2017
Date Validated 10/04/2017
Date Pending FBC Approval 10/08/2017
Date Approved 12/12/2017
Summary of Products
FL # Model, Number or Name Description
10758.1 VentSure 4-foot Strip Heat and Copolymer plastic low profile attic ridge vents for installation in
Moisture Ridge Vents shingle roof systems
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL10758 R7 II OCR14003.3 2017 FBC Evaluation Repo
Owens Corning Vents final,pdfApprovedforuseoutsideHVHZ: Yes
Impact Resistant: N/A Verified By: Zachary R. Priest 74021
Design Pressure: N/A Created by Independent Third Party: Yes
Other: Refer to evaluation report Evaluation Reports
FL10758 R7 AE OCR14003.3 2017 FBC Evaluation Repo
Owens Corning Vents flnal.Ddf
Created by Independent Third Party: Yes
10758.2 VentSure Low Profile Slant Back Roof Galvanized metal roof vent
Vent With Exterior Louver
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL10758 R7 II OCR14003.3 2017 FBC Evaluation Repo#
Approved for use outside HVHZ: Yes Owens Corning Vents final.pd
Impact Resistant: N/A Verified By: Zachary R. Priest 74021
Design Pressure: N/A Created by Independent Third Party: Yes
Other: Refer to evaluation report. Evaluation Reports
FL10758 R7 AE OCR14003.3 2017 FBC Evaluation Repo
Owens Corning Vents final.(df
Created by Independent Third Party: Yes
10758.3 VentSure Rigid Roll Ridge Vent Ridge Ventilation System
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL10758 R7 II OCR14003.3 2017 FBC Evaluation Repo#
Owens Corning Vents Pnal.pdApprovedforuseoutsideHVHZ: Yes
Impact Resistant: N/A Verified By: Zachary R. Priest 74021
Design Pressure: N/A Created by Independent Third Party: Yes
Other: Refer to evaluation report. Evaluation Reports
FL10758 R7 AE OCR14003.3 2017 FBC Evaluation Report
Owens Coming Vents final.pdf
Created by Independent Third Party: Yes
Back Next
Contact Us :: 2601 Blair Stone Road Tallahassee FL 32399 Phone: 850-487-1824
The State of Florida is an AA/EEO employer. C=yjight 2007-2013 State of Florida.:: Privacy Statement :: Accessibility Statement :: Refund Statement
Under Florida law, email addresses are public records. If you do not want your e-mail address released In response to a public -records request, do not send electronic
mail to this entity. Instead, contact the office by phone or by traditional mall. If you have any questions, please contact 850.487.1395. 'Pursuant to Section
455.275(1), Florida Statutes, effective October 1, 2012, licensees licensed under Chapter 455, F.S. must provide the Department with an email address if they have
one. The emalls provided may be used for official communication with the licensee. However email addresses are public record. If you do not wish to supply a personal
address, please provide the Department with an email address which can be made available to the public. To determine If you are a licensee under Chapter 455, F.S.,
please dick here .
