1295 Red Cleveland Blvd - BC09-000874 (SANFORD AIRPORT AUTHORITY) (TERMINAL A - INTERNATIONAL DEPARTURES - UPPER LEVEL) (A)l"�jrl
"I I , ..
REVISION
PERMIT # DATE_ CLQ
PROJECT ADDRESS CIO-/ ��4 le- .-I a IlrIticl IV -0/1
-F nCONTRACTOR
PHONE #. 'YL13-69cIV-130Z) FAX# 7 - 3,0 - 67a
CONTACT PERSON
en S, qLr- / C�,No
UTILITY DEPT
FIRE PREVENTION
PLANNING
BUILDING
6
0
.Hudson News udson Boo ellers
Palw%yrus p
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
TERMINAL A -INTERNATIONAL DEPARTURES- UPPER LEVEq
P
TERMINAL A- INTERNATIONAL - LEVEL 2
DIRECTORY
y
GENERAL
9
NOTES
1.
ALL WORK IS TO CONFORM TO ALL AFFLICADLE NATIONAL, STATE AND LOCAL
REPRESENTATIVE
12. ALL WOODOWORK SHALL DE MANUFACTURED IN ACCOKPANCE WITH THE CURRENT
GENERAL SPECIFICATIONS
CODES AND AUTHORITIES, WORK SHALL BE APPROVED AND MEET THE LANDLOKD'S
ADDITIONAL WORK 15 REQUIRED AFTER STORE 15 TURNED OVER TO TENANT, THE
EDITION OF THE ARCHITECTURAL WOODWORK QUALITY 5TANPAKD5 OF THE
LANDLORD
REQUIREMENTS,
G.G. SHALL PROVIDE PROTECTION FOR ANY EXFOSED SURFACES, FIXTURING, AND
ARCHITECTURAL WOOPWOKK INSTITUTE IN THE GRADES SHOWN ON DRAWING5.
DEMOLITION BARRICADE AND TEMP FIXTURES
1200 RED CLEVELAND BLVD
MERCHANDISE AND SHALL DE RESFON5I13LE FOR RETURNING STORE TO A "STORE
SURFACES SHALL DE TRUE STRAIGHT AND FREE FROM ALL MACHINE AND TOOL
2.
THE G.C. TO VERIFY ALL DIMENSIONS AT THE JOB 51TE AND REPORT ANY
OPENING" CONDITION.
MARKINGS, BRUISES, INDENTATIONS, CHIPS, AND APKASIONS.
REFLECTED CEILING PLAN
D15CKEPANCIE5 TO THE TENANT'S REPRESENTATIVE. THE G.C. 15 KESFON5IBLE
INTERIOR ELEVATIONS
PROJECT COORDINATOR
>
FOR THE PROPER FIT AND INSTALLATION OF ALL WORK SHOWN ON THESE
a. THE G.C. SHALL V151T THE JOB SITE PRIOR TO DIPPING OR AWARD OF CONTRACT TO
15. THE G.G. SHALL TAKE ALL PRECAUTIONS TO MAINTAIN FREE ACCESS OF ALL
STOREFRONT DETAILS
DRAWINGS. THE ARCHITECT SHALL NOT BE KE5FON51DLE FOR ANY FADKICATION
IN5FECT EXISTING FIELD CONDITIONS, TH15 CONTRACT SHALL INCLUDE ALL LABOR
LANPLOKWTENANT SERVICE PERSONNEL AND THE FUDLIC THPOUG'H THE AREAS
STOREFRONT DETAILS
OR INSTALLATION TECHNIQUES PROVIDED DY THE G.G. OR ANY 5U[3-CONTKACTOKS.
ARCHITECT
INVOLVED AND 5HALL SEE THAT ALL LANDLOKWTENANT FACILITIES, EQUIPMENT;
FIXTURE PLAN AND DETAILS
"
CONDITIONS. THE G.C. SHALL CONTACT THE ARCHITECT, ENGINEER, OR TENANT
AND SERVICES ARE FULLY OFERADLE DUKING 5U51NE55 HOUK5. ANY SHUT DOWN
3.
THE G.C. SHALL SECURE AND PAY FOR ALL PERMITS, FEES, LICEN5E5, TEMPORARY
KEPKESENTATIVE FRIOK TO BIDDING FOR INTEKFKETATION5 AND CLARIFICATIONS
OF ELECTRIC, TELEPHONE, COMMUNICATIONS, FLUMBING, OR HVAC SERVICES
CASHWRAP
UTILITIES, INSPECTIONS, TESTS, AND CARRY LIADILITY INSURANCE AS REQUIRED.
ENGINEER
REQUIRED SHALL BE SCHEDULED WITH THE LANDLORD/TENANT' KEFRE5ENTATIVE5
GONDOLA/ KEYCHAIN MAGNET DISPLAY
INCLUDE SAME IN DID,
CLAKIFICATION5 MADE BY THE ARCHITECT, ENGINEER, OR "TENANT'S
AND ACCEPTED DY SAME PRIOR TO ANY INTEKUFTION OF SERVICE.
4.
UNLE55 OTHERWISE NOTED, THE G.C. SHALT_ PROVIDE AND PAY ALL ALL LADOR,
REPRESENTATIVE AFTER BIDDING WILL BE FINAL AND SHALL DE IMPLEMENTED AT
14. ALL'EXI5TING TO REMAIN' ITEMS'OR MATEKIAL5 SHALL DE FKOTECTED
BOOK WALL UNIT
MATERIALS, EQUIPMENT, TOOLS, CONSTRUCTION EQUIPMENT, MACHINERY,
G.G.'5 COST,
THROUGHOUT THE CONSTRUCTION PERIOD AND SHALL DE THOKOUGHL\( CLEANED
>
TKAN51"OKTATION,. INSPECTIONS OR TEST'S SPECIFIED OR REQUIRED DY THE
PAPYRUS TABI E
JUST PRIOR TO TURNOVER OF 5FACE TO TENANT.
LOCAL/5TATE DUILDING DEPARTMENT, AND OTHER SERVICES AND FACILITIES
9. ALL ELECTRICAL AND TELEPHONE WIRING AND CONDUIT SHALL BE CONCEALED IN
22. IF REQUIRED DY THE LANDLORD OR LOCAL AUTHORITIE5, THE G.C. SHALL PROVIDE
NECE55AKY FOR FKOFEK AND TIMELY EXECUTION OF WORK,
WALLS, CEILINGS, OR MILLWORK.
15. THE G.0 AND ALL. 5UDCONTRACTOK5 MUST DISPLAY PROPER ISSUED SECURITY
.
IDENTIFICATION AT ALL TIMES AS REQUIRED DY THE LANDLORD.
5,
ALL FIXTUKE5, EQUIPMENT, COMPONENTS AND MATEKIAL5 DELIVERED TO THE 51TE
AUTHORITIES, DE MADE PART OF THE CONSTRUCTION DOCUMENTS.
i
AND RECEIVED DY THE CONTRACTOR AND/OK H15 AGENTS, BECOME THE
16. TI IE G.C. SHALL DE ROUND TO THE DUILDING PULES A5 TO THE HOURS OF WORK,
KE5FON5113ILITY OF THE G.C. NO DELIVERIES WILL DE ACCEPTED BY THE
USE OF THE ELEVATORS AND STAIRS, STORAGE AND REMOVAL OF DEDF:15, ET -C,
LANDLORD,
ALL WOKr 5HALL. DE PERFORMED A5 EXFEDITIOUSL`(A5 P0550LE. THE
TAX. TR VEL DF "(ANCE ROVID ,Di 44'- "
CONTRACT PRICE MIDST INCLUDE ANY AND ALL CONSIDERATION OF THE
6.
NO 505TITUTIONS ARE ALLOWED WITHOUT PRIOR WRITTEN AFFKOVAL OF THE
DUILDINGRULES. NO EXTRA CHARGES WILL DE ADDED AFTER CONTRACT 51GNING.
TENANT.
17, ALL 1305 ARE TO BE SUDMITTED TO THE TENAT REPRESENTATIVE PER 1-115
V.
THE G.C. SHALL KEEP THE JOB SITE CLEAN AT ALL "TIMES AND SHALL FKEVENT
INSTRUCTIONS, 1305 SHALL BE BROKEN DOWN PEK THE TENANT
DUST/DIRT FROM GETTING INTO THE AIRPORT COMMON AREA. UPON COMPLETION
KEFRE5ENTATIVE'S DID FORM.
OF WORK, THE G.C. SHALL THOROUGHLY CLEAN ENTIRE STORE. CLEAN ALL GLASS,
WALL5, FIXTURING, FLOORS, AND CEILING. REMOVE ALL SCRATCHES & MARKS LEFT
15, CONSULTANTS' DRAWINGS AKE SUPPLEMENTAL TO THE ARCHITECTURAL
DIRECTORY
TENANT
Hudson Group
TENANT
RAY BOWEN
REPRESENTATIVE
1 MEADOWLANDS PLAZA SUITE902
GENERAL SPECIFICATIONS
EAST RUTHERFORD, NJ 07073
ADDITIONAL WORK 15 REQUIRED AFTER STORE 15 TURNED OVER TO TENANT, THE
TEL (404)822-7348
LANDLORD
SANFURD ORLANDO INTERNATIONAL AIRPORT
G.G. SHALL PROVIDE PROTECTION FOR ANY EXFOSED SURFACES, FIXTURING, AND
SANFOF�D AIRPORT AUTHORITY
DEMOLITION BARRICADE AND TEMP FIXTURES
1200 RED CLEVELAND BLVD
MERCHANDISE AND SHALL DE RESFON5I13LE FOR RETURNING STORE TO A "STORE
SANFORD,FL 32773
>1
LARRY A. DALE
OPENING" CONDITION.
PRESIDENT & C.E.O.
REFLECTED CEILING PLAN
CONTACT: JENNIFER TAYLOR
INTERIOR ELEVATIONS
PROJECT COORDINATOR
>
407-585-4000
a. THE G.C. SHALL V151T THE JOB SITE PRIOR TO DIPPING OR AWARD OF CONTRACT TO
TSI AIRPORT MANAGEMENT, INC.
STOREFRONT DETAILS
CONTACT: DAVE LOGAN
IN5FECT EXISTING FIELD CONDITIONS, TH15 CONTRACT SHALL INCLUDE ALL LABOR
DIRECTOR OF OPERATIONS
STOREFRONT DETAILS
407-585-4536
ARCHITECT
METALUNA ARCHITECTURE
FIXTURE PLAN AND DETAILS
& DESIGN, P.C.
CONDITIONS. THE G.C. SHALL CONTACT THE ARCHITECT, ENGINEER, OR TENANT
1665 HIGHWAY 588
COOLER ENCLOSURE
ELLISVILLE, MS 39437
KEPKESENTATIVE FRIOK TO BIDDING FOR INTEKFKETATION5 AND CLARIFICATIONS
CON TACT: SCOTT POWELL
CASHWRAP
CELL (001)433-3830
ENGINEER
DON PENN, CONSULTING ENG.
GONDOLA/ KEYCHAIN MAGNET DISPLAY
635 WESTPORT PARKWAY # 300
CLAKIFICATION5 MADE BY THE ARCHITECT, ENGINEER, OR "TENANT'S
GRAPEVINE, TX 76051
>
CONTACT: JACK PAMPALON
REPRESENTATIVE AFTER BIDDING WILL BE FINAL AND SHALL DE IMPLEMENTED AT
CELL PHONE: (404) 210-4699
FROM CONSTKU(,TION, FLOURS SHALL DE IvIOPFED. 5TEP5 SHALL DE TAKEN TO
REMOVE FROM ALL EXPOSED SUKFACE5 AND FIXTURING: DUST, DEDRIS, PAINT
DKAWINGJ. II I� THE RE�PONSIDILI" UF I1•iE G.G. 1U CKUSS H[ -GK. 7V1I1I TrE
ARCHITECTURAL DRAWINGS PRIOR TO THE ORDEKING/INSTALLATION OF ANY
T-1.1
SPECIFICATIONS
APPLICABLE CODES
DRIPPINGS, OIL, GREASE, ADHESIVES, AND OTHER DLEM15HE5. IN THE EVENT THAT
MECHANICAL, P_LUMDING, AND ELECTRICAL WORK. ANY P15CREFANCIE5 DETWEEN
GENERAL SPECIFICATIONS
BUILDING FLORIDA BUILDING CODE, 2004 EDITION WITH ALL SUPPLEMENTS
ADDITIONAL WORK 15 REQUIRED AFTER STORE 15 TURNED OVER TO TENANT, THE
THE ARCHITECTURAL AND THE CONSULTING ENGINEEK'5 DRAWINGS 1,5HALL DE
GENERAL SPECIFICATIONS
FIRE FLORIDA FIRE PREVENTION CODE, 2004 EDITION
G.G. SHALL PROVIDE PROTECTION FOR ANY EXFOSED SURFACES, FIXTURING, AND
DROUGHT TO THE ARCHITEC T'5 ATTENTION FOK IMMEDIATE CLARIFICATION.
DEMOLITION BARRICADE AND TEMP FIXTURES
ELECTRICAL NATIONAL ELECTRICAL CODE, 2002 EDITION WITH ALL SUPPLEMENTS
MERCHANDISE AND SHALL DE RESFON5I13LE FOR RETURNING STORE TO A "STORE
A-1.0
>1
MECHANICAL FLORIDA BUILDING CODE, 2004 EDITION MECHANICAL
OPENING" CONDITION.
19, ALL EXIT5'SHALL DE KEPT READILY ACCE55IDLE AND UNO55TKUCTED AT ALL
REFLECTED CEILING PLAN
WITH ALL SUPPLEMENTS, CHAPTER 13, ENERGY EFFICIENCY
INTERIOR ELEVATIONS
TIMES.
>
PLUMBING FLORIDA BUILDING CODE, 2004 EDITION, PLUMBING W/SUPPLEMENTS
a. THE G.C. SHALL V151T THE JOB SITE PRIOR TO DIPPING OR AWARD OF CONTRACT TO
A-3.0
STOREFRONT DETAILS
ACCESSIBILITY FLORIDA BUILDING CODE, 2004 EDITION, CHAPTER ll, ACCESSIBILITY CODE
IN5FECT EXISTING FIELD CONDITIONS, TH15 CONTRACT SHALL INCLUDE ALL LABOR
20. DAMAGED,5UKFACE5 AND ANY OTHER DEFECTS CAUSING AN" APPEARANCE
STOREFRONT DETAILS
BASF BUILDING
AND MATERIALS NECESSARY FOR FIELD MODIFICATIONS DUE TO EXISTING
DIFFERENT FROM A NEW, FIK5"F CLASS, FINISHED INSTALLATION SHALL EITHER DE
FIXTURE PLAN AND DETAILS
USE GROUP CLASSIFICATION Al -ASSEMBLY
CONDITIONS. THE G.C. SHALL CONTACT THE ARCHITECT, ENGINEER, OR TENANT
REPAIRED OR. THE G.C. SHALL REMOVE EX15"TING AND IN5TAL'L NEW SURFACES AT
COOLER ENCLOSURE
TYPE IN HEIGHT iNSON TYPE II B, SPRINKLERED
BUILDING HEIGHT IN S"FURIES 2
KEPKESENTATIVE FRIOK TO BIDDING FOR INTEKFKETATION5 AND CLARIFICATIONS
NO ADDITIONAL C05 T.
CASHWRAP
CODE ANALYSIS.
OF THE DESIGN AND INCLUDE IN HIS DID ALL COSTS TO MEET THE DESIGN INTENT.
F-2.5
GONDOLA/ KEYCHAIN MAGNET DISPLAY
OCCUPANCYGROUP: M
CLAKIFICATION5 MADE BY THE ARCHITECT, ENGINEER, OR "TENANT'S
21. PROVIDE FIRE EXTINGUISHEK(5) HAVING A MINIMUM RATING OF 2 -A.10 -B.0 FOR
>
SPRINKLED: YES
REPRESENTATIVE AFTER BIDDING WILL BE FINAL AND SHALL DE IMPLEMENTED AT
EVERY 2,500 SF OF FLOOR AREA. TRAVEL DISTANCE TO'ANY EXTINGUI5HEK SHALL
BOOK WALL UNIT
STOREAREA: '1430 SFTOTAL
G.G.'5 COST,
NUT EXCEED 75'. LOCATE EX"FINGU15HEK DETWEEN 4" AFF AND 60" AF"F",
>
TOTAL OCCUPANTLOAD: A,
PAPYRUS TABI E
1880 S.F. +60 S.F. PER OCCUPANT = 32 OCCUPANTS
9. ALL ELECTRICAL AND TELEPHONE WIRING AND CONDUIT SHALL BE CONCEALED IN
22. IF REQUIRED DY THE LANDLORD OR LOCAL AUTHORITIE5, THE G.C. SHALL PROVIDE
EGRESS REQUIRED:
WALLS, CEILINGS, OR MILLWORK.
SPRINKLER PLANS FKEFAKED DYA LANDLORD-APPKOVED FLORIDA STATE
32 OCCUPANTS,1.15"PER OCCUPAN'I-=36"MIN,
REQUID PER E
LICENSED CONTRACTOR, AND IF REQUIRED 13Y THE LANDLORD OR LOCAL
(1) EXITS REQUIRED
AUTHORITIES, DE MADE PART OF THE CONSTRUCTION DOCUMENTS.
EGRESS PROVIDED:
(1) STOREFRONT EXffS
TAX. TR VEL DF "(ANCE ROVID ,Di 44'- "
PHIS DRAWING AS AN INSTRUMENT
)F SERVICE, IS AND SHALL REMAIN
FHE PROPERTY OF ARCHITECT.
JSE OF THE DRAB/VING, OR ANY
ZEPRObUCTION THERE OF, WITHOUT
FHE EXPRESS WRITTEN PERMISSION
7F THE DESIGNER IS STRICTLY
'ROHIBITED. SUBMISSION OR
)ISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
-OR ANY OTHER PURPOSES IN
DONJUNCTION WITH THIS PROJECT IS
iOT.TO BE CONSTRUED AS
"LIBLICATION IN DEROGATION OF THIS
ARCHITECTS RIGHTS,
COPYRIGHT 2008
runumb�ert wall fikXSL4RMIP1lIPPIL'� 1f�1+nIPPMnPilili ■RSI
T-1.0
TITLE SHEET
T-1.1
SPECIFICATIONS
T-1.2
SPECIFICATIONS
G-1.0
GENERAL SPECIFICATIONS
G-1.1
GENERAL SPECIFICATIONS
G-1.2
GENERAL SPECIFICATIONS
D-1.0
DEMOLITION AND REMOVALS
D-1.1
DEMOLITION BARRICADE AND TEMP FIXTURES
LS -1.0
LIFE SAFETY PLAN
A-1.0
CONSTRUCTION PLAN
A-1.1
FLOORING MATERIAL PLAN
A-1.2
REFLECTED CEILING PLAN
A-2.0
INTERIOR ELEVATIONS
A-2.1
INTERIOR ELEVATIONS,SIGNS & FINISH SCHEDULE
A-2.2
STOREFRONT ELEVATION
A-3.0
STOREFRONT DETAILS
A-3.1
STOREFRONT DETAILS
A-3.2
STOREFRONT DETAILS
A-4.0
DETAILS
F-1.0
FIXTURE PLAN AND DETAILS
F-2.0
SLATWALL DISPLAY UNIT
F-2.1
COOLER ENCLOSURE
F-2.2
NEWSTOWER
F-2.3
CASHWRAP
F-2.4
CASHWRAP DETAILS
F-2.5
GONDOLA/ KEYCHAIN MAGNET DISPLAY
F-2.6
NESTED TABLES
F-3.0
SOUVENIRS / GIFTS WALL UNIT
F-3.1
ELECTRICAL PANEL ENCLOSURE / WALL UNIT
F-4.0
BOOK WALL UNIT
F-4.1
BOOK TABLE
F-4.2
PAPYRUS WALL UNITS
F-4.3
PAPYRUS TABI E
E-1.1 LIGHTING PLAN
E-1.2 POWER PLAN
E-1.3 FIRE ALARM PLAN
E-1.4 PANEL, SPECS AND RISER DIAGRAM
M-1.1 ) MECHANICAL PLAN AND SPECIFICATIONS
02060 REMOVALS_:
I WORK INCLUDED -
1. RELATED DOCUMENTS:
1. DRAWINGS AND GENERAL PROVISIONS OF THE CON"T"RACT, INCLUDING GENERAL
AND SUPPLEMENTARY CONDITIONS AND DIVISION I GENERAL REQUIREMENTS, APPLY
TO THIS SECTION.
2. EXAMINE ALL OTHER SECTIONS OF THE SPECIFICATIONS FOR REQUIREMENTS
WHICH AFFECT WORK OF THIS SECTION WHETHER OR NOT SUCH WORK IS
SPECIFICALLY MENTIONED IN THIS SECTION.
3. COORDINATE WORK WITH THAT OF ALL OTHER TRADES AFFECTING, OR AFFECTED
BY WORK OF THIS SECTION. COOPERATE WITH SUCH TRADES TO ASSURE THE STEADY
PROGRESS OF ALL PROJECT WORK. ,
2. SEE ARCHITECTURAL, STRUCTURAL, MECHANICAL
AND ELECTRICAL DRAWINGS FOR SPECIFIC REMOVALS (DEMOLITION) AND
REQUIREMEN"T"S.
3. GENERAL REMOVALS AND RELOCATIONS:
1. REMOVE ALL ITEMS, MATERIALS AND FINISHES REQUIRED FOR THE INSTALLATION
OF THE NEW WORK, AND/OR THE RELOCATION OF EXISTING, AS DESCRIBED IN
PERTINENT SECTIONS OF THESE SPECIFICATIONS AND/OR SHOWN ON THE DRAWINGS
INCLUDING BUT NOT LIMITED TO: WALL AND FLOOR SURFACE MATERIALS FOR THE
PROPER ATTACHMENT AND/OR APPLICATION OF NEW FINISHES AND ALL EXISTING
MISCELLANEOUS MECHANICAL AND ELECTRICAL ITEMS, DEVICES AND FIXTURES: SEE
MECHANICAL AND ELECTRICAL DRAWINGS AND SPECIFICATIONS.
2. REMOVE ALL MISCELLANEOUS INCIDENTAL MATERIALS AND ITEMS IN CONFLICT
WITH THE PROPER PREPARATION, INSTALLATION AND FINISHING OF THE NEW WORK.
3. REMOVE ALL EXISTING DAMAGED AND MARRED FINISH MATERIALS AND REPLACE
WITH NEW TO MATCH EXISTING.
4. ITEMS NOTED TO BE REMOVED SHALL BE REMOVED IN THEIR ENTIRETY,
INCLUDING ALL INSTALLATION FASTENINGS, UNLESS OTHERWISE NOTED. ALL ABUTTING
MATERIALS AND FINISHES SHALL BE PATCHED TO MATCH FOR NO NOTICEABLE
REMOVAL INDICATIONS PER SECTION 01045.
5. REPAIR AND PATCH TO MATCH EXISTING WHERE LEFT EXPOSED TO VIEW
OR DAMAGED BY REMOVALS: SEE SECTION 01045.
