1200 Rinehart Rd - BC04-002664 (FIRE SPRINKLER) DOCUMENTSCITY OF SAN FORD PERMIT APPLICATION
Permit # : 0'4=1- Date: 06/30/04
Job Address: 1200 Rinehart Road, Sanford, FL
Description of Work: Install wet overhead fire sprinkler system.
Historic District: Zoning: Value of Work: S 51 , 000.00
Permit Type: Building Electrical Mechanical Plumbing Fire Sprinkler/Alarm X Pool
Electrical: New Service —
# of AMPS
Addition/Alteration
Change of Service Temporary Pole _
Mechanical: Residential
Non -Residential
Replacement
New (Duct Layout & Energy Calc. Required)
Plumbing/ New Commercial: # of Fixtures # of Water & Sewer Lines # of Gas Lines
Plumbing/New Residential: # of Water Closets Plumbing Repair — Residential or Commercial
Occupancy Type: Residential X Commercial Industrial Total Square Footage: 40 , 120 sq . f t .
Construction Type: # of Stories: # of Dwelling Units: Flood Zone: (FEMA form required for other than X)
Parcel tt: (Attach Proof of Ownership & Legal Description)
Owners Name&Address: Seminole Power Sports, 1200 Rinehart Rd., Sanford, FL
Phone:
Contractor Name&Address: Wayne Automatic Fire Sprinklers, Inc.
222 Capitol Court, Ocoee, FL 34761 stte 1 u tr 90293400022002
Phone& Fax: 407-877-5557 • 407-656-80 o t ct c n: ut �, 1 c _phone: 407-877-5557
Bonding Company: N/A O
WIMJ
Address:
Mortgage Lender: N/AJul L
Address
Architect/Engineer: Frank Petersen - Phone.`^ 407-656-3030
L 347 I p
Address: 222 Capitol Court, Ocoee, ., ;'=4D7-656-8026
FFazi
Application is hereby made to obtain a permit to do the work and ifistallatio s i �e c 'fW4 work or installation has commenced prior to the
issuance of a permit and that all work will be performed to meet standards of all laws regulating construction in this jurisdiction. I understand that a separate
permit must be secured for ELECTRICAL WORK, PLUMBING, SIGNS, WELLS, POOLS, FURNACES, BOILERS, HEATERS, TANKS, and
AIR CONDITIONERS, etc.
OWNER'S AFFIDAVIT: I certify that all of the foregoing information is accurate and that all work will be done in compliance with all applicable laws regulating
construction and zoning. WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY RESULT IN YOUR PAYING
TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. IF YOU INTEND TO OBTAIN FINANCING, CONSULT WITH YOUR LENDER OR AN
ATTORNEY BEFORE RECORDING YOUR NOTICE OF COMMENCEMENT.
NOTICE: In addition to the requirements of this permit, there may be additional restrictions applicable to this property that may beound in the public records of
this county, and there may be additional permits required from other governmental entities such as water management districts, s agencies, or federal agencies.
Acceptance of permit is verification that I will notify the owner of the property of the requiremenV!daAw, FS 713.
0 /30/04
Signature of Owner/Agent Date Signature o ontractor Agent
Print Owner/Agent's Name
Signature of Notary -State of Florida Date
Owner/Agent is _
Produced ID
Personally Knon to Me or
APPLICATION APPROVED BY: 131dc: Zoning:
�1,,l &Date)
Special Conditions:
Pete Schwab
Agent's Name
Signature of Notary -State of
Contractor/Aeent is X
Prndiiced ID
(Initial & Date)
�6/6 f
RUTH A. MCCULLOCH
O
.? MY COMMISSION # DD 095595
rr•` EXPIRES: February 26, 2006
K�ci?t;:tY�b M@49#ed Thru Notary PLII)IIC Undeiwriters
�
Utilities: FD,^_"•%� 1Ey�4f
(Initial & Date) (Initial & Date
-W cl,3 . o 0
CITY OF SANFORD FIRE DEPARTMENT
FEES FOR SERVICES
PHONE # 407-302-1091 * FAX #: 407-330-5677
DATE: PERMIT #P
BUSINESS 1
ADDRESS:
D -o(4
PHONE NC FAXN0CL4071
CONST. INSP. [ ] C / O INSP.:[ ] REINSPECTION (] PLANS REVIEW
F. A. [ ] F.S.. HOOD (] PAINT BOOTH [ J BURN PE IT� ]
TENT PERMIT f ] TANK PERMIT [ ] OTHER
TOTAL FEES: $ d� (PER UNIT SEE BELOW)
Address / Bldg. # / Unit #
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
Square Footage Fees per Bldg. / Unit1J
Fees must be paid to Sanford Building Department, 300 N. Park Ave., Sanford, FI. 32771 Phone # -407-
330-5656. Proof of Payment must be made to Fire Prevention division before any further services can take
place. I certify that the above is true and correct and that I
will comply with all applicable codes and ordinances
of the Cit of Sanford, Florid
--�``
-77
Sanford Fire Pre ve 'on Division Applicant's Signature
OW
SANFORD FIRE DEPARTMENT
FIRE PREVENTION DIVISION
300 N. Park Ave., Sanford, Fl. 32771 / P. O. Box 1788, Sanford, FI. 32772
(40 7 302-2520 /FAX (40 7) 330-5677
Pager (407) 918-0395
Plans Review Sheet
Date: July 8, 2004 Business Address: 1200 Rinehart Road
Occ. Ch. #38, #40> Industrial/Business
Business Name: Seminole Power Sports Ph. ( )
Contractor: Wayne Automatic Fire Sprinklers. Ph. (407) 656-3030
FAX (407)656-8026
Reviewed [ ] Reviewedwlth1comment`" [XI Rejected
Reviewed by: Timothy Robles, Fire Protection Inspector/Plans Examiner
Comment: Instillation of Three (3) types of design area / 409 Fire Sprinkler Heads to job
1.1 Application — Per N.F.P.A. #13-1999 ed,
Point of Service connection @ 12" (inch) x 12" x 6" Tee (This starts @ Rinehart Road and far
Northern drive way)
➢ Design System #1= Ordinary Hazard Group #1> Show Room non -combustibles,
ceiling height @ 29'(ft)
(No Stock piles over 8') (ft)
• Design System #2=Ordinary Hazard Group #2 Repair Garage
Ceiling height 13' (ft) Stock piles shall not exceed 12' (ft).
Design System #3> Exterior Parking Canopy Ordinary Hazard Group #1, (No Stock piles
over 8') (ft) (Ceiling height is 13' (ft)
➢ Post signs on all fire sprinkler valves and (or) fire inspectors test valves
SANFORD FIRE DEPARTMENT
FIRE PREVENTION DIVISION
300 N. Park Ave., Sanford, Fl. 32771 / P. O. Box 1788, Sanford, Fl. 32772
(40 7 302-2520 1 FAX (407) 330-5677
Pager (407) 918-0395
Miser #1
• Fire sprinkler heads >253 central %2" orifice (TY -B) 153 DEGRESS K= 5.6
Brass upright with no escutcheon
• Fire sprinkler heads >127 central %2" orifice (TY -3231) ...155 dg, K=5.6
Quick response white semi —resc Escutcheon
• Fire sprinkler heads >3 central 11/2" orifice (TY -3551) 155 DEGRESS K= 5.6
concealed pendant
• Fire sprinkler heads >1 central 1/2" orifice (TY -3551) 200 DEGRESS K= 5.6
Brass horizontal sidewall with no escutcheon
• Fire sprinkler heads >3 central 1/2" orifice (TY -3551) 155-DEGRESS K=
5.6 Brass Horizontal sidewall with no escutcheon
• Fire sprinkler heads >22 central 1/2" orifice (TY -3255) 200
DEGRESS K= 5.6 White dry pendant with two (2) piece extension
to escutcheon
Label all fire sprinkler valves (this includes inside and out of structure)
All inside and out side "Shut Off Valves" Shall be equipped with a TAMPER
SWITH
2
Regional Offzc.es:' Jacksonville, Fort.Myer,s' Ponipano=B:e�ach °"Cgncoid,.NC
IR
SANFORD FIRE DEPARTMENT
FIRE PREVENTION DIVISION
300 N. Park Ave., Sanford, Fl. 32771 / P. O. Box 1788, Sanford, Fl. 32772
(407 302-2520 / FAX (407) 330-5677
Pager (407) 918-0395
Plans Review Sheet
Date: July 8, 2004 Business Address: 1200 Rinehart Road
Occ. Ch. #38, #40> Industrial/Business
Business Name: Seminole Power Sports
Contractor: Wayne Automatic Fire Sprinklers.
Reviewed [ ]
Ph.()
Ph. (407) 656-3030
FAX (407)656-8026
Rejected
Reviewed by: Timothy Robles, Fire Protection Inspector/Plans IZ—_
Instillation of Three (3) types of design area / 409 Fire Sprinkler Heads to job
1.1 Application — Per N.F.P.A. #13-1999 ed,
Point of Service connection @ 12" (inch) x 12" x 6" Tee (This starts @ Rinehart Road and far
Northern drive way)
➢ Design System #1= Ordinary Hazard Group #1> Show Room non -combustibles,
ceiling height @ 29'(ft)
(No Stock piles over 8') (ft)
• Design System #2=Ordinary Hazard Group #2 Repair Garage
Ceiling height 13' (ft) Stock piles shall not exceed 12' (ft).
Design System #3> Exterior Parking Canopy Ordinary Hazard Group #1, (No Stock piles
over 8') (ft) (Ceiling height is 13' (ft)
➢ Post signs on all fire sprinkler valves and (or) fire inspectors test valves
1
1
SANFORD FIRE DEPARTMENT
FIRE PREVENTION DIVISION
300 N. Park Ave., Sanford, Fl. 32771 / P. O. Box 1788, Sanford, Fl. 32772
(407 302-2520 / FAX (407) 330-5677
Pager (407) 918-0395
Riser #1
• Fire sprinkler heads >253 central 1/2" orifice (TY -B) 153 DEGRESS K= 5.6
Brass upright with no escutcheon
• Fire sprinkler heads >127 central 1/2" orifice (TY -3231) ...155 dg, K=5.6
Quick response white semi —resc Escutcheon
• Fire sprinkler heads >3 central %2" orifice (TY -3551) 155 DEGRESS K= 5.6
concealed pendant
• Fire sprinkler heads >1 central %2" orifice (TY -3551) 200 DEGRESS K= 5.6
Brass horizontal sidewall with no escutcheon
• Fire sprinkler heads >3 central %2" orifice (TY -3551) 155-DEGRESS K=
5.6 Brass Horizontal sidewall with no escutcheon
• Fire sprinkler heads >22 central 1/2" orifice (TY -3255) 200
DEGRESS K= 5.6 White dry pendant with two (2) piece extension
to escutcheon
Label all fire sprinkler valves (this includes inside and out of structure)
All inside and out side "Shut Off Valves" Shall be equipped with a TAMPER
SWITH
2
06/03/2004 16:06 9547270332 HODGEN CONSTRUCTION
06/03/2004 03:53 40(--"'?0341AP HQGEhI CONSTE .CN .
_ _ _ T
N[71'1[;i OF COMMENC&'itiiENT
fil1S IWSTRLIMEHT FRVVID
• aerrnic No. NAME
911ktc of Florida +7
to—ty or 70r
THE [RD-EASIO tE0 hereby glut: notice that the Itttymveff= will
x trta0e 10 CGMItt MQ prapettY in iccotda6c with Cllapta 713, Florid:
sta,um4, the ruDowinA inEonoulon is provided in (hla tatice of
Mtrtmensemcat,
I-Cksoription of Property (4*dAa&jp0AW efP'oJ1'aq' and eddresa it avallabt SO® ahaehad
,%Gcr" description of improvementg- NeW Makorcyale dealershipfsportta center
3.0kL'ntr illJuti1t41itln /
a)14 Ime and addres�Ciss!"
bUcrcA in proMy
¢)Nanta land tlldteg of rep almole lillehoWd fif 411e1r 44h &mi -i% "-fl--_ 7 . _ .
� L a .b.Jti pl
b.Canlru or (mune and ad&es:p)_ Modgan ConaVu9tion 8 9"elopment: Graup. Inc.
S.3urax 77160 Arxida Parkway, Weston, PL 33326
,Mme and tddreu
ti)+'+mowtt or bond
SJ--Indcs (name and Address)
7.Persoo widW, the Stale of Ploridt+ desit+tated by owner ppoa who notices or Mher decumonto easy bo served u
prarrided-by Secuoit 713.13(1)(tt317)• Fkcjda Stalucs,
Name and addrsu Y
4.1n addition io him os harsW, owner dwgnstes
o[ o MCIVo i copy of the S.ianWs Notice a pravtded in Sestiatt
713,(7{1)ib), Florida Stswar.
Q.lxpiration date ortiatiae of celtuMenreateht_ exptraltan data is ant yrs,
bean the dale of r8FORIMS unless y diftetenl dale it specined);
STAT: Of FlXRtDA
COUNTY 0Fa3_,, Signature Df wtter
TKO ron6wing inartuaatu tvatt a�toa lodged before me thIsj_2dAy or, Lv. by t�
who LI personalty i ca" w tnc or Who produre ldatrJ;eed
L>; t.h1.S
Aftcr root in To lei
Namo iVame(prtiar}
Add? 1 Title or ruder_
City Sstael Aft*, if any.
."`
4� p yr=— t��o,
9w��! �A��t�rgr,r 2M
1
MM OF SIIIIAI�„MM OF t? dIAQIIT l�t1AT
i9K 05235 pas esgo-0895
FILM NUM R tb4841945
M=gnu M1221P'E1614 altletu PN
IEM114 FEB 10, 51
"EMM HY L 1hadloy
PAGE 01
PAGE 01
'Y•
� �
�.
} BOWT (nm TM
LOTS 4 .:, 11, pK
PAM 27, PURr
:»ws<
.a.
.\� `
_
I 11 Z A\ K.
<�Elctyl Tw PMVWW.T-,
'« w, LM
$ OF ^ \,,. >. \
.x\
\. • . \ * ® ® e
«&
4-
CN
-qVICINITY
v .. .
<
(.:
\6
c 0 v
.$.p 0
y¥,00,2: }
\$ cn`
\� �11�� !
p00
k"A
�.K
�MurIAI�IlIE
Automatic Fire Sprinklers, Inc.
a a °
Rea;x
Fire Protection Engineering, Inc. `
222 CAMOL COURT OCOEE, R 34761
N (407) 877-5589 FAX: (407) 656-8026 `� U � A
Ce Rate d Auftmakn Number 7523
HYDRAULIC CALCULATIONS
Wayne Automatic
Fire Sprinklers Inc.
222 Capitol Court
Ocoee Florida 34761
407-656-3030
Job Name :04377 SEMINOLE POWER SPORTS
Building :REMOTE AREA -1
Location :SANFORD FLORIDA
Design Area :SHOWROOM
Contract :04377
Data File :0437701.WX1
Computer Programs by Hydratec Inc. Route 111 Windham N.H. USA 03087
Wayne Automatic Page 1
04377 SEMINOLE POWER SPORTS Date 06/24/04
Hydraulic Desiqn Information Sheet
Name - 04377 SEMINOLE POWER SPORTS Date - 06/24/04
Location - SANFORD FLORIDA
Building - REMOTE AREA -1 System No. - SHOWROOM
Contractor - HODGEN CONSTRUCTION DEV. GP. Contract No. - 04377
Calculated By - F PETERSEN Drawing No. FP2
Construction: ( ) Combustible (X) Non -Combustible Ceiling Height - 29 ft.
Occupancy - SHOWROOM
S (X) NFPA 13 ( ) Lt. Haz. Ord.Haz.Gp. (X) 1 ( ) 2 ( ) 3 ( ) Extra Haz.
Y ( ) NFPA 231 ( ) NFPA 231C ( ) Figure - Curve -
S Other -
T Specific Ruling - Made By - Date -
E
M Area of Sprinkler Operation
- 1514
System Type
Sprinkler or Nozzle
Density
- 0.15
(X) Wet
Make - CENTRAL
D Area Per Sprinkler
- 130
( ) Dry
Model - TYB
E Elevation at Highest Outlet -
29
( ) Deluge
Size - 1/2"
S Rack Sprinkler Allowance -
0
( ) Preaction
K -Factor - 5.6
I Hose Allowance Inside -
0
( ) Other
Temp.Rat.- 155A
G Hose Allowance - Outside -
250
Shelf (
U
N
P Location - SINGLE HYDRANT
FLOW FROM EXISTING UNIT
Note -
P AT RINEHART AND OREGON
Calculation Flow Required -
494.29 Press Required
- 46.259 AT TEST
Summary C -Factor Used:
120 - Overhead
150 - Underground
W Water Flow Test:
Pump Data:
Tank or Reservoir:
A Date of Test - 06/18/2004
M Storage Method: Solid Piled.- %
Palletized - %
T Time of Test - 0900 HRS
Rated Cap.-
Capacity -
P Y
E Static Press - 53
p Press -
Elevation -
R Residual Press - 48
Elevation -
Well Proof Flow -
Flow - 1125
) Encapsulated
S R ( ) Double Row ( )
S Elevation - 5
( ) Solid
Shelf (
U
T A ( ) Multi Row
P Location - SINGLE HYDRANT
FLOW FROM EXISTING UNIT
P AT RINEHART AND OREGON
L Source of Information - LJ
SMITH AND F PETERSEN
R K Flue Spacing -
Y OF WAYNE AUTOMATIC FIRE SPRINKLERS, INC
C Commodity -
Class -
Location
-
0 Storage Ht.- ft.
Area -
Aisle W.
-
M Storage Method: Solid Piled.- %
Palletized - %
Rack -
M
( ) Single Row ( )
Conven. Pallet
( ) Auto.
Storage (
) Encapsulated
S R ( ) Double Row ( )
Slave Pallet
( ) Solid
Shelf (
) Non Encaps.
T A ( ) Multi Row
( ) Open
Shelf
0 C
R K Flue Spacing -
Clearance:
Storage to
Ceiling - ft.
A Longitudinal -
Transverse
-
G
E Horizontal Barriers
Provided:
Computer Programs by Hydratec Inc. Route 111 Windham N.H. USA 03087
.. ..,,uVvly vui vc k% -'I ;
Wayne Automatic Page 2 f
04377 SEMINOLE POWER SPORTS Date 06/24/04
i
City Water Supply:
C1 - Static Pressure :53 PSI
C2 - Residual Pressure: 48 PSI
C2 - Residual Flow :1125 GPM
150
SI 1404
SI130
p 120
� 110
100
D1 - Elevation 10.3
D2 - System Flow :244.2
D2 - System Pressure 46.2
Hose ( Adj City )
Hose ( Demand ) 250 G
D3 - System Demand 494.2
Safety Margin 5.6
S
S
3
9
M
3
9
E
90
S
80
S
70
U
60
Cl
R
50
D3
E
40
30
20
D1
10
200 400 600 800 1000 1200 1400 1600 1800
FLOW ( N 1.85 )
Computer Proarams by Hvdratec Inc. Route 111 Windham N.H. USA 03087
PM
PM
PM
D1 - Elevation 10.3
D2 - System Flow :244.2
D2 - System Pressure 46.2
Hose ( Adj City )
Hose ( Demand ) 250 G
D3 - System Demand 494.2
Safety Margin 5.6
Cl
D3
D1
Computer Proarams by Hvdratec Inc. Route 111 Windham N.H. USA 03087
PM
PM
PM
Wayne Automatic Page 3
04377 SEMINOLE POWER SPORTS Date 06/24/04
Fitting Legend
Abbrev. Name
A
Generic Alarm Va
B
Generic Butterfly Valve
C
Roll Groove Coupling
D
Dry Pipe Valve
E
90' Standard Elbow
F
45' Elbow
G
Gate Valve
H
POZ-LOK 90
I
POZ-LOK TEE
J
Angle Valve
K
Detector Check Valve
L
Long Turn Elbow
M
Medium Turn Elbow
N
Mechanical Tee
Q
Flow Control Valve
R
CPVC ST TEE
S
Swing Check Valve
T
90' Flow thru Tee
U
CPVC 90
V
CPVC TEE
W
Wafer Check Valve
X
CPVC 45
Y
CPVC COUP -STRAIGHT TEE
Z
Flow Switch
Computer Programs by Hydratec Inc. Route 111 Windham N.H. USA 03087
Wayne
04377
Automatic
SEMINOLE POWER
SPORTS
29.0
Page
Date
4
06/24/04
Unadjusted
Fittings
Table
10.0
12.0
19.0
21.0
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
3 1/2
4
A
1.0
D
47.0
7.7
21.5
17.0
B
E
12.0
14.0
18.0
22.0
7.0
10.0
40.0
12.0
C
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
D
28.0
G
2.0
3.0
4.0
5.0
9.5
17.0
8.0
28.0
E
2.0
2.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
10.0
F
1.0
1.0
1.0
1.0
2.0
2.0
3.0
3.0
3.0
4.0
G
J
71.0
1.0
1.0
1.0
1.0
2.0
H
K
2.0
3.0
4.0
45.0
I
L
5.0
7.0
8.0
16.0
18.0
24.0
27.0
30.0
J
40.0
M
15.0
19.0
23.0
29.0
35.0
43.0
57.0
K
N
14.0
14.0
L
1.0
1.0
2.0
2.0
2.0
3.0
4.0
5.0
5.0
6.0
M
2.0
2.0
3.0
3.0
4.0
5.0
6.0
6.0
8.0
N
2.0
4.0
5.0
6.0
8.0
10.5
12.5
15.5
87.0
22.0
4
130.0
T
25.0
30.0
35.0
18.0
60.0
29.0
81.0
35.0
R
121.0
1.0
1.0
1.0
1.0
1.0
2.0
2.0
S
4.0
5.0
5.0
7.0
9.0
11.0
14.0
16.0
19.0
22.0
T
3.0
4.0
5.0
6.0
8.0
10.0
12.0
15.0
17.0
20.0
U
4.0
5.0
6.0
7.0
9.0
12.0
13.0
V
3.0
5.0
6.0
8.0
10.0
12.0
15.0
W
Z
12.0
14.0
18.0
22.0
27.0
35.0
40.0
45.0
X
61.0
1.0
1.0
2.0
2.0
2.0
3.0
4.0
10.3
Y
1.0
1.0
1.0
1.0
1.0
2.0
2.0
Z
2.0
2.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
10.0
5 6 8 10 12 14 16 18 20 24
A
17.0
27.0
29.0
B
9.0
10.0
12.0
19.0
21.0
C
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
D
47.0
E
12.0
14.0
18.0
22.0
27.0
35.0
40.0
45.0
50.0
61.0
F
5.0
7.0
9.0
11.0
13.0
17.0
19.0
21.0
24.0
28.0
G
2.0
3.0
4.0
5.0
6.0
7.0
8.0
10.0
11.0
13.0
H
I
J
71.0
K
36.0
55.0
45.0
L
8.0
9.0
13.0
16.0
18.0
24.0
27.0
30.0
34.0
40.0
M
10.0
12.0
16.0
19.0
22.0
N
4
33.0
R
S
27.0
32.0
45.0
55.0
65.0
76.0
87.0
98.0
109.0
130.0
T
25.0
30.0
35.0
50.0
60.0
71.0
81.0
91.0
101.0
121.0
U
V
W
13.1
31.8
35.8
27.4
X
Y
Z
12.0
14.0
18.0
22.0
27.0
35.0
40.0
45.0
50.0
61.0
Computer Programs by Hydratec Inc. Route 111 Windham N.H. USA 03087
. .......... .., . ... .. VITA II I ILA Ir - V Irl1r Vrl1%L.f t
c
Wayne Automatic Page 5
04377 SEMINOLE POWER SPORTS Date 06/24/04
Node Elevation K -Fact Pt Pn Flow Density Area Press
No• Actual Actual V--
1
29.0
5.6
12.13
na
19.5
.15
130
7.0
2
29.0
5.6
12.16
na
19.52
.15
130
7.0
3
29.0
5.6
12.26
na
19.61
.15
130
7.0
4
.29.0
5.6
12.5
na
19.8
.15
130
7.0
5
29.0
5.6
12.89
na
20.11
.15
130
7.0
6
29.0
5.6
13.49
na
20.57
.15
130
7.0
101
29.0
25.31
na
7
29.0
5.6
13.4
na
20.5
.15
130
7.0
8
29.0
5.6
13.43
na
20.52
.15
130
7.0
9
29.0
5.6
13.55
na
20.61
.15
130
7.0
10
29.0
5.6
13.8
na
20.8
.15
130
7.0
11
29.0
5.6
14.24
na
21.13
.15
130
7.0
12
29.0
5.6
14.9
na
21.61
.15
130
7.0
102
29.0
25.19
na
301
25.0
28.63
na
302
25.0
28.66
na
400
25.0
30.82
na
TASR
25.0
31.31
na
BASR
2.0
41.79
na
SPIG
0.0
42.72
na
BFP2
0.0
43.09
na
BFP1
0.0
48.25
na
HYD
0.0
48.26
na
250.0
CITY
0.0
48.29
na
900
5.0
46.19
na
901
5.0
46.2
na
TEST
5.0
46.26
na
The maximum velocity is 10.54 and it occurs in the pipe between nodes 12 and 102
Computer Programs by Hydratec Inc. Route 111 Windham N.H. USA 03087
Wayne Automatic
04377
SEMINOLE POWER SPORTS
Page 6
Date 06/24/04
Hyd.
Qa
Dia.
Fitting
Pipe
Pt
Pt
Ref.
"c"
or
Ftng's
Pe
Pv
******* Notes
******
Point Qt
Pf/UL
Eqv. Ln.
Total
Pf
Pn
1
19.50
2.203
9.000
12.125
K Factor = 5.60
to
120
0.0
0.0
2
19.5
0.0033
9.000
0.030
Vel = 1.641
2
19.52
2.203
9.000
12.155
K Factor = 5.60
to
120
0.0
0.0
3
39.02
0.0121
9.000
0.109
Vel = 3.284
3
19.62
2.203
9.000
12.264
K Factor -=5.60
to
120
0.0
0.0
4
58.64
0.0257
9.000
0.231
Vel = 4.936
4
19.79
2.203
9.000
12.495
K Factor = 5.60
to
120
0.0
0.0
5
78.43
0.0440
9.000
0.396
Vel = 6.602
5
20.11
2.203
9.000
12.891
K Factor = 5.60
to
120
0.0
0.0
6
98.54
0.0670
9.000
0.603
Vel = 8.294
6
20.57
2.203
2T 13.639
90.000
13.494
K Factor = 5.60
to
120
lE 6.819
34.096
0.0
101
119.11
0.0952
124.096
11.815
Vel = 10.026
101
0.0
2.203
1T 13.639
3.000
25.309
to
120
13.639
1.732
301
119.11
0.0952
16.639
1.584
Vel = 10.026
0.0
119.11
28.625
K Factor = 22.26
7
20.50
2.2039.000
13.396
K Factor = 5.60
to
120
0.0
0.0
8
20.5
0.0037
9.000
0.033
Vel = 1.725
8
20.52
2.203
9.000
13.429
K Factor = 5.60
to
120
0.0
0.0
9
41.02
0.0132
9.000
0.119
Vel = 3.453
9
20.61
2.203
9.000
13.548
K Factor = 5.60
to
120
0.0
0.0
10
61.63
0.0281
9.000
0.253
Vel 5.187
10
20.80
2.203
9.000
13.802
K Factor = 5.60
to
120
0.0
0.0
11
82.43
0.0482
9.000
0.434
Vel = 6.938
11
21.13
2.203
9.000
14.235
K Factor = 5.60
to
120
0.0
0.0
12
103.56
0.0734
9.000
0.661
Vel = 8.717
12
21.62
2.203
1T 13.639
85.000
14.897
K Factor = 5.60
to
120
13.639
0.0
102
125.18
0.1044
98.639
10.296
Vel = 10.536
102
0.0
2.203
1T 13.639
3.000
25.192
to
120
13.639
1.732
302
125.18
0.1044
16.639
1.737
Vel = 10.536
0.0
Computer Programs by Hydratec Inc. Route 111 Windham
N,H. USA
03087
Computer Programs by Hydratec Inc. Route 111 Windham N.H. USA 03087
c
Wayne
Automatic
Page 7
04377
SEMINOLE POWER SPORTS
Date 06/24/04
Hyd.
Qa
Dia.
Fitting
Pipe
Pt
Pt
Ref.
"C"
or
Ftng's Pe
Pv *******
Notes
******
Point
Qt
Pf/UL
Eqv. Ln.
Total
Pf
Pn
125.18
28.661
K Factor = 23.38
301
119.11
4.31
10.000
28.625
to
120
0.0
0.0
302
119.11
0.0036
10.000
0.036
Vel
= 2.619
302
125.18
4.31
1T 27.874
130.000
28.661
to
120
27.874
0.0
400
244.29
0.0137
157.874
2.161
Vel
= 5.372
400
0.0
4.31
2E 13.937
8.000
30.822
to
120
27.874
0.0
TASK
244.29
0.0137
35.874
0.491
Vel
= 5.372
TASR
0.0
4.31
1Z 13.937
23.500
31.314
to
120
13.937
9.961
BASR
244.29
0.0137
37.437
0.512
Vel
= 5.372
BASR
0.0
6.357
lE 17.603
15.000
41.787
to
120
17.603
0.866
SPIG
244.29
0.0021
32.603
0.067
Vel
= 2.469
SPIG
0.0
5.86
2E 17.893
144.000
42.721
to
150
35.785
0.0
BFP2
244.29
0.0020
179.785
0.365
Vel
= 2.906
BFP2
0.0
6.34
4E 23.108
10.000
43.086
to
140
92.433
5.000
Fixed loss = 5
BFP1
244.29
0.0016
102.433
0.161
Vel
= 2.483
BFP1
0.0
6.08
5.000
48.247
to
150
0.0
0.0
HYD
244.29
0.0016
5.000
0.008
Vel
= 2.700
HYD
250.00
11.68
1T 81.513
35.000
48.255
Qa =
250
to
150
1G 8.151
89.660
0.0
CITY
494.29
0.0003
124.660
0.032
Vel
= 1.480
CITY
0.0
16.72
1T207.666
775.000
48.287
to
150
4F 48.712
625.534
-2.166
900
494.29
1S223.0481400.534
0.063
Vel
= 0.722
900
0.0
16.72
1T182.782
150.000
46.185
to
140
182.782
0.0
901
494.29
0.0001
332.782
0.017
Vel
= 0.722
901
0.0 .16.72
1100.000
46.202
to
140
0.0
0.0
TEST
494.29
0.0001
1100.000
0.057
Vel
= 0.722
.0
494.29
46.259
K Factor = 72.67
Computer Programs by Hydratec Inc. Route 111 Windham N.H. USA 03087
Wayne Automatic Page 1
04377 SEMINOLE POWER SPORTS Date 06/24/04
Hydraulic Design Information Sheet
Name - 04377 SEMINOLE POWER SPORTS
Date
- 06/24/04
Location - SANFORD FLORIDA
Density
- .20
(X) Wet
Building - REMOTE AREA -2
D Area Per Sprinkler -
System No. -
SERVICE
Contractor -
E Elevation at Highest Outlet -
Contract No. -
04377
Calculated By - F PETERSEN
S Rack Sprinkler Allowance -
Drawing No. -
FP2
Construction: ( ) Combustible
(X) Non -Combustible
Ceiling Height -
13 ft.
Occupancy - REPAIR GARAGE
G Hose Allowance - Outside -
250
Shelf (
S ( ) NFPA 13 ( ) Lt. Haz .
Ord . Haz . Gp . ( ) 1 ( )
2 ( ) 3 ( ) Extra Haz .
Y ( ) NFPA 231 ( ) NFPA 231C
( ) Figure -
Curve -
P AT RINEHART AND OREGON
S Other -
L Source of Information - LJ
SMITH AND F PETERSEN
T Specific Ruling -
Made By -
Date
-
E
M Area of Sprinkler Operation
- 1553
System Type
Sprinkler or Nozzle
Density
- .20
(X) Wet
Make - CENTRAL
D Area Per Sprinkler -
130
( ) Dry
Model - TYB
E Elevation at Highest Outlet -
13
( ) Deluge
Size - 1/211
S Rack Sprinkler Allowance -
0
( ) Preaction
K -Factor - 5.6
I Hose Allowance Inside -
0
( ) Other
Temp -Rat.- 155A
G Hose Allowance - Outside -
250
Shelf (
U
N
P Location - SINGLE HYDRANT
FLOW FROM EXISTING UNIT
Note -
P AT RINEHART AND OREGON
Calculation
Flow Required -
469.61 Press Required
- 43.903 AT TEST
Summary C -Factor Used:
120 - Overhead
150 - Underground
W Water Flow Test:
Pump Data:
Tank or Reservoir:
A Date of Test - 06/18/2004
Palletized -
T Time of Test - 0900 HRS
Rated Cap.-
Capacity -
P Y
E Static Press - 53
@ Press -
Elevation -
R Residual Press - 48
Elevation -
Well Proof Flow -
Flow - 1125
) Encapsulated
S R ( ) Double Row ( )
S Elevation - 5
( ) Solid
Shelf (
U
T A ( ) Multi Row
P Location - SINGLE HYDRANT
FLOW FROM EXISTING UNIT
P AT RINEHART AND OREGON
L Source of Information - LJ
SMITH AND F PETERSEN
R K Flue Spacing -
Y OF WAYNE AUTOMATIC FIRE SPRINKLERS, INC
C Commodity -
Class -
Location
-
0 Storage Ht.- ft.
Area -
Aisle W.
-
M Storage Method: Solid Piled -
Palletized -
Rack -
M
( ) Single Row ( )
Conven. Pallet
( ) Auto.
Storage (
) Encapsulated
S R ( ) Double Row ( )
Slave Pallet
( ) Solid
Shelf (
) Non Encaps.
T A ( ) Multi Row
( ) Open
Shelf
O C
R K Flue Spacing -
Clearance:
Storage to
Ceiling - ft.
A Longitudinal -
Transverse
-
G
E Horizontal Barriers
Provided:
\wwv
P�uaAYIUE
Automatic Fire Sprinklers, Inc.
o a
N, a na °
Fire Protection Engineering, Inc.
222 CAPITOL COURT OCOff, R 34761
N (407) 877-55x9 FAX: (407) 656-8026
Cerfficate d Aulh=afiw Nun w 7523
HYDRAULIC CALCULATIONS
Wayne Automatic
Fire Sprinklers Inc.
222 Capitol Court
Ocoee Florida 34761
407-656-3030
Job Name
:04377 SEMINOLE POWER SPORTS
Building
:REMOTE AREA -2
Location
:SANFORD FLORIDA
Design Area
:SERVICE
Contract
:04377
Data File
:0437702.WX1
Computer Programs by Hydratec Inc. Route 111 Windham N.H. USA 03087
L
Wayne Automatic Page 1
04377 SEMINOLE POWER SPORTS Date 06/24/04
Hydraulic Design Information Sheet
Name - 04377 SEMINOLE POWER SPORTS
Date
- 06/24/04
Location - SANFORD FLORIDA
Density
- .20
(X) Wet
Building - REMOTE AREA -2
D Area Per Sprinkler
System No. -
SERVICE
Contractor -
E Elevation at Highest Outlet
Contract No. -
04377
Calculated By - F PETERSEN
S Rack Sprinkler Allowance
Drawing No. -
FP2
Construction: ( ) Combustible
(X) Non -Combustible
Ceiling Height
- 13 ft.
Occupancy - REPAIR GARAGE
G Hose Allowance - Outside -
250
S ( ) NFPA 13 ( ) Lt. Haz.
Ord.Haz.Gp. ( ) 1 (X)
2 ( ) 3 ( ) Extra Haz.
Y ( ) NFPA 231 ( ) NFPA 231C
( ) Figure -
Curve -
S Other -
T Specific Ruling -
Made By -
Date
-
E
M Area of Sprinkler Operation
- 1553
System Type
Sprinkler or Nozzle
Density
- .20
(X) Wet
Make - CENTRAL
D Area Per Sprinkler
- 130
( ) Dry
Model - TYB
E Elevation at Highest Outlet
- 13
( ) Deluge
Size - 1/2"
S Rack Sprinkler Allowance
- 0
( ) Preaction
K -Factor - 5.6
I Hose Allowance Inside
- 0
( ) Other
Temp.Rat.- 155A
G Hose Allowance - Outside -
250
N
Note -
Calculation Flow Required - 469.61 Press Required - 43.903 AT TEST
Summary C -Factor Used: 120 - Overhead 150 - Underground
W Water Flow Test: Pump Data: Tank or Reservoir:
A Date of Test - 06/18/2004
T Time of Test - 0900 HRS Rated Cap.- Capacity -
E Static Press - 53 @ Press - Elevation -
R Residual Press - 48 Elevation - Well Proof Flow -
Flow - 1125
S Elevation - 5
U
P Location - SINGLE HYDRANT FLOW FROM EXISTING UNIT
P AT RINEHART AND OREGON
L Source of Information - LJ SMITH AND F PETERSEN
Y OF WAYNE AUTOMATIC FIRE SPRINKLERS, INC
C Commodity - Class - Location -
0 Storage Ht.- ft. Area - Aisle W. -
M Storage Method: Solid Piled - Palletized - Rack -
M
( ) Single Row ( ) Conven. Pallet ( ) Auto. Storage ( ) Encapsulated
S R ( ) Double Row ( ) Slave Pallet ( ) Solid Shelf ( ) Non Encaps.
T A ( ) Multi Row ( ) Open Shelf
O C
R K Flue Spacing - Clearance: Storage to Ceiling -
A Longitudinal - Transverse -
G
E Horizontal Barriers Provided:
ft.
v v -j - -- - " \"/
Wayne Automatic
04377 SEMINOLE POWER SPORTS Page 2
Date 06/24/04
Computer Programs by Hvdratec Inc. Route 111 Windham N.H. USA 03087
t
Wayne Automatic Page 3
04377 SEMINOLE POWER SPORTS Date 06/24/04
Fitting Legend
Abbrev. Name
A
Generic Alarm Va
B
Generic Butterfly Valve
C
Roll Groove Coupling
D
Dry Pipe Valve
E
90' Standard Elbow
F
45' Elbow
G
Gate Valve
H
POZ-LOK 90
I
POZ-LOK TEE
J
Angle Valve
K
Detector Check Valve
L
Long Turn Elbow
M
Medium Turn Elbow
N
Mechanical Tee
Q
Flow Control Valve
R
CPVC ST TEE
S
Swing Check Valve
T
90' Flow thru Tee
U
CPVC 90
V
CPVC TEE
W
Wafer Check Valve
X
CPVC 45
Y
CPVC COUP -STRAIGHT TEE
Z
Flow Switch
Computer Programs by Hydratec Inc. Route 111 Windham N.H. USA 03087
5 6 8 10 12 14 16 18 20 24
A
17.0
27.0
29.0
B
9.0
10.0
12.0
19.0
21.0
Wayne
Automatic
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
D
47.0
Page
4
04377
SEMINOLE POWER
SPORTS
14.0
18.0
22.0
27.0
35.0
Date
06/24/04
Unadjusted
Fittings
Table
5.0
7.0
9.0
11.0
13.0
17.0
19.0
21.0
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
3 1/2
4
10.0
11.0
13.0
H
A
B
I
7.7
21.5
17.0
C
1.0
1.0
1.0
1.0
1.0
1.0
7.0
1.0
10.0
1.0
1.0
12.0
D
K
36.0
55.0
45.0
1.0
E
2.0
2.0
2.0
3.0
4.0
5.0
9.5
6.0
17.0
7.0
8.0
28.0
10.0
F
1.0
1.0
1.0
1.0
2.0
2.0
3.0
3.0
3.0
4.0
G
N
1.0
1.0
1.0
1.0
2.0
H
2.0
3.0
4.0
33.0
I
5.0
7.0
8.0
J
15.0
19.0
23.0
29.0
35.0
43.0
55.0
57.0
K
L
1.0
1.0
2.0
2.0
2.0
3.0
4.0
14.0
5.0
5.0
14.0
6.0
M
81.0
2.0
2.0
3.0
3.0
4.0
5.0
6.0
6.0
8.0
N
2.0
4.0
5.0
6.0
8.0
10.5
12.5
15.5
22.0
4
W
18.0
13.1
29.0
35.8
35.0
R
1.0
1.0
1.0
1.0
1.0
2.0
2.0
S
4.0
5.0
5.0
7.0
9.0
11.0
14.0
16.0
19.0
22.0
T
3.0
4.0
5.0
6.0
8.0
10.0
12.0
15.0
17.0
20.0
U
4.0
5.0
6.0
7.0
9.0
12.0
13.0
V
3.0
5.0
6.0
8.0
10.0
12.0
15.0
W
%
1.0
1.0
2.0
2.0
2.0
3.0
4.0
10.3
Y
1.0
1.0
1.0
1.0
1.0
2.0
2.0
Z
2.0
2.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
10.0
5 6 8 10 12 14 16 18 20 24
A
17.0
27.0
29.0
B
9.0
10.0
12.0
19.0
21.0
C
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
D
47.0
E
12.0
14.0
18.0
22.0
27.0
35.0
40.0
45.0
50.0
61.0
F
5.0
7.0
9.0
11.0
13.0
17.0
19.0
21.0
24.0
28.0
G
2.0
3.0
4.0
5.0
6.0
7.0
8.0
10.0
11.0
13.0
H
I
J
71.0
K
36.0
55.0
45.0
L
8.0
9.0
13.0
16.0
18.0
24.0
27.0
30.0
34.0
40.0
M
10.0
12.0
16.0
19.0
22.0
N
4
33.0
R
S
27.0
32.0
45.0
55.0
65.0
76.0
87.0
98.0
109.0
130.0
T
25.0
30.0
35.0
50.0
60.0
71.0
81.0
91.0
101.0
121.0
U
V
W
13.1
31.8
35.8
27.4
X
Y
Z 12.0 14.0 18.0 22.0 27.0 35.0 40.0 45.0 50.0 61.0
Computer Programs by Hydratec Inc. Route 111 Windham N.H. USA 03087
vVVMIv I I Iv �• VMI
III II .AIy - V 11-114L./r%l%V
Wayne
Automatic
1
I,4
Page
5
04377
SEMINOLE
POWER SPORTS
Date
06/24/04
Node
Elevation
K -Fact
Pt
Pn
Flow
Density
Area
Press
No.