Product Approval Accepts:
IM ® RE Em
Credit Card
Safe
https://www.floridabuilding.org/pr/pr_app_dU.aspx?param=wGEVXQwtDgvl dAviteOYO%2bC3zFtrydg9NkhwZWZzJrupA15CIMPWHQ%3d%3d 2,
Certificate ofAuthorization No. 29824REEK17520EdinburghDr
Tampa, FL 33647
TECHNICAL SERVICES. LLC (813) 480-3421
EVALUATION REPORT FLORIDA BUILDING CODE, 6T" EDITION (2017)
Manufacturer: OWENS CORNING ROOFING AND ASPHALT LLC Issued September30, 2017
1 Owens Corning Parkway
Toledo, OH 43657
800)438-7465
www.owenscorning.com
Quality Assurance: UL LLC (QUA9625)
SCOPE
Category: Roofing
Subcategory: Roofing Accessories that are an Integral Part of the Roofing System
Code Sections: 1708.2
Properties: Roof Ventilation
REFERENCES
Entity Report No. Standard Year
Architectural Testing, Inc (TST1558) 01-38660.04 TAS 100(A) 1995
Architectural Testing, Inc (TST1558) 01-38660.05 TAS 100(A) 1995
Architectural Testing, Inc (TST1558) C1774.01-109-18 TAS 100(A) 1995
ASTM D 635 2010
ASTM D 1929 2012
ASTM D 2843 2010
PRI Construction Materials Technologies (TST5878) AVIG-005-02-01 ASTM D 635 2010
ASTM D 1929 2012
ASTM D 2843 2010
PRI Construction Materials Technologies (TST5878) AVIG-006-02-01 ASTM G 155 2005a
PRI Construction Materials Technologies (TST5878) OCF-111-02-01 ASTM D 635 2010
ASTM D 1929 2012
ASTM D 2843 2010
PRI Construction Materials Technologies (TST5878) OCF-112-02-01 ASTM G 155 2005a
PRI Construction Materials Technologies (TST5878) OCF-116-02-01 TAS 100(A) 1995
PRI Construction Materials Technologies (TST5878) OCF-223-02-01 TAS 100(A) 1995
PRI Construction Materials Technologies (TST5878) OHI-007-02-01 TAS 100(A) 1995
OCR14003.3 FL10758-R7 Page 1 of 5
This evaluation report is provided for State of Florida product approval under Rule 61G20-3. The manufacturer shall notify CREEK
Technical Services, LLC of any product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express nor imply warranty, installation, recommended use, or other product attributes that are not
specifically addressed herein.
OWENS CORNING ROOFING AND ASPHALT LLCCREEKVentSure® Roof Ventilation
TECHNICAL SERVICES, LLC
PRODUCT DESCRIPTION AND APPLICATION
VentSureo 4-Foot Strip 1-1/4" x 14-7/8" x 48" low -profile attic ridge vent consisting of a two -layer nylon -
Heat and Moisture Ridge polyester composite. Available with _or without a polyester fabric moisture barrier for
Vents: installation in shingle roof systems.
48"
Deck Type: Roof deck shall be constructed of closely fitted sheathing for new or existing
construction. Roof deck shall be designed and installed in accordance with FBC
requirements.
Roof slope: Minimum 3:12 to maximum 16/12
Installation Height: Maximum 60-ft
Attachment Method: Cut a 2-inch opening (11-inch on each side of the ridge) centered in the deck at the
ridge for ventilation. The slot shall terminate approximately 6-inches from the rake
edges. Apply a 1/4-inch wide bead of ASTM D 4586 roofing cement along the entire
length of the outside edges of the vent to seal the vent to the field shingles, taking
care to not completely cover the weep slots in the vent. Center the vent over the
opening and fasten to the deck using the 11 ga. 2'/z-inch galvanized ring shank nails
shall comply with FBC Section 1506.5) provided with the vent. Fasteners are to be
installed on both sides of the vent 1, 12, 24, 36, and 47-inches from the start of each
vent piece.
Prepare the adjacent vent section by applying the roofing cement along the edges,
snap together with fixed vent, and fasten to the deck in the same manner as the first
section. Fasten the ridge shingles over the vent to the deck on the marked "shingle
nail line" with two (2) minimum 11 ga. 2'/cinch galvanized ring shank roofing nails
shall comply with FBC Section 1506.5) provided with the vent or as directed by the
shingle manufacturer's installation instructions.
Allowable Roof Coverings: Asphalt shingles
OCR14003.3 FL10758-R7 Page 2 of 5
This evaluation report is provided for State of Florida product approval under Rule 61 G20-3. The manufacturer shall notify CREEK
Technical Services, LLC of any product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express nor imply warranty, installation, recommended use, or other product attributes that are not
specifically addressed herein.