II MATERIALS - (NA)
III EXECUTION -
1. ALL REMOVALS SHALL BE IN COMPLIANCE WITH ALL LOCAL, STATE ADOPTED CODES,
BUILDING OWNER REQUIREMENTS, AND ALL APPLICABLE FEDERAL SAFETY
REGULATIONS. ALL NEW INTERIOR FINISH MATERIALS MUST BE INSTALLED ON
NON-COMBUSTIBLE SURFACES. WHERE NEW FINISH MATERIALS ARE TO BE INSTALLED
ON EXISTING SURFACES ALL EXISTING FINISH MATERIALS, INCLUDING GLUE, BONDING
AGENTS, ETC., MUST BE REMOVED PRIOR TO INSTALLATION OF ANY NEW MATERIAL.
2. IF ASBESTOS OR ANY OTHER HAZARDOUS MATERIALS ARE ENCOUNTERED, NOTIFY
OWNER IN WRITING PRIOR TO PROCEEDING. STATE GOVERNING AUTHORITY'S
APPROVED METHODS OF PROPER REMOVAL AND DISPOSAL PROCEDURES. UPON
WRITTEN NOTICE FROM OWNER TO PROCEED THESE METHODS AND PROCEDURES ARE
TO BE STRICTLY FOLLOWED.
3. ALL MATERIALS AND ITEMS THAT ARE TO BE REUSED AND RELOCATED IN
CONJUNCTION WITH THE NEW WORK SHALL BE CAREFULLY CUT AWAY FROM THE
EXISTING ABUTTING WORK TRUE TO LINE AT THE NEAREST JOINT, SURFACE BREAK OR
PATTERN LINE TO ENSURE NO NOTICEABLE DIFFERENCE BETWEEN NEW AND EXISTING
TO REMAIN. REMOVALS SHALL BE KEPT TO A MINIMUM. MATERIALS TO BE REUSED AND
RELOCATED SHALL BE PROPERLY HANDLED, TAGGED AND STORED TO PREVENT
DAMAGING AND BREAKING.
4. CAREFULLY COORDINATE ALL TRADES TO ENSURE PROPER AND ADEQUATE
INTERFACE OF THE WORK.
5. WHEN WORK IS STOPPED, PROVIDE AND MAINTAIN IN PLACE SUITABLE COVERINGS
AND BARRIERS FOR PROTECTION OF THE WORK AND SAFETY FOR ALL PERSONNEL AND
BUILDING USERS.
6. PROTECT ALL WORK, EXISTING AND NEW, FROM DAMAGE BY ANY CAUSE
THROUGHOUT THE DEMOLITION OPERATIONS. PROTECTIVE COVERINGS OR BARRIERS
SHALL NOT MAR, STAIN OR PENETRATE THE FINISHED WORK.
7. COORDINATION OF THE WORK:
I. COORDINATE ANY ALL MECHANICAL AND ELECTRICAL WORK FOR
THE PROPER DISCONNECTIONS; PROTECTIONS AND CAPPINGS: SEE MECHANICAL
AND ELECTRICAL DRAWINGS AND SPECIFICATIONS.
2. IF APPLICABLE, COORDINATE ALL STRUCTURAL WORK FOR THE PROPER
PHASING, STAGING AND SEQUENCE OF REMOVAL REQUIREMENTS: SEE STRUCTURAL
DRAWINGS AND SPECIFICATIONS.
8. UNDERTAKE WHATEVER PRECAUTIONS ARE NECESSARY TO CONTROL AND
PREVENT EXCESSIVE DUST DURING REMOVALS. DO NOT ALLOW DUST BEYOND THE
CONTRACT LIMIT LINE.
9. REMOVE ALL PORTIONS OF THE WORK IN A SAFE MANNER WITH CARE TO PREVENT
DAMAGE TO ADJACENT AND REMAINING STRUCTURE, FINISHES OR ANY OTHER ITEMS
OF THE TENANTS PROPERTY OR OTHER TENANT AREAS AND PUBLIC SPACES.
Q3500 CEMENTITIOUS UNO-ERL-AYMENT-:
05500 MISCELLANEOUS METALS:
I WORK INCLUDED -
I WORK INCLUDED -
1. RELATED DOCUMENTS:
1. RELATED DOCUMENTS:
1. DRAWINGS AND GENERAL PROVISIONS OF THE CONTRACT, INCLUDING GENERAL
1. DRAWINGS AND GENERAL PROVISIONS OF THE CONTRACT, INCLUDING GENERAL
AND SUPPLEMENTARY CONDITIONS AND DIVISION 1 GENERAL REQUIREMENTS, APPLY
AND SUPPLEMENTARY CONDITIONS AND DIVISION 1 GENERAL REQUIREMENTS, APPLY
TO THIS SECTION.
TO THIS SECTION.
2. EXAMINE ALL OTHER SECTIONS OF THE SPECIFICATIONS FOR REQUIREMENTS
2. EXAMINE ALL OTHER SECTIONS OF THE SPECIFICATIONS FOR REQUIREMENTS
WHICH AFFECT WORK OF THIS SECTION WHETHER OR NOT SUCH WORK IS
WHICH AFFECT WORK OF THIS SECTION WHETHER OR NOT SUCH WORK IS
SPECIFICALLY MENTIONED IN THIS SECTION.
SPECIFICALLY MENTIONED IN THIS SECTION.
3. COORDINATE WORK WITH THAI" OF ALL OTHER TRADES AFFECTING, OR AFFECTED
3. COORDINATE WORK WITH THAT OF ALL OTHER TRADES AFFECTING, OR AFFECTED
BY WORK OF THIS SECTION. COOPERATE WITH SUCH TRADES TO ASSURE THE STEADY
BY WORK OF THIS SECTION. COOPERATE WITH SUCH TRADES TO ASSURE THE STEADY
PROGRESS OF ALL PROJECT WORK.
PROGRESS OF ALL PROJECT WORK.
2. PROVIDE AND INSTALL:
2. PROVIDE AND INSTALL:
I. ALL FLASH PATCHING REQUIRED FOR THE PROPER INSTALLATION OF ALL FINISH
1. ALL MISCELLANEOUS METAL, INCLUDING BUT NOT LIMITED TO, STRUCTURAL
FLOORING SECTIONS OF THESE SPECIFICATIONS.
SUPPORT STEEL AND SUPPORT STEELFOR OVERHEAD OR SIDEFOLDING GRILLE AS
SHOWN ON THE DRAWINGS, AND ALL FASTENERS AND ANCHORAGE DEVICES FOR THE
2. ALL FLOOR LEVELING REQUIRED FOR FLOOR ELEVATIONS SHOWN.
INSTALLATION OF WORK FOR THIS AND ALL SECTIONS OF THESE SPECIFICATIONS
INCLUDING (MECHANICAL AND) ELECTRICAL WORK.
3. FILL ALL EXISTING UNUSED AND ABANDONED FLOOR PENETRATIONS.
3. PROVIDE COORDINATED SHOP DRAWINGS AND PRODUCT LITERATURE
3. PROVIDE MANUFACTURER'S PRODUCT DATA LITERATURE IN
ON ALL ITEMS AND SAMPLES OF ALL FINISHES IN ACCORDANCE WITH SECTION 01300 OF
ACCORDANCE WITH SECTION 01300 OF THESE SPECIFICATIONS.
THESE SPECIFICATIONS.
4. ALL WORK SHALL BE HIGHEST IN QUALITY IN COMPLIANCE WITH
4. PROVIDE CLEANING DATA IN ACCORDANCE WITH SECTION 01710 OF
MANUFACTURER'S WRITTEN INSTRUCTIONS AND APPLICABLE CODE REQUIREMENTS.
THESE SPECIFICATIONS. INCLUDE RECOMMENDED CLEANING METHODS, CLEANING
MATERIALS AND STAIN REMOVAL METHODS.
I. QUALIFIED EXPERIENCED INSTALLER (APPLICATOR) OF MATERIAL SPECIFIED,
ACCEPTABL E TO "THE MANUFACTURER, WHO HAS A SUCCESSFUL RECORD OF
5. ALL WORK SHALL BE HIGHEST IN QUALITY IN COMPLIANCE WITH AISC,
COMPLETING CEMENT -BASED UNDERLAYMENT APPLICATIONS SIMILAR IN MATERIAL
ASTM, MFMA, NAAMM, AWS, SSPC STANDARDS AND APPLICABLE CODE REQUIREMENTS.
AND EXTENT TO THAT REQUIRED FOR THIS PROJECT
II MATERIALS -
II MATERIALS -
1. ALL MISCELLANEOUS SUPPORT STEEL AND CLOSURE ITEM MATERIAL,
I. UNDERLAYMENT: CEMENT BASED POLYMER -MODIFIED,
FABRICATION AND ERECTION SHALL COMPLY WITH THE REQUIREMENTS OF THE AISC
SELF -LEVELING, FILL, PATCHING AND RESURFACING COMPOUND CAPABLE OF
STANDARD SPECIFICATIONS FOR STRUCTURAL STEEL, WITH SUPPLEMENTS TO DATE.
FEATHEREDGE TO SIX INCH THICKNESS AS MANUFACTURED BY: ARDEX, INC., K-15
SELF -LEVELING UNDERLAYMENT CONCRETE; CONSPEC MARKETING AND
1. IN FABRICATION OF ITEMS WHICH WILL BE EXPOSED TO VIEW, LIMIT MATERIALS TO
MANUFACTURING CO., INC., CONFLOW; L&M CONSTRUCTION CHEMICALS, INC., LEVELEX
THOSE WHICH ARE FREE FROM SURFACE BLEMISHES, PITTING, ROLLED TRADE NAMES,
UNDERLAYMENT, OR ARCHITECT ACCEPTED EQUAL.
AND ROUGHNESS.
1. CEMENT BINDER: ASTM Com' 150, PORTLAND CEMENT, OR HYDRAULIC BLENDED
2. COMPLY WITH FOLLOWING STANDARDS, AS PERTINENT:
CEMENT AS DEFINED BY ASTM C 219. COMPRESSIVE STRENGTH NOT LESS THAN 4100
PSI (28 MPA) AT 28 DAYS WHEN TESTED ACCORDING TO ASTM C 109/C 109M.
1. STEEL PLATES, SHAPES, AND BARS: ASTM A36
2. STEEL PLATES TO BE BENT OR COLD -FORMED: ASTM A283
2. UNDERLAYMENT ADDITIVE: RESILIENT -EMULSION PRODUCT OF UNDERLAYMENT
MANUFACTURER FORMULATED FOR USE WITH UNDERLAYMENT WHEN APPLIED TO
SUBSTRATE AND CONDITIONS INDICATED.
2. AGGREGATE: WELL -GRADED, WASHED GRAVEL, 1/8 TO 1/4 INCH, OR
COARSE SAND AS RECOMMENDED BY UNDERLAYMENT MANUFACTURER.
I. PROVIDE AGGREGATE WHEN RECOMMENDED IN WRITING BY UNDERLAYMENT
MANUFACTURER FOR UNDERLAYMENT THICKNESS REQUIRED.
2. WATER: POTABLE AND AT A "TEMPERATURE NOT MORE THAN 70 DEG. F.
3. PRIMER: PRODUCT OF UNDERLAYMENT MANUFACTURER, RECOMMENDED IN
WRITING, FOR SUBSTRATE CONDITIONS AND APPLICATIONS INDICATED.
III EXECUTION -
1. EXAMINE SUBSTRATES, WITH INSTALLER PRESENT, FOR CONDITIONS
AFFECTING PERFORMANCE OF UNDERLAYMENT INCLUDING SUBSTRATE MOISTURE
CONTENT. BEGIN UNDERLAYMENT APPLICATION ONLY AFTER UNSATISFACTORY
CONDITIONS HAVE BEEN CORRECTED.
2. PROPERLY PREPARE AND CLEAN SUBSTRATE, IN ACCORDANCE WITH
MANUFACTURER'S WRITTEN INSTRUCTIONS FOR SUBSTRATE INDICATED PRIOR TO
APPLICATION. PROVIDE CLEAN, DRY, NEUTRAL -PH SUBSTRATE FOR UNDERLAYMENT
APPLICATION.
1. TREAT NON-MOVING SUBSTRATE CRACKS TO PREVENT CRACKS FROM
TELEGRAPHING (REFLECTING) THROUGH UNDERLAYMENT IN ACCORDANCE WITH
MANUFACTURER'S WRITTEN RECOMMENDATIONS.
2. FILL SUBSTRATE VOIDS TO PREVENT UNDERLAYMENT FROM LEAKING.
3. MECHANICALLY REMOVE LAITANCE, GLAZE, EFFLORESCENCE, CURING
COMPOUNDS, FORM -RELEASE AGENTS, DUST, DIRT, GREASE, OIL, AND OTHER
CONTAMINANTS THAT MIGHT IMPAIR UNDERLAYMENT BOND ACCORDING TO
MANUFACTURER'S WRITTEN INSTRUCTIONS.
4. AFTER SUBSTRATE PREPARATION, TEST SUBSTRATE FOR ADHESION WITH
UNDERLAYMENT ACCORDING TO MANUFACTURER'S WRITTEN INSTRUCTIONS.
3. MIX, APPLY AND CURE UNDERLAYMENT IN ACCORDANCE WITH
MANUFACTURER'S WRITTEN INSTRUCTIONS.
1. COORDINATE APPLICATION OF COMPONENTS TO PROVIDE OPTIMUM
UNDERLAYMENT-To-SUBSTRATE AND INTERCOAT ADHESION.
2. APPLY UNDERLAYMENT TO PRODUCE UNIFORM, LEVEL SURFACE, APPLY FINAL
LAYER WITHOUT AGGREGATE TO PRODUCE A SMOOTH SURFACE. FEATHER EDGES TO
MATCH ADJACENT FLOORING.
10. ALL MATERIALS UNLESS NOTED TO BE REUSED OR TO BE SALVAGED SHALL BE
REMOVED OFF THE PROPERTY TO AN AVAILABLE DUMP OR SITE OF THE
CONTRACTOR'S OWN CHOOSING AND ARE TO BE PROPERLY AND RESPONSIBLY
DISPOSED OF.
3. STEEL TUBING (HOT -FORMED, WELDED, OR SEAMLESS): ASTM A501
4. STEEL BARS AND BAR -SIZE SHAPES: ASTM A306, GRADE 65. OR ASTM A36
5. COLD -FINISHED STEEL BARS: ASTM A108
6. COLD -ROLLED CARBON STEEL SHEETS: ASTM A336
7. GALVANIZED CARBON STEEL SHEETS: ASTM A526, WITH G90 ZINC
COATING IN ACCORDANCE WITH ASTM A525
8. GRAY IRON CASTINGS: ASTM A48, CLASS 10
9. MALLEABLE IRON CASTINGS: ASTM A47
10. STEEL PIPE: ASTM A53 GRADE A, SCHEDULE 40, BLACK FINISH UNLESS
OTHERWISE NOTED
11. CONCRETE INSERTS:
1. THREADED OR WEDGE TYPE GALVANIZED FERROUS CASTINGS OF MALLEABLE
IRON COMPLYING WITH ASTM A27
2. PROVIDE REQUIRED BOLTS, SHIMS, AND WASHERS, HOT -DIP GALVANIZED IN
ACCORDANCE WITH ASTM A153.
3. ALL STEEL SHALL BE SHOP PRIME FINISHED FOR CONCEALED ITEMS AND
SCHEDULED FINISH FOR EXPOSED TO VIEW ITEMS.
1. PRIMER: USE "10-99 TNEMEC PRIMER" OR "RUSTOLEUM NUMBER 5769 PRIMER"
2. FOR REPAIR OF GALVANIZING, USE A HIGH ZINC -DUST CONTENT PAINT COMPLYING
WITH MIL -21035.
4. THE CONTRACTOR SHALL FURNISH MILL TEST REPORTS FROM THE PRODUCER OF
THE STEEL CERTIFYING THAT THE STEEL MEETS THE MINIMUM REQUIREMENTS AS
DEFINED BY ASTM SPECIFICATIONS.
5. LOOSE LINTELS SHALL BE INSTALLED OVERALL OPENINGS IN MASONRY WALLS AS
LISTED BELOW EXCEPT WHERE OTHERWISE DETAILED ON THE DRAWINGS:
OPENING LINTEL NOTE
4'-0" OR LESS 4" X 3 1/2" X 5/16 3 1/2" LEGS ARE HORIZONTAL
2. ALL WELDING SHALL BE IN ACCORDANCE WITH THE STANDARD CODE
FOR ARC AND GAS WELDING IN BUILDING CONSTRUCTION OF THE AMERICAN WELDING
SOCIETY. WELDING ELECTRODES SHALL CONFORM TO ASTM SPECIFICATIONS E-70XX.
ALL BUTT WELDS SHALL BE 1005 PENETRATION WELDS AND FILLET WELDS SHALL BE A
MINIMUM 3/16".
3. ALL FASTENERS, THREADED AND DRIVEN, SHALL BE THE BEST OF
THEIR RESPECTIVE TYPE, GRADE AND CLASS AND SHALL BE USED IN SUFFICIENT
NUMBERS AND CORRECT SIZES FOR THE PARTICULAR APPLICATIONS. ALL FASTENERS
SHALL BE HIDDEN IN THE FINISHED WORK. FASTENERS FOR EXTERIOR USE AND WHERE
BUILT INTO EXTERIOR WALLS SHALL BE ZINC COATED FASTENERS.
4. ALL OTHER MISCELLANEOUS INCIDENTAL ITEMS AND MATERIALS IN
TYPES SHOWN OR NOTED INCLUDING BUT NOT LIMITED TO; FASTENERS, ATTACHMENTS
AND GROUT SHOWN, NOTED AND/OR REQUIRED FOR FULL COMPLETION OF THE WORK,
SHALL BE OF QUALITY COMPARABLE AND COMPATIBLE TO MATERIALS SPECIFIED.
4. FIELD QUALITY CONTROL: III EXECUTION -
11. VERIFY SALVAGE REQUIREMENTS FOR ALL MATERIALS NOTED TO BE REMOVED
WITH THE AIRPORT AND TENANT REPRESENTATIVE. MATERIALS NOTED TO BE 1. SLUMP TEST: IF SLUMP TEST IS RECOMMENDED IN WRITING BY 1. INSTALL ALL ITEMS IN ACCORDANCE WITH ACCEPTED SHOP DRAWINGS
SALVAGED SHALL BE STORED PER INSERT BUILDING OWNER OR AUTHORITY AND THE MANUFACTURER, TEST UNDERLAYMENT FOR SLUMP AS IT IS PLACED FOR COMPLIANCE AND MANUFACTURER'S WRITTEN INSTRUCTIONS. PLUMB, LEVEL AND TRUE WITHOUT
TENANT DIRECTIONS. WITH MANUFACTURER'S WRI"T"TEN RECOMMENDATIONS. DISTORTION, ALIGNED AND FITTED PROPERLY. COORDINATE WITH ALL BUILT-IN ITEMS
OF OTHER SECTIONS OF THESE SPECIFICATIONS FOR CUTOUT LOCATIONS AND SIZE,
12. ALL REMOVALS SHALL LEAVE "THE EXISTING SURFACES AND SUBSTRATES FREE AND 2. FIELD SAMPLES: TAKE AT LEAST THREE MOLDED -CUBE SAMPLES SUPPORT AND ATTACHMENT REQUIREMENTS.
CLEAN FOR THE PROPER PATCHING AND PREPARATION REQUIRED FOR THE SPECIFIED FROM EACH UNDERLAYMENT BATCH. TEST SAMPLES ACCORDING TO ASTM C 109/C
NEW MATERIALS AND FINISHES. 109M FOR COMPLIANCE WITH COMPRESSIVE -STRENGTH REQUIREMENTS. 2. PROPERLY PROTECT ALL FINISH SURFACES UNTIL INSTALLATION
COMPLETION AND JUST PRIOR TO ARCHITECT'S FINAL ACCEPTANCE.
13. PERFORM ALL WORK IN ACCORDANCE WITH SECTIONS 01045, 01400, 01600 AND 5. DO NOT INSTALL (APPLY) FINISH FLOORING OVER UNDERLAYMENT
0'1710 OF "THESE SPECIFICATIONS. UNTIL AFTER TIME PERIOD RECOMMENDED BY UNDERLAYMENT MANUFACTURER. 3. PERFORM ALL WORK IN ACCORDANCE WITH SECTIONS 01045, 01400,
01600 AND 01710 OF THESE SPECIFICATIONS.
END OF SECTION 02060 6. REMOVE AND REPLACE UNDERLAYMENT AREAS THAT EVIDENCE LACK
OF BOND WITH SUBSTRATE, INCLUDING AREAS THAT EMIT A "HOLLOW" SOUND WHEN END OF SECTION 05500
TAPPED.
7. PERFORM ALL WORK IN ACCORDANCE WITH SECTIONS 01045, 01400,
01600 AND 01710 OF THESE SPECIFICATIONS.
END OF SECTION 03500
THIS DRAWING AS AN INSTRUMENT
OF SERVICE, IS AND SHALL REMAIN
THE PROPERTY OF ARCHITECT.
USE OF THE DRAWING, OR ANY
REPRODUCTION THERE OF, WITHOUT
THE EXPRESS WRITTEN PERMISSION
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION IN DEROGATION OF THIS
ARCHITECTS RIGHTS.
COPYRIGHT 2008
NO. DATE REVISION
061 QO CARPENTRY:
WORK INCLUDED -
1. RELATED DOCUMENTS
I. DRAWINGS AND GENERAL PROVISIONS OF THE CONTRACT, INCLUDING GENERAL
AND SUPPLEMENTARY CONDITIONS AND DIVISION 1 GENERAL REQUIREMENTS, APPLY
TO THIS SECTION.
2. EXAMINE ALL OTHER SECTIONS OF THE SPECIFICATIONS FOR REQUIREMENTS
WHICH AFFECT WORK OF THIS SECTION WHETHER OR NOT SUCH WORK IS
SPECIFICALLY MENTIONED IN THIS SECTION.
3. COORDINATE WORK WITH THAT OF ALL OTHER TRADES AFFECTING, OR AFFECTED
BY WORK OF THIS SECTION. COOPERATE WITH SUCH TRADES TO ASSURE THE STEADY
PROGRESS OF ALL PROJECT WORK.
'r#Tii � : �[71►E9rGL�
1. ALL ROUGH CARPENTRY INCLUDING BUT NOT LIMITED TO, WOOD BLOCKING,
SUPPORT GROUNDS, FURRING, BACKBOARDS, ANCHORS AND ROUGH HARDWARE AND
OTHER INCIDENTAL ROUGH CARPENTRY WORK AS REQUIRED FOR WORK OF ALL
SECTIONS OF THESE SPECIFICATIONS INCLUDING STRUCTURAL, MECHANICAL AND
ELECTRICAL WORK: SEE DRAWINGS.
2. MISCELLANEOUS CUTTING AND PATCHING FOR ALL SECTIONS OF THESE
SPECIFICATIONS INCLUDING MECHANICAL AND ELECTRICAL WORK: SEE SECTION 01045.
3. FIRESTOPPING AT ALL FLOOR AND WALL PENETRATIONS. PROVIDE UL FIRE
RESISTANCE DIRECTORY DETAIL FOR EACH DIFFERENT INSTALLATION PROVIDED.