Actual
Actual
Req-
e .D14
D14
13.0
5.6
16.58
na
22.8
.2
114
7.0
S20
11.5
5.6
17.16
na
23.2
.2
116
7.0
D21
13.0
5.6
7.0
na
14.82
.2
62
7.0
13
14.5
5.6
16.58
na
22.8
.2
114
7.0
15
14.5
5.6
16.7
na
22.88
.2
114
7.0
17
14.5
5.6
16.88
na
23.01
.2
114
7.0
19
11.5
5.6
9.74
na
17.48
.2
116
7.0
20
14.5
K = K @ 20
9.76
na
16.92
21
14.5
K = K @ 21
10.64
na
18.49
23
14.5
5.6
18.33
na
23.98
.2
114
7.0
25
14.5
5.6
19.76
na
24.89
.2
114
7.0
27
14.5
5.6
21.5
na
25.97
.2
114
7.0
14
14.5
K = K @ 14
19.15
na
23.2
16
14.5
19.29
na
18
14.5
19.58
na
22
14.5
20.08
na
24
14.5
21.24
na
26
14.5
22.78
na
28
14.5
24.77
na
303
14.5
30.28
na
401
25.5
28.08
na
400
25.5
28.55
na
TASR
25.0
29.17
na
BASR
2.0
39.55
na
SPIG
0.0
40.48
na
BFP2
0.0
40.77
na
BFP1
0.0
45.91
na
HYD
0.0
45.91
na
250.0
CITY
0.0
45.94
na
900
5.0
43.84
na
901
5.0
43.85
na
TEST
5.0
43.9
na
The maximum velocity is 19.63 and it occurs in the pipe between nodes 21 and 22
Computer Programs by Hydratec Inc. Route 111 Windham N.H. USA 03087
� 11 �4� VM�V4�4 •IVB IV V�41 �V 4t V
Wayne Automatic
04377 SEMINOLE POWER SPORTS
)
Page 6
Date 06/24/04
Hyd.
Qa
Dia.
Fitting
Pipe
Pt
Pt
Ref.
licit
or
FtngIs
Pe
Pv ******* Notes
******
Point
Qt
Pf/UL
Eqv. Ln.
Total
Pf
Pn
D14
22.80
1.049
lE
2.000
8.500
16.577
K Factor = 5.60
to
120
1T
5.000
7.000
-0.650
14
22.8
0.1658
15.500
2.570
Vel = 8.464
0.0
22.80
18.497
K Factor = 5.30
S20
23.20
1.049
2E
2.000
5.500
17.163
K Factor = 5.60
to
120
1T
5.000
9.000
-1.299
20
23.2
0.1712
14.500
2.483
Vel = 8.612
0.0
23.20
18.347
K Factor = 5.42
D21
14.82
1.049
1T
5.000
1.500
7.000
K Factor = 5.60
to
120
5.000
-0.650
21
14.82
0.0748
6.500
0.486
Vel = 5.502
0.0
14.82
6.836
K Factor = 5.67
13
22.80
1.049
lE
2.000
8.500
16.577
K Factor = 5.60
to
120
1T
5.000
7.000
0.0
14
22.8
0.1658
15.500
2.570
Vel = 8.464
0.0
22.80
19.147
K Factor = 5.21
15
22.88
1.049
lE
2.000
8.500
16.698
K Factor = 5.60
to
120
1T
5.000
7.000
0.0
16
22.88
0.1669
15.500
2.587
Vel = 8.494
0.0
22.88
19.285
K Factor = 5.21
17
23.01
1.049
2T
5.000
6.000
16.882
K Factor = 5.60
to
120
10.000
0.0
18
23.01
0.1687
16.000
2.699
Vel = 8.542
0.0
23.01
19.581
K Factor = 5.20
19
17.48
1.049
2E
2.000
4.000
9.739
K Factor = 5.60
to
120
1T
5.000
9.000
-1.299
20
17.48
0.1015
13.000
1.319
Vel = 6.489
20
16.91
1.049
2.500
9.757
K Factor @ node 20
to
120
0.0
0.0
21
34.39
0.3548
2.500
0.887
Vel = 12.766
21
18.49
1.049
1T
5.000
7.000
10.644
K Factor @ node 21
to
120
5.000
0.0
22
52.88
0.7862
12.000
9.435
Vel = 19.630
0.0
52.88
20.079
K Factor = 11.80
23
23.98
1.049
2T
5.000
6.000
18.330
K Factor = 5.60
to
120
10.000
0.0.
24
23.98
0.1821
16.000
2.913
Vel = 8.902
0.0
Computer Programs by Hydratec Inc. Route 111 Windham N.H. USA 03087
1. II IGI VGIli41G LIVI IJ - V1G114G14
Wayne Automatic Page 7
04377 SEMINOLE POWER SPORTS Date 06/24/04
Hyd. Qa Dia. Fitting Pipe Pt Pt
Ref. "C" or Ftng's Pe Pv ******* Notes
******
Point Qt Pf/UL Eqv. Ln. Total Pf Pn
Computer Programs by Hydratec Inc. Route 111 Windham N.H. USA 03087
23.98
21.243
K Factor = 5.20
25
24.89
1.049
lE
2.000
8.500
19.760
K Factor = 5.60
to
120
1T
5.000
7.000
0.0
26
24.89
0.1950
15.500
3.023
Vel = 9.240
0.0
24.89
22.783
K Factor = 5.21
27
25.97
1.049
lE
2.000
8.500
21.502
K Factor = 5.60
to
120
1T
5.000
7.000
0.0
28
25.97
0.2110
15.500
3.270
Vel = 9.641
0.0
25.97
24.772
K Factor = 5.22
14
46.00
2.203
8.500
19.147
K Factor @ node 14
to
120
0.0
0.0
16
46.0
0.0164
8.500
0.139
Vel = 3.872
16
22.88
2.203
8.500
19.286
to
120
0.0
0.0
18
68.88
0.0346
8.500
0.294
Vel = 5.798
18
23.01
2.203
8.500
19.580
to
120
0.0
0.0
22
91.89
0.0589
8.500
0.501
Vel = 7.734
22
52.88
2.203
8.500
20.081
to
120
0.0
0.0
24
144.77
0.1366
8.500
1.161
Vel = 12.185
24
23.98
2.203
8.500
21.242
to
120
0.0
0.0
26
168.75
0.1814
8.500
1.542
Vel = 14.204
26
24.89
2.203
8.500
22.783
to
120
0.0
0.0
28
193.64
0.2340
8.500
1.989
Vel = 16.299
28
25.97
2.203
1T
13.639
5.000
24.772
to
120
13.639
0.0
303
219.61
0.2953
18.639
5.504
Vel = 18.485
303
0.0
4.31
4E
13.937
145.000
30.275
to
120
1T
27.874
83.622
-4.764
401
219.61
0.0112
228.622
2.570
Vel = 4.829
401
0.0
4.31
1T
27.874
14.000
28.081
to
120
27.874
0.0
400
219.61
0.0112
41.874
0.471
Vel = 4.829
400
0.0
4.31
2E
13.937
8.000
28.552
to
120
27.874
0.217
TASR
219.61
0.0112
35.874
0.403
Vel = 4.829
TASR
0.0
4.31
1Z
13.937
23.500
29.172
to
120
13.937
9.961
BASR
219.61
0.0112
37.437
0.421
Vel = 4.829
BASR
0.0
6.357
lE
17.603
15.000
39.554
to
120
17.603
0.866
Computer Programs by Hydratec Inc. Route 111 Windham N.H. USA 03087
Computer Programs by Hydratec Inc. Route 111 Windham N.H. USA 03087
I111{AI Vf./1V
1A 1�.1 LI VI
IJ - V1U114I.A14
SPIG
219.61
0.0017
32.603
0.055
Vel =
2.220
SPIG
0.0
5.86
2E 17.893 144.000
40.475
to
150
35.785
0.0
BFP2
219.61
0.0017
179.785
0.300
Vel =
2.612
BFP2
0.0
6.34
4E 23.108 10.000
40.775
to
140
92.433
5.000
Fixed
loss = 5
BFP1
219.61
0.0013
102.433
0.132
Vel =
2.232
BFP1
0.0
6.08
5.000
45.907
to
150
0.0
0.0
HYD
219.61
0.0014
5.000
0.007
Vel =
2.427
HYD
250.00
11.68
1T 81.513 35.000
45.914
Qa =
250
to
150
1G 8.151 89.660
0.0
CITY
469.61
0.0002
124.660
0.029
Vel =
1.406
CITY
0.0
16.72
1T207.666 775.000
45.944
to
150
4F 48.712 625.534
-2.166
900
469.61
1S223.0481400.534
0.058
Vel =
0.686
900
0.0
16.72
17182.782 150.000
43.836
to
140
182.782
0.0
901
469.61
332.782
0.016
Vel =
0.686
901
0.0
16.72
1100.000
43.851
to
140
0.0
0.0
TEST
469.61
1100.000
0.051
Vel =
0.686
.0
469.61
43.902
K Factor = 70.88
Computer Programs by Hydratec Inc. Route 111 Windham N.H. USA 03087
a a
a , i n, °
Fire Protection Engineering, Inc.
222 CARTOL COURT OCOE, FL 34761
F9 (407) 877-M FAX: (407) 656-8026
Cwftate d Auf nza5m Number 7523
HYDRAULIC CALCULATIONS
Wayne Automatic
Fire Sprinklers Inc.
222 Capitol Court
Ocoee Florida 34761
407-656-3030
Job Name
:04377 SEMINOLE POWER SPORTS
Building
:REMOTE AREA -3
Location
:SANFORD FLORIDA
Design Area
:DRIVE
Contract
:04377
Data File
:0437703.WX1
Computer Programs by Hydratec Inc. Route 111 Windham N.H. USA 03087
f
Wayne Automatic Page 1
04377 SEMINOLE POWER SPORTS Date 06/24/04
Hydraulic Design Information Sheet
Name - 04377 SEMINOLE POWER SPORTS
Flow Required -
Date - 06/24/04
Location - SANFORD FLORIDA
- 41.54
AT TEST
Building - REMOTE AREA -3
C -Factor Used:
System No. - DRIVE
Contractor -
150 -
Contract No. - 04377
Calculated By - F PETERSEN
Drawing No. - FP2-FP3
Construction: ( ) Combustible (X) Non -Combustible
Ceiling Height - 13 ft.
Occupancy - EXTERIOR PARKING CANOPY
S (X) NFPA 13 ( ) Lt. Haz. Ord.Haz.Gp.
(X) 1 ( ) 2
( ) 3 ( ) Extra Haz.
Y ( ) NFPA 231 ( ) NFPA 231C ( ) Figure
-
Curve -
S Other -
T Specific Ruling - Made By -
Date -
E
M Area of Sprinkler Operation - 1610
System Type
Sprinkler or Nozzle
Density - 0.15
(X) Wet
Make - CENTRAL
D Area Per Sprinkler - 130
( ) Dry
Model - DS -1 DRY SSP
E Elevation at Highest Outlet - 13
( ) Deluge
Size - 1/2"
S Rack Sprinkler Allowance - 0
( ) Preaction K -Factor - 5.6
I Hose Allowance Inside - 0
( ) Other
Temp.Rat.- 155A
G Hose Allowance - Outside - 250
N
Note -
Calculation
Flow Required -
517.49
Press Required
- 41.54
AT TEST
Summary (
C -Factor Used:
120 -
Overhead
150 -
Underground
W Water Flow Test: Pump Data: Tank or Reservoir:
A Date of Test - 06/18/2004
T Time of Test - 0900 HRS Rated Cap.- Capacity -
E Static Press - 53 @ Press - Elevation -
R Residual Press - 48 Elevation - Well Proof Flow -
Flow - 1125
S Elevation - 5
U
P Location - SINGLE HYDRANT FLOW FROM EXISTING UNIT
P AT RINEHART AND OREGON
L Source of Information - LJ SMITH AND F PETERSEN
Y OF WAYNE AUTOMATIC FIRE SPRINKLERS, INC
C
0
M
M
S R
T A
0 C
R K
A
G
R
Commodity
Storage Ht.- ft. Area -
Storage Method: Solid Piled
( ) Single Row ( ) Conven. Pallet
( ) Double Row ( ) Slave Pallet
( ) Multi Row
Flue Spacing
Longitudinal
zontal Barriers Provided:
Class - Location -
Aisle W. -
Palletized - % Rack -
( ) Auto. Storage ( ) Encapsulate
( ) Solid Shelf ( ) Non Encaps.
( ) Open Shelf
Clearance: Storage to Ceiling
Transverse -
ft.
Wayne Automatic Page 2
04377 SEMINOLE POWER SPORTS Date 06/24/04
Computer Proarams by Hvdratec Inc. Route 111 Windham N.H. USA 03087
1451
PM
PM
Wayne Automatic Page 3
04377 SEMINOLE POWER SPORTS Date 06/24/04
Fitting Legend
Abbrev. Name
A Generic Alarm Va.
B Generic Butterfly Valve
C Roll Groove Coupling
D Dry Pipe Valve
E 90' Standard Elbow
F 45' Elbow
G Gate Valve
H POZ-LOK 90
I POZ-LOK TEE
J Angle Valve
K Detector Check Valve
L Long Turn Elbow
M Medium Turn Elbow
N Mechanical Tee
Q Flow Control Valve
R CPVC ST TEE
S Swing Check Valve
T 90' Flow thru Tee
U CPVC 90
V CPVC TEE
W Wafer Check Valve
X CPVC 45
Y CPVC COUP -STRAIGHT TEE
Z Flow Switch
Computer Programs by Hydratec Inc. Route 111 Windham N.H. USA 03087
5 6 8 10 12 14 16 18 20 24
A
17.0
27.0
29.0
B
9.0
10.0
12.0
19.0
21.0
Wayne
Automatic
C
1.0
1.0
1.0
1.0
1.0
Page
4
04377
SEMINOLE POWER
SPORTS
D
47.0
Date
06/24/04
Unadjusted Fittings
Table
E
12.0
14.0
18.0
22.0
27.0
1/2 3/4
1
1 1/4
1 1/2
2
2 1/2
3
3 1/2
4
11.0
13.0
17.0
19.0
21.0
24.0
28.0
G
A
3.0
4.0
5.0
6.0
7.0
7.7
21.5
11.0
17.0
B
7.0
10.0
12.0
C
1.0 1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
D
J
71.0
9.5
17.0
28.0
E
2.0 2.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
10.0
F
1.0 1.0
1.0
1.0
2.0
2.0
3.0
3.0
3.0
4.0
G
27.0
30.0
34.0
40.0
1.0
1.0
1.0
1.0
2.0
H
2.0
3.0
4.0
N
I
5.0
7.0
8.0
Q
33.0
J
15.0
19.0
23.0
29.0
35.0
43.0
R
57.0
K
14.0
14.0
L
1.0 1.0
2.0
2.0
2.0
3.0
4.0
5.0
5.0
6.0
M
2.0
2.0
3.0
3.0
4.0
5.0
6.0
6.0
8.0
N
2.0 4.0
5.0
6.0
8.0
10.5
12.5
15.5
22.0
Q
V
18.0
29.0
35.0
R
1.0
1.0
1.0
1.0
1.0
2.0
2.0
27.4
S
4.0 5.0
5.0
7.0
9.0
11.0
14.0
16.0
19.0
22.0
T
3.0 4.0
5.0
6.0
8.0
10.0
12.0
15.0
17.0
20.0
U
4.0
5.0
6.0
7.0
9.0
12.0
13.0
14.0
18.0
V
3.0
5.0
6.0
8.0
10.0
12.0
15.0
W
10.3
X
1.0
1.0
2.0
2.0
2.0
3.0
4.0
Y
1.0
1.0
1.0
1.0
1.0
2.0
2.0
Z
2.0 2.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
10.0
5 6 8 10 12 14 16 18 20 24
A
17.0
27.0
29.0
B
9.0
10.0
12.0
19.0
21.0
C
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
D
47.0
E
12.0
14.0
18.0
22.0
27.0
35.0
40.0
45.0
50.0
61.0
F
5.0
7.0
9.0
11.0
13.0
17.0
19.0
21.0
24.0
28.0
G
2.0
3.0
4.0
5.0
6.0
7.0
8.0
10.0
11.0
13.0
H
I
J
71.0
K
36.0
55.0
45.0
L
8.0
9.0
13.0
16.0
18.0
24.0
27.0
30.0
34.0
40.0
M
10.0
12.0
16.0
19.0
22.0
N
Q
33.0
R
s
27.0
32.0
45.0
55.0
65.0
76.0
87.0
98.0
109.0
130.0
T
25.0
30.0
35.0
50.0
60.0
71.0
81.0
91.0
101.0
121.0
U
V
W
13.1
31.8
35.8
27.4
X
Y
Z
12.0
14.0
18.0
22.0
27.0
35.0
40.0
45.0
50.0
61.0
Computer Programs by Hydratec Inc. Route 111 Windham N.H. USA 03087
I %,%J%JuI i I wrr %JU I 1 11 1 1 .1 �r - v � i v•
Wayne Automatic Page 5
04377 SEMINOLE POWER SPORTS Date 06/24/04
Node
No.
Elevation
K -Fact
Pt
Actual
Pn
Flow Density Area Press
Actual Reg.
D29
13.0
5.6
11.21
na
18.75 .15 125 7.0
29
14.0
K =
K @
29
11.53
na
18.75
30
14.0
K =
K @
29
11.64
na
18.84
31
14.0
K =
K @
29
12.04
na
19.17
32
14.0
K =
K @
29
12.91
na
19.84
33
14.0
K =
K @
29
14.42
na
20.97
34
14.0
K =
K @
29
16.78
na
22.62
35
14.0
K =
K @
29
11.74
na
18.92
36
14.0
K =
K @
29
11.86
na
19.01
37
14.0
K =
K @
29
12.27
na
19.34
38
14.0
K =
K @
29
13.15
na
20.02
39
14.0
K =
K @
29
14.68
na
21.16
40
14.0
K =
K @
29
17.09
na
22.83
41
14.0
K =
K @
29
22.17
na
26.0
304
14.0
22.09
na
305
14.0
22.48
na
306
14.0
27.3
na
401
25.5
24.9
na
400
25.5
25.58
na
TASR
25.0
26.38
na
BASR
2.0
36.94
na
SPIG
0.0
37.89
na
BFP2
0.0
38.32
na
BFP1
0.0
43.51
na
HYD
0.0
43.52
na
250.0
CITY
0.0
43.56
na
900
5.0
41.46
na
901
5.0
41.48
na
TEST
5.0
41.54
na
The maximum velocity is 16.59 and it occurs in the pipe between nodes 40 and 305
Computer Programs by Hydratec Inc. Route 111 Windham N.H. USA 03087
1 -n iai v01%,UIauvI w - .JLai ivai u
Wayne
Automatic
Page 6
04377
SEMINOLE
POWER SPORTS
Date 06/24/04
Hyd.
Qa
Dia.
Fitting
Pipe
Pt Pt
Ref.
"c"
or
Ftng's
Pe Pv
******* Notes
******
Point
Qt
Pf/UL
Eqv. Ln.
Total
Pf Pn
D29
18.75
1.049
1T 5.000
1.500
11.211
K Factor = 5.60
to
120
5.000
-0.433
29
18.75
0.1155
6.500
0.751
Vel = 6.960
0.0
18.75
11.529
K Factor = 5.52
29
18.75
1.728
11.000
11.528
K Factor @ node
29
to
120
0.0
0.0
30
18.75
0.0102
11.000
0.112
Vel = 2.565
30
18.84
1.728
11.000
11.640
K Factor @ node
29
to
120
0.0
0.0
31
37.59
0.0368
11.000
0.405
Vel = 5.143
31
19.17
1.728
11.000
12.045
K Factor @ node
29
to
120
0.0
0.0
32
56.76
0.0788
11.000
0.867
Vel = 7.765
32
19.84
1.728
11.000
12.912
K Factor @ node
29
to
120
0.0
0.0
33
76.6
0.1373
11.000
1.510
Vel = 10.479
33
20.97
1.728
11.000
14.422
K Factor @ node
29
to
120
0.0
0.0
34
97.57
0.2148
11.000
2.363
Vel = 13.348
34
22.63
1.728
1T 11.290
5.500
16.785
K Factor @ node
29
to
120
11.290
0.0
304
120.2
0.3160
16.790
5.305
Vel = 16.444
0.0
120.20
22.090
K Factor = 25.57
35
18.92
1.728
11.000
11.742
K Factor @ node
29
to
120
0.0
0.0
36
18.92
0.0104
11.000
0.114
Vel = 2.588
36
19.02
1.728
11.000
11.855
K Factor @ node
29
to
120
0.0
0.0
37
37.94
0.0375
11.000
0.412
Vel = 5.190
37
19.34
1.728
11.000
12.267
K Factor @ node
29
to
120
0.0
0.0
38
57.28
0.0802
11.000
0.882
Vel = 7.836
38
20.02
1.728
11.000
13.149
K Factor @ node
29
to
120
0.0
0.0
39
77.3
0.1396
11.000
1.536
Vel = 10.575
39
21.17
1.728
11.000
14.685
K Factor @ node
29
to
120
0.0
0.0
40
98.47
0.2185
11.000
2.403
Vel = 13.471
40
22.82
1.728
1T 11.290
5.500
17.088
K Factor @ node
29
to
120
11.290
0.0
305
121.29
0.3213
16.790
5.394
Vel = 16.593
0.0
121.29
22.482
K Factor = 25.58
Computer Programs by Hydratec Inc. Route 111 Windham N.H. USA 03087
1 IIIQI VQIVUI0l1U110 - JIQIlUQ1U
Wayne Automatic Page 7
04377 SEMINOLE POWER SPORTS Date 06/24/04
Hyd. Qa Dia. Fitting Pipe Pt Pt
Ref. "C" or Ftng's Pe Pv ******* Notes
******
Point Qt Pf/UL Eqv. Ln. Total Pf Pn
41
26.00
1.728
1T
11.290
5.500
22.171
K Factor @ node 29
to
120
11.290
0.0
305
26.0
0.0186
16.790
0.312
Vel =
3.557
0.0
26.00
22.483
K Factor
= 5.48
304
120.20
2.703
11.000
22.090
to
120
0.0
0.0
305
120.2
0.0357
11.000
0.393
Vel =
6.721
305
147.29
2.703
1T
18.651
12.000
22.483
to
120
18.651
0.0
306
267.49
0.1571
30.651
4.814
Vel =
14.956
306
0.0
4.31
4E
13.937
76.000
27.297
to
120
1T
27.874
83.622
-4.981
401
267.49
0.0162
159.622
2.584
Vel =
5.882
401
0.0
4.31
1T
27.874
14.000
24.901
to
120
27.874
0.0
400
267.49
0.0162
41.874
0.678
Vel =
5.882
400
0.0
4.31
2E
13.937
8.000
25.579
to
120
27.874
0.217
TASR
267.49
0.0162
35.874
0.581
Vel =
5.882
TASR
0.0
4.31
1Z
13.937
23.500
26.376
to
120
13.937
9.961
BASR
267.49
0.0162
37.437
0.606
Vel =
5.882
BASR
0.0
6.357
lE
17.603
15.000
36.944
to
120
17.603
0.866
SPIG
267.49
0.0025
32.603
0.080
Vel =
2.704
SPIG
0.0
5.86
2E
17.893
144.000
37.889
to
150
35.785
0.0
BFP2
267.49
0.0024
179.785
0.431
Vel =
3.182
BFP2
0.0
6.34
4E
23.108
10.000
38.321
to
140
92.433
5.000
Fixed
loss = 5
BFP1
267.49
0.0019
102.433
0.190
Vel =
2.718
BFP1
0.0
6.08
5.000
43.511
to
150
0.0
0.0
HYD
267.49
0.0020
5.000
0.010
Vel =
2.956
HYD
250.00
11.68
1T
81.513
35.000
43.521
Qa =
250
to
150
1G
8.151
89.660
0.0
CITY
517.49
0.0003
124.660
0.035
Vel =
1.550
CITY
0.0
16.72
1T207.666
775.000
43.557
to
150
4F
48.712
625.534
-2.166
900
517.49
15223.0481400.534
0.069
Vel =
0.756
900
0.0
16.72
1T182.782
150.000
41.460
to
140
182.782
0.0
901
517.49
0.0001
332.782
0.019
Vel =
0.756
901
0.0
16.72
1100.000
41.479
to
140
0.0
0.0
Computer Programs by Hydratec Inc. Route 111 Windham N.H. USA 03087
I
i. -Ji Ia1 vawuiauui w - vLa1 ivai u
MvI-M C1`7 no n nnn1
1100.0000.062 Vel = 0.756
.0
517.49 41.541 K Factor = 80.29
Computer Programs by Hydratec Inc. Route 111 Windham N.H. USA 03087
SEMINOLE POWER SPORTS
SANFOR , FLORIDA
RC�6��.
J U L 7000
. v WAY N. E,
Automatic Fire Sprinklers, Inc..
CORPORATE OFFICE
222 CAPITOL COURT • OCOEE, FLORIDA 34761-3033
407-656-3030 • FAX: 407-656-8026
EMERGENCY. 407-656-8946
REGIONAL OFFICE
2321 BRUNER LANE
FORT MYERS, FLORIDA 33912-1904
239-433-3030 • FAX: 239-433-3263
REGIONAL OFFICE
4370 MOTORSPORT DR.
CONCORD, NORTH CAROLINA 28027-8977
704-782-3032 • FAX: 704-795-6838
REGIONAL OFFICE
11326 DISTRIBUTION AVENUE, WEST
JACKSONVILLE, FLORIDA 32256-2745
904-268-3030 • FAX: 904-268-0724
REGIONAL OFFICE
3121 N.W. 16' TERRACE
POMPANO BEACH, FLORIDA 33064
954-917.3030 • FAX: 954-917-9424
mWO A
Automatic Fire Sprinklers, Inc.
FIRE SPRINKLER
EQUIPMENT DATA SUBMITTAL
r-
SEMINOLE POWER SPORTS
SANFORD, FLORIDA
WAFS Project No. 04377
CONTENTS
1.
Pipe
2.
Fittings
3.
Valves
4.
Hangers
5.
Sprinklers
6.
Misc. & Electrical
tq`3' ,xs t°'i r y�i «srx• t... w, .ae rj'a�-- w +.
tv
4C 11.111-1
41,
oik
Al
!A •:`-5-
} tik 4 7
^�'� . �,�� �d F ,� �"��^r� '
-MIC a P _ '� • ■� �R 4 T � f:
R fig° ,
.t f , �• „z.: jF.t ,+ a .. z r -f aY .�# a Sy a 'Ji`,t'..
TO
Av
Of
�roxs of s '-'� T,. 'i �" r �c r ' r' «r ria
�-
i s s
� it " �
IV
A041 -M a
s
p WW
OF Awe
ME Z
' •+Y �."+'S` 4t � a ate'" �� _ ` '� 7�g 5` a d,^'e.�'� v° `� � ' � 4 bh� '�a ,
e$,
riFia y._
, , r
Yg
r
"� x �"✓,.
'A
� a�spp• 5 A ��' � $� �� �'"s� - ^ j � y �: il� }, � � �r �* �`�',_, :-:
ca s', ". % .d`. •'e x «Its a ,
Ile
�F x; s d�__ A ` a y
f �
.i.,
k
so
gg
VW
r
oi,
6g,
4W�
°6,1.3 �.MEN j � .
(d zsy, ' r .n 5.rz"•3' a. -
'a n�•+"a'
n ..��..�� �, ,�:.u'.t �, w F ,�• a ��.. +.mow a�; � „� �^n � t� *� "'si't � ` � �1,�, 4,=;. _ ur��'�,l,.s{' ,�'Y,�.t�z,�' �,.
d eYr"tY ,<r '•Xyo ,<sa,+b-S ✓ 9Mi uk'' f ' e '- �k 9i- ia3 _ k �j
k caRr «pp +� z �� �m 6, �.>6� �� �I Ysv:��� "z�,{«:� $ ,� =f .* �Y �: x�•'�t�'#`���I�. �, ,,t y�y��`$ r�, '.���- +�' :f'� .Y .�,� "�, �-�_„ 9�I.' «'z�,^"�.�y j.--a`�Y+t�r('!,.
$ - ��µµ �„.� .,g{ i r� "gfag ,,�{ i"l•: rb'•: 's 4r y�n;4' ya". ,, 4" � t��., •4` •�� fir•
. ��^�t" �„ moi ���t �� mai.. � ��•�r,�?,��� of _ " �`� �,�����*��;�� ��,��m � ��d'y�r��.�„ ���� ���r• z"Y �� ��*} '*�" � �d a�f` � ., m
i
co influenced, a
rrosi n rdc ss infl ence d , or c used�by,
C res a _.
- microbiological-organisms;called mi'crobes.and is amajor
W
use ouberculation„pitting,and-subsequent pipe failure inf re=
tmkl r ystems These organisms, along with tuberculation and
corrosion, cause, pinhole Peaks' in carbonsteel; copper antd gelva-
nized pipe systems.
' WNF:
r°
iyy ; Fire sprinkler systems=provide a favorable'environmenf for the `>
Microbiologically Influenced: F. growth ,and developmer�t,of`bacteria resulting in MIC failures, as
;� reco nized b membersof the AFSA NFPA NFS`A nNACE, s rrnkler
I Corrosion (MIC) is more4cort�- g Y p
}� manufacturers `end use s and firep
rotection service/mechanical
plicated than` other typesdf"-
3 ��,-, contractors working within the industry. TM
i corrosion because ofits rajiid
growth rate';and coristarat�fs The bacteria are ether aerobic
(i.e., thrive, In. oxygen) or anaerobic
reoccurrence Often sprinkler,..
� � r (inhibited or,,die when,exposed . I
contractors to oxygen) ..Aerobic -micro -
remedied byrepl�aci, g� P or anisms and their
Sulphide Produced Metal PI g
�h� eioflim ugid� as secretions on wetted'pipe
infected pipe but ih�s�s'no� .sui=faces leads to theformation
% Locslixd Corroalan
longer thecase� ��,�� ,,-
�` of biofilms,(which frequently become
duded,with;iron, stile, oil, dirt and other j
��gxs�d@TIS�htl fllfra adheres to these metal
�surfaest�os'agel-like mass aroud`
4+Q �bateIeCaoSitvvhich promotes th� A
rPOW
��formatron of differential oxygen cell,
'd�c'�
rtr i resistance
-
�` �opization of�pip'e ��..
-q#C when the Firkler
bystem isfirst ins 11 -d
� � � ABF4will be app ie*to,'the interior>surface�of atl�Al jed Tubab
Conduit sprinkler pip prod up to 4.5 inch s`iff ,
E
" e' ucts ,e
�p7 Jameter-' excluding hot-dipog Iva # ” y
°a �nie
e
� ti� k
Rin # Anaerobic bacteria, such as the class Desulfovibrio iesufuncans,
r (sulfate reducers) and aciclfproducefs seek out and colonize beneath', ,
the spotty biofilms 'sfime: layers),udder debris, or inside �
tt �'en orous
P ttY CP .
ky, tubercles where k*environme is:defac� tror.;devoid,o£ozygen 4,�,
These bacteria produce metaLsuVideskas corrosion prod and
when exposed,to a,or hydrochloric a d, the rotten�egdor of
_.
{ r x x
hydrogen sulfide(H25),.s easil�i�etetted'Sulfate,r gbaGtecia
x .,i gil
(SRB) is a ,typical,example of an ero6i MlC and'can �a�ise ra id
W fi�
black colo ed Ovate freq e� L found n- res ink r sy dem rid
P g a d YS,o
� s `
Aerobic�suifur oxidizin ba eri if the typejthiobac Ius can create
9
f�
amenvironment gO up o�tfi% suhfunc acid ereby creating rapier
corrosion. Talon . re dial action wilk prevent fUrt er system
�, - r a
damage caused5W MIC
i ;r1 as i� y LS P' riga n"' F
c;5`�°.v1,'"' ik�"'i`*m'� >"' ib. • e ' r�rrrtt+x +°✓''� y. k{
UP—At.
n allied
TUBE & CONDUIT
Fire Sprinkler Pipe Product Approvals
Product Name
Size Range*
Approvals
ASTM Standards
Dyna -Flow®
:1"- 4"
UL FM ULC
A-795
Dyna -Thread®
1"- 2"
UL FM ULC
A-135
BLT®/XL®
1"- 2"(*21/211, 3")
UL FM ULC
A-135
Schedule -10®
11/411-811
UL ** FM
A-135
Schedule -40®
J-11- 21/211
UL * * FM
A -135/A-795
* XL only
*Allied Tube & Conduit may offer additional sizes and schedules of sprinkler pipe that are outside of our
manufacturing capacity. These products are sold under license from other domestic pipe manufactures,
and all meet NFPA 13 and appropriate ASTM standards, and are UL listed and FM approved.
*Schedule-10/Schedule-40 steel pipe do not need to be separately UL listed or FM approved provided
they meet appropriate ASTM standards. Allied Tube & Conduit manufacturers to offer UL/FM standards
for Schedule-10/Schedule-40 pipe to assure consistent quality and reliability.
Allied Tube & Conduit has manufacturing locations in Phoenix, AZ, Harvey, IL and Philadelphia, PA, besides
administering the exclusive production of some pipe products at other mills. Certifications of specification
and origin are available upon request. All pipe products from Allied Tube & Conduit can be ordered "hot-
dip" galvanized, (per ASTM A-123), for dry system use. Advance notice and minimum orders
are required.
The majority of popular fittings and couplings are UL listed and FM approved for use with the above pipe
products. Any questions regarding their listings compatibility with our sprinkler pipe may be found by
referencing the listing agency's literature, or by contacting the manufacturer of the fitting in question.
The following two pages are taken from the 1996 Edition of NEPA Pamphlet # 13 and refer to both
pipe and fittings. -
S5-2
nynawThreld�
Full Line Sch-40 Replacement
Dyna-ThreacP offers the life expectancy of Sch-40 with superior hydraulics and greater value.
Dyna -Thread sprinkler pipe represents an engineering advancement for the sprinkler pipe industry. It combines the safety
and longevity of traditional Sch-40 pipe with quality and superior hydraulic advantages.
0.
• Dyna -Thread's inside diameter is up
to 3.6% larger than Sch-40 giving it
superior hydraulics. And, when used
in combination with Dyna -Flow pipe,
down sizing often occurs.
• Dyna -Thread is fully listed and
approved by UL, ULC, and FM for
fire sprinkler applications.
• The life expectancy of Dyna -Thread
and Sch40 are equal based on the
calculated wall thicknesses per UL.
• The consistent quality of steel used to
make Dyna -Thread facilitates smooth
threading and lower maintenance
costs.
• The exterior of Dyna -Thread is
protected by a clean, durable mill
coating for extended shelf life and
easy paint application.
V
<FM>ULC
Listed Approved Listed
• With its increased strength and lighter
weight, Dyna -Thread reduces
installation fatigue and is ideal for
retro -fit applications.
Corrosion Resistance Ratio (CRR) is a
UL (Underwriters Laboratory) term for
the estimated life expectancy of a pipe
joint. This is based on the calculated
wall thickness at the base of the first
exposed thread, assumed to be the
weakest point of the pipe length. Dyna -
Thread and Sch40 have the same
calculated wall thicknesses at this point
and are both assigned the same CRR of
1.00.
The internal surface of all black Allied
Tube & Conduit Fire Sprinkler pipe
products up to 4.5000" in diameter is
coated with our new Antibacterial
Formula, `ABF". In scientific laboratory
test, ABS proved to have superior
resistance to microbial colonization of
pipe walls, thereby delaying or possibly
preventing the onset of
Microbiologically Influenced corrosion
(MIC) when the First Sprinkler System
is first installed.
• More wall thickness at the thread
(CRR=1.00) gives Dyna -Thread
better life expectancy than lightwall
threadable pipe joints.
• Unlike lightwall threadable pipe,
Dyna -Thread has no thread gauge
warning.
• Dyna -Thread is approved for
standard hanger spacing (15 ft.
O.C.), can be used as earthquake
sway bracing, and is safe to use as
drops.
• Dyna -Thread is safer to weld on.
• Dyna -Thread is more widely
accepted than lightwall threadable
where Sch-40 is specified.
Super 40/Dyna-Thread pipe is
manufactured to meet: ASTM A-135,
Grade A and is in compliance with
NFPA-13. All sizes of Super 40/Dyna-
Thread are rated at 300 psi working
pressure. Super 40/Dyna-Thread is UL
and ULC Listed for wet, dry deluge and
pre -action sprinkler systems and FM
Approved for use in wet systems. Super
40/Dyna-Thread can be "hot -dip"
galvanized to meet FM requirement for
dry systems. Super 40/Dyna-Thread is
approved for all threaded couplings and
welded outlets and is suitable for all
roll -grooved, and plain -end fittings.
(See listing information).
tgco Flow Controln 16100 S. Lathrop • Harvey, IL 60426 . Customer Service:
`-/ allied 11350 Norcom Rd. • Philadelphia, PA 19154 (800) 882-5543
TUBE & CONDUIT 2525 N. 27 th Ave. • Phoenix, AZ 85009 Fax 708-339-1806
S3-3
NPS
In; mm
Nominal I.D.
In; mm
Wt.
Lbs/ft,Kg/m
Wt. (H20 Filled)
Lbs/Ft; Kg/m
Pcs/ WVLIft (21')
Lift Lbs; Kg
WHLIH (24')
Lbs; Kg
WVLIft (25'
Lbs; Kg
1'
1.080
1.330
1.75
70
1955
2234
232
25
27.4
2.0
2.60
70
887
1013
105
1'/;
1.408
1.870
2.54
51
2002
2288
2384
32
35.8
2.8
3.78
51
908
1038
108
1'/z'
1.639
2.290
3.22
44
2115
2418
2519
40
41.6
3.4
4.79
44
959
1097
114
2'
2.104
3.050
4.57
30
1921
2196
228
50
53.4
4.5
6.80
30
871
996
103
• More wall thickness at the thread
(CRR=1.00) gives Dyna -Thread
better life expectancy than lightwall
threadable pipe joints.
• Unlike lightwall threadable pipe,
Dyna -Thread has no thread gauge
warning.
• Dyna -Thread is approved for
standard hanger spacing (15 ft.
O.C.), can be used as earthquake
sway bracing, and is safe to use as
drops.
• Dyna -Thread is safer to weld on.
• Dyna -Thread is more widely
accepted than lightwall threadable
where Sch-40 is specified.
Super 40/Dyna-Thread pipe is
manufactured to meet: ASTM A-135,
Grade A and is in compliance with
NFPA-13. All sizes of Super 40/Dyna-
Thread are rated at 300 psi working
pressure. Super 40/Dyna-Thread is UL
and ULC Listed for wet, dry deluge and
pre -action sprinkler systems and FM
Approved for use in wet systems. Super
40/Dyna-Thread can be "hot -dip"
galvanized to meet FM requirement for
dry systems. Super 40/Dyna-Thread is
approved for all threaded couplings and
welded outlets and is suitable for all
roll -grooved, and plain -end fittings.
(See listing information).
tgco Flow Controln 16100 S. Lathrop • Harvey, IL 60426 . Customer Service:
`-/ allied 11350 Norcom Rd. • Philadelphia, PA 19154 (800) 882-5543
TUBE & CONDUIT 2525 N. 27 th Ave. • Phoenix, AZ 85009 Fax 708-339-1806
S3-3
ii 1
T
ale
i
r
DynamFlow@
Nigh Strength Steel Pipe
The original high-strength lightwall sprinkler pipe with hydraulics superior to Schedule -10.
Dyna -Flow pipe is the "original" high-
strength lightwall sprinkler pipe. Dyna -
Flow has outstanding hydraulic
capabilities and is recognized as the
most popular alternative to Schedule -10
pipe. Lightweight, easy to cut and easy
to handle for installation. Dyna -Flow is a
valuable addition to any fire protection
system.
Superior Hydraullcs.,..
With an inside diameter of up to 11%
larger than Schedule -40 and up to 7%
larger than Schedule -10, Dyna -Flow
pipe hydraulics are exceptional. Larger
I.D.s enable Dyna -Flow, and related
components, to be down -sized within the
system, thus increasing the potential for
job cost savings. For complete Hazen -
Williams charts, refer to "Dyna -Flow
Hydraulic Data Tables."
Additional -96nefits
Dyna -Flow products are coated with Dyna-Flow/Super Flo pipe is manufac- Lightweight and easy to install,
an environmentally approved and tured to meet ASTM A-795 Type E, resulting in more efficient use of your
specially formulated modified -acrylic or Grade A and is in compliance with freight and labor dollars.
water-based coating. This durable coating NFPA-13 and NFPA-l4. All sizes of
is paintable. The black coating acts as Dyna Flow/Super Flo are UL Listed, FM
an excellent primer and is resistant to Approved and ULC Listed.
weathering and U.V. degradation from
outdoor storage.