CREEK OWENS CORNING ROOFING AND ASPHALT LLC
VentSure® Roof Ventilation
TECHNICAL SERVICES, LLC
VentSure'9 Low Profile 18" x 24" x 2-3/16" (32" x 23" flange base) static off -ridge vent composed of ASTM
Slant Back Roof Vent A653 galvanized steel (available with painted finish). Material shall conform with
with Exterior Louver: FBC Section 1507.4.3.
I,
1
onaaI r
T
I4Q I I BOrro ,w
awe, o-ur v arr . " 1
I:'RW
980 RtCNI —T
Deck Type: Roof deck shall be constructed of closely fitted sheathing for new or existing
construction. Roof deck shall be designed and installed in accordance with FBC
requirements.
Roof slope: Minimum 3:12
Installation Height: Maximum 33-ft
Attachment Method: Cut an 11 x 11-inch hole through wood sheathing only approximately 18-inches from
the ridge. Apply 1/4-inch thick by 3-inch wide bed of ASTM D 4586 roofing cement
around inner and outer flange. Place vent directly over the hole, ensuring the vent
sits flat on the roof. Fasten vent 4-inches o.c. and 1-inch from outside edge of flange
with minimum 12 ga. ring shank roofing nails (shall comply with FBC Section
1506.5), ensuring %-inch penetration through wood deck (Minimum 18 nails per
vent).
Install baffle in Y.-inch bed of ASTM D 4586 roofing cement and secure with
minimum 12 ga. ring shank roofing nails (shall comply with FBC Section 1506.5)
spaced 8-inches o.c. (total of (3) nails) while ensuring %-inch penetration through
wood deck. Seal all nails and vent flange with ASTM D 4586 roofing cement.
Allowable Roof Coverings: Asphalt shingles
OCR14003.3 FL10758-R7 Page 3 of 5
This evaluation report is provided for State of Florida product approval under Rule 61G20-3. The manufacturer shall notify CREEK
Technical Services, LLC of any product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express nor imply warranty, installation, recommended use, or other product attributes that are not
specifically addressed herein.
CREEK OWENS CORNING ROOFING AND ASPHALT LLC
VentSure® Roof Ventilation
TECHNICAL SERVICES, LLC
VentSure01 Rigid Roll 5/8" x 11-1/4" x 20' attic ridge vent composed of high density polypropylene with a
Ridge Vent: spun -bond polypropylene fabric.
Deck Type: Roof deck shall be constructed of closely fitted sheathing for new or existing
construction. Roof deck shall be designed and installed in accordance with FBC
requirements.
Roof slope: Minimum 2:12 to maximum 20:12
Installation Height: Maximum 60-ft
Attachment Method: Cut a 2-inch opening (1-inch on each side of the ridge) centered in the deck at the
ridge for ventilation. The slot shall terminate approximately 12-inches from the rake
edges. Apply a continuous bead of polyurethane adhesive sealant along the entire
length of the outside edges of the vent to seal the vent to the field shingles. Center
the vent over the opening and fasten the vent 24-inches o.c. to the deck using
minimum 12 ga. ring shank roofing nails (shall comply with FBC Section 1506.5),
ensuring %-inch penetration through wood deck.
Fasten the ridge shingles over the vent to the deck on the marked "shingle nail line"
with two (2) minimum 12 ga. ring shank roofing nails (shall comply with FBC Section
1506.5) or as directed by the shingle manufacturer's installation instructions,
ensuring %-inch penetration through wood deck. Outside edges of the shingles shall
be sealed with flashing cement.
Allowable Roof Coverings: Asphalt shingles
LIMITATIONS
1) Fire Classification is outside the scope of this evaluation.
2) This report is not for use in the HVHZ.
3) The roof deck and deck attachment shall be designed by others in accordance with the FBC.