4. ALL TEMPORARY CONSTRUCTION REQUIREMENTS, INCLUDING BUT NOT LIMITED "TO
TEMPORARY CONSTRUCTION PARTITIONS, SCAFFOLDING, SCREENS, BARRIERS AND
SUPPORTS FOR REMOVALS, RE -INSTALLATIONS AND NEW WORK, INCLUDING
STRUCTURAL, MECHANICAL AND ELECTRICAL WORK, IN COORDINATION WITH
REQUIRED PHASING OF THE PROJECT.
5. ALL WOOD SHALL BE FIRE RETARDANT TREATED.
6. RODENT INFESTATION PREVENTION AT FLOOR AND WALL PENETRATIONS. WHEN
REQUIRED BY HEALTH CODE FOR FOOD SERVICE AREAS.
3. PROVIDE COORDINATED SHOP DRAWINGS AND `'AMPLES OF ITEMS AS
MAY BE REQUESTED BY THE ARCHITECT.
1. UPON COMPLETION OF THIS PORTION OF THE WORK, COMPLETE AND POST
CERTIFICATES OF COMPLIANCE IN ACCORDANCE WITH PERTINENT REQUIREMENTS OF
GOVERNMENTAL AGENCIES HAVING JURISDICTION.
4. ALL WORK SHALL BE HIGHEST IN QUALITY IN COMPLIANCE WITH ALSO,
APA, AWPA, NHLA, PSI, PS 20 AND APPLICABLE CODE REQUIREMENTS. "TREAT ALL
LUMBER AND WOOD WITH FIRE RETARDANT AS REQUIRED FOR TYPE, USE AND CODE.
1. IN ADDITION TO COMPLYING WITH PERTINENT CODES AND REGULATIONS OF
GOVERNMENTAL AGENCIES HAVING JURISDICTION, UNLESS OTHERWISE SPECIFICALLY
DIRECTED OR PERMITTED BY THE ARCHITECT COMPLY WITH:
1. "PRODUCT USE MANUAL" OF THE WESTERN WOOD PRODUCTS
ASSOCIATION FOR SELECTION AND IJSE OF PRODUCTS INCLUDED IN THAT MANUAL;
2. "PLYWOOD SPECIFICATION AND GRADE GUIDE" OF THE AMERICAN
PLYWOOD ASSOCIATION.
MATERIALS -
1. ALL ROUGH CARPENTRY LUMBER SHALL BE CONSTRUCTION GRADE
SEASONED, S4S DOUGLAS FIR OR WESTERN LARCH, SEASONED TO 10% OR LESS
MOISTURE CONTENT. EACH PIECE SHALL BE GRADE STAMPED WITH OFFICIAL MARK OF
RESPONSIBLE GRADING RULES ASSOCIATION. HIDDEN AND EXPOSED PLYWOOD, DFPA,
INTERIOR AND EXTERIOR C -C GRADE MANUFACTURED IN ACCORDANCE WITH APA AND
PS 1-66 STANDARDS. EACH PIECE SHALL BE GRADE STAMPED.
2. THREADED AND DRIVEN FASTENERS SHALL BE HOT -DIPPED
GALVANIZED AFTER FABRICATION AND THE BEST OF THEIR RESPECTIVE TYPE, GRADE
AND CLASS, AND SHALL BE USED IN SUFFICIENT NUMBER AND CORRECT SIZES FOR THE
PARTICULAR APPLICATION.
3. ALL WOOD AND WOOD PRODUCTS SHALL BE FIRE RETARDANT
TREATED IN COMPLIANCE WITH THE LOCAL AND STATE BUILDING CODES: PRESSURE
TREATED WITH FIRE RETARDANT CHEMICALS, AND GRADE STAMPED, IN ACCORDANCE
WITH REFERENCE STANDARDS CITED.
1. LUMBER AWPA C20-1988
2. PLYWOOD AW PAC27-1988
4. FIRESTOPPING
1. 3M FIRE PROTECTION PRODUCTS, OR ARCHITECT ACCEPTED EQUAL
FIRESTOPPING AND SMOKE -STOPPING SYSTEMS AND DEVICES, AS LISTED IN THE UL
FIRE RESISTANCE DIRECTORY FOR EACH RATED WALL AND FLOOR PENETRATION
CONDITION.
5. ALL TEMPORARY CONSTRUCTION PARTITIONS, SCAFFOLDING,
SCREEN, BARRIER AND SUPPORT TYPES, MATERIALS, FINISHES AND THEIR LOCATIONS
SHALL BE IN ACCORDANCE WITH THE BUILDING OWNER'S TENANT CONSTRUCTION
REQUIREMENTS AND ARE TO BE REVIEWED AND COORDINATED WITH THE BUILDING
OWNER'S REPRESENTATIVE FOR ACCEPTANCE PRIOR TO COMMENCEMENT OF THE
WORK,
6. RODENT INFESTATION PREVENTION:
1. GALVANIZED 18 GA. SHEET METAL COLLARS, SIZED TO OVERLAP OPENING AND
TIGHT TO PENETRATING ITEM, AND ADHESIVE COMPATIBLE TO SURFACES ADHERED.
III EXECUTION -
1. SET ALL ROUGH CARPENTRY WORK AND TEMPORARY
CONSTRUCTION ACCURATELY TO REQUIRED LEVELS AND LINES WITH MEMBERS PLUMB
AND TRUE AND ACCURATELY CUT AND FITTED. SECURELY ATTACH THE WORK TO
SUBSTRATE BY ANCHORING AND FASTENING AS REQUIRED BY RECOGNIZED
STANDARDS.TEMPORARY CONSTRUCTION ITEMS SHALL BE INSTALLED IN A WAY TO
MINIMIZE MARRING AND DAMAGING EXISTING FINISHES. ALL SUCH MARRING AND
DAMAGE SHALL BE CORRECTED, PATCH TO MATCH, TO NO NOTICEABLE DIFFERENCE
PER SECTION 01400 OF THESE SPECIFICATIONS.
2. ' HANDLE, STORE AND INSTALL FIRE RETARDANT (FR -S)
MATERIALS IN ACCORDANCE WITH MANUFACTURER'S DIRECTIONS AND AS REQUIRED
TO MEET REQUIRED CLASSIFICATION OR RATING.
3. TEMPORARY CONSTRUCTION PARTITIONS, SCAFFOLDING,
SCREENS, BARRIERS AND SUPPORT -S SHALL REMAIN IN PLACE UNTIL WORK IS
COMPLETED. UPON COMPLETION OF THE WORK, OR PORTION THEREOF PER REQUIRED
PHASING, REMOVE ITEMS IN THEIR ENTIRETY INCLUDING ALL FASTENINGS. PATCH TO
MATCH AND CLEAN AND REPAIR ALL EXISTING SURFACES AFFECTED BY ITEM
PLACEMENT AND SUPPORT INSTALLATION AND REMOVAL. RE -INSTALL APPLICABLE
UNDAMAGED RE -USED ITEMS FOR SUCCEEDING PHASES.
4. APPLY FIRESTOPPING TO PROPERLY PREPARED CLEAN
SUBSTRATE SURFACES FREE OF DIRT, DUST; GREASE, OIL, LOOSE MATERIAL, OR
OTHER MATTER WHICH MAY AFFECT BOND OF FIRESTOPPING MATERIAL. APPLY PRIMER
AND MATERIALS IN ACCORDANCE WITH MANUFACTURER'S INSTRUCTIONS AND APPLY
FIRESTOPPING MATERIAL IN SUFFICIENT THICKNESS TO ACHIEVE RATING OF SURFACE
PENETRATED AND TO UNIFORM DENSITY AND TEXTURE, INSTALL MATERIAL AT FLOORS,
WALLS OR PARTITION OPENINGS WHICH CONTAIN PENETRATING SLEEVES, PIPING,
DUCTWORK, CONDUIT AND OTHER ITEMS REQUIRING FIRESTOPPING.
5. PERFORM ALL WORK IN ACCORDANCE WITH SECTIONS 01045,
01400, 01600 AND 01710 OF THESE SPECIFICATIONS.
END OF SECTION 06100
06400ARCH ITEICT 1_RAL. VVO.ODW.OI?II(..:
I WORK INCLUDED -
1. RELATED DOCUMENTS:
I. DRAWINGS AND GENERAL PROVISIONS OF THE CONTRACT, INCLUDING GENERAL
AND SUPPLEMENTARY CONDITIONS AND DIVISION 1 GENERAL REQUIREMENTS, APPLY
TO THIS SECTION.
2. EXAMINE ALL OTHER SECTIONS OF THE SPECIFICATIONS FOR REQUIREMENTS
WHICH AFFECT WORK OF THIS SECTION WHETHER OR NOT SUCH WORK IS
SPECIFICALLY MENTIONED IN THIS SECTION.
3. COORDINATE WORK WITH THAT OF ALL OTHER TRADES AFFECTING, OR
AFFECTED BY WORK OF THIS SECTION. COOPERATE WITH SUCH TRADES TO ASSURE
THE STEADY PROGRESS OF ALL PROJECT WORK.
2. PROVIDE AND INSTALL
1. ARCHITECTURAL WOODWORK ITEMS AS SCHEDULED AND SHOWN ON THE
DRAWINGS.
2. TEMPLATES FOR ALL WALL DISPLAYS AND OTHER AW UNITS, AS SHOWN ON THE
PLANS (TEMPLATE THICKNESS TO MATCH FINISH FLOOR HEIGHT).
3. ALL MISCELLANEOUS INCIDENTAL ITEMS, INCLUDING BUT NOT LIMITED TO
PLASTIC LAMINATE AND MELAMINE, WOOD VENEER AND HARDWOOD, CABINET, DISPLAY
CASE, DOOR AND ROLL -UP DOOR HARDWARE, METAL TRIM, SLATWALL, GLASS AND
SHEET PLASTIC, PAINT, STONE, WOOD CEILING SYSTEM, FABRIC COVERED PANELS,
METAL STUD AND WOOD FRAMING, MASONITE, FASTENERS, ANCHORAGE DEVICES,
SEALANTS, FILLERS AND ADHESIVES AS REQUIRED FOR THE INSTALLATION OF THE
SCHEDULED ITEMS AND AS SHOWN ON THE DRAWINGS AND AS REQUIRED FOR FULL
COMPLETION OF THE WORK.
2. PROVIDE COORDINATED SHOP DRAWINGS OF ALL ITEMS, SAMPLES OF
SLATWALL AND ALL FINISHES, INCLUDING WOOD VENEER FLITCHES, AND ON-SITE
MOCK-UPS OF ALL ITEMS, WHERE REQUESTED, IN ACCORDANCE WITH SECTION 01300
OF THESE SPECIFICATIONS.
1. (3) 12 X12 OR (3) 8 X 10 FINISH SAMPLES.
3. PROVIDE CLEANING DATA IN ACCORDANCE WITH SECTION 0171Q OF THESE
SPECIFICATIONS. INCLUDE RECOMMENDED CLEANING METHODS, CLEANING MATERIALS
AND STAIN REMOVAL METHODS.
4. ALL WORK SHALL BE HIGHEST IN QUALITY IN COMPLIANCE WITH AW]
GRADES SPECIFIED AND APPLICABLE CODES. TREAT ALL LUMBER AND WOOD WITH
FIRE RETARDANT AS REQUIRED FOR TYPE, USE AND CODE
MATERIALS - SEE FINISH SCHEDULE ON DRAWINGS
1. PLYWOOD OR MEDIUM DENSITY FIBERBOARD/PLASTIC LAMINATE FACED
CABINET WORK AND PANELS SHALL BE AW] PREMIUM GRADE QUALITY. (USE FIRE
RATED CORE MATERIAL AND FIRE RATED HORIZONTAL GRADE PLASTIC LAMINATES FOR
ALL PLASTIC LAMINATE TYPES.) (THE USE OF PVC IS NOT ALLOWED.)
I. PLASTIC LAMINATES: (ADHESIVES, BACKER SHEETS AND SUBSTRATES PER
MANUFACTURER'S SPECIFICATIONS (TO MAINTAIN MEA RATINGS).
2. DRAWER AND CABINET INTERIORS:
1. MELAMINE CABINET INTERIORS AND BALTIC BIRCH VENEER WITH CLEAR LACQUER
FINISH DRAWERS.
2. PLYWOOD OR MEDIUM DENSITY FIBERBOARD/WOOD VENEER FACED
CABINET WORK AND PANELS WITH HARDWOOD EDGING SHALL BE AWI PREMIUM GRADE
QUALITY FOR ALL WOOD VENEER TYPES. (USE FIRE RATED CORE MATERIAL).
3. WD1 SPECIFIED VENEER WITH A CLOSED PORE LIGHTLY STAINED SATIN
LACQUER CATALYTIC FINISH, TO MATCH ARCHITECT'S SAMPLE FOR COLOR ONLY. ALL
WOOD PANELED SURFACES ADJOINED OR BUTTING REVEALS ARE TO BE BOOK
MATCHED WITH ALL GRAIN TO BE VERTICAL. HARDWOOD TRIM: STAINED AND FINISHED
TO MATCH WD1.
4. SLATWALL:
1. SLI SPACEWALL INTERNATIONAL (800-524-1590) FIRE -RATED MEDIUM DENSITY
FIBERBOARD. FINISH TO MATCH WD1 FINISH, AND CLEAR ANODIZED ALUMINUM
EXTRUSION 'T': CLASS A
5. METAL "TRIM:
1. STYLMARK TRIM MAKER ANODIZED ALUMINUM- TYPE AND FINISH AS NOTED AND
DETAILED ON THE DRAWINGS.
(NOTE: PRE -ORDER STYLMARK ITEMS, LONG LEAD TIME, 6 WEEKS+)
3. 16 GA. SATIN STAINLESS STEEL CLADDING WITH MITERED AND RADIUSED
CORNERS AND TIGHT ALIGNED FLUSH HAIRLINE BUTT JOINTS AS NOTED AND DETAILED
ON THE DRAWINGS.
4. FUTURA INDUSTRIES CLEAR ANODIZED ALUMINUM 90° OUTSIDE CORNER TRIM,
DIE 5116, ITEM #60080, WITH MITERED CORNERS AS NOTED AND DETAILED ON THE
DRAWINGS.
6. PAINT FINISH: SEE DRAWINGS
7. CABINET, DISPLAY CASE, DOOR AND ROLL -UP DOOR HARDWARE AS NOTED
ON THE DRAWINGS
8. GLASS:
1. 1/4" TEMPERED CLEAR GLASS, WITH ALL EDGES POLISHED, AS MANUFACTURED
BY LOF, GLOBE AMERADA, PPG INDUSTRIES OR ARCHITECT ACCEPTED EQUAL.
2. 3/8" "TEMPERED CLEAR GLASS, WITH ALL EDGES POLISHED, AS MANUFACTURED
BY LOF, GLOBE AMERADA, PPG INDUSTRIES OR ARCHITECT ACCEPTED EQUAL.
9. SHEET PLASTIC:
1. 1/8" CLEAR LEXAN, WITH ALL EDGES POLISHED
2. 1/8" BLACK LEXAN, WITH ALL EDGES POLISHED
'10. SOLID SURFACING
AS NOTED AND DETAILED ON THE DRAWINGS
11. METAL STUD FRAMING SYSTEMS FOR ARCHITECTURAL WOODWORK
SUPPORT REQUIREMENTS.
1. IN AUDITION TO COMPLYING WITH THE PERTINENT CODES AND REGULATIONS OF
GOVERNMENTAL AGENCIES HAVING JURISDICTION, COMPLY WITH PERTINENT
RECOMMENDATIONS CONTAINED IN "SPECIFICATIONS FOR METAL LATHING AND
FURRING" PUBLISHED BY THE METAL LATH/STEEL FRAMING ASSOCIATION.
1. METAL STUD FRAMING, UNLESS OTHERWISE SHOWN ON THE DRAWINGS, SHALL
BE STANDARD PUNCHED STEEL STUDS AND TRACK OF THE SIZES AND SHAPES SHOWN
ON THE DRAWINGS, EITHER ELECTROLYTIC ZINC COATING (ASTM DESIGNATION A 591,
CLASS B) OR PAINTED WITH 1.0 MIL DRY FILM THICKNESS) RUST -INHIBITIVE ZINC
CHROMATE PRIMER PAINT, AT MANUFACTURERS OPTION. ALL INTERIOR METAL STUDS
AND THEIR ATTENDANT TRACK, LONGER THAN 12'-0" IN HEIGHT SHALL BE 20 GAUGE.
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
TERMINAL A -INTERNATIONAL DEPARTURES- UPPER LEVEL
ORLANDO SANFORD
INTERNATIONAL AIRPORT
SANFORD, FLORIDA
. � T
2. USE ONLY ONE STUD TYPE THROUGHOUT THE WORK, UNLESS
OTHERWISE SHOWN ON THE DRAWINGS OR SPECIFICALLY ACCEPTED IN ADVANCE BY
THE ARCHITECT.
3. PROVIDE ALL ACCESSORIES INCLUDING, BUT NOT NECESSARILY
LIMITED TO, TRACKS, SCREWS, CLIPS, ANCHORS, FASTENING DEVICES, SOUND
ATTENUATION PENCIL RODS AND RESILIENT CLIPS, AND OTHER ACCESSORIES
REQUIRED FOR A COMPLETE, PROPER, PERMANENTLY RIGID INSTALLATION, AND AS
RECOMMENDED BY THE MANUFACTURER OF THE STEEL STUDS.
4. PROVIDE A GOOD GRADE OF COMMERCIAL GROUT FOR LEVELING THE
FLOOR RUNNER MEMBER OF STEEL STUD FRAMING AS REQUIRED
12. WOOD CEILING SYSTEM: WHEN SPECIFIED SEE DRAWINGS
13. MISCELLANEOUS INCIDENTAL SUPPORT ITEMS IN TYPES, SHAPES AND
SIZES AS SHOWN AND/OR REQUIRED WITH SHOP PRIME FINISH FOR CONCEALED ITEMS
AND SCHEDULED FINISH FOR EXPOSED TO VIEW ITEMS.
'14. ALL FASTENERS, THREADED AND DRIVEN, SHALL BE THE BEST OF THEIR
RESPECTIVE TYPE, GRADE AND CLASS AND SHALL BE USED INSUFFICIENT NUMBERS
AND CORRECT SIZES FOR THEIR PARTICULAR APPLICATIONS. ALL FASTENERS ARE TO
BE CONCEALED IN THE FINISHED WORK.
15. SEALANT FOR INSTALLATION CAULKING OF ALL ARCHITECTURAL
WOODWORK ITEMS SHALL BE TREMCO, OR ARCHITECT- ACCEPTED EQUAL, HIGH
PERFORMANCE SEALANT, BLACK, AND IN TYPE AND DETAIL PER MANUFACTURER'S
WRITTEN RECOMMENDATIONS AND STANDARDS. COMPLY WITH SEALANT
MANUFACTURER'S RECOMMENDATIONS FOR SELECTION OF CAULKING MATERIALS
WHICH SUIT APPLICATIONS FOR INSTALLATION CONDITIONS.
16. ALL MISCELLANEOUS INCIDENTAL ITEMS IN TYPES SHOWN OR NOTED
ON THE DRAWINGS AND AS REQUIRED FOR FULL COMPLETION OF THE WORK.
III EXECUTION -
I. ALL FABRICATION, FINISHING, INSTALLATION, CLEANING AND
PROTECTION OF ARCHITECTURAL WOODWORK SHALL BE GOVERNED BY APPLICABLE
AW] STANDARDS. TO THE MAXIMUM EXTENT POSSIBLE, ASSEMBLE ALL ITEMS IN THE
SHOP INCLUDING INSTALLATION OF THE NON -WOODWORK COMPONENTS. NO
HORIZONTAL SEAMS OR JOINTS ARE ALLOWED IN ANY PANELS.
2. COORDINATE EXACT LOCATIONS AND SIZES OF ALL REQUIRED
CUTOUTS AND SPACE REQUIREMENT DIMENSIONS. RELOCATE ALL EXISTING WALL
MOUNTED ITEMS AND DEVICES TO REMAIN TO FACE OF NEW PANELING.
3. CONDITION WOODWORK TO AVERAGE PREVAILING HUMIDITY
CONDITIONS IN INSTALLATION AREAS PRIOR TO INSTALLING.
4. INSTALL THE WORK PLUMB, LEVEL, "TRUE AND STRAIGHT WITH NO
DISTORTIONS. SHIM AS REQUIRED USING CONCEALED SHIMS ANG/OR LEVELERS.
INSTALL TO A TOLERANCE OF '1/8" IN 8'-0" FOR PLUMB AND LEVEL (INCLUDING
COUNTERTOPS); AND WITH 1/16" MAXIMUM OFFSET IN FLUSH ADJOINING SURFACE, 1/8"
MAXIMUM OFFSET IN REVEALED ADJOINING SURFACES.
5. SCRIBE AND CUT WORK TO FIT ADJOINING WORK, AND REFINISH CUT
SURFACES OR REPAIR DAMAGED SURFACES AT CUTS.
6. ANCHOR TO BLOCKING BUILT-IN OR DIRECTLY ATTACHED TO
SUBSTRATES. SECURE TO GROUNDS, STRIPPING AND BLOCKING WITH COUNTERSUNK,
CONCEALED FASTENERS AND BLIND NAILING AS REQUIRED FOR COMPLETE
INSTALLATION. EXCEPT WHERE PRE -FINISHED MATCHING FASTENER HEADS ARE
REQUIRED, USE FINE FINISHING NAILS FOR EXPOSED NAILING, COUNTERSUNK AND
FILLED FLUSH WITH WOODWORK, AND MATCHING FINAL FINISH WHERE TRANSPARENT
FINISH IS INDICATED
7. PROPERLY APPLY SEALANT IN ACCORDANCE WITH MANUFACTURER'S
RECOMMENDED INSTALLATION PROCEDURES, MATERIALS AND DETAILS FULLY, NEATLY
AND CAREFULLY, WITHIN CONFINES OF JOINT BETWEEN ARCHITECTURAL WOODWORK
AND ABUTTING SURFACES.
8. SET ALL DOORS SQUARE, PLUMB, LEVEL AND TRUE, ALL IN
ACCORDANCE WITH THE MANUFACTURER'S WRITTEN INSTRUCTIONS. DOORS SHALL
OPERATE FREELY THROUGHOUT THEIR INTENDED PATH OF TRAVEL AND LOCK WITH
ABSOLUTE MINIMUM FREE PLAY. ENSURE PROPER MINIMUM JOINT AND ALIGNMENT
BETWEEN DOOR AND FRAME.
9. ADJUST AND CHECK EACH OPERATING ITEM OF HARDWARE AND EACH
DOOR, EXISTING TO REMAIN AND NEW TO ENSURE PROPER OPERATION OF FUNCTION
OF EVERY UNIT. REPLACE ANY UNIT WHICH CANNOT BE ADJUSTED TO OPERATE
FREELY AND SMOOTHLY AS INTENDED FOR THE APPLICATION
10. MAKE FINAL CHECK AND ADJUSTMENT OF ALL HARDWARE ITEMS.
CLEAN OPERATING ITEMS AS NECESSARY TO RESTORE PROPER FUNCTION AND FINISH
OF HARDWARE AND DOORS. ADJUST DOOR CONTROL DEVICES TO COMPENSATE FOR
FINAL OPERATION OF HEATING AND VENTILATING EQUIPMENT.