Metallurgical properties provide excellent
fabrication characteristics for end prep
finishes, welding and roll grooving.
There is no special process or equipment
needed for fabrication and installation.
The internal surface of all black Allied
Tube & Conduit Fire Sprinkler pipe
products up to 4.5000" in diameter is
coated with our new Antibacterial
Formula, "ABF". In scientific laboratory
test, ABS proved to have superior
resistance to microbial colonization of
pipe walls, thereby delaying or possibly
preventing the onset of Microbiologically
Influenced corrosion (MIC) when the
First Sprinkler System is first installed.
tqc®/Flow Control
Listed Approved Listed
Dyna-Flow/Super Flo is UL/ULC Listed
for use with roll grooved, plain -end
couplings, and welded joints for wet, dry,
preaction and deluge systems. It is FM
Approved for roll grooved, plain -end, and
welded joints for wet systems. Refer to
appropriate documentation for up-to-date
listing and approval information. Dyna-
Flow/Super Flo is now available "hot-
dip" galvanized and has been specifically
approved by FM for dry systems uses.
• Provides stability needed to comply
with standard hanger spacing
(15 ft O.C.) per NFPA.
• Available in Standard lengths for your
convenience, or can be ordered in
custom lengths upon approval.
• Fast cutting and welding, as. well as
easy roll grooving and end preparation.
• Available in Factory roll grooved form
for quicker shop turnaround.
• Clean, durable mill coating provides
longer "shelf life" and acts as an
excellent primer for custom paint
applications.
allied16100 S. Lathrop • Harvey, IL 60426 Customer Service:
7 11350 Norcom Rd. • Philadelphia, PA 19154 (800) 882-5543
TUBE & CONDUIT 2525 N. 27 th Ave. • Phoenix, AZ 85009 Fax 708-339-1806
S2-3
NPS
Nominal I.D.
Wt.
Wt. (1120 Filled)
Pcs/
Wt/Lift (21')
WVLitt (24')
WVLitt (25'
In; mm
In; mm
Lbs/Ft; Kg/m
Lbs/Ft,- Kg/m
Lift
Lbs; Kg
Lbs; Kg
Lbs; Kg
1"
1.191
0.830
1.31
91
1,586
1,812
1,888
25
30.3
1.2
1.95
91
719
822
856
1'/<'
1.536
1.059
1.87
61
1,356
1,550
1,615
32
39.0
1.6
2.78
61
615
703
733
1'/2'
1.728
1.667
2.71
61
2,135
2,440
2,542
40
43.9
2.5
4.03
61
968
1107
1153
2'
2.203
2.104
3.79
37
1,634
1,868
1,946
50
56.0
3.1
5.64
37
741
847
883
21/2"
2.703
2.564
5.10
30
1,615
1,846
1,923
65
68.7
3.8
7.59
30
733
837
872
T
3.314
3.387
7.18
19
1,351
1,544
1,608
80
84.2
5.0
10.69
19
613
700
729
4'
4.310
4.473
10.86
19
1,784
2,039
2,124
90
109.5
6.7
16.16
19
809
925
963
Additional -96nefits
Dyna -Flow products are coated with Dyna-Flow/Super Flo pipe is manufac- Lightweight and easy to install,
an environmentally approved and tured to meet ASTM A-795 Type E, resulting in more efficient use of your
specially formulated modified -acrylic or Grade A and is in compliance with freight and labor dollars.
water-based coating. This durable coating NFPA-13 and NFPA-l4. All sizes of
is paintable. The black coating acts as Dyna Flow/Super Flo are UL Listed, FM
an excellent primer and is resistant to Approved and ULC Listed.
weathering and U.V. degradation from
outdoor storage.
Metallurgical properties provide excellent
fabrication characteristics for end prep
finishes, welding and roll grooving.
There is no special process or equipment
needed for fabrication and installation.
The internal surface of all black Allied
Tube & Conduit Fire Sprinkler pipe
products up to 4.5000" in diameter is
coated with our new Antibacterial
Formula, "ABF". In scientific laboratory
test, ABS proved to have superior
resistance to microbial colonization of
pipe walls, thereby delaying or possibly
preventing the onset of Microbiologically
Influenced corrosion (MIC) when the
First Sprinkler System is first installed.
tqc®/Flow Control
Listed Approved Listed
Dyna-Flow/Super Flo is UL/ULC Listed
for use with roll grooved, plain -end
couplings, and welded joints for wet, dry,
preaction and deluge systems. It is FM
Approved for roll grooved, plain -end, and
welded joints for wet systems. Refer to
appropriate documentation for up-to-date
listing and approval information. Dyna-
Flow/Super Flo is now available "hot-
dip" galvanized and has been specifically
approved by FM for dry systems uses.
• Provides stability needed to comply
with standard hanger spacing
(15 ft O.C.) per NFPA.
• Available in Standard lengths for your
convenience, or can be ordered in
custom lengths upon approval.
• Fast cutting and welding, as. well as
easy roll grooving and end preparation.
• Available in Factory roll grooved form
for quicker shop turnaround.
• Clean, durable mill coating provides
longer "shelf life" and acts as an
excellent primer for custom paint
applications.
allied16100 S. Lathrop • Harvey, IL 60426 Customer Service:
7 11350 Norcom Rd. • Philadelphia, PA 19154 (800) 882-5543
TUBE & CONDUIT 2525 N. 27 th Ave. • Phoenix, AZ 85009 Fax 708-339-1806
S2-3
'ip my
"or
6�1
-4,
All,
ied;,
L
TUBE & CONDUIT'
:Nis
74
44,
w,4
a
MIMI,
2
me
Aq.
bf
Y� all.
tP,
Zp
m
tk
Arl
cin
d9
;IF
rr
14
0 U-,
�O
_4
All
dut--z'00
dut- U
Fully Listed and FM Approved Sprinkler Pipe
When you specify Schedule- 10 /Schedule -40 sprinkler pipe you get a UL listed and FM approved product. Although these
products do not require separate approvals, Schedule- I O/Schedule-40 gives you the extra quality assurance you demand.
Our Sch-10 (1'/4"- 8") pipe and Sch-40 (P- 2/2") pipe have passed the same thorough lab testing as our other listedpipe
products, and receive periodic mill inspections from both UL and FM agents to ensure consistent quality.
%Nell yd"lAt:!�,!71pe Sch! P Speeffic -------
Schedule- I O/Schedule-40 product can be
"hot -dip" galvanized to meet FM
requirements for dry systems in
accordance with the zinc coating
specifications of ASTM A- 123.
3eriar C�&;fflnr
Our advanced formula mill coating of-
fers a clean, durable surface. It is also
paint -ready for custom color applications
without special preparation.
The internal surface of all black Allied
Tube & Conduit Fire Sprinkler pipe
products up to 4.5000" in diameter is
coated with our new Antibacterial For-
mula, "ABF". In scientific laboratory
test, ABS proved to have superior resis-
tance to microbial colonization of pipe
walls, thereby delaying or possibly pre-
venting the onset of Microbiologically
Influenced corTosion (MIC) when the
First Sprinkler System is first installed.
-.imeirican i4i.acie
Meets "Buy American" requirement
and is available through distributors in
the USA, Canada and Mexico.
SplecificatJons & Approvals
Schedule- I O/Schedule-40 pipe are in
compliance with the following:
ASTM A-] 3 5, and NFPA 13. Both pipe
products have a working pressure rating
of 300 psi maximum and also meet the
stringent requirement for the following
tests:
• Welded Outlets
• Hydrostatic Pressure
• Side Wall Rupture
• Vibration Test
ch
11 Specii
lica
lionsl
11350 Norcom Rd. - Philadelphia, PA 19154
(800) 882-5543
NPS
Nominal I.D.
Wt.
Wt. (1120 Filled)
Pcs/
WVL!h(211)
WVLlft(24')
WVLift(25-1
In, mm
In; mm
LbslFt; Kg1m
Lbsln; K91M
Lift
Lbs; Kg
Lbs; Kg
Lbs; Kg
1.
1.049
1.680
2.05
70
2,470
2,822
2,940
25
26.6
2.5
3.05
70
1,120
1,280
1,334
11/4 *
1.380
2.270
2.93
51
2,431
2,778
2,894
32
35.1
4.36
4.36
51
1,103
1,260
1,313
11/2"
1.610
2.720
3.61
44
2,513
2,872
2,992
40
40.9
4.0
5.37
44
1,140
1,303
1,357
2'
2.067
3.650
5.13
30
2,300
2,628
2,738
50
52.5
5.4
763
30
1,043
1,192
1,242
21/2'
2.469
5.790
5.89
19
2,310
2,640
2,750
65
62.7
8.6
11.73
19
1,048
1,197
1,247
%Nell yd"lAt:!�,!71pe Sch! P Speeffic -------
Schedule- I O/Schedule-40 product can be
"hot -dip" galvanized to meet FM
requirements for dry systems in
accordance with the zinc coating
specifications of ASTM A- 123.
3eriar C�&;fflnr
Our advanced formula mill coating of-
fers a clean, durable surface. It is also
paint -ready for custom color applications
without special preparation.
The internal surface of all black Allied
Tube & Conduit Fire Sprinkler pipe
products up to 4.5000" in diameter is
coated with our new Antibacterial For-
mula, "ABF". In scientific laboratory
test, ABS proved to have superior resis-
tance to microbial colonization of pipe
walls, thereby delaying or possibly pre-
venting the onset of Microbiologically
Influenced corTosion (MIC) when the
First Sprinkler System is first installed.
-.imeirican i4i.acie
Meets "Buy American" requirement
and is available through distributors in
the USA, Canada and Mexico.
SplecificatJons & Approvals
Schedule- I O/Schedule-40 pipe are in
compliance with the following:
ASTM A-] 3 5, and NFPA 13. Both pipe
products have a working pressure rating
of 300 psi maximum and also meet the
stringent requirement for the following
tests:
• Welded Outlets
• Hydrostatic Pressure
• Side Wall Rupture
• Vibration Test
tqculftw Control Qv- allied
TUBE & CONDUIT
ch
11 Specii
lica
lionsl
11350 Norcom Rd. - Philadelphia, PA 19154
(800) 882-5543
NPS
Nominal 1.0.
Wt.
Wt. (11120 Filled)
Pcs/
WKift (21')
Milt (24.)
WV11ft (25.]
In; mm
In; mm
LbsVFt,,Kg1m
Lb&1Ft,-Kg1m
Lift
Lbs, Kg
Lbs; Kg
Lbs; Kg
V
1.097
1.400
1.81
91
2,675
3,053
3,185
25
279
2.1
2.70
91
1,213
1,385
1,445
11/4'
1.442
1.810
2.52
61
2,319
2,664
2,760
32
36.6
2.7
3.75
61
1,052
1,208
1,252
11/2'
1.682
2.080
3.04
61
2,664
3,045
3,172
40
42.7
3.1
4.52
61
1,208
1,381
1,439
2'
2.157
2.640
4.22
37
2,051
2,344
2,442
50
54.8
3.9
6.28
37
930
1,063
1,108
21/2'
2.635
3.530
5.89
30
2,224
2,542
2,648
65
66.9
5.3
8.77
30
1,009
1,153
1,201
3'
3.260
4.330
7.94
19
1,728
1,975
2,057
80
82.8
6.4
11.82
19
784
896
933
4-
4.260
5.610
11.78
19
2,238
2,558
2,665
90
108.2
8.3
17.53
19
1,015
1,160
1,209
51
5.295
7.77
17.33
10
1,632
1,865
1,943
125
134.5
11.56
25.80
10
740
646
881
6'
6.357
9.290
23.03
10
1,951
2,230
2,322
150
161.5
13.8
34.27
10
885
1,012
1,053
81
8.249
16.490
40.15
7
2,424
2,770
2,885
200
209.5
24.5
59.75
7
1,100
1,256
1,309
tqculftw Control Qv- allied
TUBE & CONDUIT
S5-3
Listed
Approved Listed
16100 S. Lathrop - Harvey, IL 60426
Customer Service:
11350 Norcom Rd. - Philadelphia, PA 19154
(800) 882-5543
2525 N. 27 th Ave. - Phoenix, AZ 85009
Fax 708-339-1806
S5-3
m
cew
'a 4
W
17;
x
'"No
Bull Moose Tube Company's "Eddy Pipe" brand sprinkler pipe is produced to meet sprinkler pipe standards &
applications. Here are just a few advantages of Eddy Pipe:
• All pipe products are UL Listed (for U.S. and Canada),
and have been Approved by Factory Mutual.
• Excellent Production & coating capabilities, tighter
tolerances, and our unique steel properties make
our pipe'excellent for roll grooving, welding,
threading, and plain end fittings.
• All products are dual certified to ASTM A-135 and
A-795.
• Available in specific cut to order lengths from
regular mill rollings.
• More popular sizes roll every two weeks.
• Floor stock available in various lengths.
• Available with coating or bare.
• Ultra Eddy, Eddy Flow, Eddylite, and Eddythread
40 offer cost savings along with superior
hydraulics without compromising service life.
Schedule 10 and Schedule 40: FM Approved and UL Listed sprinkler pipe
Eddy Flow: Cost effective replacement for Schedule 10
Eddylite: Lightwall threadable with standard outside diameter
Eddythread 40: Lightwall threadable Schedule 40 replacement with Corrosion Resistance Ratio of 1.0
Ultra Eddy: Lightwall roll groovable pipe
1819 Clarkson Road For additional information,
Chesterfield, MO 63017 contact your salesperson today at
JJI BULL. MOCM TLM.COPAPANY (800) 325-4467 (800) 325-4467 or (636) 537-2600 usMI
FAX: (636) 537-2645 in the USA, or from Canada
www.bullmoosetube.com call (800) 882-4666
AO�companY e-mail: info(a)bullmoosetube.corn <6>
APPFArAM
All infonnation contained herein is accurate as known at the firne of publication. Bull Moose Tube reserves the right to change product specifications without nofice and without incurring obligation.
3/03
'BMT - Eddy Pipe" Sizes Available
NPS (in)
1
1
11/4
1 11/2
2-
1 21/2
3
1 4
O.D. (in)
1.315
1.660
1.900
F
2.375�
2,875
3.500
1 A -500
Ultra Eddy
Wall (in)
0.065
0.065
0.065
0.065
L D. (in) 1.201 1.546 1.786 2.257
Empty Weight (lbs/ft) 0.868" 1.107 1.274 1.604
-Water-Filled Weight (lbs/ft) 1.359 1.920 2.360 3.338
C.R.R. 2.17 1.11 1.00
Eddy Flow
Wall (in)
0.083
0.095
0.095
0.083
0.090
0.101-.
L D. (in) 1.515 1.734 2.209 2.729 3.342
4.316
Empty Weight (lbs/ft) 1.399 1.833 2.315 2.475 3.281
4.750
Water -Filled Weight (lbs/ft) 2.180 2.856 3.976 5.010 7.082
11.090
C.R.R. 2.93 3.44 1 2.78- 1.09 1.00
1 1.00
Schedule 10
Wall (in)
0.109
0.109
00109
0.109
0.120
0.120
0.120
L D. (in) 1.097 1.442 1.682 2.157 2.635 3.260
4.260
Empty Weight (lbs/ft) 1.404 1.806 2.085 2T38 3.531 4.332
5.6-19
Water -Filled Weight
(lbs/ft)
1.814
2.514
3.048
4.221
5.894
7.949
11.795-
C.R.R. 15.27 9.91 7.76 6.27 4.92 3.54
2__5
Eddylite
Wall (in)
0.119
1 0.119
0.122
0.122
I.D. (in) 1.093 1.438 1.672 2.147
Empty Weight (lbs/ft) 1.520 1.958 2.317 2.936
Water -Filled Weight (lbs/ft) 1.927 2.662 3.268 4.505
R. R. 0.74 0.48 0.47 0.38
Eddythread
40
-C.
Wall (in)
0.126
0.131
0.136
0.141
I.D. (in) 1.090 1.425 1.655 2.124
Empty Weight (lbs/ft) 1.600 2.139 2.562 3.364
Water -Filled Weight (lbs/ft) 2.004 2.830 3.494 4.899
CAR. 1.00 1.00 1.00 1.00
Schedule 40
Wall (in)
0.133
0.140
0.145
0.154-
L D. (In) 1.049 1.380 1.610 2.067
Empty Weight (lbs/ft) 1.679 2.273 2.718 3.653
Water -Filled Weight (lbs/ft) 2.054 2.921 1 3.600 5.10
C.R.R. 1.00 1.00 1.00 1.00-1-
W%1J%- %1W11VV10JV91* LOWIC lb CIMU dVdJJcJL)Je
* All Weights are Nominal
NIA: Not Applicable
PIPE PREPARATION
For proper operation, all pipe surfaces should be cleaned prior to installation. In order to provide a leak -tight seat for the gasket, pipe surfaces should
be free from indentations and projections from the end of the pipe to the groove. All loose paint, scale, dirt, chips, grease, and rust must be removed
prior to installation. Failure to take these important steps may result in improper coupling assembly, causing leakage. Also, check the manufacturer's
linstructions for the specific fitting used.
The Superior Lightwall Threadable
Bull Moose Tube Eddylite is a lightwall threadable
pipe manufactured in NPS 1" through 2". Eddylite is a
truly unique product within the fire protection industry.
This product has been engineered to provide lower
cost fire protection systems without compromising
service life, adequate wall thickness, or standard
outside diameter.
Eddylite is manufactured to meet the requirements of
ASTM A135 and A795 specifications. This pipe
product has been fully approved by Factory Mutual,
and listed by Underwriters Laboratories (for U.S. and
Canada) for use in fire protection systems with a
working pressure of 300 psi or less.
Corrosion Resistance Ratio (CRR)
Nominal:
Standard,',
inside:-
U
tiea
''UL
CUIL�:�
Bundle
Pi 6 Size
P
O.D�_
Diameter
Unthreaded�
h
Unt t6aid6d_',
Si 'd
z
(i n).
(in)
1
1.315
1.093
0.74
13.20
0.72
91
1-1/4
1.660
1.438
0.48
8.48
0.60
61
1-1/2
1.900
1.672
0.47
7.36
0.60
61
2
2.375
2.147 1
0.38
5.96 1
0.50
37
Advantages of Bull Moose Tube Eddylite
Standard outside diameter, unlike some other lightwall threadable pipe products.
Lighter in weight than schedule 40.
Superior burst strength and corrosion resistance ratio compared to other lightwall threadable pipe products.
Exceptionally strong, meets or exceeds ASTM Al 35 minimum yield requirements.
Can be used with standard couplings, fittings, and valves.
Freight savings.
Lower sprinkler system costs without compromising service life.
Better hydraulics than schedule 40. 1
Wall thickness and weight close to schedule 30; compare to other lightwall threadable products with wall
thickness less than schedule 10!
1819 Clarkson Road For additional information,
C-1144 Chesterfield, MO 63017 contact your salesperson today at C @111s
EHA.L IVN308E TLIBE C:CNVIPANY (800) 325-4467 (800) 325-4467 or (636) 537-2600 USTED
FAX: (636) 537-2645 in the USA, or from Canada
www.builmoosetube.com call (800) 882-4666
A�companY e-mail: infoO)bullmoosetube.com <i�>
APPMVED
All information contained herein is accurate as known at the Ume of publication. Bull Moose Tube reserves the right to change product specifications without notice and without incurring obligation.
2/03
The Cost Effective Replacement for Schedule 10
Realizing the growing need of fire protection systems
in commercial and residential construction, Bull
Moose Tube has added Eddy Flow to its
comprehensive line of sprinkler pipe products.
Eddy Flow is a specially engineered replacement for
schedule 10, offering better flow characteristics while
providing design flexibility. This product is FM
approved, as well as UL listed (for U.S. and Canada)
for roll grooving and welding. Please check with
appropriate sources for up-to-date listings and
approval information.
As an added benefit, it is more economical to use than
schedule 10 due to reduced delivery costs and ease
of handling. Furthermore, Eddy Flow's larger ID
provides an opportunity for downsizing and further
cost savings.
COMPARISON
uorrosion Kesisrance Kario
BENEFITS
? Dual Certified to ASTM A 135 and A795.
? FM approved for roll grooving and welding for use In wet systems.
? UL listed (for U.S. and Canada) forJoining by welding or by listed rubber gasketed fittings for use in wet, dry,
preaction, and deluge type sprinkler systems.
? Lightweight - saves shipping costs, and offers easier handling.
? Can be used with roll grooved couplings or welded outlets for pressures up to 175 psi.
? Floor stock available in various lengths produced in Trenton (GA), Gerald (1140), and Masury (OH). Also can be
ordered in custom lengths.
? Can be supplied roll grooved, or plain end for use with Victaulie F178 Fittings.
? Can be used for wet and dry* systems.
* Eddy Flow can be hot dipped galvanized to meet Ws requirement for dry systems.
PIPE PREPARATION
For proper operation, all pipe surfaces should be cleaned prior to installation. In order to provide a leak -tight seat for the gasket, pipe surfaces should be
free from indentations and projections from the end of the pipe to the groove. All loose paint, scale, dirt, chips, grease, and rust must be removed prior
to installation. Failure to take these important steps may result in improper coupling assembly, causing leakage. Also, check the manufacturer's
instructions for the specific fitting used.
1819 Clarkson Road For additional information,
Chesterfield, MO 63017 contact your salesperson today at C @111101
Q�4 i A
13 BULL MOO= TLM CXXV5%WY (800) 325-4467 (800) 325-4467 or (636) 537-2600 Ulm i
FAX: (636) 537-2645 in the USA, or from Canada 1400�
www.bullmoosetube.com call (800) 882-4666 FM
Al=companY e-mail: infbAbullmoosetube.com 41::�M>
APPROV"
All infonnation contained herein is accurate as known at the time of publication. Bull Moose Tube reserves the right to change product specifications without notice and without incurring obligation.
Q/(),)
6
C.R.,
NPS",
0.1i.
Eddy�olow,
Sch'.1101
S6'h'., 46' 1:,
EddY, Fl ow
Sch edule,A0.
001)
0h)
0
n
P Y
04�
1-1/4
1.660
1.515
1.442
1.380
2.93
1.00
1-1/2
1.900
1.734
1.682
1.610
3.44
1.00
2
2.375
2.209
2.157
2.067
2.78
1.00
2-1/2
2.875
2.729
2.635
2.469
1.09
1.00
3
3.500
3.342
3.260
3.068
1.00
1.00
1 4 1
4.500 1
4.316
4.260
4.026
1.00
1.00
uorrosion Kesisrance Kario
BENEFITS
? Dual Certified to ASTM A 135 and A795.
? FM approved for roll grooving and welding for use In wet systems.
? UL listed (for U.S. and Canada) forJoining by welding or by listed rubber gasketed fittings for use in wet, dry,
preaction, and deluge type sprinkler systems.
? Lightweight - saves shipping costs, and offers easier handling.
? Can be used with roll grooved couplings or welded outlets for pressures up to 175 psi.
? Floor stock available in various lengths produced in Trenton (GA), Gerald (1140), and Masury (OH). Also can be
ordered in custom lengths.
? Can be supplied roll grooved, or plain end for use with Victaulie F178 Fittings.
? Can be used for wet and dry* systems.
* Eddy Flow can be hot dipped galvanized to meet Ws requirement for dry systems.
PIPE PREPARATION
For proper operation, all pipe surfaces should be cleaned prior to installation. In order to provide a leak -tight seat for the gasket, pipe surfaces should be
free from indentations and projections from the end of the pipe to the groove. All loose paint, scale, dirt, chips, grease, and rust must be removed prior
to installation. Failure to take these important steps may result in improper coupling assembly, causing leakage. Also, check the manufacturer's
instructions for the specific fitting used.
1819 Clarkson Road For additional information,
Chesterfield, MO 63017 contact your salesperson today at C @111101
Q�4 i A
13 BULL MOO= TLM CXXV5%WY (800) 325-4467 (800) 325-4467 or (636) 537-2600 Ulm i
FAX: (636) 537-2645 in the USA, or from Canada 1400�
www.bullmoosetube.com call (800) 882-4666 FM
Al=companY e-mail: infbAbullmoosetube.com 41::�M>
APPROV"
All infonnation contained herein is accurate as known at the time of publication. Bull Moose Tube reserves the right to change product specifications without notice and without incurring obligation.
Q/(),)
psi
. ME
in ®R
M
r%
%tu'')%liNG t5PA\ICH OUTLET FITTINGS. -
C(D
APPROVED USTED
MERIT MANUFACTURING CORPORATION
319 Circle of Progress, e Pottstown, Pennsylvania 19464-3811
Merit Weld-Miserrm Tee -Lets Welding Branch Outlet Fittings offer the user a high strength, low cost forged thread-
ed and grooved line of fittings specifically designed and manufactured to be installed on schedules 5 thru 10, propri-
etary thin wall flow pipe and standard wallpipe.
UrfW Des�nTM SedKess
Merit's Unified Design-rm Series carries all important design considerations into its entire line of welding branch outlet fittings.
Merit Weld -Miser Tee -Lets are designed and manufactured to reduce the amount of weld required to install the Tee -Lets
on thin wall or proprietary flow pipe. Typically only one weld -pass completes the installation. Merit Tee -Lets install with
less weld volume than any other brand of welding outlet fittings for fire sprinkler appli-
cations. To accomplish this:
- The contoured end of the fittings employs a reducd outside diameter.
Two major advantages are immediately apparent:
- The thinner wall on the contoured end permits welding temperatures to be
matched to the thickness of the branch line or main thereby insuring complete
penetration without cold welds, weld roll -off, burn -through or excessive distor-
tion.
0 On the smaller sizes a heavier section is maintained on the threaded end of the
77
L=_ fitting. This protects the threads from damage during shipping and handling
prior to installation as well as from weld distortion.
Each outlet size 1-1/2" and larger, whether male or female threaded, grooved or
beveled requires the same hole size in the header pipe. This simplifies the installa-
tion process.
Tee -Let welding outlet fittings are manufactured from highly weldable steel which conforms to the chemical and physical require-
ments of ASTM A-53, Grades A or B, Type E. Ease of installation is assured when automatic welding'equipment is used to install
Merit Tee -Lets.
Threads are cut in accordance with the requirements of ANSI 131.20.11, 300 lb. class, national standard for tapered pipe threads.
BS21:1985 BSPT threads are available.
• Tee -Let threaded and grooved welding outlet fittings are UIJULC Listed, and FM Approved for use in the fire sprinkler systems
installed in accordance with the requirements of NFPA Bulletin 13. They are rated for 300 PSI operation in fire sprinkler systems,
and higher pressures in other non-critical piping systems. Send for pressure ratings per ASME/ANSI B31.
• Tee -Lets are offered in a wide variety of header sizes. The consolidated header sizes shown in the following charts allow the fit-
tings to be installed on more than one header size, while permitting the first size listed to fit the header perfectly, while a small gap
I %.A I %_P�d I " ll�j I LJ %.J��I_y V V %ALAF-I V IL -)LA TM K.A.P-L&A-8
Branch Outlet Fittings shall be Merit Weld-MiserTm Tee -Leto, lightweight forged steel, employing low weld volume profile to provide for
full penetration welds with minimum burn -through and pipe distortion on schedules 5 thru 10, proprietary thin wall, and standard wall
pipe. Threads are to be ANSI 131.20.11, tapered 300 lb. class or BS21:1985, and the bore of the fittings calculated to improve flow.
Welding outlets to be UL Listed, FM Approved for use conforming to NFPA, Bulletin 13 and pressure rated for 300 PSI maximum. Tee-
Letse by Merit Manufacturing Corporation, Pottstown, Pennsylvania 19464 U.S.A.
How to order — Use either of the following methods for ordering Merito Weld-MiserTm Tee -Lets@.
Method No. 1 – Specify quantity
desired followed by the
part number shown in the
"dimensions" chart for the type
and size of outlet desired.
QUANTITY PART NUMBER
Method No. 2 –
Use the following system:
— --x
_--duanfity
Type Merit
Outlet Size
Header Size
Weight End Tee -Let
Always n "A"
Insert size
Sch. 10 A — Female Thread
a few more of chart
consolidation
Standard B — Male Thread
than actually
from
C — Cut Groove
required for
Column "B"
C/R — Roll Groove
the job.
of chart
Steel
Material
Twe A - Fffrde TITeads
- ------ f ----------- B
---------- -------
Dmm§ons & CorreTaxi-g Nr
i Yrr_-m onvvvm
rTM
'Aumber
Eh'
Norninallf"''Nornihal",�l.",
Size
C,�
Dametei,
tp-4,,
'!Z4
1002DO2
1/4 x
1-1/4-8
1.625
1.610
0875
QDBD
-
6x
6-20D
41.3
4Q9
('9
004
1005012
1/2 x
1-1/4 -1-1/2
1.063
Q700
0500
0.171
-
13 x
32-40
27JD
1T8
12.7
008
1-1/2-2
1JO63
Q700
Q500
0.171
1005015
-
40-50
27.0
17.8
127
006
2-2-1/2
1.063
0700
0500
0.171
1005C20
1115030
50-65
27.0
17.8
127
OC6
2-1/2-8
1JD63
Q70D
Q500
Q169
0875
Q477
-
65-200
27.0
17.8
127
006
1007012
314 x
1-1/4 -1-112
1.125
0292090
05M
0260
-
19 x
32-40
2136
409
12.7
0.12
1-1/2-2
1.125
09M
0_5CO
Q26D
1007015
OB57
-
50x
40-50
2a6
229
12.7
a38
2-2-1/2
1.125
090D
Q50D
_Q12
Q260
1OD702D
1120025
5D-66
2a6
2Z9
12.7
0.12
2-1/2-8
F
1.125
09M
06M
0256
1OD7025
112DO30
65�21M
2R6
22-9
123
0,12
101OD12
1 X
1-1/4 -1-1/2
1250
1.145
050D
0.331
1110012
25x
32-40
31.8
29.1
12.7
0.15
1010015
1.750
1-1/2-2
1250
1.145
05M
0-331
1110015
40-50
31.8
29.1
12.7
0.15
2-2-1/2
1250
1.145
Q50D
0-32D
101002D
111002D
50-65
31.8
29.1
12.7
0.15
2-11'2 - 3
1250
1.145
05M
OL314
1010025
G743
1110025
65 - 80
31.8
29.1
12.7
0.14
3-4
1250
1.145
Q500
0-909
1010030
1250
1110030
65x
80-100
31.8
29.1
12.7
0.14
5-8
1250
1.145
0_9CO
0291
1010050
'I'll
125 - 2M
31.8
29.1 ,
12.7
0.13
1012012
1- 1/4 x
1-1/4 -1-112
1.375
1.490
0500
Q432
1112012
32x
32-40
34.9
37.8
12.7
.019
1-1/2-2
1.375
1.490
Q500
G421
1012015
1112015
40-50
34.9
37.8
12.7
.019
2-2-1/2
1.375
IIA90
Q500
Q421
10120M
1.150
1112020
50-66
349
37B
12.7
.019
2-1/2-3
1.375
1.490
05M
0,411
1012025
1.150
1112025
65-8D
34-9
378 ,
12.7 ,
.019
1012030
3 x
3-4
1.375
1A90
05CO
0
1112030
8Dx
80-100
6a5
37.8
12.7
.018
5-8
_34.9
1.375
1A90
Q500
G389
1012050
1112050
125-200
34D
37.8
12.7
.018
i Yrr_-m onvvvm
Z
1 MM 13
OEM
MR
Note: Tee -lets are manufactured to fit size -on -size, that is the contoured shape on a given Tee -Let is made to fit perfectly on the first listed header size. If installed on the sec-
ond header size marked on the fitting, a slight gap of approximately 1/32" will appear along the longitudinal centerline of the header. For example, a 11" x 2 - 2-1/2' Tee -Let, is
a 1" outlet fitting manufactured to fit perfectly on the 2" header size listed, while leaving a 1/32" gap along the longitudinal centerline of the 2-1/2' size. If a perfect fit is required
for a 2-1/2' header pipe, then a V x 2-1/2 - 3' Tee -let would be ordered. Size consolidations are employed to reduce inventory and provide for greater flexibility.
4 rrm,
Wi,
Size
',�'Lengtlh
Dametei,
tp-4,,
'!Z4
101-la5
1- 112 x
1-112
1.625
1.610
0875
0.4-n
'I'll -5015
40x
41.3
4Q9
('9
D22
2
1625
1.610
Q975
CL477
1015020
1115020
5)
41.3
4Q9
222
D22
2-1/2
1525
1.610
OH75
Q477
1015025
1115025
Eb
41.3
222
022
3-4
IZ25
1.610
OB75
OL477
101503D
1115030
80-100
41.3
409
222
.022
1015040
4
1.625
1.610
0875
Q477
1115D40
1CO
41.3
409
222
022
5-8
1B25
1.610
OB75
Q477
1015050
1115050
125 - 200
413
409
22-2
M
102am
2x
2
1.750
2067
Q875
OB57
112CO20
50x
9D
445
525
2??
a38
2-1112
1.750
2.067
Q875
1C=
1120025
ffi
445
_5Z5
222
038
3
1.750
2067
0875
n
1020030
112DO30
8D
44.5 1
52-5
222 1
0.39
102aM
4
1.750
2.067
(1875
0"
112CO40
1CO
44.5
525
222 1
0-36
5
1.750
2.067
OH75
Q743
102aw
1120050
125
445
525
222
0-34
6
1.750
2067
Q875
0743
1020060
112CO60
150
445
525
222
0,34
1C2DD8D
8
1.750
2.067
0875
G743
112COBD
2ED
445
525
222
0,34
1
24-1/12- x
2-1/2
2215
2
2469
1.125
1250
1125025
65x
EB
54.0
627
2a6
055
3
2215
2469
1.125
1200
1025(M
1125030
EID
540
627
2a6__
Q55
4
15
2469
1.125
1.150
1025D40
1125040
10D
54JD
627
2a6
Q52
1025050
5
2-215
2-469
1.125
1125050
125
540
627
2116
G52
1025060
6
2215
2469
1.125
1.150
1125060
153
54D
627
2a6
052
1025080
8
2215
2469
1.125
1.150
11250BO
21)
54.0
627
2116
G52
1C25030
3 x
3
3668
iaii-
aloD
8Dx
M
6a5
77,9
38.1
1.41
4
2500
3068
1500
3.100
1025D40
100
635
77.9
3al
1.41
1C25D50
5
25M
3068
1 _rM
aloo
125
6a5 1
77.9
3al 1
1.412
6
2-500
3068
1-9m
�1100
102506D
150
635
77.9
381
1.412
1C25CW
8
2500
3068
1 _1M
3.100
M
635
77.9
381
1.41
104OD40
4 x
4
3000
4,026
2000
5000
-
4 x
ICD
762
1023
508
227
5
300D
4JO26
2000
50M
1040050
-
125
M2
102-3
5C18
227
104006D
6
300D
4JO26
2000
50M
15D
762
1023
508
227
8
3000
4jC26
2000
50M
104009D
- 1
1
231)
762
1023 1
50B 1
227
Z
1 MM 13
OEM
MR
Note: Tee -lets are manufactured to fit size -on -size, that is the contoured shape on a given Tee -Let is made to fit perfectly on the first listed header size. If installed on the sec-
ond header size marked on the fitting, a slight gap of approximately 1/32" will appear along the longitudinal centerline of the header. For example, a 11" x 2 - 2-1/2' Tee -Let, is
a 1" outlet fitting manufactured to fit perfectly on the 2" header size listed, while leaving a 1/32" gap along the longitudinal centerline of the 2-1/2' size. If a perfect fit is required
for a 2-1/2' header pipe, then a V x 2-1/2 - 3' Tee -let would be ordered. Size consolidations are employed to reduce inventory and provide for greater flexibility.
Cut Groove. Std. Wt. Male Thread Std. Wt.
Roll Groove Sch. 10
mala
Ncrnriai
DkTemiom &
Ttireai
Std
�Gro6W�
scj�id�
wk
Ffiaidir�
e
siz �,�
Lbnp
stid C
D�Wnetqr
P�
I
I Si�E
Std,Wt
EacW,,,
Z 4
Ccrreqmrxkig
p�rt rqLjrj)eM smog@
1310012
2OW2
22IM2
1x
25x
1-1/4-1-1/2
32-40
3
8D
1.049
2ra6
1.315
334
Q133
34
1.500
3)
1310015
121OCK)
2DW5
201M
2ZM5
2ZK)C2D
1-1/2-2
40-50
3
8D
1.049
2&6
1,315
334
Q133
a4
1.500
a)
Pilepizr,
6ome,
�6"
Nonr"I,
A&
1rmkJ6,D4reW'
:)Lit"
2-2-1/2
3
1.049
1.315
Q133
1.500
50-65
8D
266
33.4
3.4
F'
131OC25
2DUM
2ZKM
2-1/2-4
3
1.049
1.315
Q133
1.500
1329M
2-1/2x
2-1/2
3
Z469
2635
2H75
0203
0120
1.500
65-100
OD
2Cx6
334
3.4
3)
21
65x
ffi
EID
627
67.0
762
50
3D
3D
5-8
3
1.049
1.315
G133
1.500
3
3
2469
2635
2H75
Q203
G120
1.500
1310050
MM
22�
1325030
2225M
125-200
W
266
334
34
1325035
2125030
aMEW
8D
8D
6Z7
67JD
762
50
3.0
a)
1312012
2012D12
2212D12
1-1/4 x
1-1/4
3
1.368
1.660
Q140
1.500
4
3
2469
Z635
2875
=
Q120
1.500
32x
32
EID
34.7
422
3.6
3D
21250C
10D
8D
62767.0
762
5.0
30
a)
1-1/2
3
1-%B
1.660
C1140
1.500
5
3
2469
2635
2B75
Q203
G120
1.500
1131121315
2012015
2212015
132EO50
40
EID
34.7
422
3,6
a)
2125050
1z)
8D
627
67.0
762
5.0
3D
1)
2-2-1/2
3
1.368
1.660
Q140
1.500
6
3
Z469
2635
2B75
02M
Q120
1.500
121202D
2D12COO
2212MD
1
-
. 8D
34.7
422
36
3D
2125060
175
8)
627
67D
76.2
5.0
3.0
3)
3-4
3
1.368
1.660
C1140
1-9W
8
3
2469
263
2875
0
C1120
1.500
1312025
MUM
2212M5
132508D
80-100
8D
34.7
422
36
3D
21250EK)
23D
R)
62.7
67D
762
5.0
3,0
3D
1312050
2DI2060
2212060
5-8
3
1368
1.660
G140
1.500
133CC25
2CBDC25
3x
3
3
3068
3260
3-15W
0216
CX120
1-5W
1
1
125-200
8D
34.7
422
3.6
3D
133003D
2M=
2230030
9DX
8D
8D
7aO
830
880
5.0
3.0
3D
131W5
2015015
2215015
1-1/2 x
1-1/2
3
1.610
1.900
a145
1.500
3-11J2
3
305B
3260
3500
0216
Q120
1-9W
40x
4)
8)
409
4a3
3.7
T
E5
8)
78.0
830
8aO
5.0
30
3D
2
3
1.610
19DO
Q145
1.500
4
3
3068
13260
3-9W
OL2161
Q120
1.500
121502D
2DI502D
W
133CO35
9D
EID
40.9
4a3
3.7
3)
1CO
ED
780
8W
ffio
5.0
3.0
3)
2-1/2
3
1.610
1.900
OL145
1-500
5
3
3068
3260
3 -IM
0216
0.120
1.500
1315025
2D15025
M5C25
1330050
ffi
8D
4CX9
4a3
3,7
3)
125
ED
7aO
830 1
880
5.0
3.0
3)
3-4
3
1.610
1.900
C1145
1.500
6
3
30611
32601
35M
0216
Q120
1.500
1315030
2DI503D
221 -KIM
133COBD
2030015D
2230051)
80 - 10D
8D
409 .
4a3
3.7
3)
150
8)
7aO
830
880
5.0
3jO
3D
5-8
3
1.610
11-900
G145
1.500
8
3
3068
3260
3-900
0.216
0.120
1.500
131505D
20150EO
Z15WO
1330081)
211M
2230DBD
125 - 20D
8D
4Q9
4a3
3.7
-T)
I
I
2M
8)
78.0
83JO
8aO
50
3D
3D
1
-
2 x
2
3
2057
2375
Q 54
1.5oo
1340040
2DCM
22400C
4x
4
4
4026
4260
4-5,CO
0237
Q120
1.500
5OX
5D
8D
5Z5
60,3
39
3)
100x
1CO
1CO
1020
108.0
114.0,
60
3.0
3)
2-1/2
3
2067
Z375
C11 54
1.5oo
5
4
4JO26
4260
4 -IM
0237
Q120
1.500
1
-
1340360
2OXM
22400M
ffi
m
525
603
39
3D
125
100
102.0
10RO
114.0
60
30
3)
3
3
2.067
2375
ais4
1.5oo
6
4
4JO26
4260
45M
0237
G120
1 "
132=
-
134CO90
MIM
224006D
ED
9L) 1
525
603
39
150
1CO
102.0
101RO
114.0
6.0
ao
3:)
4
3
2.o67
z375
Q154
1.5oo
HD
8
4
4XIS
4260
45M
0237
Q120
1.50
1320035
21311M
-
1340091)
MCM
22401EO
1CO
8D
525
603
39
.
21D
1CO
1020
1080
114.0
6.0 ,
30
3D
1
-
5
3
2JO67
Z375
0.154
1.500
-
228M
6x
6
4
6D65
6-357
6625
0
Q134
1-500
125
ED
52.5.