4) All products listed in this report shall be manufactured under a quality assurance program in compliance with
Rule 61 G20-3.
5) Owens Corning vents shall be installed in strict compliance with this evaluation report and the
manufacturer's published installation instructions. In the event of conflict, the more restrictive installation
shall be enforced.
6) Deck substrates shall be clean, dry, and free from any irregularities and debris. All fasteners in the deck
shall be checked for protrusion prior to installation.
7) Installation of the roof assembly is outside the scope of this evaluation.
8) Owens Corning vents are intended to provide passive ventilation for an enclosed attic in residential
construction applications.
OCR14003.3 FL10758-R7 Page 4 of 5
This evaluation report is provided for State of Florida product approval under Rule 61 G20-3. The manufacturer shall notify CREEK
Technical Services, LLC of any product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express nor Imply warranty, installation, recommended use, or other product attributes that are not
specifically addressed herein.
CREEK
TECHNICAL SERVICES, LLC
COMPLIANCE STATEMENT
OWENS CORNING ROOFING AND ASPHALT LLC
VentSure® Roof Ventilation
The products evaluated herein by Zachary R. Priest, P.E. have demonstrated compliance with the Florida Building
Code, 6t' Edition (2017) as evidenced in the referenced documents submitted by the named manufacturer.
t1111$
R. • p/,
QG.•G•E1VS c•FS, 201.7.09.30
No 74021 15:16:17
STATE OF : J 041001
itcs • 0 R t •••(j Zachary R. Priest, P.E.
iS if N AI %.1' FloHda
Organization No
RegistrationANE9641021
CERTIFICATION OF INDEPENDENCE
CREEK Technical Services, LLC does not have, nor will it acquire, a financial interest in any company manufacturing or distributing
products under this evaluation.
CREEK Technical Services, LLC is not owned, operated, or controlled by any company manufacturing or distributing products under
this evaluation.
Zachary R. Priest, P.E. does not have, nor will acquire, a financial interest in any company manufacturing or distributing products
under this evaluation.
Zachary R. Priest, P.E. does not have, nor will acquire, a financial interest in any other entity involved in the approval process of the
product.
END OF REPORT
OCR14003.3 FL10758-R7 Page 5 of 5
This evaluation report is provided for State of Florida product approval under Rule 61 G20-3. The manufacturer shall notify CREEK
Technical Services, LLC of any product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express nor imply warranty, installation, recommended use, or other product attributes that are not
specifically addressed herein.
JOB ADDRESS:
PERMIT # _LVS_S J
Building & Fire Prevention Division
RESIDENTIAL RE -ROOF SCOPE OF WORK
Lei
STRUCTURE TYP SINGLE FAMILY RESIDENCE/TOWNHOUSE O MOBILE HOME O APARTMENT/CONDOMINIUM
RE -ROOF TYPE: O REPLACEMENT (TEAR OFF EXISTING ROOF AND REPLACE WITH NEW COMPONENTS)
O RE-COVER (NEW ROOF INSTALLED OVER EXISTING ROOF
k /
DECK TYPE (PLEASE SPECIFY): 1 n I :) y
PLEASE NOTE: ONLY 100 SQUARE FEET THE EXISTING DECK It-PERhITTED TO BE REPLACED"
ROOF VENTILATION: O OFF -RIDGE DGE O SOFFIT OPOWERED VENT O TURBINES
SKYLIGHTS: O YES XNO IF YES, PLEASE PROVIDE FLORIDA PRODUCT APPROVAL #:
MAIN ROOF AREA
ROOF SLOPE: O LESS THAN 2:12 2.12 - 4:12 O 4:12 OR GREATER
TYPE OF ROOF MANUFACTURER FLORIDA PRODUCT APPROVAL
HINGLE I
FL#
0 METAL FL#
O MODIFIED BITUMEN FL#
OTORCH DOWN FL#
OINSULATED FL#
O TILE FL#
O OTHER: FL#
ROOF EXTENSIONS (PORCHES, PATIOS, ETC.) **IF APPLICABLE**
ROOF SLOPE: O LESS THAN 2:12 O 2:12-4:12 O 4:12 OR GREATER
TYPE OF ROOF MANUFACTURER FLORIDA PRODUCT APPROVAL
O SHINGLE FL#
O METAL FL#
O MODIFIED BITUMEN FL#
O TORCH DOWN FL#
O INSULATED FL#
O TILE FL#
0 OTHER: FL#
CITY 4
A NANFORD Building &Fire Prevention Division
RESIDENTIAL RE -ROOF POLICY & PROCED URES
FIRE DEPARTMENT
PERMITTING REQUIREMENTS — NO PLAN REVIEW REQUIRED
THIS DOCUMENT (SIGNED) ALONG WITH AN ACCURATE AND COMPLETED RESIDENTIAL RE -ROOF SCOPE OF WORK ARE
REQUIRED TO BE SUBMITTED AS PART OF YOUR PERMIT APPLICATION.