11, INSTRUCT OWNER'S PERSONNEL IN PROPER ADJUSTMENT AND
MAINTENANCE OF HARDWARE FINISHES, DURING THE FINAL ADJUSTMENT OF
HARDWARE.
12. APPLY FABRIC PANEL COVERING TO SOUND, SMOOTH, DRY AND PROPERLY
PREPARED PANEL SURFACES BY DIRECT GLUE -DOWN METHOD USING
MANUFACTURER'S RECOMMENDED ADHESIVE. ALL MATERIALS SHALL BE INSTALLED
WITH TIGHT NEAT CORNERS SECURE, SMOOTH, WITHOUT WRINKLES, GAPS OR
OVERLAPS. JOINTS ARE TO BE UN -NOTICEABLE.
13. PERFORM ALL WORK IN ACCORDANCE WITH SECTIONS 01045, 01400,
01600 AND 01710 OF THESE SPECIFICATIONS.
END OF SECTION 06400
07900 JOINT SEALERS:
2. SIDE FOLDING CLOSURE(S):
5. WIRE CLIPS: 99 SPRING STEEL.
I WORK INCLUDED -
'1. MANUALLY OPERATED, (BI -PARTING) ASSEMBLY(IES) WITH CLEAR
III EXECUTION -
ANODIZED MILL ALUMINUM FINISH / PERFORATED STEEL PANEL CURTAIN. PROVIDE
1. RELATED DOCUMENTS:
INSIDE/OUTSIDE CYLINDER LOCK WITH DUSTPROOF FLOOR STRIKE AND EGRESS
1. INSTALL ALL GYPSUM WALLBOARD WORK IN ACCORDANCE
DOORS FOR EMERGENCY EXIT.
WITH THE GYPSUM WALLBOARD MANUFACTURER'S WRITTEN TECHNICAL INFORMATION,
1. DRAWINGS AND GENERAL PROVISIONS OF THE CONTRACT, INCLUDING GENERAL
GYPSUM CONSTRUCTION HANDBOOK LATEST EDITION.
AND SUPPLEMENTARY CONDITIONS AND DIVISION 1 GENERAL REQUIREMENTS, APPLY
1. DYNAMIC CLOSURES, (800-663-4599), OR
TO THIS SECTION.
2. DYNAFLAIR, (813-248-8100), MODEL "SENTRY", OR
2. EXISTING DEMISING WALLS ARE TO BE RETROFITTED AS
3. MOBILFLEX (800-501-3539), MODEL "AEROFLEX", OR
REQUIRED TO MAINTAIN REQUIRED FIRE RATING. NEW WORK SHALL ACCOMMODATE
2. EXAMINE ALL OTHER SECTIONS OF THE SPECIFICATIONS FOR REQUIREMENTS
4. METRO DOOR, (800-669-3667) OR
EXISTING RELOCATED AND NEW BUILT-IN ELECTRICAL DEVICES: COORDINATE WITH
WHICH AFFECT" WORK OF THIS SECTION WHETHER OR NOT SUCH WORK IS
5. ARCHITECT ACCEPTED EQUAL
ELECTRICAL DRAWINGS.
SPECIFICALLY MENTIONED IN THIS SECTION.
III EXECUTION -
3. INSTALL ALL GYPSUM WALLBOARD PLUMB LEVEL, SQUARE
3. COORDINATE WORK WITH THAT OF ALL OTHER TRADES AFFECTING, OR
AND TRUE WITHOUT DISTORTION, ALIGNED AND FITTED PROPERLY, TAPED FLUSH AND
AFFECTED BY WORK OF THIS SECTION. COOPERATE WITH SUCH TRADES TO ASSURE
1. INSTALLATION SHALL BE BY CLOSURE MANUFACTURER'S
SMOOTH, ACCEPTABLE FOR APPLIED FINISHES. INSTALL METAL TRIM AND METAL TRIM
THE STEADY PROGRESS OF ALL PROJECT WORK.
AUTHORIZED DISTRIBUTOR OR REPRESENTATIVE.
ACCESSORIES AT ALL EXPOSED TO VIEW CORNERS, EXTERNAL AND INTERNAL, AND ALL
EXPOSED TO VIEW ENDS.
2. PROVIDE AND INSTALL:
2. COORDINATE EXACT LOCATIONS AND SIZES OF ALL REQUIRED
CUTOUTS, AND SPACE REQUIREMENTS AND DIMENSIONS FOR SUPPORT AND FINISH
4. COORDINATE EXACT LOCATIONS AND SIZES OF ALL REQUIRED
1. ALL CAULKING FOR THE INSTALLATION OF NEW WORK WHERE NOTED AND/OR
REQUIREMENTS WITH OTHER SECTIONS OF THESE SPECIFICATIONS AND AS SHOWN
CUTOUTS, AND SPACE REQUIREMENTS AND DIMENSIONS FOR SUPPORT AND
REQUIRED INCLUDING ALL MECHANICAL AND ELECTRICAL WORK.
AND NOTED ON THE DRAWINGS:
ENCLOSED ABUTTING MATERIAL REQUIREMENTS WITH OTHER SECTIONS OF THESE
SPECIFICATIONS AND AS SHOWN AND NOTED ON THE.DRAWINGS:
2. ALL ADHESIVES, BACK-UP MATERIALS AND INCIDENTAL MATERIALS REQUIRED
1. MISCELLANEOUS METALS SECTION 05500
FOR PROPER INSTALLATION OF THE ABOVE.
2. CARPENTRY SECTION 06100
1. MISCELLANEOUS METALS SECTION 05500
3. ARCHITECTURAL WOODWORK SECTION 06400
2. CARPENTRY SECTION 06100
3. PROVIDE MANUFACTURER'S PRODUCT DATA LITERATURE ON ALL ITEMS,
4. GYPSUM WALLBOARD SECTION 09250
3. ARCHITECTURAL WOODWORK SECTION 06400
SAMPLES OF CAULKING AND SAMPLES OF OTHER ITEMS AS MAY BE REQUESTED BY
5. ELECTRICALSEE DRAWINGS
4. MECHANICAL SEE MECHANICAL DRAWINGS
THE ARCHITECT IN ACCORDANCE WITH SECTION 01300 OF THESE SPECIFICATIONS.
5. ELECTRICAL SEE ELECTRICAL DRAWINGS
3. SET DOOR SUPPORT, ENCLOSURES AND ABUTTING ADJACENT
4. PROVIDE CLEANING DATA IN ACCORDANCE WITH SECTION 01710 OF THESE
WORK SQUARE, PLUMB, LEVEL AND TRUE, ALL IN ACCORDANCE WITH THE CLOSURE
5. PERFORM ALL WORK IN ACCORDANCE WITH SECTIONS 01045,
SPECIFICATIONS. INCLUDE RECOMMENDED CLEANING METHODS, CLEANING MATERIALS
MANUFACTURER'S WRITTEN INSTRUCTIONS. CURTAIN(S) SHALL OPERATE FREELY
01400, 01600 AND 01710 OF THESE SPECIFICATIONS.
AND STAIN REMOVAL METHODS.
THROUGHOU-T (TTS) (THEIR) INTENDED PATI-I(S) OF TRAVEL WITH ABSOLUTE MINIMUM
FREEPLAY. ENSURE PROPER MINIMUM JOINT AND ALIGNMENT BETWEEN CURTAIN
END OF SECTION 09250
5. ALL WORK SHALL BE HIGHEST IN QUALITY IN COMPLIANCE WITH SWRI,
GUIDES AND STOREFRONT ENCLOSURES.
SEALANT AND CAULKING GUIDE SPECIFICATION, IMIAC AND APPLICABLE CODE
REQUIREMENTS AND SHALL BE OF THE HIGHEST QUALITY IN MATERIAL AND
4. INSTRUCT OWNER'S PERSONNEL IN PROPER ADJUSTMENT
Q950 HARDWOOD FLOORING:
INSTALLATION STANDARDS FOR THE TYPE APPLICATION AND METHOD OF
AND MAINTENANCE OF CLOSURE(S), DURING THE FINAL ADJUSTMENT OF CLOSURE
CONSTRUCTION IN ACCORDANCE WITH THE MANUFACTURER'S WRITTEN
INSTALLATION(S).
I WORK INCLUDED -
RECOMMENDATIONS TO ACHIEVE A WATERTIGHT INSTALLATION GUARANTEE AGAINST
ALL DEFECTS IN MATERIAL AND WORKMANSHIP FOR A PERIOD OF TWO (2) YEARS.
5. PERFORM ALL WORK IN ACCORDANCE WITH SECTIONS 01045,
1. RELATED DOCUMENTS.
01400, 01600 AND 01710 OF THESE SPECIFICATIONS.'
6. WORK NOT INCLUDED:
1. DRAWINGS AND GENERAL PROVISIONS OF THE CONTRACT, INCLUDING
END OF SECTION 08300
GENERAL AND SUPPLEMENTARY CONDITIONS AND DIVISION 1, GENERAL
1. SEALANTS SPECIFIED IN OTHER SECTIONS -
REQUIREMENTS OF THESE SPECIFICATIONS, APPLY TO THIS SECTION.
1. ARCHITECTURAL WOODWORK SECTION 0(3400
2. EXAMINE ALL OTHER SECTIONS OF THE SPECIFICATIONS FOR
Q950 GYPSUM WALLBOARD:
REQUIREMENTS WHICH AFFECT WORK OF THIS SECTION WHETHER OR NOT SUCH
WORK IS SPECIFICALLY MENTIONED IN THIS SECTION.
II MATERIALS -
I WORK INCLUDED -
3. COORDINATE WORK WITH THAT OF ALL OTHER TRADES AFFECTING, OR
1. TREMCO, OR ARCHITECT ACCEPTED EQUAL, HIGH PERFORMANCE
1. RELATED DOCUMENTS:
AFFECTED BY WORK OF THIS SECTION. COOPERATE WITH SUCH TRADES TO ASSURE
SEALANTS, IN, STANDARD COLORS SELECTED BY ARCHITECT AND IN TYPE AND DETAIL
THE STEADY PROGRESS OF ALL PROJECT WORK.
PER MANUFACTURER'S WRITTEN RECOMMENDATIONS AND STANDARDS. COMPLY WITH
1. DRAWINGS AND GENERAL PROVISIONS OF THE CONTRACT, INCLUDING
SEALANT MANUFACTURER'S RECOMMENDATIONS FOR SELECTION OF CAULKING
GENERAL AND SUPPLEMENTARY CONDITIONS AND DIVISION 1 GENERAL
2. PROVIDE AND INSTALL:
MATERIALS WHICH SUIT APPLICATIONS FOR INSTALLATION CONDITIONS.
REQUIREMENTS, APPLY TO THIS SECTION.
1. ALL HARDWOOD STRIP FLOORING AS SHOWN AND SCHEDULED ON THE
2. INCIDENTAL MATERIALS INCLUDING BUT NOT LIMITED TO BACK-UP
2. EXAMINE ALL OTHER SECTIONS OF THE SPECIFICATIONS FOR
DRAWINGS.
MATERIALS, ADHESIVES, BOND BREAKERS, TAPE, PRIMERS AND FASTENERS REQUIRED
REQUIREMENTS WHICH AFFECT WORK OF THIS SECTION WHETHER OR NOT SUCH
AND COMPATIBLE AND IN ACCORDANCE WITH MATERIAL MANUFACTURER'S
WORK IS SPECIFICALLY MENTIONED IN THIS SECTION.
2. TRANSITION STRIPS AS SHOWN ON THE DRAWINGS.
RECOMMENDATIONS.
3. COORDINATE WORK WITH THAT OF ALL OTHER TRADES AFFECTING, OR
3. ALL SETTING MATERIALS AND INSTALLATION PRODUCTS FOR ABOVE
III EXECUTION -
AFFECTED BY WORK OF THIS SECTION. COOPERATE WITH SUCH TRADES TO ASSURE
HARDWOOD STRIP FLOORING AND TRANSITION STRIPS.
THE STEADY PROGRESS OF ALL PROJECT WORK.
1. PROPERLY PREPARE AND CLEAN ALL EXISTING AND NEW SURFACES TO
3. SUBMITTALS:
RECEIVE APPLIED MATERIALS AND VERIFY THAT ALL SURFACES TO RECEIVE
2. PROVIDE AND INSTALL:
MATERIALS ARE PROPERLY PREPARED AND READY IN ACCORDANCE WITH MATERIAL
1. PROVIDE SAMPLES OF STRIP FLOORING, SHOP DRAWINGS ON
MANUFACTURER'S WRITTEN INSTRUCTIONS.
'1. GYPSUM WALLBOARD PARTITION TYPES, CEILINGS, FSACIA/SOFFITS,
TERMINATION DETAILS AND MANUFACTURER'S PRODUCT DATA LITERATURE IN
ARCHITECTURAL WOODWORK BACK-UP ASSEMBLIES, PARTITION RETROFITS, FURRING
ACCORDANCE WITH SECTION 01300 OF THESE SPECIFICATIONS.
2. PROPERLY APPLY ALL MATERIALS TO ALL SURFACES IN ACCORDANCE WITH
AND PATCHING THROUGHOUT AS SHOWN AND SCHEDULED ON THE DRAWINGS.
MANUFACTURER'S RECOMMENDED INSTALLATION PROCEDURES, MATERIALS AND
2. INSTALLER CERTIFICATION: SUBMIT A LIST OF AT LEAST THREE INSTALLATIONS
DETAILS.
3. PROVIDE MANUFACTURER'S LITERATURE IN ACCORDANCE
SUCCESSFULLY COMPLETED WITHIN THE PAST YEAR REQUIRING THE SAME GENERAL
WITH SECTION 01300 OF THESE SPECIFICATIONS.
DEGREE OF INSTALLATION EXPERTISE.
3. APPLY SEALANTS FULL AND CONTINUOUS NEATLY AND CAREFULLY, WITHIN
CONFINES OF JOINT, WITH CONCAVE PROFILES, AT ALL JOINTS INDICATED ANG/OR
4. PROVIDE CLEANING DATA IN ACCORDANCE WITH SECTION
3. SUBMIT MAINTENANCE DATA IN ACCORDANCE WITH SECTION 01710 OF
REQUIRED.
01710 AND OF THESE SPECIFICATIONS. INCLUDE RECOMMENDED CLEANING METHODS,
THESE SPECIFICATIONS. INCLUDE RECOMMENDED CLEANING METHODS, CLEANING
CLEANING MATERIALS, STAIN REMOVAL METHODS.
MATERIALS, STAIN REMOVAL METHODS, AND POLISHES AND WAXES,
END OF SECTION 07900
5. ALL WORK SHALL BE HIGHEST IN QUALITY IN COMPLIANCE
4. QUALITY ASSURANCE:
WITH MANUFACTURER'S INSTRUCTIONS AND APPLICABLE CODE REQUIREMENTS.
1. ALL WORK AND MATERIALS SHALL BE HIGHEST QUALITY IN ACCORDANCE
083.00 SPECIAL DOORS _
II MATERIALS -
WITH THE LATEST RECOMMENDATIONS, STANDARDS AND REQUIREMENTS OF THE
STRIP FLOORING MANUFACTURER'S WRITTEN TECHNICAL INFORMATION, TILE COUNCIL
I WORK INCLUDED -
1. ALL GYPSUM WALLBOARD MATERIALS INCLUDING BUT NOT
OF AMERICA CONSTRUCTION HANDBOOK, AND CODE ASSEMBLY REQUIREMENTS AND
LIMITED TO: STEEL STUD FRAMING COMPONENTS, REGULAR BOARD, FIRECODE C TYPE
ASTM AND NOFMA STANDARDS.
1. RELATED DOCUMENTS:
X FIRE RATED BOARD, SOUND INSULATION AND SEALANT, ADHESIVES, METAL TRIM,
METAL TRIM ACCESSORIES, CORNER TRIM, TAPE, JOINTING COMPOUND AND
2. MANUFACTURER: COMPANY SPECIALIZING IN THE PRODUCTION OF ENGINEERED
1. DRAWINGS AND GENERAL PROVISIONS OF THE CONTRACT, INCLUDING GENERAL
MISCELLANEOUS INCIDENTAL MATERIALS REQUIRED FOR THE NEW WORK AND
MULTIPLY CONSTRUCTIN BONDED HARDWOOD FLOORING WITH A MINIMUM FIVE YEARS
AND SUPPLEMENTARY CONDITIONS AND DIVISION 1 GENERAL REQUIREMENTS, APPLY
PATCHING OF EXISTING SHALL BE U.S. GYPSUM QUALITY OR ARCHITECT ACCEPTED
DOCUMENTED EXPERIENCE.
TO THIS SECTION.
EQUAL:
3. INSTALLER: SPECIALIZING IN PERFORMING THE WORK OF THIS SECTION
2. EXAMINE ALL OTHER SECTIONS OF THE SPECIFICATIONS FOR REQUIREMENTS
1, PROVIDE STANDARD PUNCHED STEEL STUDS AND TRACK OF THE SIZES
WITH A MINIMUM FIVE YEARS DOCUMENTED EXPERIENCE AND APPROVED BY THE
WHICH AFFECT WORK OF THIS SECTION WHETHER OR NOT SUCH WORK IS
AND SHAPES SHOWN ON THE DRAWINGS, EITHER ELECTROLYTIC ZINC COATING (ASTM
MANUFACTURER.
SPECIFICALLY MENTIONED IN THIS SECTION.
DESIGNATION A 591, CLASS B) OR PAINTED WITH -1.0 MIL DRY FILM THICKNESS)
RUST -INHIBITIVE ZINC CHROMATE PRIMER PAINT, AT MANUFACTURERS OPTION. ALL
II MATERIALS -
3. COORDINATE WORK WITH THAT OF ALL OTHER TRADES AFFECTING, OR
INTERIOR METAL STUDS, AND THEIR ATTENDANT TRACK, OVER 12'-0" IN HEIGHT SHALL
AFFECTED BY WORK OFT HIS SECTION. COOPERATE WITH SUCH TRADES TO ASSURE
BE 20 GAUGE.
1. WOOD FLOORING:
THE STEADY PROGRESS OF ALL PROJECT WORK.
2. USE ONLY ONE TYPE THROUGHOUT THE WORK, UNLESS OTHERWISE
1. SEE FINISH SCHEDULE
2. PROVIDE AND INSTALL:
SHOWN ON THE DRAWINGS OR SPECIFICALLY ACCEPTED IN ADVANCE BY THE
ARCHITECT.
2. EXTRA MATERIALS:
1. SIDE FOLDING CLOSURE OR MOTOR OPERATED OVERHEAD ROLLING CLOSURE
ASSEMBLY(IES) AS SHOWN AND SCHEDULED ON THE DRAWINGS, INCLUDING
3. PROVIDE ALL ACCESSORIES INCLUDING, BUT NOT NECESSARILY LIMITED
1. PROVIDE 6 SQ. YD. OF EXTRA FLOORING MATERIAL.
ASSOCIATED ELECTRICAL WORK, HOOK-UP AND TESTING, OF ROLLING CLOSURE(S),
TO, TRACKS, SCREWS, CLIPS, ANCHORS, FASTENING, DEVICES, SOUND ATTENUATION
SEE'E' DRAWINGS
PENCIL RODS AND RESILIENT CLIPS, AND OTHER ACCESSORIES REQUIRED FOR A
2. TRANSITION STRIPS:
COMPLETE AND PROPER INSTALLATION, AND AS RECOMMENDED BY THE
3. COORDINATE ALL WORK OF OTHER SECTIONS FOR THE CLOSURES.
MANUFACTURER OF THE STEEL STUDS.
1. AIRPORT STANDARD TRANSITION STRIP
4. PROVIDE COORDINATED SHOP DRAWING FOR CLOSURE REQUIREMENTS,
4. PROVIDE A GOOD GRADE OF COMMERCIAL GROUT FOR LEVELING THE
INCLUDING BUT NOT NECESSARILY LIMITED TO; SUPPORT FRAMING AND ENCLOSURES,
FLOOR RUNNER MEMBER OF STEEL STUD PARTITIONS AS REQUIRED
III EXECUTION -
PER CLOSURE MANUFACTURER'S LITERATURE IN ACCORDANCE WITH SECTION 01300
OF THESE SPECIFICATIONS.
2. SUSPENSION SYSTEM MATERIALS:
1. EXAMINATION:
5. PROVIDE CLEANING AND MAINTENANCE DATA IN ACCORDANCE WITH
1. BOLT 3 X 3 X 1/4 X 2 LONG SUPPORT ANGLES TO EXISTING STRUCTURAL
1. VERIFY THAT CEMENTITIGUS UNDERLAYMENT, SEE SECTION 03500, IS
SECTIONS 01710 AND 01 730 OF THESE SPECIFICATIONS. INCLUDE RECOMMENDED
CONCRETE OR SUPPLEMENT EXISTING INTERMEDIATE FRAMING MEMBERS AS
PROPERLY INSTALLED AND IS COMPATIBLE WITH WOOD FLOORING ADHESIVE TO BE
CLEANING METHODS, CLEANING MATERIALS, STAIN REMOVAL METHODS.
REQUIRED FOR NEW SUSPENSION SYSTEM WITH UNISTRUT CHANNELS
AND IS CLEAN AND FREE OF ALL LAITANCE, LOOSE MATERIALS, GREASE, OIL, AND
SCREW FASTENED TO EXISTING STRUCTURAL STEEL MEMBERS SPACED 4 FOOT 0
OTHER CONTAMINANTS THAT WILL INTERFERE WITH THE BONDING OF THE ADHESIVE IN
6. ALL WORK SHALL BE HIGHEST IN QUALITY IN COMPLIANCE WITH
INCHES ON CENTER BETWEEN EXISTING STRUCTURAL MEMBERS.
ACCORDANCE WITH THE FLOORING MANUFACTURER'S WRITTEN TECHNICAL
MANUFACTURER'S WRITTEN INSTRUCTIONS AND APPLICABLE CODE REQUIREMENTS.
INFORMATION AND APPLICABLE ASTM STANDARDS.
2. SECURE TO SUPPORT ANGLES OR INTERMEDIATE FRAMING MEMBERS BY
TIEING GUY WIRES OR INSERTING BENT END OF HANGER RODS THROUGH
PRE -PUNCHED HOLES (4'-0" ON CENTERS IN INTERMEDIATE FRAMING MEMBERS) SIZED
II MATERIALS -
FOR NOT LESS THAN 3 TIMES THE HANGER DESIGN LOAD FOR THE STRUCTURAL
CLASSIFICATION INDICATED; ASTM DESIGNATION C 635, TABLE 1, INDIRECT HUNG.
1. OVERHEAD ROLLING CLOSURE(S):
3. CEILING ATTACHMENT TO BUILDING SYSTEM SHALL BE THROUGH HANGER
1. MOTOR OPERATED, COUNTERBALANCE ASSEMBLY(IES) WITH CLEAR ANODIZED
RODS, GUY WIRES, UNISTRUT AND STEEL CHANNELS AS SHOWN ON THE DRAWINGS:
ALUMINUM (MT_) FINISH / PERFORATED PANEL CURTAIN. PROVIDE OUTSIDE/INSIDE KEY
SWITCHES, ELECTRIC INTERLOCKS, ELECTRO MAGNETIC BRAKE, INSIDE EMERGENCY
1. HANGERS SHALL BE 1/4 INCH DIAMETER STEEL RODS. HANGER RODS SHALL BE
RELEASE SYSTEM AND 4" WIDE BOTTOM RAIL CLOSURE PLATE WITH PAINTED (P_)
GALVANIZED CONFORMING TO APPLICABLE PROVISIONS OF ASTM DESIGNATION A 123.