6a3
39
3)
15OX
150
100
15SO
161.5
16a3
7.1
3.0
3D
6
3
2.067
2375
Q154
1-5W
8
4
6065
6.357
6625
Q290
Q134
1.50
1
2MM)
-
-
226=
m 1
525 ,
603
3.9 ,
33
M
ICO
15SO
161.5
16R3
7.1
30
3D
8
�5
3 1
20671
Z375 I
Q154 1
1.500
-
8 x
8
4
7.981
EL329
a625
Q322
G1481
1.50
132aM
2C121=1
-
1
1
M)
a)
525
60-3
39
3D
200x
aD I
1CD
20aO
212.0 1
213.0
8.0
30 �
3D
DISTRIBUTED BY MADE IN U.S.A.
BJUF-A
MERIT MAN FACTURING
C ORP 0 R AT 10"' N
319 Circle of Progress
Poffstown, Pennsylvania 19464-3811
(610) 327-4000 * Fax (610) 970-9282
Fax Toll Free 800-543-7013
www.meritmfg.com
01999 by Merit Manufacturing Corporation CGI/899
Grooved Fiffings Ad�
INITZLENHI-Al - - - - - - - - - -
Figures 501 9 5109 and 519
Patent Pending CENTRAL
Tyco Fire Products -- www.tyco-grooved.com
451 North Cannon Avenue, Lansdale, Pennsylvania 19446 -- USA
Customer Service/Sales: Tel: (215) 362-0700 / Fax: (215) 362-5385 Grooved Piping Products
Technical Services: Tel: (800) 381-9312 / Fax: (800) 791-5500
4
Grooved fittings provide an economical and
efficient method of changing direction,
adding an outlet, reducing, or capping
grooved piping systems. Figure 500 fittings
are available in durable ductile iron.
TUR: "I
:A,
Figure: 501, 510, 519
Sizes: 11/4" - 8"
Maximum Working Pressure:
300 psi; See specific data sheet for rating
of coupling being used.
Approvals: UL, FM, and ULC
Note: See Fire Protection Submittal Sheet
for exact Listing/Approval information.
Manufacture Source: Domestic
Material: Ductile iron, conforming to
ASTM A-536 Grade 65-45-12
Protective Coatings:
• Non -lead orange paint
• Fire Brigade red (optional) non -lead
• Hot dipped galvanized conforming to
ASTM A-1 53
urdering
Procedure
Ordering Information: When placing an
order, indicate the full product name. Please
specify the quantity, figure number and size.
Availability and Service: Grooved Piping
Products, valves, accessories and other
products are available throughout the U.S.,
Canada, and internationally, through a
network of distribution centers. You may
write directly or call 215-362-0700 for the
distributor nearest you.
Care and
O%n
Maintenance
The owner is responsible for the
inspection, testing, and maintenance of
their fire protection system and devices
in accordance with the applicable
standards of the National Fire
Protection Association (e.g., NFPA 25),
in addition to the standards of any
authority having jurisdiction. The
installing contractor or product
manufacturer should be contacted
relative to any questions. Any
impairment must be immediately
corrected.
It is recommended that automatic
sprinkler systems be inspected, tested,
and maintained by a qualified
Inspection Service.
Products manufactured by Tyco Fire
Products are warranted solely to the
original Buyer for ten (10) years against
defects in material and workmanship
when paid for and properly installed
and maintained under normal use and
service. This warranty will expire ten
(10) years from date of shipment by
Tyco Fire Products. No warranty is
given for products or components
manufactured by companies not
affiliated by ownership with Tyco Fire
Products or for products and
components which have been subject
to misuse, improper installation,
corrosion, or which have not been
installed, maintained, modified or
repaired in accordance with applicable
Standards of the National Fire '
Protection Association (NFPA), and/or
the standards of any other Authorities
Having Jurisdiction. Materials found by
Tyco Fire Products to be defective
shall be either repaired or replaced, at
Tyco Fire Products' sole option. Tyco
Fire Products neither assumes, nor
authorizes any person to assume for it,
any other obligation in connection with
the sale of products or parts of
products. Tyco Fire Products shall not
be responsible for sprinkler system
design errors or inaccurate or
incomplete information supplied by
Buyer or Buyer's representatives.
IN NO EVENT SHALL TYCO FIRE
PRODUCTS BE LIABLE, IN
CONTRACT, TORT, STRICT
LIABILITY OR UNDER ANY OTHER
LEGAL THEORY, FOR INCIDENTAL,
INDIRECT, SPECIAL OR
CONSEQUENTIAL DAMAGES,
INCLUDING BUT NOT LIMITED TO
LABOR CHARGES, REGARDLESS
OF WHETHER TYCO FIRE
PRODUCTS WAS INFORMED ABOUT
THE POSSIBILITY OF SUCH
DAMAGES, AND IN NO EVENT
SHALL TYCO FIRE PRODUCTS'
LIABILITY EXCEED AN AMOUNT
EQUAL TO THE SALES PRICE.
THE FOREGOING WARRANTY IS
MADE IN LIEU OFANYAND ALL
OTHER WARRANTIES EKPRESS
IMPLIED. INCLUDING WARRAN71ES
MERCHANTABILITYAND FITNESS
FOR A PARTICULAR PURPOSE.
No. 18-1.1
c I
Figure 501
C to E
C to E
I
!- C to E
Figure 510
Figure 519
E
General Notes: It is the Designer's responsibility to select products suitable for the intended service and to ensure that pressure ratings and
performance data is not exceeded. Always read and understand the installation instructions (IH -1000). Never remove any piping
component nor correct or modify any piping deficiencies without first depressurizing and draining the system. Material and gasket
selection should be verified to be compatible for the specific application.
twalFlow Control Tyco, Fire
/Products
Certii ie ornpany
Printed in U.S.A. 4-01
Figure 501
Figure 510
Figure 519
450 Elbow
900 Elbow
Tee
Nominal
G to E
Appx. Wt.
C to E
Appx. Wt.
G to E
Appx. Wt.
Size
Inches
Lbs.
Inches
Lbs.
Inches
Lbs.
Inches
MM
Kg.
MM
Kg.
MM
Kg.
1.75
0.8
2.75
1.0
2.75
1.4
1 V4
44.5
0.4
69.9
0.5
69.9
0.6
1 V2
1.75
1.0
2.75
1.4
2.75
1.8
44.5
0.5
69.9
0.6
69.9
0.8
2.00
1.3
3.25
1.8
3.25
2.6
2
50.8
0.6
82.6
0.8
82.6
1.2
2.25
1.9
3.75
2.7
3.75
3.9
21/2
57.2
0.9
95.3
1.2
95.3
1.8
2.50
2.6
4.25
3.7
4.25
5.4
3
63.5
1.2
108.0
1.7
108.0
2.4
3.00
5.0
5.00
7.0
5.00
10.1
4
76.2
2.3
127.0
3.2
127.0
4.6
3.50
8.6
6.50
13.4
6.5
18.8
6
88.9
3.9
165.1
6.1
165.1
8.5
4.25
17.2
7.75
26.3
7.75
36.3
8
108.0
7.8
196.9
11.9
196.9
16.5
E
General Notes: It is the Designer's responsibility to select products suitable for the intended service and to ensure that pressure ratings and
performance data is not exceeded. Always read and understand the installation instructions (IH -1000). Never remove any piping
component nor correct or modify any piping deficiencies without first depressurizing and draining the system. Material and gasket
selection should be verified to be compatible for the specific application.
twalFlow Control Tyco, Fire
/Products
Certii ie ornpany
Printed in U.S.A. 4-01
41
JXOTA
Tyco Fire Products -- www.tyco-grooved.com EE I V 0 1 0 " ONE A L.
451 North Cannon Avenue, Lansdale, Pennsylvania 19446 --- USA -110235amm-
Customer Service/Sales: Tel: (215) 362-0700 / Fax: (215) 362-5385
Technical Services: Tel: (800) 381-9312 / Fax: (800) 791-5500 Grooved Piping Products
General
Description
U. L U
F M
See Fire Protection Submittal Sheet
for pressure rating and Listing and
Approval information
The ADA CAP" is a patented grooved
end cap with an elbow formed into it.
It is typically used for installing the last
sprinkler head on branch line piping.
It is available with 1/2", 1/4", or 1" N.P.T.
outlet sizes.
Technical
Data
Sizes: 11/2", 2", and 21/2"
Maximum Working Pressure:
300 psi (2068 kPa)
Approvals:
UL, FM, and ULC
See Fire Protection Submittal
Sheet for exact Listing
Approval information.
Manufacturing Source: Domestic
Housing:
Ductile iron conforming to
ASTM A-536, Grade 65-45-12
Thread: N.P.T.
Protective Coatings:
• Clear rust inhibitive coating
• Optional Zinc electroplated
conforming to ASTM B-633
urdering
Information
Ordering Information: When
placing an order, indicate the full
product name. Please specify the
quantity, product name, and size.
Availability and Service: Grooved
Piping Products, valves, accessories
and other products are available
throughout the U.S., Canada, and
internationally, through a network of
distribution centers. You may write
directly, or call 215-362-0700 for the
distributor nearest you.
Care and
#%n
maiintullance
The owner is responsible for the
inspection, testing, and maintenance of
their fire protection system and devices
in accordance with the applicable
standards of the National Fire
Protection Association (e.g., NFPA 25),
in addition to the standards of any
authority having jurisdiction. The
installing contractor or product
manufacturer should be contacted
relative to any questions' Any
impairment must be immediately
corrected.
It is recommended that automatic
sprinkler systems be inspected, tested,
and maintained by a qualified
Inspection Service.
L i Ir"ON ite d
W-.lrrap%ty
a
roducts manufactured by Tyco Fire
Products are warranted solely to the
original Buyer for ten (10) years against
defects in material and workmanship
when paid for and properly installed
and maintained under normal use and
service. This warranty will expire ten
(10) years from date of shipment by
Tyco Fire Products. No warranty is
given for products or components
manufactured by companies not
affiliated by ownership with Tyco Fire
Products or for products and
components which have been subject
to misuse, improper installation,
corrosion, or which have not been
installed, maintained, modified or
repaired in accordance with applicable
Standards of the National Fire
Protection Association (NFPA), and/or
the standards of any other Authorities
Having Jurisdiction. Materials found by
Tyco Fire Products to be defective shall
be either repaired or replaced, at Tyco
Fire Products'sole option. Tyco Fire
Products neither assumes, nor
authorizes any person to assume for it,
any other obligation in connection with
the sale of products or parts of
products. Tyco Fire Products shall not
be responsible for sprinkler system
design errors or inaccurate or
incomplete information supplied by
Buyer or Buyer's representatives.
IN NO EVENT SHALL TYCO FIRE
PRODUCTS BE LIABLE, IN
CONTRACT, TORT, STRICT
LIABILITY OR UNDER ANY OTHER
LEGAL THEORY, FOR INCIDENTAL,
INDIRECT, SPECIAL OR
CONSEQUENTIAL DAMAGES,
INCLUDING BUT NOT LIMITED TO
LABOR CHARGES, REGARDLESS OF
WHETHER TYCO FIRE PRODUCTS
WAS INFORMED ABOUT THE
POSSIBILITY OF SUCH DAMAGES,
AND IN NO EVENT SHALL TYCO
FIRE PRODUCTS' LIABILITY EXCEED
AN AMOUNT EQUAL TO THE SALES
PRICE.
THE FOREGOING WARRANTY IS MADE
IN LIEU OFANYAND ALL OTHER
WARRANTIES EXPRESS OR IMPLIED,
INCLUDING WARRANTIES
MERCHANTABILITYAND FITNESS
FOR A PARTICULAR PURPOSE.
No. 21-2.1
A
I
AMA CAP"
Pipe
Dimensions
Net
O.D.
Takeout
Center to n
t.
A
B
C
D
Outlet
Size
NPT*
Inches
Inches
Inches
Inches
Lbs..
Kg.
MM
MM
MM
MM
1.25
1.75
1.89
0.77
'/2
31.8
44.5
48.0
1.25
1.75
1.89
-0.3
0.77
1.900
1 V2"
Y4
48.3
31.8
44.5
48.0
0.3
1.37
2.00
2.02
0.88
34.8
50.8
51.3
0.4
1.25
1.75
1.89
0.92
31.8
44.5
48.0
0.4
2.375
1.25
1.75
1.89
0.92
2"
3/4
60.3
31.8
44.5
48.0
0.4
1.37
2.00
2.02
1.06
34.8
50.8
51.3
0.5
1.47
1.97
1.89
1.28
1/2
37.3
50.0
48.0
0.6
1.47
1.97
1.89
1.28
2.875
21/2"
Y4
73.0
37.3
50.0
48.0
0.6
1.37
2.00
2.02
1.50
1
34.8 1
50.8 ,
51.3
0.7
* BSP threaded outlets are available upon request.
General Notes: It is the Designer's responsibility to select products suitable for the intended service and to ensure that pressure ratings
and performance data is not exceeded. Always read and understand the installation instructions (11-1-1000). Never remove any piping
component nor correct or modify any piping deficiencies without first depressurizing and draining the system. Material and gasket
selection should be verified to be compatible for the specific application.
tqC01Flow Control Tyco Fire Printed in U.S.A. 4-01
lProducts
oauc
emrJartm
Fmlexible
0�1
7_IkL�edudnmv Coupfin
V 9
Manufactured by: Central Grooved Piping Products.
a Subsidiary of Central Sprinkler Company
451 North Cannon Avenue, Lansdale, Pennsylvania 19446
Phone (215) 362-0700 Fax (215) 362-5385
Product 1
7Cm -J;�wft"rlau
The Figure 716 Reducing Coupling
allows a direct transition between two
different pipe sizes, and replaces two
couplings and a reducing fitting.
Figure: 716
Sizes: 2 x 11/2" — 8 x 6"
Approvals:
UL, FM, and ULC
(See Fire Protection Submittal
Sheet for exact Listing/
Approval information.)
Manufacture Source:
Domestic
Housing:
Ductile iron conforming to
ASTM A-536, Grade 65-45-12
Protective Coatings:
Ll Non -lead orange paint
Ll Hot dipped galvanized conforming
to ASTM A-153
Bolts/Nuts: Track Head Bolts -
conforming to ASTM A-183, Zinc
Plated, (Minimum Tensile = 110,000 psi)
Gaskets: (specify when ordering)
Q Grade A EPDMA violet color code
ambient to +1 50OF (+660C) for fire
protection systems. Not recommended
for hot water systems.
Q Grade E EPDM green color code
-30OF (-340C) to +230OF (+I 100C)
LJGrade T Nitrile, orange color code
-20*F (-29*C) to +1 80*F (+820C)
(See Gasket Recommendation Sheet
for aid in selecting the proper gasket)
1.Check Gasket color code to ensure
that the gasket is suitable for
intended application.
2.An optional Type 304 stainless
steel metal insert is available. Pipe
telescoping can be a concern when
installed in the vertical position. If
you are using a metal insert, place
the insert inside the gasket,
aligning the insert slots with the ribs
on the gasket.
3. Cover outer surface of the gasket
with a thin layer of petroleum -free
silicon lubricant or equivalent.
Please refer to "Gasket
Recommen,dations" sheet for
additional information.
Note: Reducing couplings are
not recommended for
freezer applications.
4. Install the gasket by placing the
gasket over the pipe and ensure that
the gasket lip does not overhang the
pipe end. Bring both pipe ends
together, ensure proper alignment
and slide the gasket into position,
properly centering it between the
grooved portions of each pipe.
5. Place the coupling housings over
the gasket so that the housing keys
fully engage into grooves. Insert the
bolts into the couplings and
assemble onto the bolts.
6.Tighten nuts uniformly until properly
torqued to bring housings in contact.
at the bolt pads (see chart).
Caution — uneven tightening can
cause gasket pinching.
Note: Never remove any piping
component without verifying
that the system is
depressurized and drained.
Ordering Information: When placing
an order, indicate the full product
name. Please specify the quantity,
figure number, type of gasket, EPDM
"A", "E" or Nitrile "T", and size.
Availability and Service: Central
Grooved Piping Products, valves,
accessories and other products are
available throughout the U.S.,
Canada, and internationally, through
a network of Central distribution
centers. You may write directly to
Central or call 215-362-0700 for the
distributor nearest you.
Warranty: Central will repair and/or
replace any products found to be
defective in material or
workmanship within a period of one
year from the date of shipment.
Please refer to the current price list
for further details of the warranty.
Central No. 18-3.0
Central Grooved No. 1.4.0
Figure 716 - Reducing Coupling
� r"1-11
F711!
Pipe
Max. *
End Gap
Max. t
Pressure
Dimensions
Deflection
Bolt
Size
Bolt
Torque
Net
Wt.
0. D.
A
B
C
0
Inches/
Size
Inches
I nches
psi
Inches
Inches
Inches
Per
Foot
Dia. X Lg.
ILA
Lbs.
MM
MM
KPa
MM
MM
MM
Coupling
MM/M
Nm
1
Kg.
2" x 11/2--
2.375 x 1.900
0.13
500
3.50
5.06
1.88
V - 53'
0.39
3 /8" x 21/4"
30
2.0
60.3 x 48.8
3.3
3447
88.90
1128.50
47.80
32.9
41
ag
21/2" x 2"
2.875 x 2.375
0.13
500
4.00
1 5.50
1.88
10 - 33'
0 ' 32
3/8-- x 2 1 /4"
30
2.5
73. 0 x 60.3
3.3
3447
101.60
139.70
47.80
270
41
1.1
3" x 2"
3.500 x 2.375
0.13
500
4.69
6.50
1.88
10 - 17'
0.27
1/2" x 3"
50
4.5
88.9 x 60.3
3.3
3447
119.10
165.10
47.80
22.4
68
2
3" x 21/2"
3.500 x 2.875
0.13
500
4.69
6.50
1.88
10 - 17'
0.27
1 /2" x 3"
50
4.6
88.9 x 73. 0
3.3
3447
.119.10
165.10
47.80
22.4
68
2.1
4" x 211
4 - 500 x 2.375
0.19
500
6.00
8.13
2.00
20 - 38'
0.55
5/8t, x 31/4"
90
6.0
114.3 x 60.3
4.8
3447
152.40
206.50
50.80
45.9
122
2.6
4" x 2'/2"
4 - 500 x 2.875
0.19
500
6.00
8.13
2.00
20 - 38'
0.55
5 /8" x 31/4"
90
6.1
114.3 x 73. 0
4.8
3447
152.40.206.50
50.80
45.9
122
2.8
4" x 3"
4.500 x 3.500
0.19
500
6.00
8.13
2.00
20 - 38'
0.55
5/811 x 31/4"
90
6.2
114.3 x 88.9
4.8
3447
152.40
206.50
50.80
45.9
122
2.8
5" X, 4"
5 - 563 x 4.500
0.25
500
7.13
9.56
2.06
20 - 5'
0.44
3 /4.' x 4 3 /4"
150
10.1
141.3 x-1 14.3
6.4
3447
181.10
242.80
52.30
36.4
203
4.6
6" x 4"
6 * 625 x 4.500
0.25
400
8.38
10.88
2.06
10 - 44'
0.36
3 /4'1 x 4 3 /4"
150
11.6
168.3 x 114.3
6.4
2758
212.80
276.35
52.30
30.2
203
5.3
6" x 5"
6.625 x 5.563
0.25
400
8.38
10.88
2.06
10 - 44'
0.36
3 /4" x 4 3 /419
150
11.7
168.3 x 141.3
6.4
2758
21280
276.35
52.30
30.2
1
203 1
5.3
8" x 6"
8 ' 625 x 6.625
0.25
400
10.69
13.75
2.25
1' - 15'
0.26
7 /8" x 4 3 /4"
2o6T
21.6
219. 1 x 168.3
6.4
2758
271.50
349.30
5710
21.8 ,
271 1
9.8 j
* Maximum available gap between pipe ends. Minimum gap = 0.06" (with metal insert).
t Maximum pressure and end load are total from all loads based on standard weight steel pipe. Pressure ratings and end loads may
differ on other pipe materials and/or wall thickness. Contact Central for details. See Fire Protection Equipment Submittal Sheet for Listing
and Approval pressure ratings.
@1998 Central Grooved Piping Products
Printed in U.S.A.
111" 1 f, &T, kET 111
6
716.09.98
zk
Vne-
Manufactured by: Central Grooved Piping Products
a Subsidiary of Central Sprinkler Company
451 North Cannon Avenue, Lansdale, Pennsylvania 19446
Phone 2151362-0700 Fax �215� 362-5385
?),roduct
7
The Figure 772 Rigid Coupling
provides a rigid joint by firmly
gripping along the circumference of
the pipe grooves. Rigid Couplings
are preferred for dry pipe and
freezer applications. Central rigid
couplings are a proven dependable
method of joining pipe and are an
economical alternative to welding,
threading or using flanges, and can
be used on a variety of pipe material
and wall thicknesses. The Figure
772 Coupling is UL Listed for
grounding and bonding, and is
suitable for bonding systems with a
maximum service entrance capacity
of 200 amps.
T -nicml
ed]
W%
MUM
Figure: 772
Sizes: V/4" - 12"
Approvals:
UL, FM, and ULC
(See Fire Protection Submittal
Sheet for exact Listing/
Approval information.)
Manufacturing Source:
Domestic
Housing:
Ductile iron conforming to ASTIM
A-536, Grade 65-45-12
Protective Coatings:
D Non -lead orange paint
El Hot dipped galvanized conforming
to ASTM A-153
Bolt/Nuts: Track Head Bolts -
conforming to ASTM A-183,
Zinc Plated, (Minimum Tensile
110, 000 psi)
Gasket: (specify when ordering)
Ll Grade A EPDMIA violet color code
ambient to +1 50*F (+660C) for fire
protection systems. Not recommended
for hot water systems.
Q Grade E EPDM green color code
-30OF (-340C) to +230OF (+1 100C)
QGrade T Nitrile, orange color code
-20oF (-290C) to +1 80OF (+820C)
LITri-seal (Grade E EPDM), green
color code, for use in dry pipe or
freezer systems.
(See Gasket Recommendation Sheet
for aid in selecting the proper gasket)
2
Installation
a"
1 Check gasket color code to ensure
that the gasket is suitable for
intended application.
2. Cover edges and outer surface of
the gasket with a thin layer of
petroleum -free silicon lubricant or
equivalent. Silicon gasket lubricant
and tri -seal freezer gaskets are
recommended for freezer
applications. Please refer to
"Gasket Recommendations" sheet
for additional information.
3. Install the gasket by placing the
gasket over the pipe and ensure that
the gasket lip does not overhang the
pipe end. Bring both pipe ends
together, ensure proper alignment
and slide the gasket into position,
properly centering it between the
grooved portions of each pipe.
4. The Figure 772 Coupling has a
tongue and recess arrangement.
Place the coupling housings over
the gasket so that the housing keys
fully engage into grooves making
sure that the tongue is mated to the
recess. Insert the bolts into the
coupling and assemble the nuts
onto the bolts.
Note: Selected sizes of the Figure 772
Coupling incorporate a "Universal
Tongue and Recess" feature which
will be incorporated on additional
sizes in the future. These coupling
housings have identical tongue/
recess pairs at each end, which
allow an engagement fit no matter
which end of the housing is brought
together. For additional information,
please contact Central.
5. Tighten nuts uniformly until proper
torque is obtained (see chart),
keeping the gaps at the bolt pads
evenly spaced . Gasket should not
be visible after tightening. The
Figure 772 couplings do not have
to meet Bolt Pad to Bolt Pad to
insure proper installation.
Caution -uneven tightening can
cause gasket pinching.
Note: Never remove any piping
component without verifying
that the system is
depressurized and drained.
Central No. 18-5.0
Central Grooved No. 1.1.0
Figure 772 Grooved Coupling
B C
A
Pipe
Max. *
End Gap
Max.t
Pressure
Dimensions
Bolt
Size**
Bolt
Torque
Net
Wt.
O.D.
A
B
C
Size
Inches
Inches
psi
Inches
Inches
Inches
Lb. -ft.
Lbs.
Dia.X Lg.
MM
MM
KPa
MM
MM
MM
_Nm
Kg,
i 1 41
1.660
0.06
750
2.75
4.38
1.81
3/ 8" x 21/4"
30
1.0
42.2
1.5
5171
699
111.3
46.0
41
0.1
11/2"
1.900
0.08
750
3.00
4.62
1.81
3/8" x 2/4"
30
1.0
4&3
2.0
5171
76.2
1 1173
46.0
41
0.1
2.
2.375
0.13
750
3.41
5.12
1.88
'18" X 21/4"
30
1.5
60.3
3.3
5171
86.6
130.0
47.8
41
0.7
2.875
0.13
750
3.91
5.63
1.88
3/;' x 2'/4"
30
2.5
73.0
3.3
5171
99.3
14
47.8
41
1.1
76.11,nm
3.000
0.13
750
4.19
5.72
2.00
M10x 57
30
2.6
76.1
3.3
5171
1064
145.3
50.8
41
1.2
3.500
0.13
750
4.63
6.25
1.88
3/8" x 21/4"
30
2.6
86.9
3.3
5171
117.6
156.8
47.
41
1.2
4"
4.500
0.19
750
5.81
7.50
1.97
3/8" x 2'/4"
30
3.5
114.3
4.8
5171
147.6
190.5
50.0
41
1.6
6.
5.563
0.19
750
7.09
9.72
2.06
5/8" x 31/�'
90
7.5
141.3
4.8
5171
180.1
246.9
52.3
122
3.4
165.1mm
6.500
0.19
700
8.09
10.53
2.13
M16x 83
90
7.6
165.1
4.8
4827
205.5
2673
54.1
122
3.5
61
6.625
0.19
700
8.09
10.53
2.13
5/8" x 31/4"
90
7.6
166.3
4.8
4827
205.5
2675
54.1
122
3.
8"
8.625
0.19
600
10.56
13.56
2.62
3/4" x 43/4"
150
18.0
219.1
1 4.8
4137
268.2 1
344.4
66.5
203
8.2
191
10.750
0.13
500
12.84
16.41
2.62
1" x 61/2"
200
24.6
273.0
3.3
3448
326.1
416.8
66.5
271
11.2
1Z,
12.750
0.13
400
15.41
18.84
2.62
1" x 61/2"
200
42.0
323.4
3.3
2756
391.4
478.5
66.5
271
19.1
* Maximum available gap between pipe ends. Minimum gap = 0.
t Maximum pressure and end load are total from all loads based on standard weight steel pipe. Pressure ratings
and end loads may differ on other pipe materials and/orwall thickness. Contact Central for details. See Fire
Protection Equipment Submittal Sheet for Listing and Approval pressure ratings.
**Metric bolt size used on 76.1 mm and 165.1 mm couplings.
Ordwnring
0 1
I a -elf ormati Won
Ordering Information: When
placing an order, indicate the full
product name. Please specify the
quantity, figure number, type of
gasket, EPDM "A", "E" or Nitrile "T",
and size.
Availability and Service: Central
Grooved Piping Products, valves,
accessories and other products are
available throughout the U.S.,
Canada, and internationally, through
a network of Central distribution
centers. You may write directly to
Central, or call 215-362-0700 for the
distributor nearest you.
I I - Ew t T. 1! 0 2 � 3�mll
@1998 Central Grooved Piping Products
Printed in U.S.A.
Warranty: Central will repair and/or
replace any products found to be
defective in material or workmanship
within a period of one year from the
date of shipment. Please refer to
the current price list for further
details of the warranty.
772.09.98
�1 91 IIIJ
Thr11_,,'1'__,1
U
Ductile Iron
ANSI B16.3
Manufactured by: Central Grooved Piping Products, Inc. a subsidiary of
Central Sprinkler Company
451 North Cannon Avenue, Lansdale, Pennsylvania 19446
EProduct
Descrin%tion
F
Cent ral Ductile Iron threaded fittings
conform to ANSI B16.3 and are
higher in strength and more corrosion
resistant than cast iron fittings. The
additional strength is provided by the
ductile properties making up the
fitting. This is accomplished by
adding magnesium while the iron is
being poured into its final cast shape.
This provides an advantage as the
fittings are not as susceptible to
leaks or cracking and they are also
lighter than standard cast iron.
Caution: Installers who have not
used ductile iron threaded fittings
before should be instructed that
the fitting is stronger than the pipe
and over -tightening the fitting can
create leaks and cause damage to
pipe threads. In general, there is
about one-half a,turn difference
between cast iron and ductile iron
fittings. Apply Teflon tape or high
quality pipe joint compound on the
pipe threads and tighten two to
three turns beyond hand tight. If
you are using an automatic make -
on machine, please exercise
caution in setting your machine to
the proper parameters prior to
tightening fittings onto the male
pipe threads.
Technical
D
ata
Model: 811, 812, 813, 814, 815, 816,
817, 818, 820, 825, 825B,
827,830,719
Style: Elbows, Tees, Unions, Caps,
Extension Pieces, Bushings,
Couplings and Plugs
Wrench: Standard Pipe Wrench
Thread: N.P.T.
Material: Ductile Iron
Maximum Working. Pressure: 300 psi
Weight: See Chart
W
Approvals: U.L., U.L.C., F.M.
(See Central Grooved submittal
sheet for exact ListinglApproval
information.)
F -Oz r
A
L
Apply Teflon tape or high quality pipe
joint compound on the pipe threads
and tighten two to three turns beyond
hand tight.
No. 21-3.0
Central Grooved No. 9.1.0
90' Elbow
Model 811
=D-,
90' Reducing
Elbow
Model 812
B
45' Elbow
Model 813
A
900 Elbow - Model 811
Size
A
B
Part #
Wt.
(lbs.)
Box
City.
Ih
1 Va
'/,6
86206
.24
240
'14
15/m
Y4
86205
.40
120
1
Vh
"hs
86200
.64
70
1 V4
-il/T
1 '/4
1 '/is
86201
.95
40
.53
llrlh.
Vh,
86202
1.24
30
2
21/4
11/2
86203
1.74
20
21/2
211h.
1 sh,
86204
3.28
10
90'Reducing Elbow - Model 812
Size
A
B
C
D
I Part #
Wt..
Lbs
Box
City.
'/4 X 1/2
11/16
13/16
1/8
'/a
86342
.33
160
1 X V2
1 '14
1 '/8
'/is
Ilh.
86210
.44
110
1 X 3 14
13/0
17/16
11/16
7/ a
86211
.53
90
11/4 X '/2
1 '/16
1 Y2
'/a
11/,6
86212
.64
75
1 1/4 X 3 /4
17/16
15/8
3 A
1 '/16
86213
.75
60
11/4 X 1
11/16
111/16
7/8
1
86214
.77
55
1 % X 3 /4
11/2
13/4
3 A
13/,6
86221
.95
45
1 Ih X 1
1-1/8
113/16 1
7 /a
I IA
86215
.99
40
1 % X 1 V4
113/ 16
17/8 1
11/.
13/16
86216
1.14
35
2 X 3 /4
15/. 11
IF,/,.
7/.
13h
1 86217
1 .39
30
2 x 1
13 14
2/16
2
Vh6
86218
1.58
25
2 x 11/2
2 J2
3/16
11/4
17/16
86220
1.67
20
21/2 x 2
E2 3 /a
21/a
11/4
17/8
869r,
1 86244
1.03
450 Elbow - Model 813
Size
A
B
Part #
Wt.
(lbs.)
-13
A
7/a
3/8
86780
Ductile
Iron Tee
3/4
Mo... 514
450 Elbow - Model 813
Size
A
B
Part #
Wt.
(lbs.)
Box
Pty.
1/2
7/a
3/8
86780
.22
250
3/4
1
'/16
86781
.33
150
1
11/a
'3h6
1 86280
.48
90
11/4
15/,6
'/a
86281
.73
50
11/2
1 '/16
'Ym
86282
.93
35
2
111/16
`/16
86283
1.55
18
2'/2
1 "/16
1
86782
2.70
12
Tee - Model 814
Size
A
B
Part #
Wt.
(lbs.)
Box
City.
1/2
V/s
'/is
86340
.33
150
3/4
11/16
3 A
86341
.50
90
1
11/2
13/,6
86230
.85
60
1114
1 '14
Vhs
86231
1.30
35
Vh
11-1/16
13/15
86232
1.63
24
2
21/4
11h
86233
2.63
12
2'/2
2"/m
Vhs
86234
4.55
8
I -F
Ductile Iron Tee - Reducing - Model 815
Size
A
B � C D
E
IF
Part #
Wt.
Lbs.
Box
City.
3/4 X 3/. X
13/,.
13/,.l 11/4 1 5/,
5/11
11/16
86235
.46
95
'14 X '/4 X
11/16
111,61 13/, 1 1/8
7 /.
I lh.
86755
.68
65
I X 1/2 X
11h
13/-j 11h 1 13/ Is
13A
13/1.1
86236
.70
55
1 X 3/4 X 1h
11/4
13/,.l 13/. 1 9/,,
5/-
Ilh.
1 86756
.63
1 80
I X 3/4 X 1/,
13/s
15/,6 1 7he 'Vis
3/4
1h
86757
.68
65
1 X 3/, X I
Vh
17/16 Vh 13/16
7/a
'3/16
86237
.77
55
1 X 1 X Ih
11/4
11/4 1 3/a 9/16
9/,6
13N
86238
.66
65
1 X 1 X 3/4
13/8
13/8 17/16 11/10
"/,a
Ih
86239
.73
60
1 X 1 X 1 '/4
111/16 11 Vie 19/16 1
1
7 /a
86240
.97
45
1 X 1 X 1 Ih
113/,. 1 13/,� 15/. 11/.
1 V.
j 7A
86241
1.14
35
1 V4 X 1 x Ih
1'5/,-
V/4119h- sh
9h.
1 1
86242
.81
50
1 '/4 X 1 X 3 A
1 '/16
13/8 15/8 'A
I V16
11/16
86243
.90
50
1 '/4 X 1 X 1
19/16
1 V2 111/16 7/8
11/16
1
1 86244
1.03
45
11/4 X 1 X 1 '/4
13 /4
V/11 1 '/4 1 Vis
1
1 '/is
86245
1.10
40
1 '/4 X 1 X 11/2
17/8
113/,, 113/,, 13/1,
11/8
11/16
28246
1.43
30
11/4 X 11/4 X V2
1 3/a
13/8 11/16 11/16
11/16
1
86247
.87
45
1114 X 11/. X 3 /4
17/11
1 '/1. 15/. 3/4
3/4
1 Ih.
86248
.96
45
1 'A X 1 '/4 X 1
1 '/,1
1'/J. 1"/,s 7/.
1A
1
86249
1.10
40
1 1h x 11/4 x 11h 17/8
11/8 111/16 113/16
113/1,
11/16
86250
1.50
30
11/4 x 11/4 x 2
21/s
2% 2 17/16
17/6
1 Va
86251
2.00
24
1 '/2 X 1 X '/2
17/16
V/16 1 "/16 '1116
V8
1%
86252
.97
40
1 V2 X 1 X 3 /4
11/2
13/8 13/4 3/4
11/16
13/ 16
86253
1.14
40
1 V2 X I X 1
1%
Vh 113/16 '/a
'3/16
1 Ya
86254
1.14
30
11h x 1 x 11/2
1 '-1/,. 113h, 1"/,6 11/,s
11/6
13/ 16
86255
1.52
30
1 V2 X 1 V. X %
17/16
1 VIS 1 "/16 11/16
Va
1 Va
86257
1.03
40
11/2 X 1 V4 X 3/4
11h
11/,. 13/4 3/4
1/4
1 3/16
86258
1.10
40
1 1h X 1 '14 X 1
1 '/.
1 '/16 1 "/16 '/8
7/8
1 Va
86259
1.31
30
1 V2 X 11/4 X 2
2 3/1 s
21/a 2 17/16
1 '/16
1114
86260
1.94
20
11/2 X Vh X V2
17/16
1 '/16 11 '/,. '1/16
"/is
1 Va
86261
1.14
35
1 1h x I Ih x 3/4
11h
11h 13/4 1/4
3/.
1 3/,s
86262
1.23
35
1 V2 X 11/2 X 1
1 '/8
1 V. 1 '3/16 7/8
7/8
1 Va
86263
1.38
30
11h x 11h x 1 V. 113/,6 113h 17/8 11/16
11/16
13/le
86264
1.50
30
1 Ih x I Ih x 2
23h.
2 3/16 2 V/is
I'lis
V/4
86265
2.00
20
2 x 1 x 2
21/4
2 2'/4 11h
1 'ha
11h
86266
2.18
15
2 x 1114 x 2
2'/4
2'/a 21/4 Vh
17ho
11h
6267
2.31
15
2 x 11h x 1h
Vh
1 '/16 1 '/$ 3/4
"/is
Vha
86268
1.50
30
2 x I % X 3/,
1%
11h 1 "/16 '/a
3/4
13/a
86269
1.61,
25
2 x 1 V2 X 1
1114
11/s 2 1
7h
Vm
86270
1.65
20
2 x 11/2 x 11h
21/1.
1 'Vif 23hs 1 '/16
Vh6
1'/16
86272
2.03
20
2 x V/2 x 2
21/4
2 3/ 16 21/4 11/2
17/iG,
11h
86273
2.37
15
2 x 2 x 1h
11/2
11/2 11/8 3/4
3/4
11/16
86222
1.50
30
2 x 2 x 3/4
V/a
V/s 1 `hs 7/s
'/a
13/a
86223
1.67
20
2 x 2 x 1
13/4
13 A 2 1
1
15/16
86224
1.91
20
2 x 2 x 11/4
17/a
17/s. 2'/s V/s
1 V$
1 '/16
86225
2.05
20
2 x 2 x 11/2
2
2 2 3/16 1114
11/4
Vh
86226
2.11
15
2 x 2 x 2'h
25/s
2 5/8 13/4
17/8
17 /16
86227
3.67
10
21h x 2 X 3/4
13/4
11/. //18, r,/s
13/4
86274
2.22
15
Reducing Coupling
Model 816
Reducing Coupling - Model 816
Size
A
B
Part#
Wrench
Wt.
(lbs.)Qty.
Box
1 X 'h
1 "/,6
1h
86228
1114
.38
200
1 x 1/4
11/4
1h
86229
11h
.53
110
A-: -A-
-C-;
Cross - Model 817
Size
A
B
C
C
D
Part #
Wt.
(Ibs.)
Box
Oty.
11/a
11/2
11/2
3
13/,,
/ ' 6
13/,.
86284
.97
45
1 V4
13/4
13/4
1
Vba
86285
1.59
25
V/2
1 "/16
115/m
V/16
1]
1'/,6
86286
1.89
20
2
21/4
2/4
V/2
V/2
86287
2.93
10
1 '/4 X 11/4 X X 1
1 '1/18
1'/16
1
1/8
86289
1.25
30
11/2 X 11/2 X X 1
113/16
11/8
11/16
1 "/16
86322
1.48
24
2x2xl x1
2-
13/4
11/4
VbB
86291
2.64
10
Straight Coupling
Model 818
Straight Coupling - Model 818
Size
A I B
I Part #
Wt*
Wrench (Ibs.)
Box
Qty.
1/2
1 Ya IN
72779
11/a
.18
360
3/4
Ish 9/is
72778
13/a
.26
200
1
13/4 3/a
72755
111/16
.44
110
11/4
2 9/16
72754
2
.54
75
1 V2
23/16 '14
72753
21/4
.71
60
k2
25h 1 1h
72752
2 3/4
1.15
30
21/2 1
3 3/4 172758
22445
3 3 A
2.29
18
Cap
Model 820
CaD - Model 820
Size
A
Part #
Wt.
(lbs.)
Box
Qty.
1 /2
7/,
72776
.15
500
3 A
1
72777
.22
300
1
13/ 16
72824
.33
180
1 '14
15/16
72756
.54
110
11h
13/8
72822
.68
80
2
1 V2
72823
.96
45
21h
13/4
72825
1.80
25
Extension Piece
Model 825 & 825B
rMEN
1l
Hex Bushing
Model 827
Extension Place - Modpi R2-9
Size
A
Part #
Wt.
(Ibs.)
Box
Qty.
V2 x 1 1h
Vh
72751
.20
300
1/2x 2
2
2980
.27
50
3/4 X 11/2
Vh
F2981
22
250
3/4x 2 1
2
73932
.31 1
200
Brass Extension Piece - Model 825B
1hx1
1
72826
-708
600
V2 X 11/4
1 V4
72827
.10
490
'h x 1 '12
1 V2
72828
.13
490
112 x 2
2
22445
.18
250
'/2x 21h
21 1h
i2 4 4-6
.22
200
Hex Bushino - MndAl A107
Size
A
Part #
Wt.
(lbs.)
Box
Qty.
I X 1/2
11/1.
72726
.22
280
1 X 3/4
11/16
72762
--718-
2-80
1 '14 X 1
-Thx
13/,-
-72763
.31
150
1
11/4
72757
.53
100
11hx V/4
-x -I
11/4
-v/�
72764
.35
100
:i
--
-ix
2%
-T2761
.75
80
1'/,
-1h
13/6
-1'/a
31A
.69
80
Yx I
,
727-75 1
--
*62 ,
80
Brass Seat Union - Model 830
A
Brass Seat Ductile
Iron Union
Model 830
= nm�w
Ductile Iron Plug
Model 719
Size
A
B
Part
I Wt.
(Ibs.)
Box
Qty.
1/2
-TI
17/a
"/16
86207
.47
110
86293
2
15/16
-i6275
-
.66
80
1
2 3116
'3/,6
86276
1.08
50
11/4
21/2
1 Ih6
86277
1.54
35
1 V2
2%
13/16
86278
2.03
25
12
31A
VLL,86279
i 3.15
18
Ductile Iron Plun - Modal 71Q
Ize
A
Part #
Wt.
(lbs.)
Box
Qty.