THE SCOPE OF WORK MUST INCLUDE ALL APPLICABLE FLORIDA PRODUCT APPROVAL NUMBERS FOR ALL ROOF
COMPONENTS THAT WILL BE INSTALLED ON THE PROJECT.
A PERMIT WILL NOT BE ISSUED WITHOUT THESE DOCUMENTS. COPIES WILL BE MADE TO POST ON THE JOB SITE.
PROJECTS LOCATED IN THE SANFORD HISTORIC DISTRICT WILL REQUIRE PLAN REVIEW AND APPROVAL BY THE
SANFORD HISTORIC PRESERVATION BOARD
INSPECTION POLICY & PROCEDURES
A FINAL ROOF INSPECTION IS THE ONLY INSPECTION REQUIRED FOR RESIDENTIAL (SINGLE FAMILY, TOWNHOUSE,
MOBILE HOME, APARTMENT AND/OR CONDOMINIUM) RE -ROOF PERMITS.
THE FOLLOWING IS REQUIRED TO BE PROVIDE ON THE JOB SITE:
PERMIT CARD, POSTED IN A CONSPICUOUS AND WEATHERPROOF LOCATION
COMPLETED RESIDENTIAL RE -ROOF SCOPE OF WORK
COMPLETED AND NOTARIZED INSPECTION AFFIDAVIT
ALL FLORIDA PRODUCT APPROVAL AND CORRESPONDING INSTALLATION INSTRUCTIONS
PRODUCT APPROVAL SHALL MATCH WHAT IS ON THE SCOPE OF WORK)
DIGITAL PHOTOGRAPHS (MUST INCLUDE THE PERMIT NUMBER OR ADDRESS IN EACH PICTURE)
o EACH PLANE OF THE ROOF, SHOWING THE UNDERLAYMENT INSTALLED.
o ROOF DECK NAILING PATTERN & SPACING (INCLUDING A MEASURING DEVICE OR RULER)
o ROOF DECK NAILS USED (INCLUDING A MEASURING DEVICE OR RULER SHOWING SIZE OF NAILS)
o UNDERLAYMENT PATTERN & SPACING (INCLUDING A MEASURING DEVICE OR RULER)
o DRIP EDGE & VALLEY ATTACHMENT (INCLUDING A MEASURING DEVICE OR RULER)
o SHINGLES INSTALLED, NAIL PATTERN AND LOCATION OF NAILS
SKYLIGHTS (IF APPLICABLE)
o DIGITAL PHOTOGRAPHS SHOWING ALL INSTALLATION COMPONENTS, PER FL PRODUCT APPROVAL
o DIGITAL PHOTOGRAPHS SHOWING ALL REQUIRED FLASHING, PER FL PRODUCT APPROVAL
FAILURE TO FOLLOW THESE SPECIFIC GUIDELINES WILL RESULT IN AN AFFIDAVIT PROVIDED BY A FLORIDA DESIGN
PROFESSIONAL (ARCHITECT OR ENGINEER), CERTIFYING FBC CODE COMPLIANCE BY PERSONAL INSPECTION.