FINISH, PER SECTION 09900,,BY:
2. GUY WIRES SHALL BE 12 GAUGE WIRE.
1. DYNAMIC CLOSURES, (800-663-4599), MODEL "PARAVENT", OR
2. DYNAFLAIR, (813-248-8100), OR
3. UNISTRUT SHALL- BE P-1001 WITH BEAM CLAMPS AND ANGLE FITTINGS.
3. METRO DOOR, (800-669-3667) OR
4. ARCHITECT ACCEPTED EQUAL
4. STEEL CHANNELS: EITHER COLD ROLLED AT 0.475 LB, PER FT. OR HOT -ROLLED FOR
SUPPORT OF CEILING RUNNERS WITH DEFLECTIONS LESS THAN 1/360 X SPANS; BUT IN
NO CASE LESS THAN 1-1/2 INCH SECTION WEIGHING 0.475 POUNDS PER LINEAR FOOT,
AND IN NO CASE LESS THAN REQUIRED BY GOVERNING REGULATIONS OR FOR FIRE
RESISTANCE.
THIS DRAWING AS AN INSTRUMENT
OF SERVICE, IS AND SHALL REMAIN
THE PROPERTY OF ARCHITECT.
USE OF THE DRAWING, OR ANY
REPRODUCTION THERE OF, WITHOUT
THE EXPRESS WRITTEN PERMISSION
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION IN DEROGATION OF THIS
ARCHITECTS RIGHTS.
COPYRIGHT 2008
NO. DATE REVISION
2. VERIFY THAT UNDERLAYMENT IS AT HEIGHT AND LEVEL TO MAKE WOOD
FLOORING FLUSH, EVEN AND CONTINUOUS WITH ABUTTING FLOORING AND TRANSITION
STRIPS AS DETAILED.
2. INSTALLATION:
1. INSTALL WOOD FLOORING WORK IN ACCORDANCE WITH THE FLOORING
MANUFACTURER'S WRITTEN TECHNICAL INFORMATION FOR DIRECT -BOND
INSTALLATION AND APPLICABLE ASTM STANDARDS.
1. INSTALL TRANSITION STRIPS AS REQUIRED FOR A CONTINUOUS SMOOTH,
SOUND, LEVEL, AND FLUSH INSTALLATION WITH A MINIMUM NUMBER OF TIGHT HAIRLINE
BUTT JOINTS, FLUSH AND LEVEL TO ABUTTING HARDWOOD FLOORING AND ABUTTING
EXITING FINISH FLOOR SURFACES AS' SHOWN AND DETAILED.
2. LAY FLOORING AS INDICATED ON THE DRAWINGS. ARRANGE FLOORING
WITH END MATCHED GRAIN SET FLUSH AND TIGHT. TOOTH IN ALL FLOORING
DIRECTIONAL CHANGES. VERIFY ALIGNMENT AS WORK PROGRESSES.
3. COORDINATE INSTALLATION WITH THE WORK OF ALL OTHER SECTIONS OF THESE
SPECIFICATIONS.
4. CLEAN AND PROTECT FINISHED FLOOR SURFACES IN ACCORDANCE WITH
MANUFACTURER'S WRITTEN INSTRUCTIONS.
3. PERFORM ALL WORK IN ACCORDANCE WITH SECTIONS 01045,
01400, 01600 AND 01710 IN DIVISION 1 OF THESE SPECIFICATIONS. DO NOT PERMIT
TRAFFIC OVER FINISHED FLOOR SURFACE FOR 4 DAYS AFTER INSTALLATION.
END OF SECTION 09550
0.9�OQ ACOUSTICAL TREATMENT;
I WORK INCLUDED -
1. RELATED DOCUMENTS:
1. DRAWINGS AND GENERAL PROVISIONS OF THE CONTRACT, INCLUDING
GENERAL AND SUPPLEMENTARY CONDITIONS AND DIVISION 1 GENERAL
REQUIREMENTS, APPLY TO THIS SECTION.
2. EXAMINE ALL OTHER SECTIONS OF THE SPECIFICATIONS FOR
REQUIREMENTS WHICH AFFECT WORK OF THIS SECTION WHETHER OR NOT SUCH
WORK IS SPECIFICALLY MENTIONED IN THIS SECTION.
3. COORDINATE WORK WITH THAT OF ALL OTHER TRADES AFFECTING, OR
AFFECTED BY WORK OF THIS SECTION. COOPERATE WITH SUCH TRADES TO ASSURE
THE STEADY PROGRESS OF ALL PROJECT WORK.
2. PROVIDE AND INSTALL:
1. SUSPENDED ACOUSTICAL PANEL CEILING(S) AND GRID SYSTEM(S) AS
SCHEDULED AND SHOWN ON THE DRAWINGS.
3. COORDINATE ALL CUTOUTS AND BUILT-IN REQUIREMENTS OF
PERTINENT SECTIONS OF THESE SPECIFICATIONS OF THESE SPECIFICATIONS,
INCLUDING MECHANICAL AND ELECTRICAL WORK: SEE MECHANICAL AND ELECTRICAL
DRAWINGS.
4. COORDINATE ALL SUSPENDED ENCLOSURES, SIGNAGE AND
ABUTTING WALL AND FASCIA CONDITIONS, NEW AND EXISTING, DESCRIBED IN
PERTINENT SECTIONS OF THESE SPECIFICATIONS.
5. PROVIDE FINISH SAMPLES AND MANUFACTURER'S LITERATURE .
ON ALL ITEMS IN ACCORDANCE WITH SECTION 01300 OF THESE SPECIFICATIONS.
6. SUBMIT CLEANING DATA IN ACCORDANCE WITH SECTION 01710
OF THESE SPECIFICATIONS. INCLUDE RECOMMENDED CLEANING METHODS, CLEANING
MATERIALS AND STAIN REMOVAL METHODS.
7. ALL WORK SHALL BE HIGHEST IN QUALITY IN COMPLIANCE
WITH CISCA WRITTEN INSTRUCTIONS AND APPLICABLE CODE REQUIREMENTS.
II MATERIALS -
1. INTERIOR SUSPENDED ACOUSTICAL CEILING PANELS AND
GRID TO FIT CEILING AREAS AND CONDITIONS AS INDICATED ON FINISH SCHEDULE ON
DRAWINGS.
2. ALL CEILING JOISTS, SUPPORT ANGLES, FIANGER RODS,
STRUTS, GUY WIRE, CLIPS, BLACK IRON, FASTENERS, ATTACHMENTS, WALL MOLDING
AND MISCELLANEOUS INCIDENTAL MATERIALS REQUIRED FOR THE INSTALLATION OF
THE ABOVE ITEMS APPROVED BY THE CEILING MANUFACTURER AND IN ACCORDANCE
WITH ALL APPLICABLE BUILDING CODES.
EXECUTION -
1. INSTALL ALL CEILING JOISTS, BLACK IRON, HANGER RODS,
STRUTS, GUY WIRE, CLIPS, BLACK IRON, FASTENERS, ATTACHMENTS, WALL MOLDING
AND MISCELLANEOUS INCIDENTAL MATERIALS IN ACCORDANCE WITH THE STANDARD
BUILDING CODE REQUIREMENTS TO RECEIVE THE SUSPENDED ACOUSTICAL PANEL
CEILING GRIDS.
2. INSTALL ALL CEILING PANELS AND GRIDS LEVEL AND TRUE'TO
SUSPENSION SYSTEM TO FIT CEILING AREAS AS SHOWN AND IN ACCORDANCE WITH
THE CEILING MANUFACTURER'S WRITTEN INSTRUCTIONS. COORDINATE WITH NEW
DUCTWORK CONDITIONS, DIFFUSERS, RETURNS, LIGHTING FIXTURES, SPEAKERS AND
SIGNAGE. INSTALL CEILING GRID TO THE SUSPENSION GRID WITH START POINTS AS
SHOWN AT CEILING HEIGHTS INDICATED. ANY DEVIATIONS SHALL BE BROUGHT TO THE
ARCHITECT'S ATTENTION IMMEDIATELY. CAREFULLY CUT, SUPPORT AND INSTALL ALL
PERIMETER PANELS WITH WALL MOLDING. FINISH ALL EXPOSED TO VIEW CUT PANEL
EDGES TO MATCH UNCUT PANEL FINISHED EDGE,
3. PERFORM ALL WORK IN ACCORDANCE WITH SECTIONS 01045,
Q1400,01600 AND 01710 OF THESE SPECIFICATIONS.
END OF SECTION 09500
09900 PAINTING:
I WORK INCLUDED -
1. RELATED DOCUMENTS:
1. DRAWINGS AND GENERAL PROVISIONS OF THE CONTRACT, INCLUDING
GENERAL AND SUPPLEMENTARY CONDITIONS AND DIVISION 1 GENERAL
REQUIREMENTS, APPLY TO THIS SECTION.
2. EXAMINE ALL OTHER SECTIONS OF THE SPECIFICATIONS FOR
REQUIREMENTS WHICH AFFECT WORK OF THIS SECTION WHETHER OR NOT SUCH
WORK IS SPECIFICALLY MENTIONED IN THIS SECTION.
3. COORDINATE WORK WITH THAT OF ALL OTHER TRADES AFFECTING, OR
AFFECTED BY WORK OF THIS SECTION. COOPERATE WITH SUCH TRADES TO ASSURE
THE STEADY PROGRESS OF ALL PROJECT WORK.
2. PROVIDE AND INSTALL:
1. PROPERLY PREPARE, PRIME AND FINISH PAINT ALL GYPSUM WALLBOARD
WALL, CEILING AND SOFFIT/FASCIA SURFACES AS SCHEDULED AND SHOWN ON THE
DRAWINGS.
2. PROPERLY PREPARE AND FINISH PAINT ALL MISCELLANEOUS INCIDENTAL
(MATERIALS AS NOTED ON THE DRAWINGS INCLUDING BUT NOT LIMITED TO; DIFFUSERS,
REGISTERS, PIPING, CONDUIT, BOXES, LIGHTING FIXTURES, PANELBOARDS, ETC.
EXPOSED TO VIEW.
3. PROPERLY PREPARE AND FINISH PAINT EXISTING DAMAGED, MARRED OR
WORN SURFACES TO REMAIN AND PATCH TO MATCH WORK AS REQUIRED FOR THE
INSTALLATION OF NEW WORK, INCLUDING MECHANICAL AND ELECTRICAL.
3. PROVIDE FINISH SAMPLES OF EACH TYPE COLOR AND ON-SITE SAMPLE
AREAS FOR REVIEW ACCEPTANCE BY THE ARCHITECT AS NOTED IN THIS
SPECIFICATION IN ACCORDANCE WITH SECTION 01300 OF THESE SPECIFICATIONS.
1. (4) 12 X 12 OR (4) 8 X 10 FINISH SAMPLES.
4. PROVIDE CLEANING DATA IN ACCORDANCE WITH SECTION 01710 AND OF
THESE SPECIFICATIONS. INCLUDE RECOMMENDED CLEANING METHODS, CLEANING
MATERIALS, STAIN REMOVAL METHODS.
5. ALL WORK SHALL BE HIGHEST IN QUALITY IN COMPLIANCE WITH
MANUFACTURER'S WRIT'T'EN SPECIFICATIONS AND APPLICABLE CODE REQUIREMENTS.
6. WORK NOT INCLUDED:
1. UNLESS OTHERWISE INDICATED, PAINTING IS NOT REQUIRED ON SURFACES
IN CONCEALED AREAS AND INACCESSIBLE AREAS SUCH AS FURRED SPACES,
FOUNDATIONS SPACES, UTILITY -FUNNELS, PIPE SPACES, AND DUCT SHAFTS.
2. METAL SURFACES OF ANODIZED ALUMINUM, STAINLESS STEEL, CHRQM:'JM
PLATE, COPPER, BAKED ENAMEL, BRONZE, AND SIMILAR FINISHED MATERIALS WILL NOT
REQUIRE PAINTING UNDER THIS SECTION EXCEPT AS MAY BE SO SPECIFIED.
3. DO NOT PAINT MOVING PARTS OF OPERATING UNITS, MECHANICAL OR
ELECTRICAL PARTS SUCH AS VALVE OPERATORS, LINKAGE, SENSING DEVICES, AND
MOTOR SHAFTS, UNLESS OTHERWISE INDICATED.
4. DO NOT PAINT OVER REQUIRED LABELS OR EQUIPMENT IDENTIFICATION,.
PERFORMANCE RATING, NAME, OR NOMENCLATURE PLATES. DO NOT PAINT FINISH
HARDWARE UNLESS PRIME COATED.
5. PAINTING SPECIFIED IN OTHER SECTIONS OF THESE SPECIFICATIONS:
1. SECTION 06400 ARCHITECTURAL WOODWORK
2. SECTION 10400 IDENTIFYING DEVICES
MATERIALS
1. PAINT TYPES: SEE FINISH SCEDULE ON DRAWINGS
2. PRIMERS FOR THE ABOVE PAINT TYPES AS MANUFACTURED BY THE PAINT
TYPE MANUFACTURER FOR SUBSTRATE TO BE PAINTED.
3. HEALTH SPEC LOW ODOR, LOW VOLATILE ORGANIC COMPOUNDS (VOC)
COMPLIANT MATERIALS ARE ONLY TO BE USED. DO NOT THIN ALKYD BASED MATERIALS
OTHERWISE VOC RATING WILL BE COMPROMISED. VOC PAINTS REQUIRE LONGER
DRYING TIME.
4. UPON COMPLETION OF THE WORK OF THIS SECTION, DELIVER TO THE
OWNER AND EXTRA STOCK EQUALING 10% EACH COLOR, TYPE AND CLASS OF PAINT
USED IN THE WORK, TIGHTLY SEALING EACH CONTAINER, AND CLEARLY LABELING
EACH CAN WITH CONTENTS AND LOCATION WHERE USED.
EXECUTION -
1. EXAMINE SURFACES TO BE PAINTED AND REPORT ANY CONDITIONS THAT
WOULD ADVERSELY AFFECT THE APPEARANCE OR PERFORMANCE OF THE PAINTING
SYSTEMS.
2. PROPERLY PREPARE, CLEAN AND PRIME ALL EXISTING AND NEW SURFACE
SUBSTRATES TO RECEIVE PAINTING SYSTEMS IN ACCORDANCE WITH THE MATERIAL
MANUFACTURER'S SPECIFICATIONS. PATCH, REPAIR AND FILL FLUSH ALL DAMAGE,
DEFECTS, AND OTHER MARRINGS TO EXISTING AND NEW SURFACES TO BE PAINTED.
3. REMOVE ELECTRICAL PLATES, HARDWARE, LIGHT FIXTURE TRIM, SIGNS,
ESCUTCHEONS AND FITTINGS PRIOR TO PREPARING SURFACES OR FINISHING. SIGNS
ARE TO BE REPLACED IN LOCATIONS AS DIRECTED BY OWNER AFTER PAINT FINISH
ACCEPTANCE. MASK OFF ALL MECHANICAL AND ELECTRICAL OPERATING DEVICES AND
IDENTIFICATION MARKINGS, FIRE PROTECTION SPECIALTIES, DOORS, FRAMES AND
HARDWARE AND OTHER MISCELLANEOUS ITEMS AS REQUIRED AND ALL ABUTTING
SURFACES SCHEDULED OR NOTED TO RECEIVE A DIFFERENT PAINT TYPE OR FINISH.
4. APPLY PAINT COATS BY SPRAY, ROLLER AND BRUSH APPLICATION ONLY TO
SOUND, SMOOTH, DRY AND PROPERLY PREPARED SURFACES IN A DUST FREE
ENVIRONMENT IN ACCORDANCE WITH THE PAINT MANUFACTURER'S WRITTEN
INSTRUCTIONS. FILL ALL DAMAGED, MARRED, SCRAPED AND DENTED SURFACES WITH
APPROPRIATE FILLER MATERIAL, METAL OR WOOD, AND SAND/POLISH SMOOTH AND
SMOOTH WITH ABUTTING SURFACES. ALL WORK SHALL RECEIVE ONE PRIME COAT AND
TWO FINISH COATS. ALL COMPLETED WORK SHALL BE UNIFORM IN APPEARANCE Al D
COVERAGE, FREE OF HOLIDAYS, SPOTTING, LAPS, TOOL MARKS, RUNS, SAGS, OR
OTHER SURFACE IMPERFECTIONS.
1. EXCEPT AS SPECIFICALLY OTHERWISE ACCEPTED BY THE ARCHITECT, CONFINE
SPRAY APPLICATION TO TVIETAL FRAMEWORK AND SIMILAR SURFACE WHERE HAND
BRUSH WORK WOULD BE INFERIOR.
5. MISCELLANEOUS SURFACES AND PROCEDURES
1. PAINT ALL DAMAGED EXISTING PAINT SURFACES COLOR AND FINISH TO MATCH
EXISTING LIKE FINISHED SURFACE.
2. HARDWARE: PAINT PRIME COATED HARDWARE TO MATCH ADJACENT SURFACES.
3. ALUMINUM SURFACES SCHEDULED FOR PAINT FINISH: REMOVE SURFACE
CONTAMINATION BY STEAM OR HIGH PRESSURE WATER. REMOVE OXIDATION WITH
ACID ETCH AND SOLVENT WASHING. APPLY ETCHING PRIMER IMMEDIATELY FOLLOWING
CLEANING.
4. SEAL WITH SHELLAC AND SEAL ALL MARKS WHICH MAY BLEED THROUGH
SURFACE FINISHES.
6. PERFORM ALL WORK IN ACCORDANCE WITH SECTIONS 01045, 01400, 01600
AND 01710 OF THESE SPECIFICATIONS. .
END OF SECTION 09900
1040 IDENTIFYING D �CICE%
I WORK INCLUDED -
1. RELATED DOCUMENTS:
1. DRAWINGS AND GENERAL PROVISIONS OF THE CONTRACT, INCLUDING GENERAL
AND SUPPLEMENTARY CONDITIONS AND DIVISION 1 GENERAL REQUIREMENTS, APPLY
TO THIS SECTION.
2. EXAMINE ALL OTHER SECTIONS OF THE SPECIFICATIONS FOR REQUIREMENTS
WHICH AFFECT WORK OF THIS SECTION WHETHER OR NOT SUCH WORK IS
SPECIFICALLY MENTIONED IN THIS SECTION.
3. COORDINATE WORK WITH THAT OF ALL OTHER TRADES AFFECTING, OR
AFFECTED BY WORK OF THIS SECTION. COOPERATE WITH SUCH TRADES TO ASSURE
THE STEADY PROGRESS OF ALL PROJECT WORK.
2. PROVIDE AND INSTALL:
1. SIGN(S) AS SCHEDULED AND SHOWN ON THE DRAWINGS.
2. ALL MOUNTING DEVICES AND FASTENERS REQUIRED FOR THE
INSTALLATION OF THE ABOVE SIGN AND MAP ASSEMBLIES.
3. PROVIDE COORDINATED SHOP DRAWINGS AND MANUFACTURER'S
LITERATURE ON ALL ITEMS IN ACCORDANCE WITH THESE SPECIFICATIONS.
4. PROVIDE CLEANING DATA IN ACCORDANCE WITH SECTION 0.1710 AND 0 �
THESE SPECIFICATIONS. INCLUDE RECOMMENDED CLEANING METHODS, CLEANING
MATERIALS, STAIN REMOVAL METHODS.
5. ALL WORK SHALL BE HIGHEST IN QUALITY IN COMPLIANCE WITH
MANUFACTURER'S WRITTEN INSTRUCTIONS AND APPLICABLE CODE REQUIREMENTS.
Hudson News - Hudson BookseHers
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
TERMINAL A -INTERNATIONAL DEPARTURES- UPPER LEVEL
ORLANDO SANFORD
INTERNATIONAL AIRPORT
SANFORD, FLORIDA
II MATERIALS
1. STOREFRONT FASCIA SIGN:
1. SIGN AS INDICATED ON DRAWINGS AND ARCHITECT APPROVED SIGN
DRAWINGS.
III EXECUTION -
1. COORDINATE EXACT LOCATIONS AND SIZES OF ALL REQUIRED
CUTOUTS AND SPACE REQUIREMENTS AND DIMENSIONS WITH OTHER SECTIONS OF
THESE SPECIFICATIONS AND AS NOTED ON THE DRAWINGS:
1. SECTION 06400 ARCHITECTURAL WOODWORK
2. SECTION 092.50 GYPSUM WALLBOARD
2. 'E' DRAWINGS ELEC"T"RICAL
2. . INSTALL ALL WORK TRUE PLUMB, RIGID AND PERMANENT IN
ACCORDANCE WITH MANUFACTURER'S WRITTEN INSTRUCTIONS.
3. PERFORM ALL WORK IN ACCORDANCE WITH SECTIONS 01045, 01400,
01600 AND 01710 OF THESE SPECIFICATIONS.
END OF SECTION 10400
1144 APPS_ LANCES:
I WORK INCLUDED -
1. RELATED DOCUMENTS:
1. DRAWINGS AND GENERAL PROVISIONS OF THE CONTRACT, INCLUDING
GENERAL AND SUPPLEMENTARY CONDITIONS AND DIVISION 1 GENERAL
REQUIREMENTS, APPLY TO THIS SECTION.
2. EXAMINE ALL OTHER SECTIONS OF THE SPECIFICATIONS FOR REQUIREMENTS
WHICH AFFECT WORK OF THIS SECTION WHETHER OR NOT SUCH WORK IS
SPECIFICALLY MENTIONED IN THIS SECTION.
3. COORDINATE WORK WITH THAT OF ALL OTHER TRADES AFFECTING, OR
AFFECTED BY WORK OF THIS SECTION. COOPERATE WITH SUCH TRADES TO ASSURE
THE STEADY PROGRESS OF ALL PROJECT WORK.
2. INSTALL ONLY: OWNER SUPPLIED CONTRACTOR INSTALLED (OSCI)
1. REFRIGERATOR(S) AS SHOWN ON THE DRAWINGS.
3. PROVIDE AND INSTALL:
1. POWER REQUIREMENTS, SEE ELECTRICAL DRAWINGS
4. ALL WORK SHALL BE HIGHEST IN QUALITY IN COMPLIANCE WITH
MANUFACTURER'S WRITTEN INSTRUCTIONS AND APPLICABLE CODE REQUIREMENTS.
II MATERIALS -.
1. EQUIPMENT AS SHOWN ON DRAWINGS - (USCI).
III EXECUTION -
1. COORDINATE EXACT LOCATIONS, SIZE AND SPACE REQUIREMENT
DIMENSIONS WITH OTHER SECTIONS OF THESE SPECIFICATIONS AND AS NOTED ON
THE DRAWINGS:
1. ARCHITECTURAL WOODWORK SECTION 06400
2. ELECTRICAL SEE'E' DRAWINGS
2. INSTALL REFRIGERATOR(S) LEVEL, TRUE AND PLUMB IN ACCORDANCE
WITH MANUFACTURER'S WRITTEN INSTRUCTIONS.
3. CLEAN AND PROTECT REFRIGERATOR(S) IN ACCORDANCE WITH
SECTIONS 01600 AND 01710 OF THESE SPECIFICATIONS.