1/,
1'h6
86292
.10
500
3/,
V/s
86293
.18
300
1
VA
86294
.28
200
11/,
134 '-i6295
.50-
110j
1 '/2
17/ 16
86296
.70
80
2
V/2
86297
.90
45 1
M
iN
401
4 904
Ductile iron threaded fittings do not
require special on-going mainte-
nance. However, the entire system
must be maintained in accordance
with NFPA Standard 25 entitled,
"Inspection, Testing and Maintenance
of Water -Based Fire Protection
Systems".
Ordering Information: When
placing an order, indicate the full
product name. Please specify the
quantity, model and style.
Availability and Service: Central
sprinklers, valves, accessories and
other products are available through-
out the U.S. and Canada, and inter-
nationally, through a network of
Central Sprinkler distribution centers.
You may write directly to Central
Sprinkler Company, or call 215-362-
0700 for the distributor nearest you.
Guarantee: Central Sprinkler
Company will repair and/or replace
any products found to be defective in
material or workmanship within a
period of one year from the date of
shipment. Please refer to the current
price list for further details of the
warranty.
Conversion Table:
1 inch 25.400 mm
1 foot 0.3048 M
1 pound = 0.4536 kg
1 foot pound = 1.36 Nm
1 psi = 6.895 kpa
= 0.0689 bar
= 0.0703 kg/cM2
Conversions are approximate.
to's
Central Sprinkler Company
451 N. Cannon Avenue, Lansdale, PA 19446
@1994 Central Sprinkler Company Phone (215) 362-0700
Printed in U.S.A. FAX (215) 362-5385 D. I. Scwd.1
J The AGF Manufacturing Inc. Model 1000 TESTANDRAIN Provides Both The Test
Function And The Express Drain Function For A Wet Fire Sprinkler System.
U The Model 1000 Complies With All Requirements Of NFPA-1 3, NFPA-1 3R,
And NFPA-13D.
LI The Model 1000TESTANDRAIN IsASingle Handle BallValveThat Is LightWeightAnd
Compact, Includes A Tamper Resistant Test Orifice, Integral Tamper Resistant Sight
Glasses, And Is 300 PSI Rated.
D Available In A Full Range Of Sizes From 3/4" To 2'.' NPT & BSPT, With All Specifiable
Orifice Sizes 3/8", 7/16", 1/2", 17/32", 5/8" (ELO), & 3/4" (ESFR).
J The Orifice Size Is Noted On The Indicator Plate And The Valve Is Tapped For
A Pressure Gauge.
LJ Locking Kit Available Which Provides Superior Vandal Resistance And Prevents
Unintentional Alarm Activation.
0 'tour New Aut,
Visit us Qq 40
on the Internet
at
10/00
PLAN VIEW
A
I
B
TO DRAIN
C
i a
FRONT VIEW/HORIZONTAL INSTALLATION
ORIFICE SIZE
AVAILABLE - 3/8, 7/16, 1/2, 17/32, ELO(5/8)*, ESFR(3/4)*
DIMENSIONS - INCHES
FRONT VIEWNERTICAL INSTALIATION
FROM BRANCH
I
,--IV
STREET EL
GAUGE INLET
PROVIDED
TO RAIN
STREET EL
OR PIPE
TO DRAIN
RIGHT HAND/STRAIGHT INSTALLATION
APPROVALS:
J LIL and ULC Listed
:1 FM Approved except 3/4"
-3 NYC -BSA NO. 720 -87 -SM
J CA. State Fire Marshall
SIZE
A
B
C
D
E
F
G
H
3/411
5 '/16"
128mm
1 1/2"
37.58mm
2 3/16"
55.65mm
3 5/811
93.23mm
3 3/811
85.. 8mm
1 13/16"
45.30mm
4 9/16"
117.12mm
63/811
162.42mm
5 1/16"
128mm
1 1/2"
37.58mm
2 1/4'
55.65mm
3 5/81'
93.23mm
3 3/811
85.88mm
1 13/16"
45.30mm
4 9/16"
117.12mm
6 3/811
162.42mm
1/4,,
5 7/16"
137.70mm
1 11/16"
42.70mm
2 9/16"
65.36mm
4 1/4"
108.36mm
3 5/16"
82.84mm
1 15/16"
50.89mm
5 9/16"
141.39mm
5 1/2"
192.28mm
1/211
67/16
163.38m'm'
1513/1611
4 .50mm
�5'4"
. omm
5 1/16"
1 27mm
3 7/8"
99.18mm
2 5/8"
66.97mm
8 1/4"
206.63mm
10 /811
273.60mm
2 11
6 7/16"
163.38mm
1 13/16"
45.50mm
3 1/4"
81.50mm
5 1/161f
127mm
3 7/811
99.18mm
2 5/8"
66.97mm
81/4"
206.63mm
10,/8"
273.60mm
PART:
MATERIAL:
HANDLE
STEEL
STEM
ROD BRASS
BALL
C.P BRONZE
BODY
BRONZE
VALVE SEAT
IMPREGNATED TEFLON
INDICATOR PLATE
STEEL
HANDLE LOCK
SPRING STEEL
rt
-TV-IM VAM-
Soft Seat
Central Sprinkler Company
451 North Cannon Avenue, Lansdale, Pennsylvania 19446
EProduct
IDescription
The Central Model F16 Bronze
Angle Valves are designed for
general service as shut-off, throttling,
or drain valves.
The Central Model F16 Bronze
Angle Valves provide positive shut-off
under normal operating conditions.
They are recommended for water
service only.
The Central Model F16 Bronze
Angle Valves are of cast bronze
construction strictly in accordance
with ASTM B-62 specifications 85-5-
5-5 for superior corrosion resistance.
The hand wheel is manufactured
from cast iron materials to meet or
exceed the requirements of
Underwriters Laboratories, Inc.,
Factory Mutual, The American Water
Works Association C-509 and ASTM
A-126, Class B Standards.
The Central Model F16 Bronze
Angle Valves are rated with cold
water at 200 psi, non -shock for cold
water service, and are tested twice,
air under water for consistent quality.
The Central Model F1 6 Bronze
Angle Valves have a soft rubber seat
for tight shut-off under all operating
conditions. (Mfg. Source: Non -
Domestic)
Dimensions - Weights
Size
A
B
C
(closed)
wt.
(lbs)
Y2 "
1.08
2.10
3.09
.69
Y4 "
1.24
2.41
3.30
.94
ill
1.49
1 2.75
3.80
1.76
1 Y41'
1.75
2.90
4.40
2.50
1 Y2"
1.97
3.25
4.65
3.26
2"
2.20
3.68 1
5.90 1
5.32
No. 27-2.0
Central Sprink No. 4-6.0
Bill of Materials
Item
Description
Material
Specification
1
Wheel Nut
Brass
ASTM B-16
2
Name Plate
Aluminum
Commercial
3
Hand Wheel
Cast Iron
ASTM A-1 26
4
Stem
Brass
ASTM B- 16
5
Packing Nut
Brass
ASTIVI B-16
6
Gland Packing
Teflon*
7
Bonnet
Bronze
ASTM B-62
8
Disc
Bronze
ASTM B-62
9
Disc Nut
Brass
ASTM B- 16
10
Body
Bronze
ASTIVI B-62
11
Seat
EPDM
Commercial
12
Washer
Brass
ASTM B-16
13 1
Nut
Brass
ASTIVI B-16
*Teflon is a registered trademark of the DuPont Corporation.
@ 1991 Central Sprinkler Company
Printed in U.S.A.
16-M �
0,
I AIL
Central Sprinkler Company
451 N. Cannon Avenue, Lansdale, PA 19446
Phone (215) 362-0700
FAX (215) 362-5385
ff' -If 4MA'i
ft
g1r.
Ordering Information: When
placing an order, indicate the full
product name. Please specify the
quantity, model number, style, orifice
size, temperature rating, type of finish
and sprinkler wrench.
Availability and Service: Central
sprinklers, valves, accessories, and
other products are available
throughout the U.S. and Canada; and
internationally through a network of
Central Sprinkler distribution centers.
You may write directly to Central
Sprinkler Company or call (215) 362-
0700 for the distributor nearest you.
Guarantee: Central Sprinkler
Company will repair and/or replace
any products found to be defective in
material or workmanship within a
period of one year from the date of
shipment. Please refer to the current
Price List for further details of the
warranty.
Patents: Patents are pending.
Conversion Table:
I inch 25.400 mm
1 foot 0.3048 m
1 pound = 0.4536 kg
1 foot pound = 1.36 Nm
I psi = 6.895 kpa
= 0.0689 bar
= 0.0703 kg/cm2
1 U.S. gallon = 3.785 dm3
= 3.785 liters
Conversions are approximate.
F16.0
W. -
Tr 0 'm �IE
X aw
'S�
7727'
Soft Seat
TZIM AM
Central Sprinkler Company
451 North Cannon Avenue, Lansdale, Pennsylvania 19446
Product
a .
Description
The Central Model F15 Soft Seat
Bronze Globe Valves are designed
for general service as shut-off,
throttling, or drain valves.
The Central Model F15 Soft Seat
Bronze Globe Valves provide positive
shut-off under normal operating
conditions. They are recommended
for water service only.
The Central Model F15 Soft Seat
Bronze Globe Valves are of cast
bronze construction strictly in
accordance with ASTM B-62
specifications 8.5-5-5-5 for superior
corrosion resistance. The hand
wheel is manufactured from cast iron
materials to meet or exceed the
requirements of Underwriters
Laboratories, Inc., Factory Mutual,
The American Water Works
Association C-509 and ASTM A-126,
Class B Standards.
The Central Model F15 Soft Seat
Bronze Globe Valves are rated with
cold water at 200 psi, non -shock for
cold water service, and are tested
twice, air under water for consistent
quality.
The Central Model F1 5 Soft Seat
Bronze Globe Valves have a soft
rubber seat for tight shut-off under all
operating conditions. (Mfg. Source:
Non -Domestic)
Dimensions - Weights
Size
A
B C
wt.
Lbs.
Y211
2.05
2.60 2.09
.66
Y411
1 2.36
2.70 , 2.24
.83
ill
2.68
3.50 2.46
1.50
1 Y41.
3.08
3.85 2.85
2.13
1 Y2"
3.46
4.30 3.22
3.06
4.00
1 5.10 3.43
4.88
No. 27-1.0
Central Sprink No. 4.5.0
Bill of Materials
Item
Description
Material
Specification
1
Body
Bronze
ASTM B-62
2
1 Bonnet
Bronze
ASTM B-62
3
Stem
Brass Rod
ASTM B-16
4
Disc Holder
Brass Rod
ASTM B-16
5
Seat Disc
NBR
Commercial
6
Disc Holder Nut
Brass Rod
ASTM B- 16
7
j Disc Nut
Brass Rod
ASTM B-1 6
8
Packing Nut
Brass Rod
ASTM B-16
9
Packing Gland
Brass Rod
ASTM B-16
10
Packing
PTFE
Commercial
11
1 Hand wheel
Cast Iron
ASTM A-1 26-B
12
Ident. Plate
Aluminum
ASTM B-209
13
Wheel Nut
Brass Rod
ASTM B-16
@ 1991 Central Sprinkler Company
Printed in U.S.A.
IN , 11 1-1 i-_ - P:
eX.
Ordering Information: When
placing an order, indicate the full
product name. Please specify the
quantity, model number, style, orifice
size, temperature rating, type of finish
and sprinkler wrench.
Availability and Service: Central
sprinklers, valves, accessories, and
other products are available
throughout the U.S. and Canada; and
internationally through a network of
Central Sprinkler distribution centers.
You may write directly to Central
Sprinkler Company or call (215) 362-
0700 for thedistributor nearest you.
Guarantee: Central Sprinkler
Company will repair and/or replace
any products found to be defective in
material or workmanship within a
period of one year from the date of
shipment. Please refer to the current
Price List for further details of the
warranty.
Patents: Patents are pending.
Conversion Table:
1 inch = 25.400 mm
I foot =.0.3048 m
1 pound = 0.4536 kg
1 foot pound = 1.36 Nm
1 psi 6.895 kpa
0.0689 bar
0.0703 kg/cm2
1 U.S. gallon = 3.785 dm3
= 3.785 liters
Conversions are approximate.
Central Sprinkler Company
451 N. Cannon Avenue, Lansdale, PA 19446
Phone (215) 362-0700
FAX (215) 362-5385
F15.0
X Inch
Central Sprinkler Company
451 North Cannon Avenue, Lansdale, Pennsylvania 19446
r-roduct
Lpescription
The Central Model F17 3 -Way
Bronze Globe Valves are designed
for general service as shut-off,
throttling, or drain valves.
The Central Model F17 3 -Way
Bronze Globe Valves provide positive
shut-off under normal operating
conditions. They are recommended
for water service only.
The Central Model F1 7 3 -Way
Bronze Globe Valves are of cast
bronze construction in strict
accordance with ASTM B-62
specifications 85-5-5-5 for superior
corrosion resistance. The hand
wheel is manufactured from cast iron
materials to meet or exceed the
requirements of Underwriters
Laboratories, Inc., Factory Mutual,
The American Water Works
Association C-509 and ASTM A-1 26,
Class B Standards.
The Central Model F17 3 -Way
Bronze Globe Valves are rated with
cold water at 200 psi, non -shock for
cold water service, and are tested
twice, air under water for consistent
quality.
The Central Model F1 7 3 -Way
Bronze Globe Valves have a soft
rubber seat for tight shut-off under all
operating conditions. (Mfg. Source:
Non -Domestic)
ft
Bill of Materials
Item
Description
Material
Specification
1
Body
Bronze
ASTM B-62
2
Hand Wheel
Cast Iron
ASTM A-1 26-B
3
Hand Wheel Nut
Steel
Commercial
4
Packing
Non -Asbestos
Commercial
5
Packing Gland
Brass
ASTM B-16
6
Packing Nut
Brass
ASTM B-16
r 7
Stem
Brass
ASTM 13-�16
No. 27.3.0
Central Sprink No. 4-7.0
Ordering Information: When
placing an order, indicate the full
product name. Please specify the
quantity, model, style, orifice size,
temperature rating, type of finish or
coating, and sprinkler wrench.
Availability and Service: Central
sprinklers, valves, accessories, and
other products are available through-
out the U.S. and Canada, and
internationally, through a network of
Central Sprinkler distribution centers.
You may write directly to Central
Sprinkler Company, or call (215) 362-
0700 for the distributor nearest you.
Guarantee: Central Sprinkler
Company will repair and/or replace
any products found to be defective in
material or workmanship within a
period of one year from the date of
shipment. Please refer to the current
Price List for further details of the
warranty.
Patents: Patents are pending.
Conversion Table:
1 inch 25.400 mm
1 foot 0.3048 M
1 pound = 0.4536 kg
I foot pound = 1.36 Nm
1 psi 6.895 kpa
0.0689 bar
0.0703 kg/cM2
1 U.S. gallon = 3.785 dM3
= 3.785 liters
Conversions are approximate.
Central Sprinkler Company
451 N. Cannon Avenue, Lansdale, PA 19446
@ 1991 Central Sprinkler Company Phone (215) 362-0700
Printed in U.S.A. . FAX (215) 362-5385
F17.0
lif
Manufacturers qf
PIPE HANGERS BEAM CLAMPS
STRUT SEISMIC BRACES
IWANICIAN11's
I:yl:s
RINOS
U-110OKS
0 0
0
PVC
SEISMIC
I
Michigan Hanger Co., Inc@
Main Ofliceand Plant Western Plant and Distribution Center
931 Summit Ave. Niles. OH 44446 10720 Mulberry Ave. Fontana, CA 92335
Phone: (216) 544-4700 Fax: (2 16) 544-5403 Phone.: (909) 355-0664 Fax: (909) 355-4590
TOLL FREE: (800) 333-0852
Model#300-C
Retainer Strap
k�RS
HELD
BEND IVA
C-!-- ---- -
L
W =/��
X
Model #301
Beam Clamp
Universal/Reversible
(Single Rod Hole)
M I C 14 16AA1 MQW?
C-3
SIZE RANGE: 3/8" thru 7/8" ��izes:
611.1 8", 10". 12" and 14" le 9911. (1.)
ZMATERIAL: Pre,galv- zed carbon steel
"ER'A '.* Pr '
L ' 'I
"' v
ALTERNATE MA RIAL OR FINISH: HDG
-d
t o ut-1 L
-3 1() 1
Sperod
-c-ly
width)T
SERVICE: To utilized when a retainer strap is spccil'ied with
Models: #3 , #301, #310 Reani Clanips
ORDE' G: Specil'y rod size. length (I.) (order 2" lon-cr than bearn
Ilan w.dth).ntodel number and name.
L
T T hanger rod to secure.
. F , 1� bell a, use
E: Field bend and use jan) nut ovei
RS
11
W
3/9"
6", 9", 10", 12", 14"
1"
1/2"
6", 9", 10". 12". 14"
1"
5/8'
6". 8". 10". 12". 14"
1- 1/4
3/4"
6", 8", 10", 12", 14"
2"
7/8"
1 0". 8% 10", 121 ", 14 "
1 2"
SIZE RANGE: 3/9" rod size
IZI
MATERIAL: Malleable iron castino with a hardened CLIP IX)int set screw
and lockthit.
A ICL ALTERNATE MATERIAL OR FINISH: EG. HDG
MRI 0 44 AIIPROVAL: Factory Mtitual (FM)
LISTING: Underwriters Laboratories(L)L)
3/4' C5 CONFORMS WITH: Federal Specification WW-H-171(Typc 19 & 23).
Malhit'actUrers Standardization Society ANSI/MSS-SI'-58 (Type 19 & 23)� install
Rs — in accordance with ANSI/MSS-SP-69.
SERVICE: lian,zerrc)datt,,ictiilleilt(witililI ite adjustment) to tol; or bottom of'
L- fin
TOP BOTIOM nictal bearns, purlins, channel or angle iron.
ORDERINC: Specif*y size. model numberand name
May be rnounled in NOTE: Set screw niust he tightened onto the sloped side of' the I-Beani,
cither position ange and torqued to 60 inch pounds.
FM /�_ channel or angle iron I],
UL
— 1� �/
nfl
MICHIGAN HANGER CO., INC.
Niles, OH
Max. recorn.
IRS
Max. pipe
MRI
F
load lbs.
1
size
1,0= Bottom
3/8"
4"
7/16"
1/2"
3/8"
1/4" 50) I_ 250
nfl
MICHIGAN HANGER CO., INC.
Niles, OH
Model #510
Riser Clamp
N
Model #355
Steel Concrete Insert
Model #355N
Steel Concrete Insert Nut
w
T
H
W
L KN40C
UT
L 0
' 4
L
KN U
OUT
Model#35
#355N
- 12 -
SIZE RANCE: 1/2" thru 24" pipe sizes, (dimensions showtl thru 12" only)
MATERIAL: Carbon steel
ALTERNATE MATERIAL OR FINISH: EG, HDG. SS
CONFORMS WITIL F-c(icral Specification WW -11-171 (Type 9). Manufacturas
Standardization Society ANSI/MSS-SP-58 (Type 8): install in accordance
with ANSI/MSS-SP-69.
SERVICE.: For supporting steel pipc riwrs. Call he used'Aith both insulaled and lloll-
ORDERING: Specil*y pipe size. model number and narric.
Pipe
Max.
Max.
Max. recorn.
size
Max.
BS
load lbs.
1/2"
9-3/9"
3/8" x 1 1/4"
220
3/4"
9- 1/4"
3/9" x 1 1/4"
200
3/4"
9-7/8"
3/8" x 1- 1/4"
220
10"
9 3/4"
�1/8" x 1 1/4"
250
1 1/2"
9-519"
318" x 1- 1/4"
250
21,
10-7/8"
318" x 1- 1/4"
:Ioo
1/2"
10- 1/4"
3/9" N 1- 1/2"
400
11.
11-3/4"
318" x 1 3/4"
5()()
3- 1/2"
L; 3/16"
3/8" x 1-314"
000
4-
12-15110"
1/2" x 1-3/4"
750
5"
14 1/4"
1/2" x 1- 3/4"
1500
6"
15-1/2"
1/2" x 1-3/4"
1600
9"
IS- 1/4"
5/9" x 2- 1/4"
2500
10"
20 1/8"
5/8" x 2 1/4"
2500
12"
22-3/8"
5/8" X Y*
2700
SIZE' RANGE: #355: Onesi/e
#-155N: .1/8" (hrU 7/8" rod sizes
MATERIAL: Carbon Acel
ALTERNATI-' ' MATERIAL OR FINISH: I.:G
C0Nl110Rrv1S NVI'1,11: I:cticl-:11 Specificalion WW -11-171 (Type 19)� M;lnllf;lclllrcl`,
Sl�jlld;jj-jjizaiion Sociciv ANSUNISS-SP-58 iType 18): inslall ill accord;1 lice %kilh
ANSI/MSS-SP-69.
APPROVAL: Fjjcior�, Multial WNI) Ifiru K pipe Size
i.isTING:
SERVICE.:
#355: Asastruchiral alhich"110111 ill ;ill gradc,;ol'concrete. Knock-otilk-cellsinterior
ellipty(furingpour. Allow, for llorizollwl rodadjustillent till to
#355N: I kinger roil al(achinenl to he ilist-allcd inside Ofthe Model
#355 concrot, insert.
ORDERING: SpeCifVsi/e, Model 111.1inher and naille.
NOTE. insiaiiation: 'i)iace knockout side dowl, on colic' -etc fOrIll ',l1ld flail in lllilcc-
Wire IT' picce ol reinforcing r(itl ()It hollisides. Aftcr concrete pour, knockout CM1
he I-eilloved kiith �j screw driver. use with Model #355N Insert Nut, or Models:
#NLIT. #SIIRA. #SPRCStrLlt Nuts. I�od sliould he threjuled Ifiru the nut until it
fightensagninst the top ofthe ilbert,
C�
- 12-
#355N
Max.
Max.
Max. recom,
RS
Max.
Max. riworil.
roof siz
I
w
112"
pipe size
ad Ills.
14).
7/8"
5/8"
1200
3/4"
10"
1 _10
- 12-
#355N
Max.
Max. recom,
RS
pipe size
load His.
3/1411
2"
610
112"
3-1/2"
11.10
5/811
5"
1200
3/4"
6"
1200
7/8"
10"
1200
*Reduced support spacing is. required.
MICHIGAN HANGER CO., INC.
Niles, Ol I
15 -
SIZE. RANGE: 3/8" and 1/2" rod sizes
MATERIAL: Malleable iron
ALTERNATE MATERIAL OR FINISH: CP. I -G
SERVICE.: Structural attachment to support hall-cr rod from cellim-, (if -
ORDERING: Specify rod size. model miniherand name.
NOTE: Maximum loads Itre dependent on adCLIUaCV Of f"'INICIM'S alld S11 -110111'e.
n41(,U1&4AJ UAA61N
--f-D 4MU 9UAd-f21W VFW16AL rWN4,o
SIZE RANGE: 318" IIII-Li 4"pipe sizes (dimensions shmAn 1111-11 2" olll�
MATERIAL: Malleable ii -on haw,er, steel rivet and boll.
ALTERNATE MATERIAL OR FINISH: FG
CONFORMS WITH: Federal Specification WW -11-171 (Type 25).
NIM11.11'aCtUrers Standardization Society ANSI/MSS-SP-58 (Type 12): in.suill if]
accordance with ANSUNISS-SP-69.
SERVICE: Pipe SLIPPOI-11 tOl'SUNI)CIldilla" 11011-illsOkItCLI qaliomlr� pipe lilies.
Recolillilelided for k1se if) Coll LIIICIi011 Will) MOLICIS: H305 of- #365M. Allows for p]pill"
J
rifills close to ceilin"s of. Walls.
ORDERING: SpeCify pipe SiZC� Model IlUmher and name.
Model 4^6M
Mallea��*all Plate
1-15/16'1
MRI
RS
Model #455
Split Ring Stand Off Hanger
R S
MR1
CL
C_e
0
0
Pipe
.size
IRS
Max.
Max. recom.
RS
MR1
pipe size
load lbs.
3/8"
100
112"
�Ho
1/2",
�5/02--
5 3
190
3/4"
--f-D 4MU 9UAd-f21W VFW16AL rWN4,o
SIZE RANGE: 318" IIII-Li 4"pipe sizes (dimensions shmAn 1111-11 2" olll�
MATERIAL: Malleable ii -on haw,er, steel rivet and boll.
ALTERNATE MATERIAL OR FINISH: FG
CONFORMS WITH: Federal Specification WW -11-171 (Type 25).
NIM11.11'aCtUrers Standardization Society ANSI/MSS-SP-58 (Type 12): in.suill if]
accordance with ANSUNISS-SP-69.
SERVICE: Pipe SLIPPOI-11 tOl'SUNI)CIldilla" 11011-illsOkItCLI qaliomlr� pipe lilies.
Recolillilelided for k1se if) Coll LIIICIi011 Will) MOLICIS: H305 of- #365M. Allows for p]pill"
J
rifills close to ceilin"s of. Walls.
ORDERING: SpeCify pipe SiZC� Model IlUmher and name.
Model 4^6M
Mallea��*all Plate
1-15/16'1
MRI
RS
Model #455
Split Ring Stand Off Hanger
R S
MR1
CL
C_e
0
0
Pipe
.size
IRS
MR1
Max. recom.
load lbs.
Vxll
3/9"
5/8"
3/9-
100
112"
4/9-
5/8-
3/8-
190
3/4"
.1/81,
I.V 16'*
319"
IsO
I "
31s"
15/16-
31K
9
/4"
3/8"
1 1/8"
3/4"
1 X0
/2-
318"
1-9/10"
319"
180
3/8"
1-7/X"
3/4"
i 90
SIZE RANGE: 4" thru 10" pipe sizes
MATERIAL: Carbon steel
ALTERNATE MATERIAL OR FINISH: EG
SERVICE: Pipe nipple (with 6" of thread) welded to the pipe saddle. A pipe nut
allows for vertical adjustment in the pipe stanchion.
ORDERING: Specify pipe size. model number and name.
Model #7
Adjustable Pipe S p
U FAN
g
Pipe
PIN
C
size
4"
1- 1/2
10-5/8"
6"
9"
6"
1- 1/2"
11- 11/16"
6"
9"
9..
21,
1-2- 11/ 16"
6"
8"
1 101,
1 21,
1 13-3/4"
6"
91,
MICHIGAN HANGER CO., INC.
Niles, OH
-15-
21
SIZE RANGE: 1/4" thru 7/8" rod sizes
MATERIAL: Malleable iron
ALTERNATE MATERIAL OR FINISH: EG
CONFORMS WITH: Federal Specification WW -H-1 71 (Type 16),
Manufacturers Standardization Society ANSI/MSS-SP-58(Type 16);
install in accordance with ANSI/MSS-SP-69.
SERVICE: Intermediate attachment for various types of pipe supports
and structural attachments.
ORDERING: Speci rod size, model number and name.
Model ""47
Soc
Malleable ocket
RS --� J—
A
HS
H
RS
H
MRI
A
HS
Max. recom.
load lbs.
1/4"
1-3/4"
1/2"
5/8"
5/16"
230
3/8"
1-5/8"
5/8"
3/4"
3/8"
610
1/2"
1-7/8"
3/4"
3/4"
3/8"
1130
5/8"
2-1/8"
3/4"
15/16"
5/8"
1810
3/4"
2-1/2"
7/8"
1-3/16"
5/8"
2400
7/8"
2-7/8"
1-1/16"
1-1/4"
5/8"
2800
SIZE RANGE: 1/4" thru 1-1/4" rod sizes; UNC
6', 10' or 12' lengths (L)
MATERIAL: Carbon steel
ALTERNATE MATERIAL OR FINISH: EG, SS, HDG
SERVICE: To attach hangers to structural attachments without
threading the rod.
ORDERING: Specify rod size, length (L), model number and name.
NOTE: Low carbon; tensil: 58,000 psi; yield: 36,000 psi.
IRS
L
Lengths available
Max. pipe
size
Max. recom.
load lbs.
1/4"
Lengths available
3/8"
240
3/8"
Sizes available 2" thru 12" lengths
2"*
610
1/2 .'*
Available in
3-1/2
1130
_
5/8"
5"
1810
3/4"
6', 10', 12'lengths
6"
2710
7/8"
12"
3770
1.
* 3/81' RS - UL/FM approved thru 4" pipe size and 1/2" RS - UL/FM approved thru 8 pipe size
SIZE RANGE: 3/8" thru 5/8" rod sizes; UNC
2" thru 12" lengths (L), available in 1" increments
MATERIAL: Carbon steel
ALTERNATE MATERIAL OR FINISH: EG, HDG, SS
SERVICE: To attach hangers to structural attachments without
threading or cutting the rod.
ORDERING: Specify rod size, length, model number and name.
NOTE: Low carbon; tensil: 58,000 psi; yield: 36,000 psi.
Model#50
All Thread Rod
N10
NE
Model#51
Hanger Rod Stud
All Thi)read
--i �— RS
* 3/8" Rb - uLl�-m approveG inru,+ pipe 51it; -111U I
Michigan Hanger - ERICO 21
L
Max. pipe
Max. recom.
RS
Lengths available
size
load lbs.
3/8"*
Sizes available 2" thru 12" lengths
2"*
610
1/2"
in 1 " increments
3-1/2—
1130
* 3/8" Rb - uLl�-m approveG inru,+ pipe 51it; -111U I
Michigan Hanger - ERICO 21
28 W11416AA1 U41116Q-;e
Model#1 12
One -Hole Strap for CPVC Pipe
SIZE RANGE: 3/4" thru 1" pipe
3/16" 0. D. MATERIAL: Pre -galvanized carbon st
LISTED BY: Underwriters Laboratori nc. to U. S. and Canadian
safety standards
t
e-
h
a
ru
Iva
1
n iz
pi
e
pe
O -D. g ri rs " d ca rbon s Itn
rw te Laboratori c. to U S
V
C L SERVICE: To support C.P. or Polybutalene fire sprinkler piping in
horizontal position from t r side of beam, in Fire Sprinkler Systems
0
P 1 it th h
installed per %F. P. . 3, 13R and 13D, with the hanger tab upward
as r x S w #1 0
only*. F, sten ii - ardened Hex Head Screw, #10 x 1", supplied,
needs no pr illing.
Off et e for abrasion prevention and added strength.
Model#1 15
Swivel Loop Hanger
Heavy Duty
(NFPA Rod Sizes)
RS
.M ------- MR17
A
CL H
; OR[ ING: Specify pipe size, model number and name.
" Sp
If Ile
2"�
*If installed inverted, with the hanger tab downward it does
not function as a hanger, but as a restrainer. Do not install on the
bottom of a beam or under horizontal surface. For these
applications, see Model #108.
N
SIZE RANGE: 1/2" thru 8" pipe sizes
MATERIAL: Pre -galvanized carbon steel with a zinc electroplate
insert nut
APPROVED BY: Factory Mutual
LISTED BY: Underwriters Laboratories Inc. to U. S. and Canadian
safety standards
CONFORMS WITH: Federal Specification WW -H-1 71 (Type 10),
Manufacturers Standardization Society ANSI/MSS-SP-58 (Type 10);
install in accordance with ANSI/MSS-SP-69.
SERVICE: Pipe support manufactured to use minimum rod sizes
permitted by NFPA for fire sprinkler piping.
ORDERING: Specify pipe size, model number and name.
Pipe
H
CL
Max.Hanger
Pipe Size
CL
OD
Spacing
3/4"
1-1/4"
1-11/16"
5-1/2'
ill
1-3/8"
1-5/16"
6'
N
SIZE RANGE: 1/2" thru 8" pipe sizes
MATERIAL: Pre -galvanized carbon steel with a zinc electroplate
insert nut
APPROVED BY: Factory Mutual
LISTED BY: Underwriters Laboratories Inc. to U. S. and Canadian
safety standards
CONFORMS WITH: Federal Specification WW -H-1 71 (Type 10),
Manufacturers Standardization Society ANSI/MSS-SP-58 (Type 10);
install in accordance with ANSI/MSS-SP-69.
SERVICE: Pipe support manufactured to use minimum rod sizes
permitted by NFPA for fire sprinkler piping.
ORDERING: Specify pipe size, model number and name.
Pipe
H
CL
RS
MRI
A
Max. recom.
load Ibs.
size
1/2"
F_
3-178 '
___� --5/8-
3/8"
1-1/4"
300
3/401
3-1/16"
3/8"
15/16"
300
if$
3-3/16"
1-1/2"
3/8"
15/16"
300
1-1/4"
3-1/2"
1-11/16"
3/8"
7/8"
300
1-1/2"
3-15/16"
1-15/16"
3/8"
ill
300
2"
4-1/2"
2-1/4"
3/8"
1-1/16"
300
2-1/2"
5-15/16"
3-3/8"
3/8"
1-1/2"
525
311
6-1/2"
3-5/8"
3/8"
1-7/8"
525
3-1/2"
7-1/16"
3-15/16"
3/8"
lot
1-7/8"
585
4"
7-1/2"
4-1/8"
3/8"
ill
1-7/8"
650
5"
8-15/16"
4-13/16"
1/2"
1-1/4"
2-3/16"
1000
6"
11-1/16"
6-9/16"
1/2"
1-1/4"
3-3/16"
1000
8"
12-7/8"
7-3/8"
1/2"
1-1/4"
3-1/16"
1000
28 Michigan Hanger - ERICO
4"IfIX4 V4 DOW
�m
Size Range - 3/8 inch rod, pipe sizes 1/2 thru 4 inch.
Material - Carbon Steel
Fuwtion - Practical and economical bracket used to
support piping from wood, concrete or steel beams.
Featwes - Unique design allows rod to be easily threaded
into bracket. Offset design permits unlimited rod
adjustment. Center mounting hole will accept 3/8 and 1/2
inch fastener bolts. Per N.F.P.A. # 13: 1/2 thru 2 inch pipe
requires 3/8 inch fastener, 2-1/2 thru 4 inch pipe requires
1/2 inch fastener.*
Approvals - Underwriters Laboratories Listed, Canadian
Underwriters laboratories Listed and Factory Mutual
Engineering Approved through 4 inch pipe.
Wote-Additionally U.L. has listed the Fig, 58 using (2)
#16 x 2 inch drive screws in wood construction (Fig. 125)
for 1/2 thru 2 inch pipe. Also U.L. listed using'(2) 1/4 x I
inch Tek type screws in minimum 14ga. steel for 1/2 thru 4
inch pipe.
Snish - Plain and Electro -Galvanized
Order By - Figure number and finish.
U. S. PA TENT #S, 702,077 /11�
T4
PW
B
A
E) (D
�0
Per NFPA
I �4�
- Lao Bolt
Up To 4- Phn
2-#l6x2
DrWe Scmm
1/2 Thpu 2 hich
134N
PEPE ROD A B C APPROM
,SIZE SIZE WT./100
I /Z-thru 4 3/8 2-3/4 1-1/2 1-1/8 14
Wood Consbucdon
4P TY ;561 1.19MI mum %UW-1L?ft-t VU014V IN SMVIGB� AeiPA
tqCO Fire & Building
liProducts
Technical Services: Tel: (800) 381-9312 / Fax: (800) 791-5500
The Series RFIl Quick Response
(3 mm bulb) & Standard Response (5
mm bulb), 5.6 K -Factor, "Royal Flush
11" Concealed Pendent Sprinklers are
decorative sprinklers featuring a flat
cover plate designed to conceal the
sprinkler. It is the best choice for archi-
tecturally sensitive areas such as hotel
.lobbies, office buildings, churches,
and restaurants.
Each unit includes a Cover Plate As-
sembly that conceals the sprinkler op-
erating components above the ceiling.
The separable two-piece design of the
Cover Plate ' and Support Cup Assem-
blies allows. installation of the sprin-
klers and pressure testing of the fire
protection system prior to installation
of a suspended ceiling or application
of the finish coating to a fixed ceiling.
They also permit removal of sus-
pended ceiling panels for access to
building service equipment without
having to first shut down the fire pro-
tection system and remove sprinklers.
Also, the separable two-piece design
of the the Sprinkler provides for 1/2
inch (12,7 mm) of vertical adjustment,
to reduce the accuracy to which the
length of fixed pipe drops to the sprin-
klers must be cut.
The Series RFIl Sprinklers are
shipped with a Disposable Protective
Cap. The Protective Cap is temporarily
removed for installation, and then it
can be replaced to help protect the
sprinkler while the ceiling is being in-
stalled or finished. The tip of the Pro
tective Cap can also be used to mar�
the center of the ceiling hole into plas-
ter board, ceiling tiles, etc. by gently
pushing the ceiling product against the
Protective Cap. When the ceiling in-
stallation is complete the Protective
Cap is removed and the Cover Plate
Assembly installed.
As an option, the Series RFII Standard
Response (5 mm bulb) "Royal Flush 11"
Tel: (215) 362-0700 / (800) 523-6512
Fax: (215) 362-5385
MiTu- fINERPLM
t 0
7 =713 Te
Concealed Pendent Sprinklers may be
fitted with a silicone Air and Dust Seal
(Ref. Fig. 5). The Air and Dust Seal is
intended for sensitive areas where it is
desirable to stop air and dust travel
through the cover plate from the area
above the ceiling.
WARNINGS
The Series RF11 Concealed Pendent
Sprinklers described herein must be
i . ristalled and maintained in compli-
ance with this document, as well as
with the applicable standards of the
National Fire Protection Association,
J . n addition to the standards of any
other authorities having jurisdiction.
Failure to do so may impair the integ-
rity of these devices.
The owner is responsible for maintain -
J . ng their fire protection system and de-
vl . ces in proper operating condition.
The installing contractor or sprinkler
manufacturer should be contacted
relative to any questions.
ModeilSpfinkg I or
Identification
N !e"S
Cy 1 (5m bulb) ' TY3531 (3 mm
ximum
b 6b 7ma 1758psi (12,11 bar) by
UL, C -UL, and FM.
NYC under MEA 353-01 -E.
TY3504 (5 mm bulb) 8, TY3505 (3 mm
bulb): maximum 250 psi (17,3 bar) by
UL and C -UL, and maximum 175 psi
(12,1 bar) by FM.
NYC under MEA 353-01 -E.
Approvals for Series RFII
UL and C -UL Listed. FM Approved.
�The approvals apply only to the serv-
ice conditions indicated in the Design
Criteria section and maximum pres-
sure ratings indicated in the
Model/Sprinkler Identification Num-
bers section.)
Approvals for Air & Dust Seal
(Part #10908100)
UL and C -UL Listed for use with the
RFI I (TY3551 & TY3504) Standard Re-
sponse Concealed Sprinkler.
Temperature Ratings
155F/68C'Sprinkler - 135F/57C Plate
20OF/93C Sprinkler - 165F[74C Plate
Discharge Coefficient
K = 5.6 GPM/pSi1/2 (80,6 LPM/barl/2)
Adjustment
1/2 inch (12,7 mm)
Finishes
Cover Plate: Chrome Plated, Brass
Plated, or White Painted (Custom paint
matches and colors other than white
are available on request.)
Physical Characteristics
Frame . . . . . . . . . . . . Bronze
Support Cup . . Chrome Plated Steel
Guide Pins . . . . . . Stainless Steel
Deflector . . . . . . . . . . . Bronze
Compression Screw . . . . . . Brass
Bulb . . . . . . . . . . . . . . Glass
Cap . . . . . . . . Bronze or Copper
Sealing Assembly . . . . . . . . . .
* * * . . . Beryllium Nickel w/Teflon*
Cover Plate . . . . . . . . . . Brass
Retainer . . . . . . . . . . . . Brass
Ejection Spring . . . Stainless Steel
Patents
U.S.A. Patent No. 4,014,388 may be
applicable to the Air and Dust Seal.
Page I of 4 � JANUARY, 2003 TFP1 81
Page 2 of 4
When exposed to heat from a fire, the
Cover Plate, which is normally sol-
dered to the Retainer at three points,
falls away to expose the Sprinkler As-
sembly. At this point the Deflector sup-
ported by the Guide Pins drops down
to its operational position.
The glass Bulb contains a fluid that
expands when exposed to heat. When
the rated temperature is reached, the
fluid expands sufficiently to shatter the
glass Bulb, activating the sprinkler and
allowing water to flow.
Design
Criteria
The RFII (TY3551 & TY3504), 5 mm
Bulb Type, Concealed Pendent Sprin-
klers are LIL and C-LIL Listed as stand-
ard response - standard spray sprin-
klers for use in accordance with the
current NFPA standard. They are FIVI
Approved as standard response -
standard spray sprinklers for use in
accordance with the current FIVI Loss
Prevention Data Sheets.
The RFII (TY3531 & TY3505) 3 mm
Bulb Type, Concealed Pendent Sprin-
klers are LIL and C-LIL Listed as quick
response - standard spray sprinklers
for use in accordance with the current
NFPA standard. They are FIVI Ap-
proved as standard response - stand-
ard spray sprinklers for use in accord-
ance with the current FIVI Loss
Prevention Data Sheets.
The Series RFII Concealed Pendent
Sprinklers are only listed and ap-
proved with the Series FIR I Concealed
Cover Plates having a metallic or white
painted finish.
The Series RFIl must not be used in
applications where the air pressure
above the ceiling is greater than that
below. Down drafts through the Sup-
port Cup could delay sprinkler opera-
tion in a fire situation.
A — BE-,%
Insilanimflon
The Series RFII must be installed in
accordance with the following instruc-
tions:
NOTES
Do not install any bulb type sprinkler if
the bulb is cracked or there is a loss of
liquid from the bulb. With the sprinkler
held horizontally, a small air bubble
should be present. The diameter of the
air bubble is approximately 1116 inch
(1, 6 mm) for the 1550FI68'C and 3132
inch (2,4 mm) for the 200OF193'C tem-
perature ratings.