CONTRACTOR (OR OWNER/BUILDER) SIGNATURE: DATE:
D City of Sanford
Building and Fire Prevention
RESIDENTIAL RE -ROOF INSPECTION AFFIDAVIT
NAILING, SHEATHING, DRY -IN, FLASHING, AND ALL FINAL ROOF COVERINGS
PERMIT #: _ Liz;
ADDRESS:
SGvk
I e) 7i-'> ' ,
AS A(N) GENERAL, BUILDING, RESIDENTIAL, OR
ROOFING CONTRACTOR, ENGINEER, ARCHITECT, OF F.S. CHAPTER 468 BUILDING INSPECTOR, I HEREBY AFFIRM, THAT ALL OF THE
FOREGOING INFORMATION IS TRUE AND ACCURATE AND THAT ALL ROOFING COMPONENTS LISTED ON THE SCOPE OF WORK AT THE
ABOVE REFERENCED ADDRESS HAVE BEEN INSTALLED IN ACCORDANCE WITH THEIR PRODUCT APPROVALS AND ALL APPLICABLE CODE
REQUIREMENTS - SPECIFICALLY FLORIDA BUILDING CODE, EXISTING BUILDING. IN ADDITION I CERTIFY THE INSTALLATION MEETS ALL
REQUIREMENTS FOR SECONDARY WATER BARRIER AND NAILING OF THE ROOF DECK, IN ACCORDANCE WITH THE HURRICANE RETROFIT
MANUAL REQUIREMENTS (BASED ON F.S. CHAPTER 553.844).
LICENSE
COMPANY/CONTRACTOR:
CONTRACTOR SIGNATURE: _
MUST BE SIGNED BY LICENSE GWNER/BUILDER)
A FINAL ROOF INSPECTION IS REQUIRED:
DATE: 12,
THIS SIGNED AND NOTARIZED AFFIDAVIT MUST BE PROVIDED AT THE JOB SITE AT THE TIME OF THE FINAL ROOF INSPECTION,
ALONG WITH DIGITAL PHOTOGRAPHS OF EACH PLANE OF THE ROOF SHOWING IN DETAIL ALL COMPONENTS (DECKING,
UNDERLAYMENT, FLASHING, DRIP EDGE ATTACHMENT) WITH THE PERMIT NUMBER OR ADDRESS CLEARLY MARKED ON THE DECK
FOR EACH INSPECTION. THE PHOTOGRAPHS MUST INCLUDE A RULER OR MEASURING DEVICE TO CONFIRM ALL NAIL SPACING AND
OVERLAPS, INCLUDING DRIP EDGE AND VALLEY FLASHING. PLEASE REFER TO THE RE -ROOF POLICY AND INSPECTION PROCEDURE
PAPERWORK FOR FURTHER EXPLANATION OF ALL REQUIREMENTS.
FAILURE TO FOLLOW ALL REQUIREMENTS WILL RESULT IN A FAILED INSPECTION, A RE -INSPECTION FEE AS
WELL AS REQUIRING A DESIGN PROFESSIONAL (ARCHITECT OR ENGINEER) TO CERTIFY, BASED ON PERSONAL
INSPECTION, THE INSTALLATION OF ALL ROOFING COMPONENTS.
STATE OF FLORIDA COUNTY OF Sanlvla&
Sworn to and SupNribed before me this y day of j2e4Ce M62t' 20 4 by:
Who is er onally Known to me or has Produced (type of
m ification.
YP CARA
2a",- mission # GG2080"" Com 0,
re EzpilesApni16.? 70+9
c ar ik0.385a{ ocr dllyuTroy.
of Notary Public