END OF SECTION 11450
126-70 RUGS AICD MATS
I WORK INCLUDED -
1. RELATED DOCUMENTS:
1. DRAWINGS AND GENERAL PROVISIONS OF THE CONTRACT, INCLUDING
GENERAL AND SUPPLEMENTARY CONDITIONS AND DIVISION 1 GENERAL
REQUIREMENTS, APPLY TO THIS SECTION.
2. EXAMINE ALL OTHER SECTIONS OF THE SPECIFICATIONS FOR REQUIREMENTS
WHICH AFFECT WORK OF THIS SECTION. WHETHER OR NOT SUCH WORK IS
SPECIFICALLY MENTIONED IN THIS SECTION.
3. COORDINATE WORK WITH THAT OF ALL OTHER TRADES AFFECTING, OR
AFFECTED BY WORK OF THIS SECTION. COOPERATE WITH SUCH TRADES TO ASSURE
THE STEADY PROGRESS OF ALL PROJECT WORK.
2. PROVIDE AND INSTALL:
1. ANTI -FATIGUE MAT(S) AT CASHWRAP(S) AS SHOWN ON THE DRAWINGS.
3. ALL SETTING MATERIALS AND ADHESIVES REQUIRED FOR THE
INSTALLATION OF THE ABOVE.
4. PROVIDE MAT JOINT LOCATION PLANS, FINISH SAMPLES AND
MANUFACTURER'S LITERATURE ON ALL ITEMS IN ACCORDANCE WITH SECTION 01300 OF
THESE SPECIFICATIONS.
5. PROVIDE CLEANING DATA IN ACCORDANCE WITH SECTION 01710 AND
OF THESE SPECIFICATIONS. INCLUDE RECOMMENDED CLEANING METHODS, CLEANING
MATERIALS, STAIN REMOVAL METHODS.
6. ALL WORK SHALL BE HIGHEST IN QUALITY IN COMPLIANCE WITH
MANUFACTURER'S WRITTEN INSTRUCTIONS AND APPLICABLE CODE REQUIREMENTS.
II MATERIALS -
1. MAT:
1. VERIFY SUPPLIER WITH TENANT OR ALTERNATE - MATS, INC. (800-628-7462)
REMOVABLE ROLL -UP CUSHION EZE, DARK GRAY, 1/2" THICK, DURABLE MARBLEIZED
VINYL, ADHERED TO A COMFORTABLE FOAM BACKING, CUT TO CUSTOM SIZES, MINIMUM
JOINTS PER LOCATION, TO FIT AREAS SHOWN AND SCHEDULED.
2. ALL SETTING AND FLOOR LEVELING MATERIALS AND ANCHORAGE
DEVICES USED FOR MAT SHALL BE COMPATIBLE TO THE SURFACES INSTALLED TO,
EXISTING AND NEW, AS RECOMMENDED BY THE MAT MANUFACTURER.
III EXECUTION -
1. PREPARE AND LEVEL FLOOR SURFACE CONDITIONS REQUIRED FOR
FLUSH, SMOOTH, LEVEL MAT INSTALLATIONS.
2. MAT SHALL BE INSTALLED PER MANUFACTURER'S INSTRUCTIONS.
3. AFTER MAT HAS BEEN INSTALLED AND CONTRACTOR HAS COMPLETED
CLEANUP, THE CONTRACTOR SHALL PLACE HEAVY DUTY BUILDING PAPER OVER THE
MAT, SECURED WITH (2) INCH MASKING TAPE, TO PROTECT THE MAT FROM DAMAGE.
4. PERFORM ALL WORK IN ACCORDANCE WITH SECTIONS 01045, 01400, 01600 AND 01710
OF THESE SPECIFICATIONS.
END OF SECTION 12670
DRAWN DATE
12=1-08
CHECKED JOB NUMBER
0614
SPECIFICATIONS
0101_0__ SUMMARY OF WORK
I WORK INCLUDED -
1 WORK INCLUDED: TENANT FIT OUT OF RETAIL SPACE, INCLUDING NEW
PARTITIONS, ELECTRICAL, MECHANICAL & FINISHES AS FURTHER DEFINED IN THE
CONTRACT DOCUMENTS.
2. ALL WORK TO BE CONDUCTED AS QUIETLY AS POSSIBLE AND WITH A MINIMUM
AMOUNT OF NOISE OR DUST.
3. WHERE THE SCOPE OF THE WORK OF THE CONTRACTOR CALLS FOR SERVICE
CONNECTIONS, SUPPORTS OR INSTALLATION OF ANY ITEM OR GROUP OF ITEMS
BEING FURNISHED BY OTHER CONTRACTS, THE OMISSION OF ANY GIVEN ITEM FROM
THE DRAWINGS OF THIS PARTICULAR CONTRACT SHALL NOT RELIEVE THE
CONTRACTOR OF THE RESPONSIBILITY FOR INSTALLING, CONNECTING OR
SUPPORTING SUCH ITEM AT NO INCREASE IN CONTRACT.
4. THE CONTRACTOR SHALL BE BOUND TO THE BUILDING RULES AS TO THE HOURS
OF WORK, USE OF THE ELEVATORS AND STAIRS, STORAGE AND REMOVAL OF
DEBRIS, ETC. ALL WORK SHALL BE PERFORMED AS EXPEDITIOUSLY AS POSSIBLE.
THE CONTRACT PRICE MUST INCLUDE ANY AND ALL CONSIDERATION OF THE
BUILDING RULES. NO EXTRA CHARGES WILL BE ADDED AFTER CONTRACT SIGNING.
5. THE CONTRACTOR AND SUBCONTRACTORS SHALL PERFORM THEIR WORK IN A
MANNER THAT WILL CAUSE THE LEAST INTERFERENCE TO THE OPERATION OF
THE PRESENT TENANTS AND TO THE PUBLIC.
6. SUBJECT TO THE CONDITIONS ELSEWHERE STATED HEREIN, THE AREAS TO BE
OCCUPIED BY THE PERMANENT CONSTRUCTION WILL BE MADE AVAILABLE TO THE
CONTRACTOR UPON THE COMMENCEMENT OF THE CONTRACTOR'S FIRST
OPERATIONS AT THE CONSTRUCTION SITE. THE CONTRACTOR WILL PROVIDE
PROTECTION OF COMMON AREAS AS NECESSARY, SUBJECT TO THE REVIEW AND
THE ACCEPTANCE OF THE OWNER AND ARCHITECT.
7. THE CONTRACTOR SHALL COOPERATE WITH AND COORDINATE THEIR
OPERATIONS WITH THOSE OF THE OWNER AND ALL TENANTS. THE CONTRACTOR
SHALL SO PLAN AND CONDUCT THEIR OPERATIONS AS TO WORK IN HARMONY
WITH OTHERS ENGAGED AT THE CONSTRUCTION SITE AND NOT TO DELAY,
ENDANGER OR INTERFERE WITH THE OPERATIONS OF OTHERS (WHETHER OR NOT
SPECIFICALLY MENTIONED ABOVE), ALL TO THE BEST INTERESTS OF THE OWNER
AND THE PUBLIC AND AS MAY BE DIRECTED BY THE OWNER, TENANTS AND
ARCHITECT.
8. THE CONTRACTOR SHALL NOT INTERFERE WITH GENERAL PUBLIC ACCESS AND
EGRESS. INTRODUCTION OF MATERIALS AND ACCESS AND EGRESS OF THE
WORKFORCE SHALL BE RESTRICTED TO SUCH PLACES AND IN SUCH MANNER AS
ACCEPTED BY THE OWNER, TENANT AND ARCHITECT.
9. ALL WORK IS REQUIRED TO BE COORDINATED WITH TENANT OPERATIONS
THROUGH THE ARCHITECT. THE CONTRACTOR WILL BE PERMITTED TO WORK
DURING NORMAL WORKING HOURS ONLY TO THE EXTENT THAT SUCH OPERATION
DOES NOT INTERFERE SIGNIFICANTLY WITH OPERATIONS. WORK WITHIN ANY AREA
ENCLOSED BY PERMANENT CONSTRUCTION PARTITION WILL BE PERMITTED DURING
ALL HOURS PROVIDED THAT NOISE LEVELS ARE ACCEPTABLE TO THE OWNER,
TENANTS AND THE ARCHITECT.
10. PROVIDE SUCH EQUIPMENT AND FACILITIES AS ARE NECESSARY OR REQUIRED, IN
CASE OF ACCIDENT, FOR FIRST AID SERVICE TO ANY WHO MAY BE INJURED IN THE
PROGRESS OF THE WORK, AND HAVE STANDING ARRANGEMENTS FOR THE
REMOVAL AND HOSPITAL TREATMENT OF ANY EMPLOYEES WHO MAY BE INJURED
OR WHO MAY BECOME ILL. COMPLY WITH OCCUPATIONAL SAFETY AND HEALTH
STANDARDS ISSUED BY THE SECRETARY OF LABOR PURSUANT TO THE
WILLIAMS-STEIGER OCCUPATIONAL SAFETY AND HEALTH ACF OF 1970 AND AS
AMENDED.
1 1 . WORK BY OWNER
1. THE OWNER MAY AWARD SEPARATE CONTRACTS WHICH WILL COMMENCE
DURING WORK UNDER THIS CONTRACT. THESE CONTRACTS INCLUDE, BUT NOT
NECESSARILY LIMITED TO: TELEPHONES, ELECTRONIC EQUIPMENT, WIRING,
SIGNAL AND COMMUNICATION CIRCUITS.
2. ITEMS NOTED 'NIC' (NOT IN CONTRACT), WILL BE FURNISHED AND INSTALLED BY
OWNER.
3. FOR ITEMS FURNISHED BY OWNER FOR FINAL CONNECTION BY
CONTRACTOR. REFER TO DRAWINGS.
12. OWNER SUPPLIED PRODUCTS
1 . THE FOLLOWING ABBREVIATIONS ARE UTILIZED IN THE CONTRACT
DOCUMENTS:
A. OSOI - OWNER SUPPLIED OWNER INSTALLED.
B OSCI - OWNER SUPPLIED CONTRACTOR INSTALLED.
2. OWNER'S RESPONSIBILITIES: (OSOI & OSCI)
A. ARRANGE FOR AND DELIVER OWNER REVIEWED SHOP DRAWINGS, PRODUCT
DATA, AND SAMPLES, TO THE CONTRACTOR.
B. ARRANGE AND PAY FOR PRODUCT DELIVERY TO SITE.
C. ON DELIVERY, INSPECT PRODUCTS JOINTLY WII-H THE CONTRACTOR.
D. SUBMIT CLAIMS FOR TRANSPORTATION DAMAGE AND REPLACE
DAMAGED, DEFECTIVE, OR DEFICIENT ITEMS.
E. ARRANGE FOR MANUFACTURERS' WARRANTIES, INSPECTIONS, AND
SERVICE.
3. CONTRACTOR'S RESPONSIBILITIES: (OSOI & OSCI)
A. REVIEW OWNER REVIEWED SHOP DRAWINGS, PRODUCT DATA, AND
SAMPLES.
B. RECEIVE, UNLOAD AND UNCRATE PRODUCTS AT THE SITE; INSPECT FOR
COMPLETENESS OR DAMAGE, JOINTLY WITH OWNER.
C. HANDLE AND STORE PRODUCTS.
D. REPAIR OR REPLACE ITEMS DAMAGED AFTER RECEIPT.
E. INSTALL AND FINISH PRODUCTS. (USCI ONLY)
4. ITEMS SUPPLIED TO SITE AND INSTALLED BY OWNER (OSOI):
A. ITEMS AS INDICATED ON THE DRAWINGS.
5. ITEMS SUPPLIED BY OWNER FOR INSTALLATION BY CONTRACTOR (OSCI):
A. ITEMS AS INDICATED ON THE DRAWINGS.
II MATERIALS -NOT USED
III EXECUTION - NOT USED
END OF SECTION 0 10 10
010.19,-_(:QNTRALT U` IDERATIQN_
I WORK INCLUDED -
1. ACCEPTED ALTERNATES WILL BE IDENTIFIED IN OWNER -CONTRACTOR AGREEMENT.
COORDINATE RELATED WORK AND MODIFY SURROUNDING WORK AS REQUIRED.
2. CONTRACTOR SHALL SUBMIT A PRINTED SCHEDULE OF VALUES ON AIA FORM G703 -
APPLICATION AND CERTIFICATE FOR PAYMENT CONTINUATION SHEET, IN DUPLICATE,
WITHIN 15 DAYS AFTER DATE OF OWNER -CONTRACTOR AGREEMENT.
3. CONTRACTOR SHALL SUBMIT THREE COPIES OF EACH APPLICATION FOR PAYMENT TO
THE ARCHITECT ON AIA FORM G702 - APPLICATION AND CERTIFICATE FOR PAYMENT
AND AIA G703 - CONTINUATION SHEET, UTILIZING SCHEDULE OF VALUES.
4. CHANGE PROCEDURES:
'I . THE ARCHITECT WILL ADVISE OF MINOR CHANGES IN THE WORK NOT INVOLVING
AN ADJUSTMENT TO CONTRACT SUM OR CONTRACT TIME AS AUTHORIZED BY
AIA A201, BY ISSUING SUPPLEMENTAL INSTRUCTIONS ON AIA FORM G710.
2. THE ARCHITECT MAY ISSUE A PROPOSAL REQUEST WHICH INCLUDES A DETAILED
DESCRIPTION OF A PROPOSED CHANGE WITH SUPPLEMENTARY OR REVISED
CONTRACT DOCUMENTS, A CHANCE IN CONTRACT TIME FOR EXECUTING THE
CHANGE, WITH A STIPULATION OF ANY OVERTIME WORK REQUIRED AND THE
PERIOD OF TIME DURING WHICH THE REQUESTED PRICE WILL BE CONSIDERED
VALID. CONTRACTOR TO SUBMIT AN ESTIMATE WITHIN SEVEN CALENDAR DAYS.
3. THE CONTRACTOR MAY PROPOSE CHANGES BY SUBMITTING A REQUEST FOR
CHANGE TO THE ARCHITECT, DESCRIBING THE PROPOSED CHANGE AND ITS FULL
EFFECT ON THE WORK. INCLUDE A STATEMENT DESCRIBING THE REASON FOR
THE CHANGE, AND THE EFFECT ON THE CONTRACT SUM AND CONTRACT TIME
WITH FULL DOCUMENTATION AND A STATEMENT DESCRIBING THE EFFECT ON
WORK BY SEPARATE OR OTHER CONTRACTORS.
4. THE ARCHITECT MAY ISSUE AIA FORM G713 CONSTRUCTION CHANGE DIRECTIVE,
SIGNED BY THE OWNER, INSTRUCTING THE CONTRACTOR TO PROCEED WITH A
CHANGE IN THE WORK, FOR SUBSEQUENT INCLUSION IN A CHANGE ORDER.
DOCUMENT WILL DESCRIBE CHANGES IN THE WORK, AND DESIGNATE METHOD
OF DETERMINING ANY CHANGE IN CONTRACT SUM OR CONTRACT TIME.
CONTRACTOR SHALL PROMPTLY EXECUTE THE CHANGE.
5. TIME AND MATERIAL CHANGE ORDER: THE CONTRACTOR SHALL SUBMIT AN
ITEMIZED ACCOUNT AND SUPPORTING DATA AFTER COMPLETION OF CHANGE,
WITHIN TIME LIMITS INDICATED IN THE CONDITIONS OF THE CONTRACT.
ARCHITECT WILL DETERMINE THE CHANGE ALLOWABLE IN CONTRACT SUM AND
CONTRACT TIME AS PROVIDED IN THE CONTRACT DOCUMENTS. MAINTAIN
DETAILED RECORDS OF WORK DONE ON TIME AND MATERIAL BASIS. PROVIDE
FULL INFORMATION REQUIRED FOR EVALUATION OF PROPOSED CHANGES, AND
TO SUBSTANTIATE COSTS FOR CHANGES IN THE WORK.
6. CONTRACTOR SHALL ISSUE CHANGE ORDERS, USING AIA G701 CHANGE ORDER,
FOR SIGNATURES OF ALL PARTIES AS PROVIDED IN THE CONDITIONS OF THE
CONTRACT.
II MATERIALS - NOT USED
III EXECUTION - NOT USED
END OF SECTION 01019
O> a9_- COQRDINATION_AN MEETING S
I WORK INCLUDED -
I . VERIFY THAT UTILITY REQUIREMENTS AND CHARACTERISTICS OF OPERATING
EQUIPMENT ARE COMPATIBLE WITH BUILDING UTILITIES. COORDINATE WORK OF
VARIOUS SECTIONS HAVING INTERDEPENDENT RESPONSIBILITIES FOR INSTALLING,
CONNECTING TO, AND PLACING IN SERVICE, SUCH EQUIPMENT.
2. COORDINATE SPACE REQUIREMENTS AND INSTALLATION OF MECHANICAL AND
ELECTRICAL WORK WHICH ARE INDICATED DIAGRAMMATICALLY ON DRAWINGS.
FOLLOW ROUTING SHOWN FOR PIPES, DUCTS, AND CONDUIT, AS CLOSELY AS
PRACTICABLE. PLACE RUNS PARALLEL WITH LINE OF BUILDING. UTILIZE SPACES
EFFICIENTLY TO MAXIMIZE ACCESSIBILITY FOR OTHER INSTALLATIONS, FOR
MAINTENANCE, AND FOR REPAIR.
3. IN FINISHED AREAS EXCEPT AS OTHERWISE INDICATED, CONCEAL PIPES, DUCTS, AND
WIRING WITHIN THE CONSTRUCTION. COORDINATE LOCATIONS OF FIXTURES AND
OUTLETS WITH FINISH ELEMENTS.
4. AFTER OWNER OCCUPANCY OF PREMISES, ACCESS TO SPACE FOR CORRECTION OF
DEFECTIVE WORK AND WORK NOT IN ACCORDANCE WITH CONTRACT DOCUMENTS
(PUNCH LIST ITEMS), SHALL BE CONDUCTED AT TIMES OTHER THAN REGULAR
WORKING HOURS UNLESS OTHERWISE CONSENTED TO BY THE OWNER.
5. PRE -CONSTRUCTION MEETING
A. A PRE -CONSTRUCTION MEETING WILL BE SCHEDULED AT THE PROJECT SITE
PRIOR TO CONTRACTOR OCCUPANCY.
B. ATTENDANCE REQUIRED: AUTHORITY HAVING JURISDICTION, LANDLORD, OWNER,
ARCHITECT, CONTRACTOR AND CONTRACTOR'S SUPERINTENDENT.
C. AGENDA:
1. USE OF PREMISES BY OWNER AND CONTRACTOR.
2. SECURITY
3. TEMPORARY PROTECTION AND SAFETY
4. DUST AND NOISE PROTECTION
5. STAGING AREA, DELIVERY AND STORAGE OF MATERIALS
6. SCHEDULES AND PHASING OF THE WORK
7. CONTRACTOR PARKING
8. WORK HOURS
9. INSPECTION AND CERTIFICATE OF OCCUPANCY PROCEDURES
10. ANY SPECIFIC REQUIREMENTS BY AUTHORITY HAVING JURISDICTION,
LANDLORD OR OWNER.
D. CONTRACTOR SHALL RECORD MINUTES AND DISTRIBUTE COPIES WITHIN TWO
BUSINESS DAYS AFTER MEETING TO PARTICIPANTS, WITH ONE COPY TO THE
AUTHORITY HAVING JURISDICTION, LANDLORD, OWNER, ARCHITECT, ALL OTHER
PARTICIPANTS AND THOSE AFFECTED BY DECISIONS MADE.
THIS DRAWING AS AN INSTRUMENT
OF SERVICE, IS AND SHALL REMAIN
THE PROPERTY OF ARCHITECT.
USE OF THE DRAWING, OR ANY
REPRODUCTION THERE OF, WITHOUT
THE EXPRESS WRITTEN PERMISSION
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION IN DEROGATION OF THIS
ARCHITECTS RIGHTS.
COPYRIGHT 2008
6. SITE MOBILIZATION MEETING
A. ARCHITECT AND OWNER WILL SCHEDULE A MEETING AT THE PROJECT SITE
PRIOR TO CONTRACTOR OCCUPANCY.
B. ATTENDANCE REQUIRED: OWNER, ARCHITECT, SPECIAL CONSULTANTS,
CONTRACTOR, CONTRACTOR'S SUPERINTENDENT, AND MAJOR
SUBCONTRACTORS.
C. AGENDA:
1. USE OF PREMISES BY OWNER AND CONTRACTOR.
2. OWNER'S REQUIREMENTS.
3. CONSTRUCTION FACILITIES AND CONTROLS PROVIDED BY OWNER.
4. TEMPORARY FACILITIES PROVIDED BY OWNER.
5. SECURITY AND HOUSEKEEPING PROCEDURES.
6. SCHEDULES.
7. PROCEDURES FOR TESTING.
8. PROCEDURES FOR MAINTAINING RECORD DOCUMENTS.
9. REQUIREMENTS FOR START-UP OF EQUIPMENT.
10. INSPECTION AND ACCEPTANCE OF EQUIPMENT PUT INTO SERVICE DURING
CONSTRUCTION PERIOD.
D. CONTRACTOR SHALL RECORD MINUTES AND DISTRIBUTE COPIES WITHIN TWO
BUSINESS DAYS AFTER MEETING TO PARTICIPANTS, WITH ONE COPY TO OWNER,
ARCHITECT, OTHER PARTICIPANTS, AND THOSE AFFECTED BY DECISIONS MADE.
PROGRESS MEETINGS
A. CONTRACT OR SHALL SCHEDULE AND ADMINISTER MEETINGS THROUGHOUT
PROGRESS OF THE WORK AT MAXIMUM WEEKLY INTERVALS.
B. CONTRACTOR SHALL MAKE ARRANGEMENTS FOR MEETINGS, PREPARE AGENDA WITH
COPIES FOR PARTICIPANTS, PRESIDE AT MEETINGS.
7. C. ATTENDANCE REQUIRED: JOB SUPERINTENDENT, MAJOR SUBCONTRACTORS AND
SUPPLIERS, OWNER, ARCHITECT, AND CONSULTANTS APPROPRIATE "1-0 AGENDA
TOPICS FOR EACH MEETING. III
D. AGENDA:
1. REVIEW MINUTES OF PREVIOUS MEETING.
2. REVIEW PROGRESS OF WORK.
3. FIELD OBSERVATIONS, PROBLEMS, AND DECISIONS.
4. IDENTIFICATION OF PROBLEMS WHICH IMPEDE PLANNED PROGRESS.
5. REVIEW OF SUBMITTALS SCHEDULE AND STATUS OF SUBMITTALS.
6. REVIEW OF OFF-SITE FABRICATION AND DELIVERY SCHEDULES.
7. MAINTENANCE OF PROGRESS SCHEDULE.
8. CORRECTIVE MEASURES TO REGAIN PROJECTED SCHEDULES.
9. PLANNED PROGRESS DURING SUCCEEDING WORK PERIOD.
10. COORDINATION OF PROJECTED PROGRESS.
1 1 . MAINTENANCE OF QUALITY AND WORK STANDARDS.
12. EFFECT OF PROPOSED CHANGES ON PROGRESS SCHEDULE AND
COORDINATION.