TFP1 81
1/2"NPT
SEALING
ASSEMBLY
FRAME
CAP
SUPPORT
CUP WITH
BULB
ROLLIFORMED
THREADS
COMPRESSION
SCREW
GUIDE
PINS (2)
DEFLECTOR
(DROPPED
DEFLECTOR
POSITION)
SPRINKLER/SUPPORTCUP
ASSEMBLY
THREADINTO
RE '
RETAINER
SUPPORT CUP
0
WITH
WITH THREAD
UNTIL MOUNTING
0
D,
DIMPLES
SURFACE IS
FLUSH WITH
E
CEILING
LEJECTION
SPRING
S
SOLDER J
COVER
TABS (3)
COVER PLATE/PIETAINER
PLATE
ASSEMBLY
FIGURE 1
SERIES RFII CONCEALED SPRINKLER
ASSEMBLY
A leak tight 112 inch NPTsprinklerjoint
should be obtained with a torque of 7
to 14 ft. lbs. (9,5 to 19,0 Nm). A maxi-
mum of 21 ft.lbs. (28,5 Nm) of torque
is to be used to install sprinklers.
Higher levels of torque may distort the
sprinkler inlet with consequent leak-
age or impairment of the sprinkler.
Do not attempt to compensate for in-
sufficient adjustment in the Sprinkler
Assembly by under- or over -tightening
the SprinklerlSupport Cup Assembly.
Readjust the position of the sprinkler
fitting to suit.
Step 1. The sprinkler must only be
installed in the pendent position and
with the centerline of the sprinkler per-
pendicular to the mounting surface.
Step 2. Remove the Protective Cap.
Step 3. With pipe thread sealant ap-
plied to the pipe threads, hand tighten
the sprinkler into the sprinkler fitting.
Step 4. Wrench tighten the sprinkler
using only the RFII Sprinkler Wrench
(Ref. Figure 3). The RFII Sprinkler
Wrench is to be applied to the Sprin-
kler as shown in Figure 3.
Step 5. Replace the Protective Cap
(Ref. Figure 4) by pushing it upwards
until it bottoms out against the Support
Cup. The Protective Cap helps prevent
damage to the Deflector and Arms dur-
ing ceiling installation and/or during
application of the finish coating of the
ceiling. It may also be used to locate
the center of the clearance hole by
gently pushing the ceiling material up
against the center point of the Protec-
tive Cap.
NOTE
As long as the Protective Cap remains
in place, the system is considered to
be "Out of Service".
Step 6. After the ceiling has been com-
pleted with the 2-1/2 inch (63,5 mm)
diameter clearance hole and in prepa-
ration for installing the Cover Plate As-
sembly, remove and discard the Pro-
tective Cap, and verify that the
Deflector moves up and down freely. If
the Sprinkler has been damaged and
* Registered Trademark of DuPont
TFP1 81
FACE OF
SPRINKLER
FITTING
SPRINKLER
SUPPORT CUP
ASSEMBLY
1/2" (12,7 mm)
THREADED
D ADJUSTMENT
FACE OF CEILING,
RETAINING RING
MOUNTING
SURFACE
3/16" to 11 /16"
(4,8 to 17,5 mm)
REFERENCE
COVER PLATE
PROFILE DEPTH
DIMENSION B
CLEARANCE HOLE
DIAMETER
DIMENSION C
L --------- L_
T_____=
V
MANUFACTURER DEFLECTOR
COVER PLATE
PRESET GAP IN DROPPED
RETAINER
3/32" (2,4 mm) POSITION
ASSEMBLY
COVER PLATE
DIAMETER
DIMENSION A
A: 3-1/4" (82,6 mm) C: 2-3/8" to 2-5/8" (60,3 to 66,7 mm)
B: 3/16"(4,8 mm) D: 1-3/4" to 2-1/4" (44,5 to 57,2 mm)
FIGURE 2
SERIES RFII CONCEALED SPRINKLER
INSTALLATION DIMENSIONS
FRAME
ARM
SUPPORT
CUP
7/8'(23 mm)
SQUARE
ALIGN
ARROWS WITH
FRAMEARMS J
ACCEPTS
1/2'SOCKET
DRIVE
FIGURE 3
RFII SPRINKLER WRENCH
Page 3 of 4
the Deflector does not move up and
down freely, replace the entire Sprin-
kler assembly. Do not attempt to mod-
ify or repair a damaged sprinkler.
Step 7. When installing an Air and
Dust Seal, refer to Figure 5, otherwise
proceed to Step 8. To attach the Air and
Dust Seal, verify the angle of the out-
side edge of the seal is oriented ac-
cording to Figure 5. Start the edge of
the Retainer in the grooved slot of the
Air and Dust Seal and continue around
the retainer until the entire Air and
Dust Seal is engaged.
NOTE
The Air and Dust Seal is only to be
installed on the periphery of the Re-
tainer.
Step 8. Screw on the Cover Plate/Re-
tainer Assembly until the Retainer -
Figure 2 (or Air and Dust Seal - Figure
5) contacts with the ceiling. Do not
continue to screw on the Cover
Plate/Retainer Assembly such that it
lifts a ceiling panel out of its normal
position. If the Cover Plate/Retainer
Assembly cannot be engaged with the
Support Cup or the Cover Plate/Re-
tainer Assembly cannot be engaged
sufficiently to contact the ceiling, the
Sprinkler Fitting must be repositioned.
Care and
Maintenance
The Series RFIl must be maintained
and serviced in accordance with the
following instructions:
NOTES
Absence of the Cover Plate Assembly
may delay sprinkler operation in a fire
situation.
When properly installed, there is a
nominal 3132 inch (2,4 mm) air gap
between the lip of the Cover Plate and
the ceiling, as shown in Figure 2. This
Page 4 of 4
air gap is necessary for proper opera-
tion of the sprinkler. If the ceiling i . s to
be repainted after the installation of
the Sprinkler, care must be exercised
to ensure that the new paint does NOT
seal off any of the air gap.
Factory painted Cover Plates MUST
NOT be repainted. They should be re-
placed, if necessary, by factory
painted units.
Do not pull the Cover Plate relative to
the Enclosure. Separation may result.
Before closing a fire protection system
main control valve for maintenance
work on the fire protection system that
it controls, permission to shutdown the
affected fire protection system must be
obtained from the proper authorities
and all personnel who may be affected
by this action must be notified.
Sprinklers that are found to be leaking
or exhibiting visible signs of corrosion
must be replaced.
Automatic sprinklers must never be
painted, plated, coated or otherwise
altered after leaving the factory. Modi-
fied sprinklers must be replaced.
Sprinklers that have been exposed to
corrosive products of combustion, but
have not operated, should be replaced
if they cannot be completely cleaned
by wiping the sprinkler with a cloth or
by brushing it with a soft bristle brush.
Care must be exercised to avoid dam-
age to the sprinklers - before, during,
and after installation. Sprinklers dam-
aged by dropping, striking, wrench
twist/slippage, or the like, must be re-
placed. Also, replace any sprinkler that
has a cracked bulb or that has lost
liquid from its bulb. (Ref. Installation
Section).
If a sprinkler must be removed, do not
reinstall it or a replacement without
reinstalling the Cover Plate Assembly.
If a Cover Plate Assembly becomes
dislodged during service, replace it im-
mediately.
The owner is responsible for the in-
spection, testing, and maintenance of
their fire protection system and de-
vices in compliance with this docu-
ment, as well as with the applicable
standards of the National Fire Protec-
tion Association (e.g., NFPA 25), in
addition to the standards of any other
authorities having jurisdiction. The in-
stalling contractor or sprinkler manu-
facturer should be contacted relative to
any questions.
It is recommended that automatic
sprinkler systems be inspected,
tested, and maintained by a qualified
Inspection Service.
TFP1 81
SUPPORT SPRINKLER FACE OF
ORIENT
CUP CEILING
SEAL
51-790-1-155
BEVELAS
TY3504
SHOWN
COVER
TY3531
PLATE-
51-792-1-200
RETAINER
51-797- 1 - 1 55
ASSEMBLY
J
P
77 7 U
CLEAN
-
ROOM
LIP OF
COVER SEAL
RETAINER
PLATE
FIGURE 5
56-792-6-135
OPTIONAL AIR AND DUST SEAL FOR SERIES RFII (TY3551 & TY3504)
Products manufactured by Tyco Fire
Products are warranted solely to the
original Buyer for ten (10) years
against defects in material and work-
manship when paid for and properly
installed and maintained under normal
use and service. This warranty will ex-
pire ten (10) years from date of ship-
ment by Tyco Fire Products. No war-
ranty is given for products or
components manufactured by compa-
nies not affiliated by ownership with
Tyco Fire Products or for products and
components which have been subject
to misuse, improper installation, corro-
sion or which have not been installed,
mai�tained, modified or repaired in ac-
cordance with applicable Standards of
the National Fire Protection Associa-
tion, and/or the standards of any other
Authorities Having Jurisdiction. Mate-
rials found by Tyco Fire Products to be
defective shall be either repaired or
replaced, at Tyco Fire Products' sole
option. Tyco Fire Products neither as-
sumes, nor authorizes any person to
assume for it, any other obligation in
connection with the sale of products or
parts of products. Tyco Fire Products
shall not be responsible for sprinkler
system design errors or inaccurate or
incomplete information supplied by
Buyer or Buyer's representatives.
IN NO EVENT SHALL TYCO FIRE
PRODUCTS BE LIABLE, IN CON-
TRACT, TORT, STRICT LIABILITY OR
UNDER ANY OTHER LEGAL THE-
ORY, FOR INCIDENTAL, INDIRECT,
SPECIAL OR CONSEQUENTIAL
DAMAGES, INCLUDING BUT NOT
LIMITED TO LABOR CHARGES, RE-
GARDLESS OF WHETHER TYCO
FIRE PRODUCTS WAS INFORMED
ABOUT THE POSSIBILITY OF SUCH
DAMAGES, AND IN NO EVENT
SHALL TYCO FIRE PRODUCTS'Ll-
014111' IZAFAFIZI #K0121111i, YJIW-, Tivio
15014111', � I 421folff'r-1 YLVA-1 Y W RNA W-1 Y1710000 A
Ordering
MM
When placing an order, indicate the full
product name. Contact your local dis-
tributor for availability.
Sprinkler Assembly:
Specify: (SIN), (specify temperature
rating) Series RFII Concealed Pen-
dent Sprinkler, P/N (specify).
Separately Ordered Cover Plate:
Specify: (specify temperature rating)
Series RFII Concealed Cover Plate
with (specify finish), P/N (specify).
155F/68C
20OF/93C
TY3551
51-790-1-155
51-790-1-200
TY3504
51-796-1-155
51-796-1-200
TY3531
51-792-1-155
51-792-1-200
TY3505
51-797- 1 - 1 55
5 1 -797- 1 -200
Separately Ordered Cover Plate:
Specify: (specify temperature rating)
Series RFII Concealed Cover Plate
with (specify finish), P/N (specify).
For use with 155F/68C sprinklers.
For use with 20OF/93C sprinklers.
Sprinkler Wrench:
Specify: RFII Sprinkler Wrench,
P/N 56-000-1-075.
Air and Dust Seal:
Specify: Air and Dust Seal,
P/N 56-908-1 -00 1.
TYCO FIRE PRODUCTS, 451 North Cannon Avenue, Lansdale, Pennsylvania 19446
135F/57C*
165Ff74C**
Brass
56-792-1-135
56-792-1-165
Bright Brass
56-792-2-135
56-792-2-165
Chrome
56-792-9-135
56-792-9-165
Brushed Chrome
56-792-8-135
56-792-8-165
White
56-792-0-135
56-792-0-165
Bright White
56-792-4-135
56-792-4-165
Off White
56-792-5-135
56-792-5-165
Black
56-792-6-135
56-792-6-165
Custom
56-792-X-135
56-792-X-165
For use with 155F/68C sprinklers.
For use with 20OF/93C sprinklers.
Sprinkler Wrench:
Specify: RFII Sprinkler Wrench,
P/N 56-000-1-075.
Air and Dust Seal:
Specify: Air and Dust Seal,
P/N 56-908-1 -00 1.
TYCO FIRE PRODUCTS, 451 North Cannon Avenue, Lansdale, Pennsylvania 19446
Fire & Building
Products
Technical Services: Tel: (800) 381-9312 / Fax: (800) 791-5500
Assam
EENTRAL
Customer Service/Sales:
Tel: (215) 362-0700 / (800) 523-6512
Fax: (215) 362-5385
Series TY -FRB — 2.1111 5.6
001, and 8.0 K -factor
Upright, Pendent,, and Recessed Pendent Sprinklers
Quick Response, Standard Coverage
General
Description
The Series TY FRB, 2.8, 5.6, and 8.0
K -factor, Upright and Pendent Sprin-
klers described in this data sheet are
quick response - standard coverage,
decorative 3 mm glass bulb type spray
sprinklers designed for use in light or
ordinary hazard, commercial occupan-
cies such as banks, hotels, shopping
malls, etc.
The recessed version of the Series
TY -FRB Pendent Sprinkler, where ap-
plicable, is intended for use in areas
with a finished ceiling. It uses either a
two-piece Style 10 (1/2 inch NPT) or
Style 40 (3/4 inch NPT) Recessed Es-
cutcheon with 1/2 inch (12,7 n1m) of
recessed adjustment or up to 1 , 4 inch
(19,1 mm) of total adjustment from the
flush pendent position, or a two-piece
Style 20 (1/2 inch NPT) or Style 30 (3/4
inch NPT) Recessed Escutcheon with
1/4 inch (6,4 mm) of recessed adjust-
ment or up to 1/2 inch (12,7 mm) of
total adjustment from the flush pen-
dent position. The adjustment provided
by the Recessed Escutcheon reduces
the accuracy to which the fixed pipe
drops to the sprinklers must be cut.
Corrosion resistant coatings, where
applicable, are utilized to extend the
life of copper alloy sprinklers beyond
that which would otherwise be ob-
tained when exposed to corrosive at-
mospheres. Although corrosion resis-
tant coated sprinklers have passed the
standard corrosion tests of the appli-
cable approval agencies, the testing is
not representative of all possible cor-
rosive atmospheres. Consequently, it
is recommended that the end user be
consulted with respect to the suitability
of these coatings for any given corro-
sive environment. The effects of ambi-
ent temperature, concentration of
chemicals, and gas/chemical velocity,
should be considered, as a minimum,
along with the corrosive nature of the
chemical to which the sprinklers will be
exposed.
An intermediate level version of the
Series TY -FRB Pendent Sprinkler can
be obtained by utilizing the Series TY -
FRB Pendent Sprinkler in combination
with the Model S2 Shield.
WARNINGS
The Series TY -FRB Sprinklers de-
scribed herein must be installed and
mai I ntained in compliance with this
document, as well as with the applica-
ble standards of the National Fire Pro-
tection Association, in addition to the
standards of any other authorities hav-
ing jurisdiction. Failure to do so may
impair the integrity of these devices.
The owner is responsible for maintain -
i . �g their fire protection system and de-
vices J . n proper operating condition.
The installing contractor or sprinkler
manufacturer should be contacted
relative to any questions.
TY1 131 -
Upright 2.81K, 1/2::NPT
TY1231 -
Pendent 2.8K, 1/2 NPT
TY3131 -
Upright 5.6K, 1/2"NPT
TY3231-
Pendent 5.6K, 1/2"NPT
TY41 31, -
Upright 8.OK 3/4::NPT
TY4231-
Pendent 8.OK: 3/4 NPT
k- k 7 M. I Z MT, T. I b
D'M#',%
69691111
Approvals
UL and C -UL Listed.
FM, LPCB, and NYC Approved.
(Referto Table A for complete approval
information including corrosion resis-
tant status.)
Maximum Working Pressure
175 psi (12,1 bar)
A
It
Discharge Coefficient
K = 2.8 GPM/psil/2 (40,3 LPM/barl/2)
K = 5.6 GPM/pSil/2 (80,6 LPM/barl/2)
K = 8.0 GPM/pSil/2 (115,2 LPM/barl/2)
Temperature Ratings
Refer to Table A
Finishes
Sprinkler: Refer to Table A
Recessed Escutcheon: White Coated,
Chrome Plated, or Brass Plated
Physical Characteristics
Frame . . . . . . . . . . . . Bronze
Button . . . . . . . .
Brass/Copper
Sealing Assembly
. . I . Beryllium Nickel w/Teflont
Bulb . . . . . . . . .
. . . . . Glass
Compression Screw .
. . . . Bronze
Deflector . . . . . . .
. . . . Copper
Bushing (K=2.8) . . .
. . . . Bronze
Page I of 8 JANUARY, 2003 TFP1 71
_�5
ca
E
a)
_0
a:
0
(L
:3
a
Page 2 of 8
TFP1 71
ESCUTCHEON 7/116"(111,11 mm)
PLATE SEATING 1/2' NOMINAL SSU
SURFACE NPT MAKE -IN DEFLECTOR
6
5
2-3/16'
2 1/4" t7 1 4
(57,2 mm) (55,6 mm)
1 1 2
1-9/16" t1WA RENCH 3
(39,7 mm) FLATS
1
SSP* 7
DEFLECTOR CROSS
PENDENT UPRIGHT SECTION
I - Frame 3 - Sealing 4 - Bulb 6 - Deflector * Temperature rating is indicated on deflector or adjacent to
2 - Button Assembly 5 - Compression 7 - Bushing orifice seat on frame.
Screw **Pipe thread connections per ISO 7/1 can be provided on
special request.
FIGURE 1
QUICK RESPONSE SERIES TY -FRB UPRIGHT (TY1 131) AND PENDENT (TY123 1) SPRINKLERS
2.8 K -FA CTOR, 112 INCH NPT
ESCUTCHEON 7/16" (111, 1 mm)
PLATE SEATING 1/2" NOMINAL
SURFACE NPT MAKE -IN
2-3/16"
(55,6 mm)
(38,11 mm)
STYLE 10 or 20
RECESSED
ESCUTCHEON
SSP DEFLECTOR* 1— 2-7/8" (73,0 mm) DIA.
WRENC
FLATS
SSU*
DEFLECTOR
1/2' NPT**
7/16"
(111,11 mm)
\IOMINAL
MAKE -IN
2-3/16"
(55,6 mm)
— f
6*
PENDENT RECESSED PENDENT UPRIGHT CROSS SECTION
1 - Frame 3 - Sealing 4 - Bulb 6 - Deflector Temperature rating is indicated on deflector or adjacent to
2 - Button Assembly 5 - Compression orifice seat on frame.
Screw ** Pipe thread connections per ISO 7/1 can be provided on
special request.
FIGURE 2
QUICK RESPONSE SERIES TY -FRB UPRIGHT (TY3131) AND PENDENT (TY3231) SPRINKLERS
5.6 K -FA CTOR, 112 INCH NPT
Idjawk
ESCUTCHEON 1/2" (12,7 mm)
PLATE SEATING 3/4" NOMINAL
SURFACE NPT MAKE -IN
2-5/16"
(58, mm)
1-9/16"
(39,7 mm)
SSP DEFLECTOR*
PENDENT
STYLE 30 or 40
RECESSED
ESCUTCHEON
SSU *
DEFLECTOR
2-7/8" (73,0 mm) DIA. 3/4" N PI
RECESSED PENDENT UPRIGHT
2-1/4"
(57,2 mm)
Page 3 of 8
6*
CROSS SECTION
1 - Frame 3 - Sealing 4 - Bulb 6 - Deflector * Temperature rating is indicated on deflector or adjacent to
2 - Button Assembly 5 - Compression 7 - Ejection orifice seat on frame.
Screw Sprin I g **Pipe thread connections per ISO 7/1 can be provided on
special request.
FIGURE 3
OUICK RESPONSE SERIES TY -FRB UPRIGHT (TY4131) AND PENDENT (TY4231) SPRINKLERS
8.0 K -FACTOR, 314 INCH NPT
L'!j'77777 I =�@
The glass Bulb contains a fluid which
expands when exposed to heat. When
the rated temperature is reached, the
fluid expands sufficiently to shatter the
glass Bulb, allowing the sprinkler to
activate and water to flow.
The Series TY -FRB Pendent and Up-
right Sprinklers are intended for fire
protection systems designed in ac-
cordance with the standard installation
rules recognized by the applicable
Listing or Approval agency (e.g., UL
Listing is based on the requirements of
NFPA 13, and FM Approval is based
on the requirements of FM's Loss Pre-
vention Data Sheets ). Only the Style
10, 20, 30, or 40 Recessed Escutch-
eon, as applicable, is to be used for
recessed pendent installations.
Page 4 of 8
TFP1 71
NOTES:
1. Listed by Underwriters Laboratories, Inc. (UL) as Quick Response Sprinklers.
2. Listed by Underwriters Laboratories, Inc. for use in Canada (C -UL) as Quick Response Sprinklers.
3. Approved by Factory Mutual Research Corporation (FM) as Quick Response Sprinklers.
4. Approved by the Loss Prevention Certification Board (LPCB) as Quick Response Sprinklers; however, the LPC does not rate the thermal
sensitivity of recessed sprinklers.
5. Approved by the City of New York under M EA 354-01 -E.
6. VdS Approved (For details contact Tyco Fire & Building Products, Enschede, Netherlands, Tel. 31-53-428-4444/Fax 31-53-428-3377).
7. Where Polyester Coated and Lead Coated Sprinklers are noted to be UL and C -UL Listed, the sprinklers are UL and C -UL Listed as
Corrosion Resistant Sprinklers. Where Lead Coated Sprinklers are noted to be FM Approved, the sprinklers are FM Approved as a
Corrosion Resistant Sprinklers.
Installed with Style 10 (1/2" NPT) or Style 40 (3/4" NPT) 3/4* Total Adjustment Recessed Escutcheon, as applicable.
Installed with Style 20 (1/2" NPT) or Style 30 (3/4" NPT) 1/2" Total Adjustment Recessed Escutcheon, as applicable.
Frame and Deflector only. Listings and approvals apply to all colors (Special Order).
N/A: Not Available
TABLE A
LABORATORY LISTINGS AND APPROVALS
SPRINKLER FINISH (See Note 7)
K
TYPE
TEMP. BULB
LIQUID
NATURAL
BRASS
CHROME
PLATED
WHITE***
POLYESTER
LEAD
COATED
2.8
1/2'
NPT
PENDENT
(TY1 231)
and
UPRIGHT
(TY1 131)
135oF/57oC Orange
1,2,3,5
N/A
1551F/681C Red
175'F/79'C Yellow
200-17/93-C Green
286'F/141'C Blue
5.6
1/2'
PENDENT
(TY3231)
and
UPRIGHT
(TY3131)
1350F/57oC Orange
1,2,3,4,5,6
1,2,3,5
155*F/68'C Red
175117/790C Yellow
200oF/93-C Green
-
1286*F/141'0 Blue
NPT
RECESSED
PENDENT
(TY3231)*
Figure 4
135OF/57oC Orange
1,2,4,5
N/A
155*F/68'C Red
-
175'F/79'C Yellow
200'F/93'C Green
RECESSED
PENDENT
(TY3231)**
Figure 5
1350F/57oC Orange
1,2,3,4,5
1,2,4,5
N/A
155*F/68oC Red
-
175'F/79'C Yellow
200OF/93'C Green
8.0
PENDENT
(TY4231)
and
UPRIGHT
(TY4131)
1350F/57*C Orange
1, 2,3, 4,5,6
1,2,5
155'F/68'C Red
-
1750F/79'C Yellow
200oF/93-C Green
-
286117/1410C Blue
3/4"
NPT
RECESS D
PENDENT
(TY4231)*
Figure 6
135oF/570C Green
1,2,4,5
N/A
1550F/68oC Orange
175'F/79'C Red
200'F/93*C Yellow
RECESSED
PENDENT
(TY4231)'*
Figure 7
1350F/57oC Orange
1,2,3,4,5
N/A
155'F/68*C Red
175'F/79oC Yellow
I
200'F/93'C Green
NOTES:
1. Listed by Underwriters Laboratories, Inc. (UL) as Quick Response Sprinklers.
2. Listed by Underwriters Laboratories, Inc. for use in Canada (C -UL) as Quick Response Sprinklers.
3. Approved by Factory Mutual Research Corporation (FM) as Quick Response Sprinklers.
4. Approved by the Loss Prevention Certification Board (LPCB) as Quick Response Sprinklers; however, the LPC does not rate the thermal
sensitivity of recessed sprinklers.
5. Approved by the City of New York under M EA 354-01 -E.
6. VdS Approved (For details contact Tyco Fire & Building Products, Enschede, Netherlands, Tel. 31-53-428-4444/Fax 31-53-428-3377).
7. Where Polyester Coated and Lead Coated Sprinklers are noted to be UL and C -UL Listed, the sprinklers are UL and C -UL Listed as
Corrosion Resistant Sprinklers. Where Lead Coated Sprinklers are noted to be FM Approved, the sprinklers are FM Approved as a
Corrosion Resistant Sprinklers.
Installed with Style 10 (1/2" NPT) or Style 40 (3/4" NPT) 3/4* Total Adjustment Recessed Escutcheon, as applicable.
Installed with Style 20 (1/2" NPT) or Style 30 (3/4" NPT) 1/2" Total Adjustment Recessed Escutcheon, as applicable.
Frame and Deflector only. Listings and approvals apply to all colors (Special Order).
N/A: Not Available
TABLE A
LABORATORY LISTINGS AND APPROVALS
TFPI 71
MOUNTING
SURFACE
SERIES 1-1/4" (31,8 mrr
CLOSURE TY -FRB 3/4" (19,1 mm)
FIGURE 4
SERIES TY -FRB RECESSED PENDENT
SPRINKLER ASSEMBLY WITH TWO-PIECE
314 INCH TOTAL ADJUSTMENT
STYLE 10 RECESSED ESCUTCHEON
5.6 K -FACTOR, 112 INCH NPT
2-7/8"DIA.
1/2±1/8"
5/8±1/4"
(73,0 mm)
3/4" (19,1 mm
(1 5,9±6,4 mm)
2-1/4"DIA.
1/4" (6,4 mm)
FACE OF
(57,2 mm)
MOUNTING
SPRINKLER
(3,2 1 mm)
PLATE
FITTING
PLATE
FITTING
1/8"
L
(3,2 mm)
(3,2 mm)
MOUNTING
SURFACE
SERIES 1-1/4" (31,8 mrr
CLOSURE TY -FRB 3/4" (19,1 mm)
FIGURE 4
SERIES TY -FRB RECESSED PENDENT
SPRINKLER ASSEMBLY WITH TWO-PIECE
314 INCH TOTAL ADJUSTMENT
STYLE 10 RECESSED ESCUTCHEON
5.6 K -FACTOR, 112 INCH NPT
FIGURE 6
SERIES TY -FRB RECESSED PENDENT
SPRINKLER ASSEMBLY WITH TWO-PIECE
314 INCH TOTAL ADJUSTMENT
STYLE 40 RECESSED ESCUTCHEON
8. 0 K -FA C TOR, 314 INCH NP T
Page 5 of 8
2-7/8" DIA.
1/2±1/8"
5/8:0/4"
(73,0 mm)
3/4"(19,1 mm)
(15,9±6,4mm)
�__2-1/4"DIA.
1/4"(6,4 mm)
PLATE
(57,2 mm)
1/8"
FACE OF
(3,2 1 mm)
MOUNTING
SPRINKLER
PLATE
FITTING
1/8"
(3,2 mm)
ki-
I
MOUNTIN
SURFACE�7
CLOSURE
SERIES
1-5/16"(33,3 mm)
TY -FRB
13/16"(20,6 mm)
FIGURE 6
SERIES TY -FRB RECESSED PENDENT
SPRINKLER ASSEMBLY WITH TWO-PIECE
314 INCH TOTAL ADJUSTMENT
STYLE 40 RECESSED ESCUTCHEON
8. 0 K -FA C TOR, 314 INCH NP T
Page 5 of 8
MOUNTING
SURFACE
CLOSURE SERIES �1-1/4" (31,8 mr
TY-FR6 1 " (25,4 mm)
FIGURE 5
SERIES TY -FRB RECESSED PENDENT
SPRINKLER ASSEMBLY WITH TWO-PIECE
112 INCH TOTAL ADJUSTMENT
STYLE 20 RECESSED ESCUTCHEON
5.6 K -FA CTOR, 112 INCH NPT
2-7/8" DIA.
1/2:0/8" (73,0 mm) 1/2'(12,7mm)
(1 2,7±3,2 mm) 2-1/4"DIA. 1/4"(6,4 mm)
FACE OF (57,2 mm) MOUNTING
SPRINKLER PLATE
FITTING
1/8"
(3,2 mm)
/3A71
MOUNTING
SURFACE
CLOSURE SERIES .1 -5/16" (33,3 mm),
TY-FRI3 1-1/16"(27,0 mm)
FIGURE 7
SERIES TY -FRB RECESSED PENDENT
SPRINKLER ASSEMBLY WITH TWO-PIECE
112 INCH TOTAL ADJUSTMENT
STYLE 30 RECESSED ESCUTCHEON
8.0 K -FACTOR, 314 INCH NPT
2-7/8" DIA.
1/2±1/8"
(73,0 mm) 1/2" (12,7 mm
(1 2,7±3,2 mm)
2-1/4" DIA. 1/4" (6,4 mm)
FACE OF
Ile 1111111 MOUNTING
SPRINKLER
FITTING
PLATE
1/8"
(3,2 1 mm)
MOUNTING
SURFACE
CLOSURE SERIES �1-1/4" (31,8 mr
TY-FR6 1 " (25,4 mm)
FIGURE 5
SERIES TY -FRB RECESSED PENDENT
SPRINKLER ASSEMBLY WITH TWO-PIECE
112 INCH TOTAL ADJUSTMENT
STYLE 20 RECESSED ESCUTCHEON
5.6 K -FA CTOR, 112 INCH NPT
2-7/8" DIA.
1/2:0/8" (73,0 mm) 1/2'(12,7mm)
(1 2,7±3,2 mm) 2-1/4"DIA. 1/4"(6,4 mm)
FACE OF (57,2 mm) MOUNTING
SPRINKLER PLATE
FITTING
1/8"
(3,2 mm)
/3A71
MOUNTING
SURFACE
CLOSURE SERIES .1 -5/16" (33,3 mm),
TY-FRI3 1-1/16"(27,0 mm)
FIGURE 7
SERIES TY -FRB RECESSED PENDENT
SPRINKLER ASSEMBLY WITH TWO-PIECE
112 INCH TOTAL ADJUSTMENT
STYLE 30 RECESSED ESCUTCHEON
8.0 K -FACTOR, 314 INCH NPT
Page 6 of 8
JL — 11,0%
Ihstallmoution
The Series TY -FRB Sprinklers must be
installed in accordance with the follow-
ing instructions:
NOTES
Do not install any bulb type sprinkler if
the bulb is cracked or there is a loss of
liquid from the bulb. With the sprinkler
held horizontally, a small air bubble
should be present. The diameter of the
air bubble is approximately 1116 inch
(1,6 mm) for the 135OF157'C to 3132
inch (2,4 mm) for the 286'FI1410C
temperature ratings.
A leak tight 112 inch NPTsprinklerjoint
should be obtained with a torque of 7
to 14 ft. lbs. (9,5 to 19, 0 Nm). A maxi-
mum of 21 ft. lbs. (28,5 Nm) of torque
may be used to install sprinklers with
112 NPT connections. A leak tight 314
inch NPT sprinkler joint should be ob-
tained with a torque of 10 to 20 ft.lbs.
(13,4 to 26,8 Nm). A maximum of 30
ft. lbs. (40,7 Nm) of torque is to be used
to install sprinklers with 314 NPT con-
nections. Higher levels of torque may
distort the sprinkler inlet and cause
leakage or impairment of the sprinkler.
Do not attempt to make-up for insuffi-
cient adjustment in the escutcheon
plate by under- or over -tightening the
sprinkler. Readjust the position of the
sprinkler fitting to suit
The Series TY-FR13 Pendent and Up-
right Sprinklers must be installed in
accordance with the following instruc-
tions.
Step 1. Pendent sprinklers are to be
installed in the pendent position, and
upright sprinklers are to be installed in
the upright position.
Step 2. With pipe thread sealant ap-
plied to the pipe threads, hand tighten
the sprinkler into the sprinkler fitting.
Step 3. Tighten the sprinkler into the
sprinkler fitting using only the W -Type
6 Sprinkler Wrench (Ref. Figure 8).
With reference to Figures 1, 2, and 3,
the W -Type 6 Sprinkler Wrench is to be
applied to the sprinkler wrench flats.
The Series TY -FRB Recessed Pen-
dent Sprinklers must be installed in
accordance with the following instruc-
tions.
Step A. After installing the Style 10.
20, 30, or 40 Mounting Plate, as appli-
cable, over the sprinkler threads and
with pipe thread sealant applied to the
pipe threads, hand tighten the sprin-
kler into the sprinkler fitting.
Step B. Tighten the sprinkler into the
sprinkler fitting using only the W -Type
7 Recessed Sprinkler Wrench (Ref.
Figure 9). With reference to Figure 2 or
3, the W -Type 7 Recessed Sprinkler
Wrench is to be applied to the sprinkler
wrench flats.
Step C. After the ceiling has been in-
stalled or the finish coat has been ap-
plied, slide on the Style 10, 20, 30, or
40 Closure over the Series TY -FRB
Sprinkler and push the Closure over
the Mounting Plate until its flange
comes in contact with the ceiling.
Care and
1,71.,
The Series TY-FR13 Sprinklers must be
maintained and serviced in accord-
ance with the following instructions:
NOTES
Before closing a fire protection system
mai . n control valve for maintenance
work on the fire protection system that
itcontrols, permission to shutdown the
affected fire protection system must be
obtained from the proper authorities
and all personnel who may be affected
by this action must be notified.
Absence of an escutcheon, which is
used to cover a clearance hole, may
delay the time to sprinkler operation in
a fire situation.
Sprinklers that are found to be leaking
or exhibiting visible signs of corrosion
must be replaced.
Automatic sprinklers must never be
painted, plated, coated or otherwise
altered after leaving the factory. Modi-
fied sprinklers must be replaced.
Sprinklers that have been exposed to
corrosive products of combustion, but
have not operated, should be replaced
if they cannot be completely cleaned
by wiping the sprinkler with a cloth or
by brushing it with a soft bristle brush.
Care must be exercised to avoid dam-
age to the sprinklers - before, during,
and after installation. Sprinklers dam-
aged by dropping, striking, wrench
twist/slippage, or the like, must be re-
placed. Also, replace any sprinkler that
has a cracked bulb or that has lost
liquid from its bulb. (Ref. Installation
Section).
Frequent visual inspections are rec-
ommended to be initially performed for
corrosion resistant coated sprinklers '
after the installation has been com-
pleted, to verify the integrity of the cor-
rosion resistant coating. Thereafter,
annual inspections per NFPA 25
should suffice; however, instead of in-
specting from the floor level, a random
sampling of close-up visual inspec-
tions should be made, so as to better
TFP1 71
WRENCH RECESS
(END 'A' USED FOR
1/2" NPT MODELS)
WRENCH RECESS
(END "13' USED FOR
3/4' NPT MODELS)
FIGURE 8
W -TYPE 6 SPRINKLER
WRENCH
WRENCH
RECESS
PUSH WRENCH
IN TO ENSURE
ENGAGEMENT
WITH SPRINKLER
WRENCHING AREA
FIGURE 9
W -TYPE 7 RECESSED
SPRINKLER WRENCH
determine the exact sprinkler condi-
tion and the long term integrity of the
corrosion resistant coating, as it may
be affected by the corrosive conditions
present.
The owner is responsible for the in-
spection, testing, and maintenance of
their fire protection system and de-
vices in compliance with this docu-
ment, as well as with the applicable
standards of the National Fire Protec-
tion Association (e.g., NFPA 25), in
addition to the standards of any other
authorities having jurisdiction. The in-
stalling contractor or sprinkler manu-
facturer should be contacted relative
to any questions.
It is recommended that automatic
sprinkler systems be inspected,
tested, and maintained by a qualified
Inspection Service.
TFP1 711
Limited
Warranty
Products manufactured by Tyco Fire
Products are warranted solely to the
original Buyer for ten (10) years
against defects in material and work-
!-nanship when paid for and properly
installed and maintained under normal
use and service. This warranty will ex-
pire ten (10) years from date of ship-
ment by Tyco Fire Products. No war-
ranty is given for products or
components manufactured by compa-
nies not affiliated by ownership with
Tyco Fire Products or for products and
components which have been subject
to misuse, improper installation, corro-
sion, or which have not been installed,
maintained, modified or repaired in ac-
cordance with applicable Standards of
the National Fire Protection Associa-
tion, and/or the standards of any other
Authorities Having Jurisdiction. Mate-
rials found by Tyco Fire Products to be
defective shall be either repaired or
replaced, at Tyco Fire Products' sole
option. Tyco Fire Products neither as-
sumes, nor authorizes any person to
assume for it, any other obligation in
connection with the sale of products or
parts of products. Tyco Fire Products
shall not be responsible for sprinkler
system design errors or inaccurate or
incomplete information supplied by
Buyer or Buyer's representatives.
IN NO EVENT SHALL TYCO FIRE
PRODUCTS BE LIABLE, IN CON-
TRACT, TORT, STRICT LIABILITY OR
UNDER ANY OTHER LEGAL THE-
ORY, FOR INCIDENTAL, INDIRECT,
SPECIAL OR CONSEQUENTIAL
DAMAGES, INCLUDING BUT NOT
LIMITED TO LABOR CHARGES, RE-
GARDLESS OF WHETHER TYCO
FIRE PRODUCTS WAS INFORMED
ABOUT THE POSSIBILITY OF SUCH
DAMAGES, AND IN NO EVENT
SHALL TYCO FIRE PRODUCTS' LI-
ABILITY EXCEED AN AMOUNT
EQUAL TO THE SALES PRICE.
THE FOREGOING WARRANTY I
MADE IN LIEU OF ANY AND ALL
OTHER WARRANTIES EXPRESS 0
IMPLIED. INCLUDING WARRAN
OF MERCHANTABILITY AND F1
NESS FOR A PARTICULAR PUR
POSE,
Page 7 of 8
Page 8 of 8
P/N 57 - XXX - X - XXX
TFP1 71
TABLE B
PART NUMBER SELECTION
SERIES TY -FRB PENDENT AND UPRIGHT SPRINKLERS
Ordering
Min,Ti A�7#17�n, --,I
When placing an order, indicate the full
product name. Refer to the Price List
for complete listing of Part Numbers.
Contact your local distributor for avail-
ability.
Sprinkler Assemblies with NPT
Thread Connections:
Specify: (Specify Model/SIN), Quick
Response, (specify K -factor), (specify
temperature rating), Series TY -FRB
(specify Pendent or Upright) Sprinkler
with (specify type of finish or coating),
P/N (specify from Table B).
Recessed Escutcheon:
Specify: Style (specify) Recessed Es-
SPRINKLER I
135
1 NATURALBRASS 155
4 WHITE POLYESTER 175
9 CHROME PLATED 200
7 LEAD COATED
TEMPERATUR
RATING
MODEUSIN
330
2.8K UPRIGHT (1/2'NPT)
TY1 131
135*F/57'C
331
2.8K PENDENT (1/2'NPT)
TY1231
155'F/68'C
370
5.6K UPRIGHT (1/2'NPT)
TY3131
175*F[79'C
371
5.6K PENDENT (1/2'NPT)
TY3231
200*F/93'C
390
B.OK UPRIGHT (3/4'NPT)
TY4131
286'F/141'C
391
8.0K PENDENT (3/4"NPT)
TY4231
Style 20
TABLE B
PART NUMBER SELECTION
SERIES TY -FRB PENDENT AND UPRIGHT SPRINKLERS
Ordering
Min,Ti A�7#17�n, --,I
When placing an order, indicate the full
product name. Refer to the Price List
for complete listing of Part Numbers.
Contact your local distributor for avail-
ability.
Sprinkler Assemblies with NPT
Thread Connections:
Specify: (Specify Model/SIN), Quick
Response, (specify K -factor), (specify
temperature rating), Series TY -FRB
(specify Pendent or Upright) Sprinkler
with (specify type of finish or coating),
P/N (specify from Table B).
Recessed Escutcheon:
Specify: Style (specify) Recessed Es-
cutcheon with
(specify finish), P/N
(specify).
1/2" (15 mm)
Style 10
Phrome Plated .........
P/N 56-701-9-010
1/2 (15 mm)
Style 10
White Color
Coated ...............
P/N 56-701-4-010
1/2' (15 mm)
Style 10
Brass Plated ...........
P/N 56-701-2-010
1/2" (15 m m)
Style 20
Chrome Plated .........
P/N 56-705-9-010
1/2' (15 mm)
Style 20
White Color
Poated ...............
P/N 56-705-4-010
1/2 (15 mm)
Style 20
rass Plated ...........
P/N 56-705-2-010
3/4P (20 mm)
Style 30
Phrome Plated .........
P/N 56-705-9-011
3/4 (20 mm)
Style 30
White Color
oated ...............
P/N 56-705-4-011
3/4p (20 m m)
Style 30
rass Plated ...........
P/N 56-705-2-011
3/4P (20 mm)
Style 40
Phrome Plated .........
P/N 56-700-9-010
3/4 (20 mm)
Style 40
White Color
oated ...............
P/N 56-700-4-010
3/4�(20 mm)
Style 40
Brass Plated ...........
P/N 56-700-2-010
Sprinkler Wrench:
Specify: W -Type 6 Sprinkler Wrench,
P/N 56-000-6-387.
Specify: W -Type 7 Sprinkler Wrench,
P/N 56-850-4-001.
TYCO FIRE PRODUCTS, 451 North Cannon Avenue, Lansdale, Pennsylvania 19446
tqCD Fire & BuIlding
liProducts
Technical Services: Tel: (800) 381-9312 / Fax: (800) 791-5500
Tel: (215) 362-0700 / (800) 523-6512
Fax: (215) 362-5385
General
r
The Series TY -B, 5.6 K -factor, Horizon-
tal and Vertical Sidewall Sprinklers de-
scribed in this data sheet are standard
response - standard coverage, deco-
rative 5 mm glass bulb type spray
sprinklers designed for use in light and
ordinary hazard, commercial occupan-
cies such as banks, hotels, shopping
malls, etc. They are designed for instal-
lation along a wall or the side of a beam
and just beneath a smooth ceiling.
Sidewall sprinklers are commonly
used instead of pendent or upright
sprinklers due to aesthetics or building
construction considerations, where
piping across the ceiling is not desir-
able.
The recessed version of the Series
TY -13 Horizontal Sidewall Sprinkler is
intended for use in areas with a fin-
ished wall. It uses a two-piece Style 10
Recessed Escutcheon. The Recessed
Escutcheon provides 1/2 inch (12,7
mm) of recessed adjustment or Up LU
3/4 inch (19,1 mm) of total adjustment
from the flush sidewall position. The
adjustment provided by the Recessed
Escutcheon reduces the accuracy to
which the fixed pipe nipples to the
sprinklers must be cut.
Corrosion resistant coatings, where
applicable, are utilized to extend the
life of copper alloy sprinklers beyond
that which would otherwise be ob-
tained when exposed to corrosive at-
mospheres. Although corrosion resis-
tant coated sprinklers have passed the
standard corrosion tests of the appli-
cable approval agencies, the testing is
not representative of all possible cor-
rosive atmospheres. Consequently, it
is recommended that the end user be
consulted with respect to the suitability
of these coatings for any given corro-
sive environment. The effects of ambi-
ent temperature, concentration of
chemicals, and gas/chemical velocity,
should be considered, as a minimum,
along with the corrosive nature of the
chemical to which the sprinklers will be
exposed.
WARNINGS
The Series TY -B Sprinklers described
herein must be installed and main-
tained in compliance with this docu-
ment, as well as with the applicable
standards of the National Fire Protec-
tion Association, in addition to the
standards of any other authorities ha v-
ing jurisdiction. Failure to do so may
impair the integrity of these devices.
The owner is responsible for maintain-
ing their fire protection system and de-
vices in proper operating condition.
The installing contractor or sprinkler
manufacturer should be contacted
relative to any questions.
filfmi,771_1101 =1711_1
TY3351 - Horizontal
TY3451 - Vertical
k' 07-77 - MT, L L�, t 71 Z
Data
Approvals
UL and C -UL Listed.
FM, LPCB, and NYC Approved.
(Refer to Table A for complete approval
information including corrosion resis-
tant status)
Maximum Working Pressure
175 psi (12,1 bar)
Discharge Coefficient
K = 5.6 GPM/pSil/2 (80,6 LPM/barl/2)
Temperature Ratings
Refer to Table A
Finishes
Sprinkler: Refer to Table A
Recessed Escutcheon: White Coated,
Chrome Plated, and Brass Plated
Physical Characteristics
Frame . . . . . . . . . . . . Bronze
Button . . . . . . . .
Brass/Copper
Sealing Assembly . .
. . . . . . . .
. . . . . . Beryllium Nickel w/Teflont
Bulb . . . . . . . . .
. . . . . Glass
Compression Screw .
. . . . Bronze
HSW Deflector . . . .
. . . . Bronze
VSW Deflector . . . .
. . . . Copper
Patents
U.S.A. Patent Number 5,810,263 and
UK Patent Number 2,347,624 may be
applicable to the Series TY -B Horizon-
tal Sidewall Sprinkler.
Page I of 6 JANUARY, 2003 TFP1 61
E
Q>
a:
Page 2 of 6
TFP1 61
NOTES:
1. Listed by Underwriters Laboratories, Inc. (UL) for use in Light and Ordinary Hazard Occupancies at a 4 to 12 inch (100 to 300 mm)
top of deflector to ceiling distance.
2. Listed by Underwriters Laboratories, Inc. for use in Canada (C -UL) for use in Light and Ordinary Hazard Occupancies at a 4 to 12
inch (100 to 300 mm) top of deflector to ceiling distance.
3. Approved by Factory Mutual Research Corporation (FM) for use in Light Hazard Occupancies at a 4 to 12 inch (100 to 300 mm)
top of deflector to ceiling distance.
4. Approved by the Loss Prevention Certification Board (LPCB) at a 4 to 6 inch (100 to 150 mm) deflector to ceiling distance.
5. Listed by Underwriters Laboratories, Inc. (UL) for use in Light and Ordinary Hazard Occupancies.
6. Listed by Underwriters Laboratories, Inc. for use in Canada (C -UL:) for use in Light and Ordinary Hazard Occupancies.
7. Approved by Factory Mutual Research Corporation (FM) for use in Light Hazard Occupancies.
8. Approved by the Loss Prevention Certification Board (LPCB).
9. Approved by the City of New York under MEA 354-01-E.
10. Where Polyester Coated, Lead Coated, Wax Coated, and Wax over Lead Coated Sprinklers are noted to be UL and C -UL Listed,
the sprinklers are UL and C -UL Listed as Corrosion Resistant Sprinklers. Where Lead Coated, Wax Coated, and Wax over Lead
Coated Sprinklers are noted to be FM Approved, the sprinklers are FM Approved as Corrosion Resistant Sprinklers.
Installed with Style 10 (1/2" NPT) 3/4" Total Adjustment Recessed Escutcheon.
150117/661C Maximum Ceiling Temperature.
Frame and deflector only. Listings and approvals apply to all colors (Special Order).
'L�l =#,.I [515 1
The glass Bulb contains a fluid which
expands when exposed to heat. When
the rated temperature is reached, the
fluid expands sufficiently to shatter the
glass Bulb, allowing the sprinkler to
activate and water to flow.
TABLE A
LABORATORY LISTINGS AND APPROVALS
V% 0
Design
riteria
The Series TY -B Horizontal and Verti-
cal Sidewall Sprinklers are intended
for fire protection systems designed in
accordance with the standard installa-
tion rules recognized by the applicable
Listing or Approval agency (e.g., UL
Listing is based on the requirements of
NFIPA 13, and FM Approval is based
on the requirements of FM's Loss Pre-
vention Data Sheets). Only the Style
10 Recessed Escutcheon is to be used
for recessed horizontal installations.
SPRINKLER FINISH (See Note 10)
K
TYPE
TEMP. BULB
LIQUID
NATURAL
BRASS
I CHROME
PLATED
I WHITE.**
POLYESTER
LEAD
COATED
WAX
COATED
WAX OVER
LEAD COATED
5.6
1/2"
NPT
HORIZ.
SIDEWALL
(TY3351)
135*F/57'C Orange
1,2,3,4,9
1,2,3,9
1,2,3,9
1,2,3,9
155'F/68'C Red
175*F/79'C Yellow
200*F/93'C Green
286*F/141'C Blue
1 2*', 3**, 9-
1 1 2*', 3", 9
360*F/182'C Mauve
1,2,4,9
N/A
RECESSED
HORIZ.
SIDEWALL
(TY3351)*
Figure 3
135*F/57*C Orange
1
1,2,3,4,9
N/A
155'F/68'C Red
1750F1790C ' Yellow
200*F/93'C Green
5.6
1/2-
NPT
VERTICAL
SIDEWALL
(TY3451)
Installed
Pendent
or
Upright
135*F/57*C Orange
5,6,7,8,9
5,6,7,9
5,6,7,9
5,6,7,9
155'F/68'C Red
175'F/79'C Yellow
200oF/93oC Green
286'F/14loC Blue
5**, 6**, 7**, 9**
5'*, 6**, 7**, 9**
360'F/182'C Mauve
5,6,8,9
N/A
NOTES:
1. Listed by Underwriters Laboratories, Inc. (UL) for use in Light and Ordinary Hazard Occupancies at a 4 to 12 inch (100 to 300 mm)
top of deflector to ceiling distance.
2. Listed by Underwriters Laboratories, Inc. for use in Canada (C -UL) for use in Light and Ordinary Hazard Occupancies at a 4 to 12
inch (100 to 300 mm) top of deflector to ceiling distance.
3. Approved by Factory Mutual Research Corporation (FM) for use in Light Hazard Occupancies at a 4 to 12 inch (100 to 300 mm)
top of deflector to ceiling distance.
4. Approved by the Loss Prevention Certification Board (LPCB) at a 4 to 6 inch (100 to 150 mm) deflector to ceiling distance.
5. Listed by Underwriters Laboratories, Inc. (UL) for use in Light and Ordinary Hazard Occupancies.
6. Listed by Underwriters Laboratories, Inc. for use in Canada (C -UL:) for use in Light and Ordinary Hazard Occupancies.
7. Approved by Factory Mutual Research Corporation (FM) for use in Light Hazard Occupancies.
8. Approved by the Loss Prevention Certification Board (LPCB).
9. Approved by the City of New York under MEA 354-01-E.
10. Where Polyester Coated, Lead Coated, Wax Coated, and Wax over Lead Coated Sprinklers are noted to be UL and C -UL Listed,
the sprinklers are UL and C -UL Listed as Corrosion Resistant Sprinklers. Where Lead Coated, Wax Coated, and Wax over Lead
Coated Sprinklers are noted to be FM Approved, the sprinklers are FM Approved as Corrosion Resistant Sprinklers.
Installed with Style 10 (1/2" NPT) 3/4" Total Adjustment Recessed Escutcheon.
150117/661C Maximum Ceiling Temperature.
Frame and deflector only. Listings and approvals apply to all colors (Special Order).
'L�l =#,.I [515 1
The glass Bulb contains a fluid which
expands when exposed to heat. When
the rated temperature is reached, the
fluid expands sufficiently to shatter the
glass Bulb, allowing the sprinkler to
activate and water to flow.
TABLE A
LABORATORY LISTINGS AND APPROVALS
V% 0
Design
riteria
The Series TY -B Horizontal and Verti-
cal Sidewall Sprinklers are intended
for fire protection systems designed in
accordance with the standard installa-
tion rules recognized by the applicable
Listing or Approval agency (e.g., UL
Listing is based on the requirements of
NFIPA 13, and FM Approval is based
on the requirements of FM's Loss Pre-
vention Data Sheets). Only the Style
10 Recessed Escutcheon is to be used
for recessed horizontal installations.
TFP1 61
The Series TY -B Sprinklers must be
installed in accordance with the follow-
ing instructions:
NOTES
Do not install any bulb type sprinkler if
the bulb is cracked or there is a loss of
liquid from the bulb. With the sprinkler
held horizontally, a small air bubble
should be present. The diameter of the
air bubble is approximately 1116 inch
(1,6 mm) for the 1350F1570C to 3132
inch (2,4 mm) for the 3600F/1821C
temperature ratings.
A leak tight 112 inch NPTsprinklerjoint
should be obtained with a torque of 7
to 14 ft. lbs. (9, 5 to 19, 0 Nm). A maxi-
mum of 21 ft. lbs. (28,5 Nm) of torque
may be used to install sprinklers with
112 NPT connections. Higherlevelsof
torque may distort the sprinkler inlet
and cause leakage or impairment of
the sprinkler.
Do not attempt to make-up for insuffi-
cient adjustment in the escutcheon
plate by under- or over -tightening the
sprinkler. Readjust the position of the
sprinkler fitting to suit.
The Series TY -B Horizontal and Ver-
tical Sidewall Sprinklers must be in-
stalled in accordance with the follow-
ing instructions.
Step 1. Horizontal sidewall sprinklers
are to be installed in the horizontal
position with their centerline of water-
way perpendicular to the back wall and
parallel to the ceiling. The word "TOP"
on the Deflector is to face towards the
ceiling.
Vertical sidewall sprinklers are to be
installed in the pendent or upright po-
sition with the arrow on the Deflector
pointing away from the wall.
Step 2. With pipe thread sealant ap-
plied to the pipe threads, hand tighten
the sprinkler into the sprinkler fitting.
Step 3. Tighten the sprinkler into the
sprinkler fitting using only the W -Type
6 Sprinkler Wrench (Ref. Figure 4),
except that an 8 or 10 inch adjustable
Crescent wrench is to be used for wax
coated sprinklers. With reference to
Figure 1 or 2, the W -Type 6 Sprinkler
Wrench or the Crescent wrench, as
applicable, is to be applied to the
wrench flats.
When installing wax coated sprinklers
with the adjustable Crescent wrench,
additional care needs to be exercised
to prevent damage to the wax coating
on the sprinkler wrench flats or frame
arms and, consequently, exposure of
bare metal to the corrosive environ-
ment. The jaws of the wrench shou
DEFLECT(
HAT
Page 3 of 6
t) 4 ;e J 1
9/16" WRENCH 1/2"
(114,3 mm) FLATS NPT
1- 13/16" 7/16"
(46,0 mm) 111,11 mm)_
CENTERILINE NOMINAL
OF SPRINKLER MAKE -IN
WATERWAY 1-1/2"
(38,11 mm)
2-3/16"
(55,6 mm)
ESCUTCHEON
STYLE 10 PrLAT1 E SEATING
RECESSED r SURFACE
1 - Frame ESCUTCHEON
2 - Button
3 - Sealing
Assembly
4 - Bulb 2-7/8" DIA.
5 - Compression (73, mm)
Screw
6 - Deflector
NJ
Temperature rating is indicated on deflector or adjacent to orifice seat on frame.
**Pipe thread connections per ISO 7/1 can be provided on special request.
FIGURE 1
5.6 K -FACTOR STANDARD RESPONSE
SERIES TY -B HORIZONTAL SIDEWALL (TY3351) SPRINKLERS
be opened sufficiently wide to pass
over the wrench flats without damag-
ing the wax coating. Before wrench
tightening the sprinkler, the jaws of the
wrench are to be adjusted to just con-
tact the sprinkler wrench flats. After
wrench tightening the sprinkler, loosen
the wrench jaws before removing the
wrench.
After installation, the sprinkler wrench
flats and frame arms must be in-
spected and the wax coating re-
touched (repaired) whenever the coat-
ing has been damaged and bare metal
is exposed. The wax coating on the
wrench flats can be retouched by gen-
tly applying abeated 1/8 inch diameter
steel rod to the areas of wax that have
been damaged, to smooth it back over
areas where bare metal is exposed.
NOTES
Only retouching of the wax coating ap-
plied to the wrench flats and frame
arms is permitted, and the retouching
is to be performed only at the time of
the initial sprinkler installation.
The steel rod should be heated only to
the point at which it can begin to melt
the wax, and appropriate precautions
need to be taken, when handling the
Page 4 of 6
heated rod, in order to prevent the
installer from being burned.
If attempts to retouch the wax coating
with complete coverage are unsuc-
cessful, additional wax can be ordered
in the form of a wax stick (the end of
which is color coded). Only the correct
color coded wax is to be used, and
retouching of wrench flats and frame
arms is only permitted at the time of
initial sprinkler installation. With the
steel rod heated as previously de-
scribed, touch the rod to the area re-
quiring additional wax with the rod an-
gled downward, and then touch the
wax stick to the rod approximately
one-half inch away from the area re-
quiring retouching. The wax will melt
and run down onto the sprinkler.
The Series TY -B Recessed Horizon-
tal Sidewall Sprinklers must be in-
stalled in accordance with the follow-
ing instructions.
Step A. Recessed horizontal sidewall
sprinklers are to be installed in the
horizontal position with their centerline
of waterway perpendicular to the back
wall and parallel to the ceiling. The
word "TOP" on the Deflector is to face
towards the ceiling.
Step B. After installing the Style 10
Mounting Plate over the sprinkler
threads, hand tighten the sprinkler into
the sprinkler fitting.
Step C. Tighten the sprinkler into the
sprinkler fitting using only the W -Type
7 Recessed Sprinkler Wrench (Ref.
Figure 5). With reference to Figure 1,
the W -Type 7 Recessed Sprinkler
Wrench is to be applied to the sprinkler
wrench flats.
Step D. After the ceiling has been in-
stalled or the finish coat has been ap-
plied, slide on the Style 10 Closure
over the Series TY -13 Sprinkler and
push the Closure over the Mounting
Plate until its flange comes in contact
with the ceiling.
ESCUTCHEON
PLATE SEATING
SURFACE
2-3/16"
(55,6 mm)
� (38,1 mm)
TFP1 61
SHOWN
PENDENT
I - Frame 3 - Sealing
2 - Button Assembly
2-3/16"
(55,6 mm)
7
SHOWN CROSS
UPRIGHT SECTION
4 - Bulb 6 - Deflector
5 - Compression 7- Ejection Spring
Screw
* Temperature rating is indicated on deflector or adjacent to orifice seat on frame.
**Pipe thread connections per ISO 7/1 can be provided on special request.
FIGURE 2
5.6 K -FACTOR STANDARD RESPONSE
SERIES TY -B VERTICAL SIDEWALL (TY3451) SPRINKLERS
Care and
Maintenance
The Series TY -13 Sprinklers must be
maintained and serviced in accord-
ance with the following instructions.
NOTES
Before closing a fire protection system
main control valve for maintenance
work on the fire protection system that
it controls, permission to shutdown the
affected fire protection system must be
obtained from the proper authorities
and all personnel who maybe affected
by this action must be notified.
Absence of an escutcheon, which is
used to cover a clearance hole, may
delay the time to sprinkler operation in
a fire situation.
Sprinklers that are found to be leaking
or exhibiting visible signs of corrosion
must be replaced.
Automatic sprinklers must never be be
painted, plated, coated or otherwise
altered after leaving the factory Modi-
fied sprinklers must be replaced.
Sprinklers that have been exposed to
1
corrosive products of combustion, but
have not operated, should be replaced
if they cannot be completely cleaned
by wiping the sprinkler with a cloth or
by brushing it with a soft bristle brush.
Care must be exercised to avoid dam-
age to the sprinklers - before, during,
and after installation. Sprinklers dam-
aged by dropping, striking, wrench
twist/slippage, or the like, must be re-
placed. Also, replace any sprinkler that
has a cracked bulb or that has lost
liquid from its bulb. (Ref. Installation
Section).
Frequent visual inspections are rec-
ommended to be initially performed for
corrosion resistant coated sprinklers,
after the installation has been com-
pleted, to verify the integrity of the cor-
rosion resistant coating. Thereafter,
annual inspections per NFPA 25
should suffice; however, instead of in-
specting from the floor level, a random
sampling of close-up visual inspec-
tions should be made, so as to better
determine the exact sprinkler condi-
tion and the long term integrity of the
corrosion resistant coating, as it may
be affected by the corrosive conditions
present.
ARROW MUST
POINTAWAY
7/16"
FROM AND BE
(11,1 mm)
PERPENDICULAR
Im
NOMINAL
TO THE BACK
1/2' MAKE -IN
WALL SURFACE
NPT
I I
SHOWN
PENDENT
I - Frame 3 - Sealing
2 - Button Assembly
2-3/16"
(55,6 mm)
7
SHOWN CROSS
UPRIGHT SECTION
4 - Bulb 6 - Deflector
5 - Compression 7- Ejection Spring
Screw
* Temperature rating is indicated on deflector or adjacent to orifice seat on frame.
**Pipe thread connections per ISO 7/1 can be provided on special request.
FIGURE 2
5.6 K -FACTOR STANDARD RESPONSE
SERIES TY -B VERTICAL SIDEWALL (TY3451) SPRINKLERS
Care and
Maintenance
The Series TY -13 Sprinklers must be
maintained and serviced in accord-
ance with the following instructions.
NOTES
Before closing a fire protection system
main control valve for maintenance
work on the fire protection system that
it controls, permission to shutdown the
affected fire protection system must be
obtained from the proper authorities
and all personnel who maybe affected
by this action must be notified.
Absence of an escutcheon, which is
used to cover a clearance hole, may
delay the time to sprinkler operation in
a fire situation.
Sprinklers that are found to be leaking
or exhibiting visible signs of corrosion
must be replaced.
Automatic sprinklers must never be be
painted, plated, coated or otherwise
altered after leaving the factory Modi-
fied sprinklers must be replaced.
Sprinklers that have been exposed to
1
corrosive products of combustion, but
have not operated, should be replaced
if they cannot be completely cleaned
by wiping the sprinkler with a cloth or
by brushing it with a soft bristle brush.
Care must be exercised to avoid dam-
age to the sprinklers - before, during,
and after installation. Sprinklers dam-
aged by dropping, striking, wrench
twist/slippage, or the like, must be re-
placed. Also, replace any sprinkler that
has a cracked bulb or that has lost
liquid from its bulb. (Ref. Installation
Section).
Frequent visual inspections are rec-
ommended to be initially performed for
corrosion resistant coated sprinklers,
after the installation has been com-
pleted, to verify the integrity of the cor-
rosion resistant coating. Thereafter,
annual inspections per NFPA 25
should suffice; however, instead of in-
specting from the floor level, a random
sampling of close-up visual inspec-
tions should be made, so as to better
determine the exact sprinkler condi-
tion and the long term integrity of the
corrosion resistant coating, as it may
be affected by the corrosive conditions
present.
TFP161
The owner is responsible for the in-
spection, testing, and maintenance of
their fire protection system and de-
vices in compliance with this docu-
ment, as well as with the applicable
standards of the National Fire Protec-
tion Association (e.g., NFPA 25), in
addition to the standards of any other
authorities having jurisdiction. The in-
stalling contractor or sprinkler manu-
facturer should be contacted relative to
any questions.
It is recommended that automatic
sprinkler systems be inspected,
tested, and maintained by a qualified
Inspection Service.
Products manufactured by Tyco Fire
Products are warranted solely to the
original Buyer for ten (10) years
against defects in material and work-
manship when paid for and properly
installed and maintained under normal
use and service. This warranty will ex-
pire ten (10) years from date of ship-
ment by Tyco Fire Products. No war-
ranty is given for products or
components manufactured by compa-
nies not affiliated by ownership with
Tyco Fire Products or for products and
components which have been subject
to misuse, improper installation, corro-
sion, or which have not been installed '
maintained, modified or repaired in ac-
cordance with applicable Standards of
the National Fire Protection Associa-
tion, and/or the standards of any other
Authorities Having Jurisdiction. Mate-
rials found by Tyco Fire Products to be
defective shall be either repaired or
replaced, at Tyco Fire Products' sole
option. Tyco Fire Products neither as-
sumes, nor authorizes any person to
Page 5 of 6
W WRENCH RECESS
(END "A" USED FOR
6ii J/
1/2' NPT MODELS)
FIGURE 4
W -TYPE 6 SPRINKLER WRENCH
WRENCH
RECESS
PUSH WRENCH
IN TO ENSURE
ENGAGEMENT
WITH SPRINKLER
WRENCHING AREA
FIGURE 5
W -TYPE 7 RECESSED
SPRINKLER WRENCH
assume for it, any other obligation in
connection with the sale of products or
parts of products. Tyco Fire Products
shall not be responsible for sprinkler
system design errors or inaccurate or
incomplete information supplied by
Buyer or Buyer's representatives.
IN NO EVENT SHALL TYCO FIRE
PRODUCTS BE LIABLE, IN CON-
TRACT, TORT, STRICT LIABILITY OR
UNDER ANY OTHER LEGAL THE-
ORY, FOR INCIDENTAL, INDIRECT,
SPECIAL OR CONSEQUENTIAL
DAMAGES, INCLUDING BUT NOT
LIMITED TO LABOR CHARGES, RE-
GARDLESS OF WHETHER TYCO
FIRE PRODUCTS WAS INFORMED
ABOUT THE POSSIBILITY OF SUCH
DAMAGES, AND IN NO EVENT
SHALL TYCO FIRE PRODUCTS'Ll-
ABILITY EXCEED AN AMOUNT
EQUAL TO THE SALES PRICE.
THE FOREGOING WARRANTY
MADE IN LIEU OF ANY AND ALL
OTHER WARRANTIES EXPRESS 0
IMPL I= INCL UDING WA RRA N
OF MERCHANTABILITY AND F1
NESS FOR A PARTICULAR PU
POSE,
5/8±1/4"
(15,9±6,4 mm)
MOUNTING
FACE OF
SURFACE
SPRINKLER
FITTING
CLOSURE
2-7/8" DIA.
(73,0 mm)
SERIES
TY -B
2-1/4" DIA.
(57,2 mm)
MOUN I INU
7
PLATE
1/8"
(3,2 mm)
1-1/4" (31,8 mm)
3/4" (19,1 mm)
3/4" (19,1 mm)
1/4" (6,4 mm)
FIGURE 3
SERIES TY -B RECESSED HORIZONTAL SIDEWALL SPRINKLER
WITH TWO-PIECE 314 INCH TOTAL ADJUSTMENT
STYLE 10 RECESSED ESCUTCHEON
The owner is responsible for the in-
spection, testing, and maintenance of
their fire protection system and de-
vices in compliance with this docu-
ment, as well as with the applicable
standards of the National Fire Protec-
tion Association (e.g., NFPA 25), in
addition to the standards of any other
authorities having jurisdiction. The in-
stalling contractor or sprinkler manu-
facturer should be contacted relative to
any questions.
It is recommended that automatic
sprinkler systems be inspected,
tested, and maintained by a qualified
Inspection Service.
Products manufactured by Tyco Fire
Products are warranted solely to the
original Buyer for ten (10) years
against defects in material and work-
manship when paid for and properly
installed and maintained under normal
use and service. This warranty will ex-
pire ten (10) years from date of ship-
ment by Tyco Fire Products. No war-
ranty is given for products or
components manufactured by compa-
nies not affiliated by ownership with
Tyco Fire Products or for products and
components which have been subject
to misuse, improper installation, corro-
sion, or which have not been installed '
maintained, modified or repaired in ac-
cordance with applicable Standards of
the National Fire Protection Associa-
tion, and/or the standards of any other
Authorities Having Jurisdiction. Mate-
rials found by Tyco Fire Products to be
defective shall be either repaired or
replaced, at Tyco Fire Products' sole
option. Tyco Fire Products neither as-
sumes, nor authorizes any person to
Page 5 of 6
W WRENCH RECESS
(END "A" USED FOR
6ii J/
1/2' NPT MODELS)
FIGURE 4
W -TYPE 6 SPRINKLER WRENCH
WRENCH
RECESS
PUSH WRENCH
IN TO ENSURE
ENGAGEMENT
WITH SPRINKLER
WRENCHING AREA
FIGURE 5
W -TYPE 7 RECESSED
SPRINKLER WRENCH
assume for it, any other obligation in
connection with the sale of products or
parts of products. Tyco Fire Products
shall not be responsible for sprinkler
system design errors or inaccurate or
incomplete information supplied by
Buyer or Buyer's representatives.
IN NO EVENT SHALL TYCO FIRE
PRODUCTS BE LIABLE, IN CON-
TRACT, TORT, STRICT LIABILITY OR
UNDER ANY OTHER LEGAL THE-
ORY, FOR INCIDENTAL, INDIRECT,
SPECIAL OR CONSEQUENTIAL
DAMAGES, INCLUDING BUT NOT
LIMITED TO LABOR CHARGES, RE-
GARDLESS OF WHETHER TYCO
FIRE PRODUCTS WAS INFORMED
ABOUT THE POSSIBILITY OF SUCH
DAMAGES, AND IN NO EVENT
SHALL TYCO FIRE PRODUCTS'Ll-
ABILITY EXCEED AN AMOUNT
EQUAL TO THE SALES PRICE.
THE FOREGOING WARRANTY
MADE IN LIEU OF ANY AND ALL
OTHER WARRANTIES EXPRESS 0
IMPL I= INCL UDING WA RRA N
OF MERCHANTABILITY AND F1
NESS FOR A PARTICULAR PU
POSE,
Page 6 of 6
P/N 57 - XXX - X - XXX
I MODEUSIN
578 HORIZONTAL SIDEWALL TY3351
575 VERTICAL SIDEWALL TY3451
SPRINKLER
1
NATURAL BRASS
4
WHITE POLYESTER
9
CHROME PLATED
7
LEAD COATED
6
WAX COATED
200'F/93*C
286'F/141'C MAX.
8
WAX OVER LEAD
286'F/1 41'C MAX.
TFP1 61
360 1 360'F/182*C
TABLE B
PART NUMBER SELECTION
SERIES TY -B HORIZONTAL AND VERTICAL SIDEINALL SPRINKLERS
Ordering
Procedure
When placing an order, indicate the full
product name. Refer to the Price List
for complete listing of Part Numbers.
Contact your local distributor for avail-
ability.
Sprinkler Assemblies with NPT
Thread Connections:
Specify: (Specify Model/SIN), Stand-
ard Response, (specify K -factor),
(specify temperature rating), Series
TY -B (specify Horizontal Sidewall or
Vertical Sidewall) Sprinkler with (spec-
ify type of finish or coating), P/N (spec-
ify from Table B).
Recessed Escutcheon:
Specify: Style (specify) Recessed Es-
cutcheon with (specify finish), P/N
(specify).
1/2" (15 mm)
Style 10
Phrome Plated ......... P/N 56-701-9-010
1/2 (15 mm)
Style 10
White Color
Coated ................ P/N 56-701-4-010
1/2' (15 mm)
Style 10
Brass Plated ........... P/N 56-701-2-010
Sprinkler Wrench:
Specify: W -Type 6 Sprinkler Wrench,
P/N 56-000-6-387.
Specify: W -Type 7 Sprinkler Wrench,
P/N 56-850-4-001.
Wax Sticks:
(for retouching wrench damaged
wax coating)
Specify: (Specify color) color coded
Wax Stick for retouching (specify tem-
perature rating) temperature rated Se-
ries TY -B Sprinklers, P/N (specify).
Black for 135T ........... P/N 56-065-1-135
Red for 155T ............ P/N 56-065-1-155
Yellow for 1175T ......... P/N 56-065-1-175
Blue for 200'F and
286oF ................ P/N 56-065-1-286
NOTES
Each wax stick is suitable for retouch-
ing up to twenty-five sprinklers.
The wax used for 286*F sprinklers is
the same as for 200'F sprinklers, and,
therefore, the 2860Fsprinkler is limited
to the same maximum ceiling tempera-
ture as the 200OF sprinkler (i.e.,
150-F).
TYCO FIRE PRODUCTS, 451 North Cannon Avenue, Lansdale, Pennsylvania 19446
I
TEMPERATURE
RATING
135
135'F/57'C
155
155'F/68'C
175
175*F/79'C
200
200'F/93*C
286
286*F/141'C
360 1 360'F/182*C
TABLE B
PART NUMBER SELECTION
SERIES TY -B HORIZONTAL AND VERTICAL SIDEINALL SPRINKLERS
Ordering
Procedure
When placing an order, indicate the full
product name. Refer to the Price List
for complete listing of Part Numbers.
Contact your local distributor for avail-
ability.
Sprinkler Assemblies with NPT
Thread Connections:
Specify: (Specify Model/SIN), Stand-
ard Response, (specify K -factor),
(specify temperature rating), Series
TY -B (specify Horizontal Sidewall or
Vertical Sidewall) Sprinkler with (spec-
ify type of finish or coating), P/N (spec-
ify from Table B).
Recessed Escutcheon:
Specify: Style (specify) Recessed Es-
cutcheon with (specify finish), P/N
(specify).
1/2" (15 mm)
Style 10
Phrome Plated ......... P/N 56-701-9-010
1/2 (15 mm)
Style 10
White Color
Coated ................ P/N 56-701-4-010
1/2' (15 mm)
Style 10
Brass Plated ........... P/N 56-701-2-010
Sprinkler Wrench:
Specify: W -Type 6 Sprinkler Wrench,
P/N 56-000-6-387.
Specify: W -Type 7 Sprinkler Wrench,
P/N 56-850-4-001.
Wax Sticks:
(for retouching wrench damaged
wax coating)
Specify: (Specify color) color coded
Wax Stick for retouching (specify tem-
perature rating) temperature rated Se-
ries TY -B Sprinklers, P/N (specify).
Black for 135T ........... P/N 56-065-1-135
Red for 155T ............ P/N 56-065-1-155
Yellow for 1175T ......... P/N 56-065-1-175
Blue for 200'F and
286oF ................ P/N 56-065-1-286
NOTES
Each wax stick is suitable for retouch-
ing up to twenty-five sprinklers.
The wax used for 286*F sprinklers is
the same as for 200'F sprinklers, and,
therefore, the 2860Fsprinkler is limited
to the same maximum ceiling tempera-
ture as the 200OF sprinkler (i.e.,
150-F).
TYCO FIRE PRODUCTS, 451 North Cannon Avenue, Lansdale, Pennsylvania 19446
Flow Control Tyco Fire
lProducts
Technical Services: Tel: (800) 381-9312 / Fax: (800) 791-5500
EENTRAL
Customer Service/Sales:
Tel: (215) 362-0700 / (800) 523-6512
Fax: (215) 362-5385
Series DS- I — 5.6 K -factor 6"orl- 11,4AJO PY/ 94ZL IITII�'
Dry Type Sprinklers
Standard Response., Standard Coverage
Generai
Description
The Series DS -11, 5.6 K -factor, Stand-
ard Response, Standard Coverage,
Dry Type Sprinklers are decorative
5 mm glass bulb automatic sprinKlers
designed for the following typical uses:
• where pendent sprinklers are re-
quired on dry pipe systems that
are exposed to freezing tempera-
tures (e.g. sprinkler drops f rom un-
heated portions of buildings)
• where sprinklers and/or a portion
of the connecting piping may be
exposed to freezing temperatures
(e.g. sprinkler drops from wet sys-
tems into freezers, sprinkler
sprigs from wet systems into un-
heated attics, or horizontal piping
extensions through a wall to pro-
tect an unheated area of a build-
ing)
• where sprinklers are used on sys-
tems that are seasonably drained
to avoid freezing (e.g. vacation re-
sort areas)
WARNINGS
The Series DS -1 Dry Type Sprinklers
described herein must be installed and
maintained in compliance with this
document, as well as with the applica-
ble standards of the National Fire Pro-
tection Association, in addition to the
standards of any other authorities ha v-
ing jurisdiction. Failure to do so may
impair the integrity of these devices.
The owner is responsible for maintain-
ing their fire protection system and de-
vices in proper operating condition.
The installing contractor or sprinkler
manufacturer should be contacted
relative to any questions.
The Series DS -1 Dry Type Sprinklers
must only be installed in fittings that
meet the requirements of the Design
Criteria section.
ModellSprinkler
Identification
Numbers
ITY3255 - tPendent
rig4TY31 55 - (Uprig
TY3355 - (Horizontal Sidewall)
Technicai
Data
Approvals
UL and C -UL Listed.
FIVI and NYC Approved.
(Refer to Table A)
Maximum Working Pressure
175 psi (12,11 bar)
Inlet Thread Connection
1 inch NPT (Standard Order)
ISO 7-R1
3/4 inch NPT
1-1/4-14UNC
Discharge Coefficient
K = 5.6 GPM/psil/2
(80,6 LPM/barl/2)
Temperature Ratings
Refer to Table A
Finishes
Sprinkler: Natural Brass, Chrome
Plated, White Polyester
Escutcheon: White Coated or Chrome
Plated
Physical Characteristics
I,nlet . . . . . . . . . . . . . Copper
Plug . . . . . . . . . . . . . Copper
Yoke . . . . . . . . . Stainless Steel
Casing . . . Galvanized Carbon Steel
Insert . . . . . . . . . . . . . Bronze
Bulb Seat . . . . . . Stainless Steel
Bulb . . . . . . . . . . . . . . Glass
Compression Screw . . . . . Bronze
Deflector . . . . . . . . . . . . Bronze
Frame . . . . . . . . . . . . Bronze
Guide Tube . . . . . . Stainless Steel
Water Tube . . . . . . Stainless Steel
Spring . . . . . . . . Stainless Steel
Sealing Assembly . . . . . . . . . .
. . . . . . Beryllium Nickel w/Teflon*
Escutcheon . . . . . . Carbon Steel
Patents
U.S.A. Patent Number 5,188,185 may
be applicable to the Series DS -1, 5.6
K -factor, Standard Response, Stand-
ard Coverage, Dry Type Sprinklers.
* Registered Trademark of DuPont
Page I of 6 FEBRUARY, 2002 TFP500 (5-7.0)
Page 2 of 6
SPRINKLER FINISH
TFP500
TY3255 Pendent TY3255 Pendent TY3355 Hor. Sidewall
w/ Standard W1 Std. Escutcheon w/ Std. Escutcheon
Recessed Escutcheon (Ref. Fig. 5) and a top of
(Ref. Fig. 3) Def lector-to-Cei ling
32 enden distance of
Ty 55 P t 4 to 12 inches
TY325'5 Pendent L/Deep Escutcheon (1100 to 300 mm)
w/ Wide Flange (Ref . Fig. 6)
Recessed Escutcheon
(Ref. Fig. 4) TY3155 Upright (Ref. Fig. 8)
w/o Escutcheon
(Ref. Fig. 7)
Temperature Bulb Natural Chrome White j Natural I Chrome White j Natural I Chrome White
Rating Color Code Brass I Plated I Polyester I Brass I Plated I Polyester I Brass I Plated I Polyester
135'F/57'C
Orange
1,2,3,4
1,2,4
1,2,3,4
1,2,4
1 l-,2-, 3'-,4
1-, 2*, 4
155'F/68'C
Red
1,2,3,4
1,2,4
1,2,3,4
1,2,4
1 2% 3**, 4
1*, 2*, 4
175'F/79'C
Yellow
1,2,3,4
1,2,4
1,2,3,4
1,2,4
1 2*, 3**, 4
1*, 2*, 4
200'F/93'C
Green
1,2,3,4
1,2,4
1,2,3,4
1,2,4
1 2*, 3", 4
1*, 2% 4
286'F/141 -C
Blue
N/A
1,2,3,4
1,2,4
1 2*, 3**, 4
1*,2*,4
360 -F/182 -C
Mauve
N/A
1,2,3,4
1,2,4
1*, 2*, 4
1-, 2% 4
Notes:
1. Listed by Underwriters Laboratories, Inc (Maximum order length of 48 inches).
2. Listed by Underwriters Laboratories for use in Canada (Maximum order length of 48 inches).
3. Approved by Factory Mutual Research Corporation (Maximum order length of 48 inches)
4. Approved by the City of New York under M EA 352-01 -E.
Light and Ordinary Hazard Occupancies Only.
Light Hazard Occupancies Only.
N/A - Not Available.
TABLE A
SERIES DS -1, STANDARD RESPONSE - STANDARD COVERAGE, DRY TYPE SPRINKLERS
LABORATORY LISTINGS AND APPROVALS
PLUG WITH
INLET
GASKETED SPRING
PLATE SEAL
YOKE
SPRING
CASING
WATER
TUBE
INSERT
GUIDE
TUBE
BULB
SEAT
FRAME
5 mm
BULB
VENT HOLE
COMPRESSION
DEFLECTOR
SCREW
FIGURE 1
SERIES DS -1 STANDARD RESPONSE
DRY TYPE SPRINKLER ASSEMBLY
WRENCH
RECESS
PUSH WRENCH IN TO
ENSURE ENGAGEMENT WITH
SPRINKLER WRENCHING AREA
FIGURE 2
W -TYPE 7 SPRINKLER WRENCH
TFPSOO
SPRINKLER FITTING
(REFER TO DESIGN
CRITERIA SECTION) ---------------
FACE OF
SPRINKLER
FITTING
ORDER LENGTHS:
3-1/2"to 48"
(88,9 to 1219,2 mm)
IN 1/4" (6,4 mm) 2-1/4" DIA.
INCREMENTS (57,2 mm)
FACE OF
CEILING
1-3/8"* 1/8"
(34,9 ± 3,2 mm)
FIGURE 3
TY3255 PENDENT
WI STANDARD RECESSED
ESCUTCHEON
SPRINKLER FITTING
(REFER TO DESIGN
CRITERIA SECTION) ------------
FACE OF
SPRINKLER
FITTING
ORDER LENGTHS: 3-1/2" DIA. -
1/2" to 46" (88,9 mm)
(12,7 to 1168,4 mm) 2-1/2" DIA.
IN 1/4" (6,4 mm) (63,
INCREMENTS
4-1/4'± 1/8"
(108,0 ± 3,2 mm)
FIGURE 6
TY3255 PENDENT
WI DEEP ESCUTCHEON
SPRINKLER FITTING
(REFER TO DESIGN
CRITERIA SECTION) ---------------
FACE OF
SPRINKLER
FITTING
_j
ORDER LENGTHS:
3-1/2* to 48"
(88,9 to 1219,2 mm)
IN 1/4'(6,4 mm) 3" DIA,
INCREMENTS (76,2 mm)
FACE OF
CEILING
I v 7r�
1-3/8"±1/8"
(34,9 ± 3,2 mm)
FIGURE 4
TY3255 PENDENT
wl WIDE FLANGE RECESSED
ESCUTCHEON
M Im
E
Page 3 of 6
SPRINKLER FITTING
(REFER TO DESIGN
CRITERIA SECTION) -------- --------
FACE OF
SPRINKLER
FITTING
ORDER LENGTHS:
2-1/2" to 48" 1-3/4* DIA.
(63,5 to 1219,2 mm) (44,5 mm)
IN 1/4"(6,4 mm) -
INCREMENTS F-1
FACE OF
EO
CEILINGV
2-3/16" 1/8" 3" DIA.