13. OTHER BUSINESS RELATING TO WORK.
E. CONTRACTOR SHALL RECORD MINUTES AND DISTRIBUTE COPIES WITHIN TWO
BUSINESS DAYS AFTER MEETING TO PARTICIPANTS, WITH ONE COPY TO
ARCHITECT, OWNER, PARTICIPANTS, AND THOSE AFFECTED BY DECISIONS MADE.
PRE -INSTALLATION MEETING
A. WHEN REQUIRED IN INDIVIDUAL SPECIFICATION SECTIONS, CONVENE A
PRE -INSTALLATION MEETING AT WORK SITE PRIOR TO COMMENCING WORK OF
THE SECTION.
B. REQUIRE ATTENDANCE OF PARTIES DIRECTLY AFFECTING, OR AFFECTED BY,
WORK OF THE SPECIFIC SECTION.
8. C. NOTIFY ARCHITECT FOUR BUSINESS DAYS IN ADVANCE OF MEETING DATE.
D. CONTRACTOR SHALL PREPARE AGENDA AND PRESIDE AT MEETING:
1 . REVIEW CONDITIONS OF INSTALLATION, PREPARATION AND INSTALLATION
PROCEDURES.
2. REVIEW COORDINATION WITH RELATED WORK.
E. CONTRACTOR SHALL RECORD MINUTES AND DISTRIBUTE COPIES WITHIN TWO
BUSINESS DAYS AFTER MEETING TO PARTICIPANTS, WITH ONE COPY TO
ARCHITECT, OWNER, PARTICIPANTS, AND THOSE AFFECTED BY DECISIONS MADE.
II MATERIALS - NOT USED
III EXECUTION - NOT USED
END OF SECTION 01039
Q1045 CUTIM. AND,PAZCH NO;
I WORK INCLUDED -
1. THIS SECTION ESTABLISHES GENERAL REQUIREMENTS PERTAINING TO CUTTING
INCLUDING FITTING, AND PATCHING OF ALL THE WORK, INCLUDING
MISCELLANEOUS ARCHITECTURAL, STRUCTURAL MECHANICAL AND ELECTRICAL
WORK REQUIRED OUTSIDE THE CONTRACT LIMIT LINE REQUIRED TO:
1. MAKE THE SEVERAL PARTS FIT PROPERLY, NEW AND EXISTING.
2. CORE DRILL FLOOR STRUCTURE AND SAWCUT FINISH FLOOR TOPPING FOR
ELECTRICAL AND NEW FINISH FLOOR REQUIREMENTS.
3. UNCOVER WORK TO PROVIDE FOR THE INSTALLATION, INSPECTION, OR
BOTH OF ILL-TIMED WORK.
4. REMOVE AND REPLACE WORK NOT CONFORMING TO REQUIREMENTS OF THE
CONTRACT DOCUMENTS.
S. REMOVE AND REPLACE DEFECTIVE WORK.
6. CUT, REPAIR AND PATCH TO MATCH EXISTING WORK LEFT EXPOSED TO
VIEW BY REMOVALS AND WHERE DAMAGED BY THIS CONTRACT WORK.
NO. I DATE I REVISION
2. IN ADDITION TO OTHER REQUIREMENTS SPECIFIED, UPON THE ARCHITECT'S
REQUEST, UNCOVER WORK TO PROVIDE FOR INSPECTION BY THE ARCHITECT OF
COVERED WORK, AND REMOVE SAMPLES OF INSTALLED MATERIALS FOR
TESTING.
D. DO NOT CUT OR ALTER WORK PERFORMED UNDER SEPARATE CONTRACT
WITHOUT THE ARCHITECT'S WRITTEN PERMISSION.
4. PERFORM ALL CUTTING AND PATCHING IN STRICT ACCORDANCE WITH
PERTINENT REQUIREMENTS OF THESE SPECIFICATIONS AND, IN THE EVENT THAT
NO SUCH REQUIREMENTS ARE DETERMINED, IN CONFORMANCE WITH THE
ARCHITECT'S WRITTEN DIRECTION.
5. PRIOR TO CUTTING WHICH AFFECTS THE STRUCTURAL SAFETY OR THE
STRUCTURAL INTEGRITY OF THE BUILDING, SUBMIT A WRITTEN REQUEST TO THE
ARCHITECT FOR PERMISSION TO PROCEED WITH CUTTING. DO NOT CUT ANY
STRUCTURAL WALLS, SLABS OR FRAMING MEMBERS, INCLUDING ANY
REINFORCING UNTIL PERMISSION IS RECEIVED IN WRITING. IF REINFORCEMENT IS
ENCOUNTERED WHERE NOT EXPECTED DO NOT PROCEED WITH CUTTING
WITHOUT NOTIFYING THE ARCHITECT AND RECEIVING WRITTEN PERMISSION TO
PROCEED.
6. PRIOR TO CUTTING AND PATCHING PERFORMED PURSUANT TO THE ARCHITECT'S
INSTRUCTIONS, SUBMIT COST ESTIMATE TO THE ARCHITECT. SECURE THE
ARCHITECT'S ACCEPTANCE OF COST ESTIMATE AND TYPE OF COST
REIMBURSEMENT BEFORE PROCEEDING WITH CUTTING AND PATCHING.
7. SUBMIT WRITTEN NOTICE TO THE ARCHITECT DESIGNATING TIME THE WORK
WILL BE UNCOVERED, TO PROVIDE FOR THE ARCHITECT'S OBSERVATION.
MATERIALS -
1 . FOR REPLACEMENT OF WORK REMOVED, USE MATERIALS WHICH COMPLY WITH
THE PERTINENT SECTIONS OF THESE SPECIFICATIONS. EXISTING AREAS
ABUTTING NEW WORK OUTSIDE CONTRACT LIMIT LINE ARE TO MATCH EXISTING
LIKE WORK IN MATERIAL AND FINISH: SEE SECTION 01400.
EXECUTION -
1 . INSPECT EXISTING CONDITIONS, INCLUDING ELEMENTS SUBJECT TO MOVEMENT
OR DAMAGE DURING CUTTING AND PATCHING.
2. AFTER UNCOVERING THE WORK, INSPECT CONDITIONS AFFECTING
INSTALLATION OFTHE NEW WORK.
3. IF UNCOVERED CONDITIONS ARE NOT AS ANTICIPATED, IMMEDIATELY NOTIFY
THE ARCHITECT AND SECURE NEEDED DIRECTIONS.
4. DO NOT PROCEED IN AREAS OF DISCREPANCY UNTIL ALL SUCH DISCREPANCIES
HAVE BEEN TRULY RESOLVED.
5. PROVIDE ALL REQUIRED PROTECTION INCLUDING, BUT NOT NECESSARILY
LIMITED TO, SHORING, BRACING AND SUPPORT TO MAINTAIN STRUCTURAL
INTEGRITY OF THE WORK,
6. PERFORM ALL WORK AS REQUIRED UNDER PERTINENT SECTIONS OF THESE
SPECIFICATIONS. PERFORM CUTTING AND PATCHING BY METHODS WHICH WILL
PREVENT- DAMAGE TO OTHER PORTIONS OF THE WORK AND WILL PROVIDE
PROPER SURFACES TO RECEIVE OR REPAIR NEW WORK. PERFORM FITTING AND
ADJUSTMENT OF PRODUCTS TO PROVIDE FINISHED INSTALLATION COMPLYING
WITH THE SPECIFIED TOLERANCES AND FINISHES.
7. CORE DRILL SLAB AND MAKE MINIMUM WIDTH AND RUN SAWCUT IN FINISH
FLOOR TOPPING TO FLUSH FLOOR BOX LOCATIONS. ADJUST CORE DRILLING TO
MISS SLAB REINFORCEMENT. PATCH TO MATCH FINISH FLOOR WHERE EXPOSED
TO VIEW.
END OF SECTION 0104.5
01.0 0. -, FERN -L E STANDARDS
I WORK INCLUDED -
'1 . THROUGHOUT'THE CONTRACT DOCUMENTS, REFERENCE IS MADE TO CODES AND
STANDARDS WHICH ESTABLISH QUALITIES AND TYPES OF WORKMANSHIP AND
MATERIALS, AND WHICH ESTABLISH METHODS FOR "TESTING AND REPORTING ON
THE PERTINENT CHARACTERISTICS.
2. ALL MATERIALS AND WORKMANSHIP ARE REQUIRED BY THESE CONTRACT
DOCUMENTS TO MEET OR EXCEED ALL PERTINENT CODES AND STANDARDS. IT IS
THE CONTRACTOR'S RESPONSIBILITY TO PROVIDE MATERIALS AND WORKMANSHIP
WHICH MEET OR EXCEED THE SPECIFICALLY NAMED CODE OR STANDARD.
3. IT IS ALSO THE CONTRACTOR'S RESPONSIBILITY, WHEN SO REQUIRED BY THE
CONTRACT DOCUMENTS OR BY WRITTEN REQUEST FROM THE ARCHITECT, TO
DELIVER TO THE ARCHITECT ALL REQUIRED PROOF THAT THE MATERIALS AND
WORKMANSHIP, OR BOTH, MEET OR EXCEED THE REQUIREMENTS OF A
SPECIFICALLY NAMED CODE OR STANDARD. SUCH PROOF SHALL BE IN THE FORM
REQUESTED IN WRITING BY THE ARCHITECT, AND GENERALLY WILL BE REQUIRED TO
BE COPIES OF A CERTIFIED REPORT OF TESTS CONDUCTED BY A TESTING AGENCY
ACCEPTED FOR THAT PURPOSE BY THE ARCHITECT
4. SPECIFIC NAMING OF CODES OR STANDARDS OCCURS ON THE DRAWINGS AND IN
OTHER SECTIONS OF THESE SPECIFICATIONS.
5. QUALITY ASSURANCE:
1. FAMILIARITY WITH PERTINENT CODES AND STANDARDS.
2. IN PROCURING ALL ITEMS USED IN THIS WORK, IT IS THE CONTRACTOR'S
RESPONSIBILITY TO VERIFY THE DETAILED REQUIREMENTS OF THE
SPECIFICALLY NAMED CODES AND STANDARDS ANDTO VERIFY THATTHE
ITEMS PROCURED FOR USE IN THIS WORK MEET OR EXCEED THE SPECIFIED
REQUIREMENTS.
3. THE ARCHITECT RESERVES THE RIGHT TO REJECT ITEMS INCORPORATED INTO
THE WORK WHICH FAIL TO MEET THE SPECIFIED MINIMUM REQUIREMENTS. THE
ARCHITECT FURTHER RESERVES THE RIGHT, AND WITHOUT PREJUDICE TO
OTHER RECOURSE THE ARCHITECT MAY TAKE, TO ACCEPT NON -COMPLYING
ITEMS SUBJECT TO AN ADJUSTMENT IN THE CONTRACT AMOUNT AS
ACCEPTED BY THE ARCHITECT AND THE OWNER.
II MATERIALS -
1. REFERENCE STANDARDS:
1. REFERENCE STANDARDS LISTED IN THESE SPECIFICATIONS INCLUDE,
BIJT ARE NOT NECESSARILY LIMITED TO, THE LATEST EDITIONS OF
STANDARDS PROMULGATED BY THE FOLLOWING AGENCIES AND
ORGANIZATIONS:
AAMA AMERICAN ARCHITECTURAL MANUFACTURER'S ASSOCIATION
2700 RIVER ROAD, SUITE 1 18, DES PLAINS, IL
(31 2) 699-7310
ACT AMERICAN CONCRETE INSTITUTE
P.O. BOX 19150 REDFOLD STATION
DETROIT, MI 48219
AIA AMERICAN INSTITUTE OF ARCHITECTS
1735 NEW YORK AVE. NW, WASHINGTON, DC 20006
(202) 626-7474
AISC AMERICAN INSTITUTE OF STEEL CONSTRUCTION
400 N. MICHIGAN AVE. 8TH FLR., CHICAGO, IL 60611
(312) 670-2400
AISI AMERICAN IRON AND STEEL INSTITUTE
1000 1 6TH ST. NW, WASHINGTON, DC 20036
(202) 452-7100
AITC AMERICAN INSTITUTE OF TIMBER CONSTRUCTION
333 W. HAMPDEN AVE. ENGLEWOOD, CO 80110
(303) 76'1-3212
ALSC AMERICAN LUMBER STANDARDS COMMITTEE
P.O. BOX 210, GERMANTOWN, MD 20874
(301) 972-1700
AMCA AIR MOVEMENT AND CONTROL ASSOCIATION
30 W. UNIVERSITY DRIVE, ARLINGTON HEIGHTS, IL 60004
(312) 394-0-150
ANSI AMERICAN NATIONAL STANDARDS INSTITUTE
'1430 BROADWAY, NEW YORK, NY '10018
(2'12) 354-3300
APA AMERICAN PLYWOOD ASSOCIATION
P.O. BOX -11 70, TACOMA, WA 9841 -1
(206) 565-6600
ARI AIR CONDITIONING AND REFRIGERATION INSTITUTE
1 501 WILSON BLVD., ARLINGTON, VA 22209
(703) 524-8800
ASC ADHESIVE AND SEALANT COUNCIL
'1600 WILSON BLVD., SUITE 910, ARLINGTON, VA 22209
(703) 841-1112
ASHRAE AMERICAN SOCIETY OF HEATING, REFRIGERATING AND
AIRCONDITIONING ENGINEERS
'1791 TULLIE CIRCLE, NE, ATLANTA, GA 30329
(404) 636-8400
ASME AMERICAN SOCIETY OF MECHANICAL ENGINEERS
345 E. 47TH ST., NEW YORK, NY 1001 7
(2 -12) 705-7722
ASPE AMERICAN SOCIETY OF PLUMBING ENGINEERS
15233 VENTURA BLVD., SUITE 81 1 , SHERMAN OAKS, CA 91403
(21 3) 783-4845
ASTM AMERICAN SOCIETY FOR TESTING AND MATERIALS
1916 RACE ST., PHILADELPHIA, PA 19103
(21 5) 299-5400
AWI AMERICAN WOODWORK INSTITUTE
1952 ISAAC NEWTON SQUARE, RESTON, VA 20190
(703) 733-0600
AWPA AMERICAN WOOD PRESERVERS ASSOCIATION
7735 OLD GEORGETOWN RD.
BETHESDA, MD 20014
AWS AMERICAN WELDING SOCIETY
P.O. BOX 351040, 550 LEJUNE RD., NW, MIAMI, FL 33135
(305) 443-9353
AWWA AMERICAN WATER WORKS ASSOCIATION, INC.
6666 W. QUINCY AVE., DENVER, CO 80235
(303) 794-7711
BOCA BASIC NATIONAL BUILDING CODE BUILDING OFFICIALS AND
CODE ADMINISTRATIONS INTER. INC.
4051 W. FLOSSMOOR RD., COUNTRY CLUB HILLS, IL 60477-5795
(708) 799-2300
BHMA BUILDER'S HARDWARE MANUFACTURER'S ASSOCIATION
60 E. 42ND ST., ROOM 511, NEW YORK, NY 10"165
(212) 682-8142
FGMA FLAT GLASS MARKETING ASSOCIATION
3310 HARRISON ST., TOPEKA, KS 6661 1
(913) 266-7013
IEEE INSTITUTE OF ELECTRICAL AND ELECTRONIC ENGINEERS, INC.
345 E. 47-FFI ST., NEW YORK, NY 1001 7
(21 2) 705-7900
MCAA MECHANICAL CONTRACTOR'S ASSOCIATION OF AMERICA
5530 WISCONSIN ANE., SUITE 250, CHEVY CHASE, MD 20815
(301) 654-7960
NAAMM NATIONAL ASSOCIATION OF ARCHITECTURAL METAL
MANUFACTURERS
221 N, LASALLE ST., CHICAGO, IL 60601
(312) 346-1600
N B S NATIONAL BUREAU OF STANDARDS -U.S. DEPARTMENT OF
COMMERCE
GAITHERSBURG, MD 20234
(301) 921-1000
NEC NATIONAL ELECTRICAL CODE-NFPA
BATTERYMARCH PARK, QUINCY, MA 02269
(617) 770-3300
NECA NATIONAL ELECTRICAL CONTRACTORS ASSOCIATION
7315 WISCONSIN AVE., BETHESDA, MD 20814
(301) 657-3110
Hudson News - Hudson booksellers
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
TERMINAL A -INTERNATIONAL DEPARTURES- UPPER LEVEL
ORLANDO SANFORD
INTERNATIONAL AIRPORT
SANFORD, FLORIDA
NEMA
NATIONAL ELECTRICAL MANUFACTURER'S ASSOCIATION
2'101 L ST., NW, WASHINGTON, DC 20037
(202) 457-8400
NFPA
NATIONAL FIRE PROTECTION ASSOCIATION
BATTERYMARCH PARK, QUINCY, MA 02269
(617) 770-3300
NHLA
NATIONAL HARDWARE LUMBER ASSOCIATION
P.O. BOX 34518, MEMPHIS, TN 38104
(90'1) 377-1818
NMC
NATIONAL MECHANICAL CODE-BOCA
4051 W. FLOSSMOOR RD., COUNTRY CLUB HILLS, IL 60477-5795
(708)799-2300
NPC
NATIONAL PLUMBING CODE-BOCA
4051 W. FLOSSMOOR RD., COUNTRY CLUB HILLS, IL 60477-5795
(708) 799-2300
OSHA
OCCUPATIONAL SAFETY HEALTH ADMINISTRATION
U.S. DEPARTMENT OF LABOR WASHINGTON, DC 20402
SMACNA SHEET METAL AND AIR CONDITIONING CONTRACTORS
NATIONAL ASSOCIATION
P.O. BOX 70, MERRIFIELD,VA 22-116
(703) 790-9890
SSPC
STEEL STRUCTURES PAINTING COUNCIL
4400 5TH AVE„ PITTSBURGH, PA 152"13
(412) 578-3327
TCA
TILE COUNCIL OF AMERICA, INC.
P.O. BOX 326; PRINCETON, NJ 08540
(609) 921-7050
UL
UNDERWRITER'S LABORATORIES
333 PFINGSTEN RD., NORTHBROOK, IL 60062
(31 2) 272-8800
III EXECUTION
-
NOT USED
END OF SECTION
01090
12
DRAWN DATE
'12-1-08
CHECKED JOB NUMBER
0814
GENERAL SPECIFICATIONS
0'1 S00 Sl_1BMLfFALS AND...SUB-,TITl1TIQNS:
I WORK INCLUDED -
1. SUBMS C� DRAW I yGS ON ALL FABRICATED ff-EM a.
2. SUBMIT SAMPLES -QF ALLMSH MATERIALS.
3. SUBMIT MANUFACTURER'S LITERATURE ON ALL MATERIALS NOT INCLUDED IN
THE SHOP DRAWING OR SAMPLE SUBMITTALS.
4. SUBMIT ALL ADDITIONAL REQUIREMENTS AS SPECIFIED ON THE DRAWINGS
INCLUDING STRUCTURAL, MECHANICAL AND ELECTRICAL DRAWINGS.
S. PROVIDE ON-SITE OR SHOP MOCK-UPS WHERE REQUESTED BY THE ARCHITECT.
MOCK-UPS ACCEPTED BY THE ARCHITECT MAY REMAIN IN PLACE OR BE USED AS
THE FINISH PRODUCT.
6. SUBMIT CONSTRUCTION SCHEDULE AND A SUBMITTALS SCHEDULE IN
COORDINATION WITH THE PHASING OF THE WORK.
7. PRIOR TO EACH SUBMITTAL, CAREFULLY REVIEW AND COORDINATE ALL
ASPECTS OF EACH ITEM BEING SUBMITTED TO VERIFY THAT EACH 'ITEM AND
THE SUBMITTAL FOR IT CONFORMS IN ALL RESPECTS WITH THE REQUIREMENTS
OF THE CONTRACT DOCUMENTS. BY AFFIXING THE CONTRACTOR'S SIGNATURE
TO EACH SUBMITTAL, CERTIFY THAT THIS COORDINATION HAS BEEN
PERFORMED.
8. CERTIFY THAT ALL MATERIAL USED IN THE WORK COMPLY WITH ALL SPECIFIED
PROVISIONS THEREOF. CERTIFICATION SHALL NOT BE CONSTRUED AS RELIEVING
THE CONTRACTOR FROM FURNISHING SATISFACTORY MATERIALS IF, AFTER
TESTS ARE PERFORMED ON SELECTED SAMPLES, THE MATERIAL IS FOUND TO
NOT MEET SPECIFIED REQUIREMENTS.
9. SHOW ON EACH CERTIFICATION THE NAME AND LOCATION OF THE WORK, THE
NAME AND ADDRESS OF THE SUB -CONTRACTOR, QUANTITY AND DATE OR
DATES OF SHIPMENT OR DELIVERY TO WHICH THE CERTIFICATE APPLIES, AND
NAME OF THE MANUFACTURING OR FABRICATING COMPANY. CERTIFICATION
SHALL BE IN THE FORM OF A LETTER OR COMPANY STANDARD FORMS
CONTAINING ALL REQUIRED DATA. CERTIFICATES SHALL BE SIGNED BY AN
OFFICER OF THE MANUFACTURING OF FABRICATING COMPANY.
II MATERIALS -
1. SUBMIT ALL SHOP DRAWINGS IN THE FORM OF,(1) SEPIA "TRANSPARENCY AND
(2) BLIJELINE PRINTS OF EACH DRAWING. ALL REVIEW COMMENTS WILL BE
SHOWN ON THE SEPIA TRANSPARENCY AND RETURNED TO THE CONTRACTOR.
THE CONTRACTOR SHALL MAKE AND DISTRIBUTE ALL PRINTS REQUIRED FOR
THEIR PURPOSES.
2. SUBMIT ALL SAMPLES IN THE QUANTITY WHICH ARE REQUIRED TO BE RETURNED
PLUS (2) WHICH WILL BE RETAINED BY THE ARCHITECT.
3. SUBMIT THE NUMBER OF MANUFACTURER'S LITERATURE COPIES WHICH ARE
REQUIRED TO BE RETURNED PLUS (2) COPIES WHICH WILL BE RETAINED BY THE
ARCHITECT.
4. NOTIFY ARCHITECT IN ADVANCE FOR ON-SITE OR SHOP MOCK-UP REVIEW
VISITS.
SUBMIT CONSTRUCTION SCHEDULE AND SUBMITTALS SCHEDULE IN TYPE AND
S. QUANTITIES TO BE DETERMINED AT THE PRE -CONSTRUCTION MEETING.
6. DO NOT SUBSTITUTE MATERIALS, EQUIPMENT, OR METHODS UNLESS SUCH
SUBSTITUTION HAS BEEN SPECIFICALLY ACCEPTED, IN WRITING, FOR THIS WORK
BY THE ARCHITECT. WHERE THE PHRASE "OR EQUAL" OR "OR EQUAL AS
ACCEPTED BY THE ARCHITECT" OCCURS IN THE CONTRACT DOCUMENTS, DO
NOT ASSUME THAT MATERIALS, EQUIPMENT, OR METHODS WILL BE ACCEPTED
AS EQUAL UNLESS THE ITEM HAS BEEN SPECIFICALLY ACCEPTED FOR THIS
WORK BY THE ARCHITECT. THE DECISION OF THE ARCHITECT SHALL BE FINAL.