(55,6:t- 3,2 mm) (76,2 mm)
FIGURE 5
TY3255 PENDENT
W/ S TA NDA RD
ESCUTCHEON
/ - A 1\
TOP OF
DEFLECTOR
ORDER LENGTHS:
5" to 48"
It 27,0 to 1219,2 mm)
IN 1/4" (6,4 mm)
INCREMENTS
FACE OF
SPRINKLER
FITTING
SPRINKLER FITTING
(REFER TO DESIGN
CRITERIA SECTION)
FIGURE 7
TY3155 UPRIGHT
W/o ESCUTCHEON
ORDER LENGTHS:
2-1/2"to 48"
(63,5 to 1219,2 mm) (101 4"± 1/8"
IN 1/4"(6,4 mm) 6 ± 3,2 mm)
INCREMENTS FACE OF
MOUNTING
FACE OF DIA. SURFACE
SPRINKLER (44, 5 mm),
FITTING
- 3"DIA.
(76,2 mm)
-------------- 3.5*
i SPRINKLER FITTING
(REFER TO DESIGN CENTERLINE 5/161,
CRITERIA SECTION) OF WATERWAY (7,9 mm)
FIGURE 8
TY3355 HORIZONTAL SIDEWALL W/ STANDARD ESCUTCHEON
Page 4 of 6
Operation
When the Series DS -1 is in service,
water is prevented from entering the
assembly by the Plug & Belleville Seal-
ing Assembly (Ref. Figure 1) in the
Inlet of the Sprinkler. The glass Bulb
contains a fluid that expands when ex-
posed to heat. When the rated tem-
perature is reached, the fluid expands
sufficiently to shatter the glass Bulb,
and the Bulb Seat is released. The
compressed Spring is then able to ex-
pand and push the Water Tube as well
as the Guide Tube outward. This action
simultaneously pulls inward on the
Yoke, withdrawing the Plug & Belleville
Seal from the Inlet allowing the sprin-
kler to activate and flow water.
N
Design
Criteria
The Series DS -1 Sprinklers are in-
tended for use in fire sprinkler systems
designed in accordance with the
standard installation rules recognize
by the applicable Listing or Approval
agency (e.g., UL Listing is based on
NFPA 13 requirements).
The Series DS -1 Dry Type Sprinkler is
to be installed in the 1 or 3/4 inch NPT
outlet or run of malleable or ductile iron
threaded tee fittings that meet the di-
mensional requirements of ANSI
B1 6.3 or cast iron threaded tee fittings
that meet the dimensional require-
ments of ANSI B16.4 with the end
sprinkler fitting on a branch line to be
plugged as shown in Figure 1.
When installing 1 inch NPT Series
DS -1 Dry Type Sprinklers on a dry pipe
sprinkler system, only use the side out-
let of maximum 2-1/2 inch size reduc-
ing tee's. When installing 3/4 inch NPT
Series DS -1 Dry Type Sprinklers on a
dry pipe sprinkler system, only use the
side outlet of maximum 2 inch size
reducing tee's.
For wet pipe sprinkler systems, the
Series DS -1 Dry Type Sprinklers may
also be installed in the I or 3/4 inc
NPT outlet of a Central Figure 73
Mechanical Tee.
NOTE
Do not install the Series DS- 1 into any
other type fitting without first consult-
ing the Technical Services Depart-
ment. Contact the Technical Services
Department with regard to the applica-
bility of 1- 114-14 UNC inlet thread con-
nections. Failure to use the appropri-
ate fitting may result in: failure of the
sprinkler to properly operate due to
formation of ice over the inlet Plug or
binding of the inlet Plug; or, insufficient
engagement of the inlet pipe threads
with consequent leakage.
Branch, cross, and feedmain piping
connected to Dry Sprinklers and sub-
ject to freezing temperatures must be
pitched for drainage in accordance
with the minimum requirements of the
National Fire Protection Association
for dry pipe sprinkler systems.
When Dry Sprinklers are to be used in
wet pipe sprinkler systems protecting
areas subject to freezing temperatures
(e.g., sprinkler drops into freezers),
consideration must be given to the ap-
propriate length of the sprinkler that
will prevent freezing of the water in the
connecting pipes due to conduction.
When the temperature surrounding
the wet pipe sprinkler system is main-
tained at a minimum temperature of
40'F/4*C, the following are the mini-
mum recommended lengths between
the face of the sprinkler fitting and the
outside surface of the protected area
(i.e., length exposed to minimum am-
bient of 40'F/40C):
* 12 inches (300 mm) when the tem-
perature within the protected area
is -20OF/-290C
* 18 inches (450 mm) when the tem-
perature within the protected area
is -40OF/-40'C
* 24 inches (600 mm) when the tem-
perature within the protected area
is -60OF/-51 OC
For protected area temperatures be-
tween those given above, the minimum
recommended length from the face of
the fitting to the outside of the pro-
tected area may be determined by in-
terpolating between the indicated val-
ues.
NOTE
When Dty Sprinklers penetrate a ceil-
ing or wallinto an area subject to freez-
ing, the clearance space around the
Sprinkler Casing must be completely
sealed in order to prevent the leakage
of moist air into the freezing area
which might result in the formation of
condensate around the Frame, Deflec-
tor, Bulb Seat, or Bulb. Failure to pre-
vent the formation of condensate could
result in the build-up of ice around the
releasing components. This could re-
sult in inadvertent operation of the
sprinkler or impaired operation due to
reduced thermal sensitivity.
TFP500
Installation
The Series DS -1 Dry Type Sprinklers
must be installed in accordance with
the following instructions:
NOTES
The Series DS- 1 must only be installed
in fittings that meet the requirements
of the Design Criteria section.
Refer to the Design Criteria section for
other important requirements regard-
ing piping design and sealing of the
clearance space around the Sprinkler
Casing.
Do not install any bulb type sprinkler if
the bulb is cracked or there is a loss of
liquid from the bulb. With the sprinkler
held horizontally, a small air bubble
should be present. The diameter of the
air bubble is approximately 1116 inch
(1,6 mm) for the 135'FI57oC rating to
118 inch (3,2 mm) for the 360OF11820C
rating.
A leak tight 1 inch NPT sprinkler joint
should be obtained with a torque of 20
to 30 ft. lbs. (26,8 to 40,2 Nm). Higher
levels of torque may distort the sprin-
kler inlet with consequent leakage or
impairment of the sprinkler.
Do not attempt to compensate for in-
sufficient adjustment in an Escutcheon
Plate by under- or over -tightening the
Sprinkler. Readjust the position of the
sprinkler fitting to suit.
Step 1. Pendent sprinklers must be
installed only in the pendent position,
and upright sprinklers must be in-
stalled only in the upright position. The
deflector of a pendent or upright sprin-
kler is to be parallel to the ceiling.
Horizontal sidewall sprinklers are to be
installed in the horizontal position with
their centerline of waterway perpen-
dicular to the back wall and parallel to
the ceiling. The word "TOP" on the
Deflector is to face towards the ceiling.
Step 2. With pipe thread sealant ap-
plied to the inlet threads, hand tighten
the sprinkler into the sprinkler fitting.
Step 3. Wrench tighten the sprinkler
by wrenching on the Casing with a pipe
wrench whenever the casing is readily
accessible. Otherwise, use a W -Type 7
Sprinkler Wrench (Ref. Figure 2). The
wrench recess of the W -Type 7 is to be
applied to the sprinkler wrench flats
(Ref. Figure 2).
Step 4. After the ceiling/wall has been
instal led/f in ished, slide on the outer
piece of the Escutcheon until it comes
in contact with the ceiling/wall. Do not
lift the ceiling panel out of its normal
position.
In the case of the outer piece of the
TFP500
Deep Ceiling Escutcheon, hold the
outer piece in contact with the mount-
ing surface (ceiling), and then rotate
the inner piece approximately 1/4 turn
with respect to the outer piece, to hold
the Deep Escutcheon firmly together.
Aft -
Crare and
The Series DS -1 Dry Type Sprinklers
must be maintained and serviced in
accordance with the following instruc-
tions:
NOTES
Absence of the outer piece of an es-
cutcheon, which is used to cover a
clearance hole, may delay the tl . me to
sprinkler operation in a fire situati . on.
Before closing a fire protection system
main control valve for maintenance
work on the fire protection system that
itcontrols, permission toshutdown the
affected fire protection systems must
be obtained from the proper authori-
ties and all personnel who may be
affected by this action must be notified.
A Vent Hole is provided in the Bulb
Seat (Ref. Figure 1) to indicate if the
Dry Sprinkler is remaining dry. Evi-
dence of leakage from the Vent Hole is
an indication that there may be
weepage past the Inlet seal and that
the sprinkler needs to be removed for
determining the cause of leakage (e.g.
an improper installation or an ice plug).
The fire protection system control
valve must be closed and the system
drained before removing the sprinkler.
Sprinklers that are found to be leaking
or exhibiting visible signs of corrosion
must be replaced.
Automatic sprinklers must never be
shipped or stored where their tempera-
ture will exceed 100'F/380C and they
must never be painted, plated, coated,
or otherwise altered after leaving the
factory. Modified sprinklers must be re-
placed. Sprinklers that have been ex-
posed to corrosive products of com-
bustion, but have not operated, should
be completely cleaned by wiping the
sprinkler with a cloth or by brushing it
with a soft bristle brush.
Care must be exercised to avoid dam-
age - before, during, and after instal-
lation. Sprinklers damaged by drop-
ping, striking, wrench twist/slippage,
or the like, must be replaced. Also,
replace any sprinkler that has a
cracked bulb or that has lost liquid from
its bulb (Ref. Installation Section).
The owner is responsible for the in-
spection, testing, and maintenance of
their fire protection system and de-
vices in compliance with this docu-
ment, as well as with the applicable
standards of the National Fire Protec-
tion Association (e.g., NFPA 25), in
addition to the standards of any other
authorities having jurisdiction. The in-
stalling contractor or sprinkler manu-
facturer should be contacted relative to
any questions.
It is recommended that automatic
sprinkler systems be inspected,
tested, and maintained by a qualified
Inspection Service.
J
Products manufactured by Tyco Fire
Products are warranted solely to the
original Buyer for ten (10) years
against defects in material and work-
manship when paid for and properly
installed and maintained under normal
use and service. This warranty will ex-
pire ten (10) years from date of ship-
ment by Tyco Fire Products. No war-
ranty is given for products or
components manufactured by compa-
nies not affiliated by ownership with
Tyco Fire Products or for products and
components which have been subject
to misuse, improper installation, corro-
sion, or which have not been installed,
maintained, modified or repaired in ac-
cordance with applicable Standards of
the National Fire Protection Associa-
tion, and/or the standards of any other
Authorities Having Jurisdiction. Mate-
rials found by Tyco Fire Products to be
defective shall be either repaired or
replaced, at Tyco Fire Products' sole
option. Tyco Fire Products neither as-
sumes, nor authorizes any person to
assume for it, any other obligation in
connection with the sale of products or
parts of products. Tyco Fire Products
shall not be responsible for sprinkler
system design errors or inaccurate or
incomplete information supplied by
Buyer or Buyer's representatives.
IN NO EVENT SHALL TYCO FIRE
PRODUCTS BE LIABLE, IN COW
TRACT, TORT, STRICT LIABILITY OR
UNDER ANY OTHER LEGAL THE-
ORY, FOR INCIDENTAL, INDIRECT,
SPECIAL OR CONSEQUENTIAL
DAMAGES, INCLUDING BUT NOT
LIMITED TO LABOR CHARGES, RE-
GARDLESS OF WHETHER TYCO
FIRE PRODUCTS WAS INFORMED
ABOUT THE POSSIBILITY OF SUCH
DAMAGES, AND IN NO EVENT
SHALL TYCO FIRE PRODUCTS' LI-
ABILITY EXCEED AN AMOUNT
EQUAL TO THE SALES PRICE.
THE FOREGOING WARRANTY I
MADE IN LIEU OF ANY AND ALL
Page 5 of 6
Contact your local distributor for avail-
ability, and please specify the follow-
ing:
1. Sprinkler.
e Model/SIN.
*Standard Response, Standard
Coverage, Dry Type Sprinkler
* Deflector Style.
* 5.6 K -factor.
e Order Length
Dry Type Sprinklers are furnished
based upon Order Length as
measured per Figures 3 through
8, as applicable. After the meas-
urement is taken, round it to the
nearest 114 inch increment.
• Inlet Connection (11 Inch NPT is
standard).
• Temperature Rating.
• Sprinkler Finish.
• Escutcheon Style and Finish, as
applicable.
• Part Number from Table B. (Part
numbers are for 1 inch NPT stan-
dar order sprinklers. Orders for all
other sprinkler assemblies must
be accompanied by a complete
description.)
2. W -Type 7 Sprinkler Wrench.
Refer to the Price List for complete
listing of Part Numbers.
Page 6 of 6
P/N 60 - XXX X - XXX
L
SPRINKLER
FMODEL/SIN] FINISH
96
Pendent w/ Standard
TY3255
c�
Escutcheon (I " NPT)
(Fig. 5)
93
Pendent w/ Deep
TY3255
CHROME PLATED
Escutcheon (1 " N PT)
(Fig. 6)
97
Pendent w/ Sid. Recessed
TY3255
37.25"
Escutcheon (11 " N PT)
(Fig. 3)
94 1 Sidewall w/ Standard TY3355
Escutcheon (11' 1 (Fig. 8)
98 1 Upright w/o Escutcheon TY3155
(1 " N PT) I (Fig. 7)
—
Pendent w/ Standard
TY3255
c�
Escutcheon (3/4" NPT)
(Fig. 5)
0
CHROME PLATED
0
CHROME PLATED
Pendent w/ Standard
TY3255
18.75"
Escutcheon (1-1/4-14 UNC)
(Fig. 5)
37.25"
WHITE
480
Pendent w/ Deep
TY3255
a)
Z
Escutcheon (3/4" NPT)
(Fig. 6)
a
E
0
Pendent w/ Deep
TY3255
Escutcheon (1-1/4-14 UNC)
(Fig. 6)
Pendent w/ Sid. Recessed
TY3255
>
2
q:,
Escutcheon (3/4" NPT)
(Fig. 3)
Ir
Lu
Pendent w/ Sid. Recessed
TY3255
0
Escutcheon (1-1/4-14 UNC)
(Fig. 3)
cc
Pendent w/ Wide Fig. Rec.
TY3255
0
_j
<
Escutcheon (1 " NPT)
(Fig. 4)
5
Pendent w/ Wide Fig. Rec.
TY3255
LU
CL
u)
Escutcheon (3/4" NPT)
(Fig. 4)
Pendent w/ Wide Fig. Rec.
TY3255
Escutcheon (1 -1 /4-14 UNC)
(Fig. 4)
Sidewall w/ Standard
TY3355
Escutcheon (3/4" NPT)
(Fig. 8)
Sidewall w/ Standard
TY3355
Escutcheon (11 -1 /4-14 UNC)
(Fig. 8)
Upright w/o Escutcheon
TY3155
L
(3/4" NPT)
(Fig. 7)
TFPSOO
ORDER
LENGTH (1)
(EXAMPLES)
1
NATURALBRASS
4
WHITE POLYESTER
9
CHROME PLATED
0
CHROME PLATED
TFPSOO
ORDER
LENGTH (1)
(EXAMPLES)
NOTES
(1). Dry Type Sprinklers are furnished based upon "Order Length"
as measured per Figures 3 through 8, as applicable, and for each
individual sprinkler where it is to be installed. After the measure-
ment is taken, round it to the nearest 1/4 inch increment.
(2). Escutcheon Finish applies to pendent and sidewall sprinklers
only.
(3). 286F/1 41 C and 360/182C temperature ratings apply to
non -recessed sprinkler assemblies.
TABLE B
PART NUMBER SELECTION
SERIES DS -1, STANDARD RESPONSE, STANDARD COVERAGE, DRY TYPE SPRINKLERS
TYCO FIRE PRODUCTS, 451 North Cannon Avenue, Lansdale, Pennsylvania 19446
055
5.501.
—TSCUTCHEON
FINISH (2)
082
8.25"
WHITE
180
18.001,
WHITE
187
18.75"
CHROME PLATED
k'372
37.25"
WHITE
480
48.00';
NOTES
(1). Dry Type Sprinklers are furnished based upon "Order Length"
as measured per Figures 3 through 8, as applicable, and for each
individual sprinkler where it is to be installed. After the measure-
ment is taken, round it to the nearest 1/4 inch increment.
(2). Escutcheon Finish applies to pendent and sidewall sprinklers
only.
(3). 286F/1 41 C and 360/182C temperature ratings apply to
non -recessed sprinkler assemblies.
TABLE B
PART NUMBER SELECTION
SERIES DS -1, STANDARD RESPONSE, STANDARD COVERAGE, DRY TYPE SPRINKLERS
TYCO FIRE PRODUCTS, 451 North Cannon Avenue, Lansdale, Pennsylvania 19446
TEMPERATURE
RATING (3)
0
113517/57C
1
15517168C
2
1751`179C
3
20017/93C
4
286F/1 41 C
5
360F/182C
NOTES
(1). Dry Type Sprinklers are furnished based upon "Order Length"
as measured per Figures 3 through 8, as applicable, and for each
individual sprinkler where it is to be installed. After the measure-
ment is taken, round it to the nearest 1/4 inch increment.
(2). Escutcheon Finish applies to pendent and sidewall sprinklers
only.
(3). 286F/1 41 C and 360/182C temperature ratings apply to
non -recessed sprinkler assemblies.
TABLE B
PART NUMBER SELECTION
SERIES DS -1, STANDARD RESPONSE, STANDARD COVERAGE, DRY TYPE SPRINKLERS
TYCO FIRE PRODUCTS, 451 North Cannon Avenue, Lansdale, Pennsylvania 19446
Manufactured by: Central Sprinkler Company
451 North Cannon Avenue, Lansdale, Pennsylvania 19446
Product
If Description
U
The Central Two -Piece Adjustable
Sprinkler Escutcheon is designed to
enhance the appearance of pendent
sprinklers when installed below
ceilings. The escutcheon provides a
decorative closure of the annular
space between the sprinkler and the
ceiling.
The Two -Piece Adjustable
Sprinkler Escutcheon is of a
telescoping type design that provides
for 2" of field adjustment, thereby
assuring a good fit against the
ceiling. It is available in two thread
sizes and three standard finishes.
Additional special finishes are
available upon request which require
additional ordering time and a special
paint charge.
Model: 401
Style: Two -Piece Adjustable
Escutcheon
Size: Y2"(12.7mm)orY4" (19. 1 mm) N. P.T.
Standard Finishes: Brass, Chrome and
White
Depth: Minimum: 1Y8" (47.6mm)
Maximum: 3Y8" (79.4mm)
Diameter: Cup: 2Y4" dia. (57.15mm)
Skirt: 3Y2" dia. (88.9mm)
Weight: 2.8 oz. (79.4 grams)
nstallation
The Two -Piece Adjustable Sprinkler
Escutcheon is held in the proper
position by being sandwiched be-
tween the face of the reducing
coupling and the wrench boss on the
sprinkler.
Installation Sequence:
Step 1. The face of the reducing
coupling on the drop nipple should be
a nominal 2Y4" (±Y2") below the -
finished ceiling surface.
Step 2. Prior to installation of the
sprinkler, turn the escutcheon cup
onto the sprinkler threads.
USC 49 fOU1W.) A/
PAIMEV C17UI16 RZ(R.3
99INC Wffe4a- - 910OW
RJOIZIF19 I I.,
Step 3. Hand tighten the sprinkler
and cup into the reducing coupling on
the drop nipple.
Step 4. Wrench tighten the sprinkler
to the recommended torque using the
proper Central Sprinkler Wrench.
Step 5. After the ceiling is in place,
align the escutcheon skirt with the
sprinkler and press it up and over the
escutcheon cup until the outer edge
of the skirt meets the ceiling surface.
Cross Section - Two -Piece Sprinkler Escutcheon - 401
slip_, ---
Fit
@ 1992 Central Sprinkler Company
Printed in U.S.A.
3 1/2" dia.
[/2 1/2" 5/8"
1/2" or 3/4"
2 1/4" dia. Hole
1�rjr�
LtNTRAL
'".00MEMM-
Central Sprinkler Company
451 North Cannon Avenue, Lansdale, PA 19446
Phone (215) 362-0700
FAX (215) 362-5385
�u A144',
W WWI
WI
Ordering Information: When
placing an order, indicate the full
product name. Please specify the
model, size and quantity.
Availability and Service: Central
sprinklers, valves, accessories, and
other products are available
throughout the U.S. and Canada; and
internationally through a network of
Central Sprinkler distribution centers.
You may write directly to Central
Sprinkler Company or call (215) 362-
0700 for the distributor nearest you.
Guarantee: Central Sprinkler
Company will repair and/or replace
any products found to be defective in
material or workmanship within a
period of one year from the date of
shipment. Please refer to the current
Price List for further details of the
warranty.
Conversion Table:
1 inch = 25.400 mm
Conversions are approximate.
401.1
GREAT WHITE@
91PE JOINT COMPOUND
Formulated with Teflon*, Great White@ Pipe Joint Compound is designed for many
piping applications including FlowGuard Gold@ and BlazeMaster@ CPVC Systems.
Lubricating and sealing threaded joints, Great White@ is a non -hardening,
non -separating and non-toxic pipe thread sealant. With its wide pressure and
temperature ranges, Great White91 is the versatile pipe thread sealant solution.
4700 W. 160th St. Cleveland, OH 44135
BELLS
OYT PBA -AC & PBD -D!
P E_R
r -F
Potter Electric Signal Company Potter Electric Signal & Mfg., LTD.
2081 Craig Road - P.O. Box 28480 55 Glen Cameron Road
St. Louis, MO 63146-4161 Thornhill, Ontario, Canada L3T I P2
(314) 878-4321 - (800) 325-3936 (905) 882-1833
Lice; 61.1 V Y. 1(10 V
UL LISTED, FM APPROVED
Sizes Available: 6" (1 50mm), 8" (200mm) and 10" (250mm)
Voltages Available: 24VAC
120VAC
12VDC (10.2 to 15.6) Polarized
24VDC (20.4 to 31.2) Polarized
Service Use: Fire Alarm
General Signaling
Burglar Alarm
Environment: Indoor or outdoor use (See Note 1)
-40' to 150*F (-40* to 66'C)
(Outdoor use requires weatherproof
backbox.)
Termination: 4 No. 18 AWG stranded wires
6" BELL SHOWN Finish: Red powder coating
ODtional: Model BBK-1 weatherproof backbox
These vibrating type bells are designed for use as fire, burglar or general signaling devices. They have low power
consumption and high decibel ratings. The unit mounts on a standard 4" (101 mm) square electrical box for indoor use
or on a model BBK-1 weatherproof backbox for outdoor applications. Weatherproof backbox model BBK-1, Stock No.
1500001.
ALL DC BELLS ARE POLARIZED AND HAVE BUILT-IN TRANSIENT PROTECTION:
SIZE
INCHES (mm)
VOLTAGE
MODEL NO.
STOCK NO.
CURRENT
(MAX.)
TYPICAL dB
AT10FT.(3m)
(2)
MINIMUM dB
ATIOFT.(3m)
(1)
6(150)
12VDC
PBD126
1706012
.1 2A
85
76
8(200)
12VDC
PBD128
1708012
.1 2A
90
76
10(250)
12VDC
PBD1210
1710012
.1 2A
92
76
6(150)
24VDC
PBD246
1706024
.06A
87
76
8(200)
24VDC
PBD248
1708024
.06A
91
79
10(250)
24VDC
PBD2410
1710024
.06A
94
79
6(150)
24VAC
PBA246
1806024
.1 7A
91
76
8(200)
24VAC
PBA248
1808024
.1 7A
94
76
10(250)
24VAC
PBA2410
1810024
.1 7A
94
76
6(150)
120VAC
PBA1206
1806120
.05A
92
82
8(200)
120VAC
PBA1208
1808120
.05A
99
82
10(250) 1
120VAC
810120
.05A
1 99
85
Notes:
1. Minimum dB ratings are calculated from integrated sound pressure measurements made at Underwriters Laborato-
ries as specified in UL Standard 464. UL temperature range is -30' to 150*17 (-34' to 66*C).
2. Typical dB ratings are calculated from measurements made with a conventional sound level meter and are indicative
of output levels in an actual installation.
PRINTED IN USA MKT. #8850001 - REV N PAGE I OF 2
MFG. #5400776 - 11/95
4
4
FIG. I
I I S
DIMENSIONS
INCHES (mm)
BELLS
D W � �. #7 7 r — I
BELLS
PBA -AC & PBD -DC
FIG. 2 WEATHERPROOF BACKBOX
BOX HAS ONE THREADED 1/2" CONDUIT ENTRANCE
(146) 0
- "81
(41'�
DWG, "'1'776-2
(8E)
4 1/4"
( I oa)
FIG. 3 WIRING (REAR VIEW)
D.C. BELLES P L A\ R I T B E I- L S
REC RED (OUT) WHITE (IN) 'NHITE (OUT)
NEXT BELL FR�,I.I -'jI,1TF--,L P,'4iEL
FROM !_011T CL P,'NEL TO
OR EHD—OF—UNE DR
OR RESISTOR PPE�EDIFIG BELL
PFECEDING BELL
EL.', --K (OUT) BLACK (OUT�l
-- � I J Tl,',l I
AHEH ELD__TFOI-�L �UPER\dSIOII IS FE-,UIPED USE III AIHD .-'UT LEADS AS SHONN
N,-� T E S
1, � _�ESEPNE F-._)LAFITY T--� FING Dt-_ BELL�_.
2. "AFES FOSITI.E
PEE) ,
3. EL�','K 'AIRES 1\1 E,__� Al TIVE t—"
I I
T�'
I- ALITP�f 1,
V�HEH ELECTRICAL SUPERVIIIvIJ S REC-UPEC USE IN -�ND LUT LEA.DS AF SHOINN.
� 10TES:
I %VHEN LSIH,-, kC� BELLS. TEPIMHATE EACH EXTRA VIRE SEP ARAJEL
.FTEP T ELL.
B
FEC-IJIFEC, �N
END-1-,F—LNE RESISTOF IS 11-T BELLS
INSTALLATION
1 . The bell should be mounted a minimum of 8 ft. (2.4m) from the floor or as close to the ceiling as possible.
2. Remove the gong.
3. Connect wiring (see Fig. 3).
4. Mount bell mechanism to backbox (bell mechanism must be mounted with the striker pointing down).
5. Reinstall the gong (be sure that the gong positioning pin, in the mechanism housing, is in the hole in the gong).
6. Test all bells for proper operation and observe that they can be heard where required (bells must be heard in all
areas as designated by the authority having jurisdiction).
PRINTED IN USA MKT. #8850001 - REV N PAGE 2 OF 2
MFG. #5400776.- 11195
A
VSR-F
VANE TYPE WATERFLOW
ALARM SWITCH WITH RETARD
Potter Electric Signal Company Potter Electric Signal & Mfg., LTD.
2081 Craig Road - P.O. Box 28480 55 Glen Cameron Road
St.Louis, MID 63146-4161 Thornhill, Ontario, Canada L3T I P2
(314) 878-4321 - (800) 325-3936 (905) 882-1833
U.S. PAT. NO. 3921989
CANADIAN PAT. NO. 1009680
OTHERS PATENTS PENDING
POTTER ELECTRIC, Rd., 1990
GENERAL INFORMATION
The Model VSR-F is a vane type waterflow switch for use on wet
sprinkler systems. It is UL Listed and FM Approved for use on
steel pipe; schedules 10 through 40, sizes 2" thru 8".
LPC approved sizes are 2" thru 8" (50mm thru 200mm).
The unit may also be used as a sectional waterflow detector on
large systems.
The unit contains two single pole, double throw, snap action
switches and an adjustable, instantly recycling pneumatic retard.
The switches are actuated when a flow of 10 gallons per minute
or more occurs downstream of the device. The flow condition
must exist for a period of time necessary to overcome the
selected retard period.
ENCLOSURE: The unit is enclosed in a general purpose, die-
cast housing. The cover is held in place with two tamper
resistant screws which require a special key for removal. A field
installable cover tamper switch is available as an option which
may be used to indicate unauthorized removal of the cover. See
bulletin no. 5400775 for installation instructions of this switch.
UL, U LC and CSFM Listed, FMand LPCApproved, NYMEAAccepted
Service Pressure: Llpto450PSI
Minimum Flow Rate for Alarm: 10 GPM
Maximum Surge: 18 FPS
Contact Ratings: TwosetsofSPDT(FormC)
15.0 Amps at 125/250VAC
2.0 Amps at 30VDC Resistive
Conduit Entrances: Two knockouts provided for 1/2" conduit
Environmental Specifications:
• Suitable for indoor or outdoor use with factory installed gasket
and die-cast housing.
• NEMA 4/IP54 Rated Enclosure - use with appropriate conduit
fitting
• Temperature Range: 40*F/1 20*F, 4.5'C/49*C
• Non -corrosive sleeve factory installed in saddle
Caution: This device is not intended for applications in explosive
environments
SizesAvailable: Pipe schedules 10thru40, sizes 2"thru 8"
BS 1387 pipe 50mm thru 200mm
Service Use:
Automatic Sprinkler NFPA-13
One or two family dwelling NFPA-13D
Residential occupancy up to four stories NFPA-13R
National Fire Alarm Code NFOA-72
Optional: Cover Tamper Switch Kit, Stock No. 0090018
INSTALLATION: See Fig.2
These devices may be mounted on horizontal or vertical pipe. On
horizontal pipe they should be installed on the top side of the pipe
where they will be accessible. The units should not be installed
within 6" of a fitting which changes the direction of the waterflow or
within 24" of a valve or drain.
Drain the system and drill a hole in the pipe using a circular saw in
a slow speed drill. The 2" (50mm) and 2 1/2" (65mm) devices
require a hole with a diameter of 1 1/4" + 1/8" - 1/16" (33mm
±2mm). All other sizes require a hole with a diameter of 2" ±1/8"
(50mm ±2mm).
Clean the inside pipe of all growth or other material for a distance
equal to the pipe diameter on either side of the hole.
Roll the vane so that it may be inserted into the hole; do not bend or
crease it. Insert the vane so that the arrow on the saddle points in
the direction of the waterflow. Install the saddle strap and tighten
nuts alternately to an eventual 50 ft -lbs. of torque (see Fig. 2). The
vane must not rub the inside of the pipe or bind in any way.
Specifications subject to change without notice.
PRINTED IN USA MKT. #8800001 - REV L PAGE I OF 2
MFG. #5400761 - 11/95
FIG. 1
SWITCH TERMINAL CONNECTIONS
CLAMPING PLATE TERMINAL
mvc,
CAUTION:
An uninsulated section of
a single conductor should
not be looped around the
terminal and serve as two
separate connections.
The wire must be severed,
thereby providing supervi-
sion of the connection in
the event that the wire
becomes dislodged from
under the terminal.
FIG. 3
VANE TYPE WATERFLOW
SWITCH WITH RETARD
FIG. 2
[)Cj NOT LE' A * VE .;--,VEF' OFF FOR
E1.1TEI,J[1Fn FFR I GD OF TitIE
RETAR[, 4DJUSTNIENT:
TO C H ' A ' NGE TIME TURH -,NOB (EITHER EIPECTOH) Tk_�HTEI,,] NUTS
FOR DESIRED TIME DEL- f USE . THE MINIMUM ALTERHATELY TO 1,N
AKIOUNT O� PETARE, NEI)E�SARY Tu PREVEHT 'ENTHAL 50FT.-LBS
Y P0 U E
�AL.-%FJvI--. A 'B" 'ETTINC� IS US-10,LL
T-_
-,EF TO
ADEOUATE FOR THIS F"..-ITORY 15 31
TO INSTALL, DRILL A HOLE AS INDICATED:
PIPE SIZE
HOLE SIZE
2"to 2 1/2"
1 1/4" +1/8" -1/16"
(50mmto65mm)
(33mm ±2mm)
3" to 8 "
2"±1/8"
(80mm to 200mm)
, (50mm ±2mm)
L�CAL BELL TFANSFORMER
OF BATTER( POvVERED
OPEN rIN ALARM CLOSE C+1
ALARM
DEVICE
T(PIP--AL SNITCH �__TION
i -PEM i -,N 164":UDSE -N
�LIF ALAR K4
PRECTION OF
WATEPFLOVI
D W G. 7 6 1 - 3 0
TYPICAL ELECTRICAL CONNECTIONS
I 'SS 5 (STYLE B� EI,I[_.F—L1(,JE RESISTOR _KT,
(SEE 1,V:JE)
,-,FEN ON \1,1_��� ECL
ALARM ALARM
SUPERVISED L&�P kEEE HOTE)
FEN 'D --,SE ON TO _'CQ'L
FROM LIP110ES
�,',HTRDL -',P FET1iPIq
PANEL TO CfDI,ITRIJL
MOUHT -,[%I PIPE SO
AFR--'A; ON SADDLE
POIHTS IN DIRECTION
IF '11ATERFLOVV
POLL PACCLE IN
uFP�,SITE DIRECTIO�I
OF �NATERFLOVJ
APPFOX. RETARD SEFT11%]CS (IN `SECS.)
0
� ii_,A
_25�20_40�_15_
E
- C -
57
D7
110-1
d
60-90
I -
Note: For supervised circuits see
"Switch Terminal Connections"
drawing and caution note (Fig. 1).
D',,%/G. #-'-E 1 - 15
NOTES:
1. The Model VSR-F has two switches, one can be used to operate a central station, proprietary or remote signaling unit, while the
other contact is used to operate a local audible or visual annunciator.
2. A condition of LPC Approval of this product is that the electrical entry must be sealed to exclude moisture.
TESTING
The frequency of inspection and testing for the model VSR-F and its associated protective monitoring system should be in
accordance with applicable NFPA Codes and Standards and/or the authority having jurisdiction (manufacturer recommends
quarterly or more frequently).
If provided, the inspector's test valve, that is usually located at the end of the most remote branch line, should always be used for
test purposes. If there are no provisions for testing the operation of the flow detection device on the system, application of the
VSR-F is not recommended or advisable.
A minimum flow of 10 gpm is required to activate this device.
IMPORTANT NOTICE: Please advise the person responsible for testing of the fire protection system that this system must be
tested in accordance with the testing instructions.
PRINTED IN USA MKT. #8800001 - REV L PAGE 2 OF 2
MFG. #5400761 - 11/95
Construction
Chemicals
Product Data
Alge
FVa MOM&
A"CKIN
PO. Box 21148
Tulsa, OK 74121
Hilt! FSomONE
High Performance
Inturnescent Firestop Sealant—
A "state of the art" product which protects more than 95%
of all typical firestop applications, with ratings up to four hours.
Product Description
FS-ONE,High Performance Intumescent
Firestop Sealant is a one -part, ready -to -
use fire rated sealant designed for
firestopping insulated and non -insulated
steel, copper or EMT pipe, jacketed
cables, cable bundles and plastic pipe
penetrations in fire resistive construction.
When cured, it forms a strong, flexible,
noncombustible- barrier which expands
when exposed to heat, impeding the
spread of flames, smoke and toxic gases
through penetrations. Because FS -ONE is
a water-based formulation, it is safe and
easy to apply and cleans -up with water.
FS -ONE has been tested by UL In accor-
dance with UL 1479 and is fire -rated for
up to 4 hours in numerous applications.
Details can be found in the Hilti Firestop
Inspection and Installation Manual and UL
Fire Resistance Directory.
Basic Uses:
FS -ONE is specifically designed for insu-
lated and non -insulated steel, copper or
EMT pipe, jacketed cables, cable bundles,
plastic pipe penetrations in fire resistive
construction. It is also UL classified for
these applications where the opening is
lined with a steel sleeve, typically consid-
ered a worst-case scenario, and top of
wall construction joints.
Limitations:
FS -ONE should not be applied:
• When temperature of the product or
penetration substrate is below 35*F or
above 100'F.
• To building materials that bleed oils,
plasticizers or solvents (e.g. impregnat-
ed wood, oil based caulks, green or
partially vulcanized rubber)
• Underwater
• In any penetrations other than those
specifically described in the firestop
applications drawings and installation
instructions portion of this manual or
the current UL Fire Resistance Directory.
Composition and Materials:
FS -ONE is a one -component, non-com-
bustible, inorganic, moderately intumes-
cent firestop sealant. It has the consisten-
cy of a thick smooth paste. It is virtually
odorless and contains no volatile solvents
or halogen -
Packaging:
FS -ONE is conveniently packaged in stan-
dard 10.1 fl.oz. (300 ml) cartridges and 5
gallon (19 1) pails.
Color.
FS -ONE is red for easy identification.
Applicable Standards:
FS -ONE is classified by Underwriters
Laboratories Inc.0 as a 'Fill, Void or
Cavity Material" for use in Through -
Penetration Firestop Systems. Many
different 1, 2, 3, and 4 hour rated systems
were tested by UL in accordance with
UL 1479, "Fire Tests of Through -
Penetration Firestops" (the UL version
of ASTM E-814). Specific details can be
found in the Hilti Firestop Inspection and
Installation Manual and current UL Fire
Resistance Directory.
FS -ONE has also been independently test-
ed in accordance with ASTM E84 -84a.
Surface Burning Characteristics of
Building Materials, which is similar to
ANSI 2.5, NFPA 255, UBC 42-1, and
UL -723. Complete test report is available
upon request.
FILL, VOID OR CAVITY MATERLALS
CLA,SSIFIED BY
UNDERWRITERS LABORATORIES, INC.
FOR USE IN THROUGWMErRATION PRESTOP SYSTEMS
SEE UL FIRE RESISTANCE DIRECTORY
.1 66Y7
<i
APPROVED
For Penetration Fire Stops.
Consult the Factory Mutual Research
Corporation Approval Guide.
- --- --- ----
Tedoical Dft
IITMNI proW%s of MONE Mo PerIOMM" kh"WSWIt F"$WP SeOW we
lliien belm
APPFOVSW
Storage and Shelf Life:
when stored between 5WF and 100*F in original, unopened
containers, FS OW has a minimum shelf life of I year from the
date of manufacture. Protect from freezing. The expiration
date is stamped on each container.
Technical Services
your local Hiiti representative, together with the Customer
max 100'F Service Department and qualified technical ", can provide
�21 days you with the service YOU need, including product demonstra-
FW _F tions, on-site applicator training and educational seminars, For
assistance, call 1-800-879-8=-
FW1% bPMW MOX = V
S=ke DMIloWtndex -- 5
br- in PnDA�N� Ga for
Installation
1 Before handling. read product and material safety data
sheets for detailed use and health information. Also consult
the firestoP application drawings and installation instruc-
tons portion of this manual or the currem UL Fire
Resistance Directory for specific installation details.
For industrial use only.
2. Application temperature of the substrate must be at
least 40*F.
Remove an loose dirt, dust, oil and any other foreign sub-
stances that would impair adhesidn to the penetrating
items, adjacent surfaces and penetration opening.
4. Install the prescribed backing material, if required
(e.g. CF 124 Foam, backer rod., mineral wool).
5. Apply FS -ONE to the required'depth,..,ffiWng sure the
sealant contacts all surfaces to provide the greatest
adhesion.
6. Using a putty knife or equivalent, tool the sealant immedi-
ately to push it in place and provide a smooth, neat finish.
7. Clean all tools and equipment with water immediately after
work has been completed.
8. Leave completed seal undisturbed for at least 48 hours.
Precautions:
l3efore handling, read the Material Safety Data Sheet. Wear
appropriate gloves and safety goggles. In case of contact with
eyes, flush eyes with water immediately and consult a physi-
cian. In case of contact with skin, remove FS -ONE with a dry
cloth and then wash skin thoroughkY with soap and water
Consult a physician if skin iffitatlon develops. Do not use Sol-
vents to remove sealant from skin. if swallowed, DO NOT
induce vomiting, beek immediate medical attention.
Guaranteefflarr"
sellers Hild, Inc. and Hilt! Construction Chemicals, Inc. warrant
that all products supplied hereunder will be free of defects in
mate" and workmanship. Seller's obligation under this war-
ranty Shall be limited to refund of purchase price or, at Seller's
option, replacement or repair of the defective Products. Sellers
must be notified of all claims of defect within one year of defiv-
ery by Sellers; absence of such written claim during this period
shall constitute a waiver of all claims with regard to such
product.
THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED To THE IMPLIED WARRANTIES OF MER-
CHANTABILITY AND FITNESS FOR A PARTICULAR PUR-
POSE. Sellers shall in no everd be liable for special, incidental,
consequential, or other damages arising out of the sale, use, or
inability to use the product.
N Value
Simplicity Confidence
53
I -800 -819 -MM)
Item No.
00259578
Technical Data
Color
Red
Product, Description
IntUmescent (designed to expand when,
exposed to fire) fir6stop sealant that helps
protect combustible and non-c6mbustible
penetrations for up to 4 hours fire rating
Areas of Application
Steel, copper and EMT pipes.
Insulated steel and copper pipes.
Jacketed cables and cable bundles.
Closed or vented: plastic pipes,.
Standards
ASTM E 814,
British Standard BS 476,
German DIN Standard Z - 19. 15 - 471
Packaging
Pail
Paintable
Yes
Approvals/Listings
UL Classified
UL 1479
Factory Mutual FM Approved
ICBO Evaluation Service Inc. Report No 5071
California State Fire Marshall Listing No.
1200:108
City of New York MEA 326-96-M
City of Los Angeles Research Report 25188
Examples
Sealing around plastic pipe penetrations in fire
rated construction
Method of Application
Trowelling
Inturnescent
Yes
Water Based
Yes
Volume
1155. 000 in'
Volume
5.00 gal
Volume
19.001
Package Quantity
I
One -Line Description
FS -ONE FIRESTOP 5 GALLON PAIL