III EXECUTION -
1. CONSECUTIVELY NUMBER ALL SUBMITTALS. ACCOMPANY EACH SUBMITTAL
WITH A LETTER OF TRANSMITTAL CONTAINING ALL PERTINENT INFORMATION
REQUIRED FOR IDENTIFICATION AND REVIEWING OF THE SUBMITTAL.
2. MAKE ALL SHOP DRAWINGS ACCURATELY TO SCALE, SUFFICIENTLY LARGE TO
SHOW ALL PERTINENT METHODS AND MATERIALS OF CONSTRUCTION. INDICATE
ALL ADJACENT AND ABUTTING MATERIALS, NEW AND EXISTING. FULLY
COORDINATE ALL CONDITIONS AND DIMENSIONS IN THE FIELD. COORDINATE
WITH ALL OTHER TRADES INVOLVED. NOTE SUBCONTRACTOR OF OTHER
TRADES INDICATED; DO NOT USE THE TERM, "BY OTHERS".
3. MAKE ALL SUBMITTALS IN GROUPS CONTAINING ALL ASSOCIATED ITEMS. PARTIAL
SUBMITTALS MAY BE REJECTED.
END OF SECTION 01 300
01 310 CONSTRUCTIONSCEDULE:
I WORK INCLUDED -
1. TO ASSURE ADEQUATE PLANNING AND EXECUTION OF THE WORK, SO THAT THE
WORK IS COMPLETED WITHIN THE NUMBER OF CALENDAR DAYS ALLOWED IN
THE CONTRACT, AND TO ASSIST THE ARCHITECT IN APPRAISING THE
REASONABLENESS OF THE PROPOSED SCHEDULE AND IN EVALUATING
PROGRESS OF THE WORK, PREPARE AND MAINTAIN THE SCHEDULES AND
REPORTS DESCRIBED IN THIS SECTION.
2. "DAY" USED THROUGHOUT THE CONTRACT, UNLESS OTHERWISE STATED, MEANS
"CALENDAR DAY".
3. COORDINATE ALL WORK AND SCHEDULING WITH THE OWNER, AND THEIR USE
OF THE SITE:
1. PHASING OF THE WORK
2. SECURITY
3. TEMPORARY PROTECTION AND SAFETY
4. STAGING AREA, DELIVERY AND STORAGE OF MATERIALS
5. DUST AND NOISE PROTECTION
6. CONTRACTOR'S PARKING AREA
4. QUALITY ASSURANCE:
1 . THE CONSTRUCTION SCHEDULE AS ACCEPTED BY THE ARCHITECT WILL BE
AN INTEGRAL PART OF THE CONTRACT, AND WILL ESTABLISH INTERIM
CONTRACT COMPLETION DATES FOR THE VARIOUS ACTIVITIES.
2. SHOULD ANY ACTIVITY NOT BE COMPLETED WITHIN 7 DAYS AFTER DATED
SCHEDULE DATE, THE ARCHITECT SHALL HAVE THE RIGHT TO ORDER THE
CONTRACTOR TO EXPEDITE COMPLETION OF THE ACTIVITY BY WHATEVER
MEANS THE ARCHITECT DEEMS APPROPRIATE AND NECESSARY, WITHOUT
ADDITIONAL COMPENSATION TO THE CONTRACTOR.
3. SHOULD ANY ACTIVITY BE 14 OR MORE DAYS BEHIND SCHEDULE THE
ARCHITECT SHALL HAVE THE RIGHT TO PERFORM THE ACTIVITY OR HAVE
THE ACTIVITY PERFORMED BY WHATEVER METHOD THE ARCHITECT DEEMS
APPROPRIATE
4. COSTS INCURRED BY THE ARCHITECT IN CONNECTION WITH EXPEDITING
CONSTRUCTION ACTIVITY UNDER THIS ARTICLE SHALL BE REIMBURSED TO
THE ARCHITECT BY THE CONTRACTOR. IT IS EXPRESSLY UNDERSTOOD AND
AGREED THAT FAILURE BY THE ARCHITECT TO EXERCISE THE OPTION TO
EITHER ORDER THE CONTRACTOR TO EXPEDITE AN ACTIVITY BY OTHER
MEANS SHALL NOT BE CONSIDERED PRECEDENT SETTING FOR ANY OTHER
ACTIVITIES.
5. SUBMITTALS:
1. COMPLY WITH PROVISIONS OF SECTION 01300.
2. WITHIN 7 DAYS AFTER RECEIPT OF NOTICE TO PROCEED, SUBMIT THREE
COPIES OF A PRELIMINARY CONSTRUCTION SCHEDULE, PLUS THREE COPIES
OF PROPOSED FORMAT FOR MATERIALS STATUS REPORTS, PREPARED IN
ACCORDANCE WITH PART III OF THIS SECTION.
3. WITHIN 14 DAYS AFTER RECEIPT OF NOTICE TO PROCEED, SUBMIT THREE
COPIES OF THE CONSTRUCTION SCHEDULE, PREPARED IN ACCORDANCE
WITH PART III OF THIS SECTION.
4. ON THE FIRST WORK DAY OF EACH MONTH, FOLLOWING SUBMITTAL
DESCRIBED, SUBMIT THREE COPIES OF THE CONSTRUCTION SCHEDULE AND
THREE COPIES OF THE MATERIALS STATUS REPORTS UPDATED AS
DESCRIBED IN PART III OF THIS SECTION.
II MATERIALS -
1 . CONSTRUCTION ANALYSIS:
1 . GRAPHICALLY SHOW THE ORDER AND INTERDEPENDENCE OF ALL ACTIVITIES
NECESSARY TO COMPLETE THE WORK, AND THE SEQUENCE IN WHICH EACH
ACTIVITY IS TO BE ACCOMPLISHED, AS PLANNED BY THE CONTRACTOR AND
HIS PROJECT FIELD SUPERINTENDENT IN COORDINATION WITH ALL
SUB -CONTRACTORS WHOSE WORK IS SHOWN ON THE DIAGRAM. ACTIVITIES
SHOWN ON THE DIAGRAM SHALL INCLUDE, BUT ARE NOT NECESSARILY
LIMITED TO:
1. PROJECT MOBILIZATION
2. SUBMITTALS AND ACCEPTANCES
3. PROCUREMENT OF EQUIPMENT AND CRITICAL MATERIALS
4. FABRICATION OF SPECIAL MATERIAL AND EQUIPMENT, AND THEIR
INSTALLATION AND TESTING
5. FINAL CLEAN-UP
6. FINAL INSPECTION AND TESTING
2. MATERIALS STATUS REPORTS:
1. THE CONTRACTOR'S STANDARD MATERIALS STATUS REPORT FORM WILL BE
ACCEPTABLE IF, IN THE ARCHITECT'S JUDGEMENT, IT PROVIDES SUFFICIENT
PERTINENT DATA TO DETERMINE THAT MATERIALS PROCUREMENT FLOW IS
ADEQUATE FOR ALL NEEDS OF THE WORK.
2. SHOW AT LEAST THE FOLLOWING INFORMATION:
1 ITEM DESCRIPTION, LISTED IN ACCORDANCE WITH SPECIFICATION SECTION
NUMBER IN WHICH ITEM IS CALLED FOR
2. PURCHASE ORDER NUMBER AND DATE OF ISSUE
3. VENDOR NAME
4. DATE SHIPPED, AND SHIPPING MEANS UTILIZED
5. ESTIMATED DATE OF ARRIVAL AT JOB SITE
6. ACTUAL DATE OF ARRIVAL AT JOB SITE, AND RECEIVING REPORT
NUMBER
THIS DRAWING AS AN INSTRUMENT
OF SERVICE, IS AND SHALL REMAIN
THE PROPERTY OF ARCHITECT.
USE OF THE DRAWING, OR ANY
REPRODUCTION THERE OF, WITHOUT
THE EXPRESS WRITTEN PERMISSION
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION IN DEROGATION OF THIS
ARCHITECTS RIGHTS.
COPYRIGHT 2008
III EXECUTION -
1 . PRELIMINARY ANALYSIS:
1. SHOW ALL ACTIVITIES OF THE CONTRACTOR UNDER THIS WORK FOR THE
PERIOD BETWEEN RECEIPT OF NOTICE TO PROCEED AND SUBMITTAL OF
CONSTRUCTION SCHEDULE REQUIRED.
2. SHOW CONTRACTOR'S GENERAL APPROACH TO THE REMAINDER OF THE
WORK.
3. SHOW COST OF ALL ACTIVITIES SCHEDULED FOR PERFORMANCE BEFORE
SUBMITTAL AND ACCEPTANCE OF THE CONSTRUCTION SCFIEDULE,
4. SUBMITTALS SHALL BE IN ACCORDANCE WITH THE ABOVE CONSTRUCTION
SCHEDULE.
S. AS SOON AS PRACTICABLE AFTER RECEIPT OF NOTICE TO PROCEED,
COMPLETE THE CONSTRUCTION ANALYSIS DESCRIBED ABOVE, IN
PRELIMINARY FORM. MEET WITH THE ARCHITECT, REVIEW CONTENTS OF
PROPOSED CONSTRUCTION SCHEDULE, AND MAKE ALL REVISIONS AGREED
UPON. SUBMIT IN ACCORDANCE WITH ABOVE.
2. MATERIALS STATUS REPORT:
1 . AS SOON AS PRACTICABLE AFTER RECEIPT OF NOTICE TO PROCEED,
COMPLETE THE CONSTRUCTION ANALYSIS DESCRIBED ABOVE, IN
PRELIMINARY FORM. MEET WITH THE ARCHITECT, REVIEW CONTENTS OF
PROPOSED MATERIALS STATUS REPORTS, AND MAKE ALL REVISIONS TO
FORMAT AGREED UPON.
3. REVISIONS:
'I . MAKE ONLY THOSE REVISIONS TO ACCEPTED CONSTRUCTION SCHEDULE
AND MATERIALS STATUS REPORTS AS ARE ACCEPTED IN ADVANCE BY THE
ARCHITECT.
END OF SECTION 01 310
Q14QQ Q ALITY,C'QNTROL:
I WORK INCLUDED -
1. PERFORM ALL WORK IN ACCORDANCE WITH THE BUILDING CODE OF ALL
LOCAL, STATE AND FEDERAL LAWS, CODES AND ORDINANCES HAVING
JURISDICTION OVER THE WORK, INCLUDING ALL ADA ACCESSIBILITY
GUIDELINES AND WITH ALL TRADE STANDARDS AND PRODUCT
MANUFACTURE'S WRITTEN INSTRUCTIONS.
2. INDIVIDUAL REQUIREMENTS FOR QUALITY ASSURANCE ARE DESCRIBED IN
PERTINENT SECTIONS OF THESE SPECIFICATIONS INCLUDING STRUCTURAL,
MECHANICAL AND ELECTRICAL WORK: SEE 'S', 'FP', 'H' AND 'E' DRAWINGS.
3. IN CASE OF CONFLICT BETWEEN STANDARDS, THE MORE STRINGENT
REQUIREMENT SHALL GOVERN. IN ALL CASES WHERE THERE IS A DISCREPANCY
WITHIN OR BETWEEN DRAWINGS AND SPECIFICATIONS IN QUALITY OR
QUANTIFY OF ANY ITEM, MATERIAL, INSTALLATION, DETAIL OR WORKMANSHIP
THE CONTRACTOR SHALL USE THE LARGER QUANTITY, OR BETTER QUALITY
TO PRODUCE THE HIGHEST QUALITY FINISHED WORK.
4. PROVIDE AND REMOVE, IN COORDINATION WITH THE PHASING OF THE WORK
ALL TEMPORARY BARRIERS AND WALLS REQUIRED FOR THE PHASING AND
PROTECTION OF THE CONTRACT WORK. MAINTAIN ALL TEMPORARY FACILITIES
AND CONTROLS AS LONG AS NEEDED FOR THE SAFE AND PROPER
COMPLETION OF THE WORK.
II MATERIALS -
1. PRODUCTS USED IN THE WORK SHALL BE PRODUCED BY MANUFACTURERS
ENGAGED IN THE MANUFACTURE OF SIMILAR ITEMS AND WITH A HISTORY OF
SUCCESSFUL PRODUCTION ACCEPTABLE TO THE ARCHITECT.
2. COMPLY WITH REFERENCED STANDARDS AND BE IN STRICT ACCORDANCE
WITH MANUFACTURER'S WRITTEN INSTRUCTIONS.
3. COMPATIBILITY OF ALL MATERIALS REQUIRED FOR INSTALLATION,
PROTECTION AND CLEANING OF THE MATERIALS SHALL BE VERIFIED WITH THE
MANUFACTURERS OF THE MATERIALS TO BE INSTALLED, PROTECTED AND
CLEANED.
III EXECUTION -
'1. ALL WORK SHALL BE FABRICATED AND INSTALLED IN ACCORDANCE WITH,
COORDINATED ACCEPTED SHOP DRAWINGS WHICH SHALL INCLUDE
CORRECTIONS DUE TO FIELD CONDITION AND DIMENSION VERIFICATIONS.
DETAILS OF SHAPES, MATERIALS AND FINISHES SHALL BE FOLLOWED INSOFAR
AS THE ARCHITECTURAL DESIGN INTENT IS CONCERNED. DETAILS OF
CONSTRUCTION, RELATION OF COMPONENT SECTIONS, METHODS OF
CONSTRUCTION NOT SHOWN ON THE CONTRACT DOCUMENTS SHALL BE
ESTABLISHED BY THE FABRICATOR AND THE INSTALLER WHO SHALL BE
RESPONSIBLE FOR THE INTEGRITY, STRENGTH AND DURABILITY OF THE
FABRICATION AND THE INSTALLATION OF THE WORK RESPECTIVELY.
2. THE INSTALLATION OF ALL WORK SHALL FOLLOW THE MANUFACTURER'S
WRITTEN INSTRUCTIONS FOR SURFACE PREPARATION, TEMPERATURE AND
MOISTURE CONTROL, METHODS OF INSTALLATION AND PROTECTION
PROCEDURES.
3. THE BLENDING OF NEW SURFACES, MATERIALS AND FINISHES WITH SIMILAR
SURFACES, MATERIALS AND FINISHES SHALL RESULT IN NO VISIBLE
DEMARCATION BETWEEN EXISTING AND NEW WORK. HOLES, DAMAGE OR
DEFORMATION RESULTING FROM REMOVALS UNDER THIS CONTRACT SHAL BE
PATCHED TO THE SATISFACTION OF THE OWNER. REPLACE WITH NEW
MATERIALS OR FINISHES, OR BOTH, TO MATCHED THOSE DAMAGED.
END OF SECTION 01400
0i-11QTE TING
Q1 5QQ - CONSTRUCTION FACIL1TI_ES AND TEMPORARY CONTROLS
I WORK INCLUDED -
I WORK INCLUDED -
'I. COOPERATE WITH THE OWNER'S SELECTED TESTING LABORATORY AND ALL
1.
PROVIDE TEMPORARY ELECTRIC FEEDER FROM EXISTING BUILDING ELECTRICAL
OTHERS RESPONSIBLE FOR TESTING AND INSPECTING THE WORK.
SERVICE AT LOCATION AS DIRECTED. DO NOT DISRUPT OWNER'S NEED FOR
CONTINUOUS SERVICE. COMPLEMENT EXISTING POWER SERVICE CAPACITY
AND CHARACTERISTICS AS REQUIRED. PROVIDE POWER OUTLETS FOR
2. PROVIDE OTHER TESTING AND INSPECTING AS SPECIFIED TO BE FURNISHED BY
CONSTRUCTION OPERATIONS, WITH BRANCH WIRING AND DISTRIBUTION
THE CONTRACTOR IN THIS SECTION AND/OR IN OTHER SECTIONS OF THESE
BOXES LOCATED AT EACH FLOOR, AS REQUIRED. PROVIDE FLEXIBLE POWER
SPECIFICATION AND ON THE DRAWINGS, INCLUDING SITEWORK, STRUCTURAL,
CORDS AS REQUIRED. PROVIDE MAIN SERVICE DISCONNECT AND
MECHANICAL AND ELECTRICAL DRAWINGS.
OVERCURRENT PROTECTION AT CONVENIENT LOCATION.
3. WHERE NO TESTING REQUIREMENTS ARE DESCRIBED, BUT THE OWNER DECIDES
THAT TESTING IS REQUIRED, THE OWNER MAY DIRECT THAT SUCH TESTING BE
2.
PERMANENT CONVENIENCE RECEPTACLES MAY NOT BE UTILIZED DURING
PERFORMED UNDER CURRENT STANDARDS FOR TESTING. PAYMENT FOR SUCH
CONSTRUCTION, UNLESS AGREED TO BY OWNER.
TESTING WILL BE MADE AS DESCRIBED IN THIS SECTION.
3.
PROVIDE AND MAINTAIN LIGHTING FOR CONSTRUCTION OPERATIONS TO
ACHIEVE A MINIMUM LIGHTING LEVEL OF 4 WATT/SQ FT. MAINTAIN LIGHTING
4. THE OWNER WILL SELECT A PRE -QUALIFIED INDEPENDENT TESTING
AND PROVIDE ROUTINE REPAIRS.
LABORATORY.
5. THE OWNER WILL PAY FOR INITIAL SERVICES OF THE TESTING LABORATORY AS
4•
PERMANENT BUILDING LIGHTING MAY NOT BE UTILIZED DURING
FURTHER DESCRIBED IN THIS SECTION.
CONSTRUCTION, UNLESS AGREED TO BY OWNER.
6. QUALITY ASSURANCE:
5.
UTILIZE OWNER'S EXISTING HEAT PLANT, EXTEND AND SUPPLEMENT WITH
TEMPORARY HEAT DEVICES AS NEEDED TO MAINTAIN SPECIFIED CONDITIONS
1 . THE TESTING LABORATORY WILL BE QUALIFIED TO THE OWNER'S
FOR CONSTRUCTION OPERATIONS.
ACCEPTANCE IN ACCORDANCE WITH ASTM E329.
6.
PRIOR TO OPERATION OF PERMANENT EQUIPMENT FOR TEMPORARY HEATING
2. TESTING, WHEN REQUIRED, WILL, BE IN ACCORDANCE WITH ALL PERTINENT
PURPOSES, VERIFY THAT INSTALLATION IS APPROVED FOR OPERATION,
CODES AND REGULATIONS AND WITH SELECTED STANDARDS OF ASTM.
EQUIPMENT IS LUBRICATED AND FILTERS ARE IN PLACE. PROVIDE AND PAY
FOR OPERATION, MAINTENANCE, AND REGULAR REPLACEMENT OF FILTERS
AND WORN OR CONSUMED PARTS.
7. PRODUCT HANDLING:
1 . PROMPTLY PROCESS AND DISTRIBUTE REQUIRED COPIES OF TEST REPORTS
7.
MAINTAIN MINIMUM AMBIENT TEMPERATURE OF 50 DEGREES F IN AREAS
AND RELATED INSTRUCTIONS TO ENSURE NECESSARY RE -TESTING AND
WHERE CONSTRUCTION IS IN PROGRESS, UNLESS INDICATED OTHERWISE IN
REPLACEMENT OF MATERIALS WITH THE LEAST POSSIBLE DELAY IN
SPECIFICATIONS.
PROGRESS OF THE WORK.
8.
PROVIDE, MAINTAIN AND PAY FOR TELEPHONE SERVICE, FACSIMILE SERVICE
AND A DEDICATED TELEPHONE LINE TO FIELD OFFICE AT TIME OF PROJECT
MOBILIZATION.
II MATERIALS -
9.
EXISTING PUBLIC TOILET FACILITIES (MAINTAINED BY OTHERS) ARE
1 . PAYMENT FOR TESTING:
AVAILABLE IN THE BUILDING. CONTRACTOR WILL ACCEPT RESPONSIBILITIES
FOR AND VIGOROUSLY PROHIBIT THE COMMITTING OF NUISANCE ON THE SITE
1 . THE OWNER WILL PAY FOR INITIAL TESTING SERVICES REQUESTED BY THE
OF THE WORK.
OWNER.
10.
PROVIDE TEMPORARY PARTITIONS AS INDICATED TO SEPARATE WORK AREAS
2. WHEN INITIAL TESTS INDICATE NON-COMPLIANCE WITH THE CONTRACT
FROM OWNER AND TENANTS OCCUPIED AREAS, TO PREVENT PENETRATION OF
DOCUMENTS, THE COSTS OF INITIAL TESTS ASSOCIATED WITH NOW
DUST AND MOISTURE INTO OWNER AND TENANTS OCCUPIED AREAS, AND TO
COMPLIANCE WILL BE DEDUCTED BY THE OWNER FROM THE CONTRACT
PREVENT DAMAGE TO EXISTING MATERIALS AND EQUIPMENT.
SUM.
3. WHEN INITIAL TESTS INDICATE NON-COMPLIANCE WITH THE CONTRACT
11.
PROTECT INSTALLED WORK AND PROVIDE SPECIAL PROTECTION WHERE
DOCUMENTS, ALL SUBSEQUENT RE -TESTING OCCASIONED BY THE
SPECIFIED IN INDIVIDUAL SPECIFICATION SECTIONS. PROVIDE TEMPORARY AND
NON-COMPLIANCE SHALL BE PERFORMED BY THE SAME TESTING AGENCY
REMOVABLE PROTECTION FOR INSTALLED PRODUCTS. CONTROL ACTIVITY IN
AND THE COSTS THEREOF WILL BE DEDUCTED BY THE OWNER FROM THE
IMMEDIATE WORK AREA TO PREVENT DAMAGE. PROVIDE PROTECTIVE
CONTRACT SUM.
COVERINGS AT WALLS, PROJECTIONS, JAMBS, SILLS, AND SOFFITS OF
2. CODE COMPLIANCE TESTING:
OPENINGS. PROTECT FINISHED FLOORS, STAIRS, AND OTHER SURFACES FROM
TRAFFIC, DIRT, WEAR, DAMAGE, OR MOVEMENT OF HEAVY OBJECTS, BY
1. INSPECTIONS AND TESTS REQUIRED BY CODES OR ORDINANCES, OR BY
PROTECTING WITH DURABLE SHEET MATERIALS.
PLAN APPROVAL AUTHORITY, AND WHICH ARE MADE BY A LEGALLY
CONSTITUTED AUTHORITY, SHALL BE PAID FOR BY THE CONTRACTOR,
UNLESS OTHERWISE PROVIDED IN THE CONTRACT DOCUMENTS.
'12.
PROHIBIT "TRAFFIC OR STORAGE UPON WATERPROOFED OR ROOFED SURFACES.
IF TRAFFIC OR ACTIVITY IS NECESSARY, OBTAIN RECOMMENDATIONS FOR
3. CONTRACTOR'S CONVENIENT TESTING:
PROTECTION FROM WATERPROOFING OR ROOFING MATERIAL MANUFACTURER.
1. INSPECTING AND TESTING PERFORMED EXCLUSIVELY FOR THE
CONTRACTOR'S CONVENIENCE SHALL BE THE SOLE RESPONSIBILITY OF THE
13.
PROVIDE A FIELD OFFICE WITHIN THE CONSTRUCTION AREA FOR ALL
CONTRACTOR.
CONTRACTOR'S, SUPPLY AND STORAGE. PROVIDE SPACE FOR PROJECT
MEETINGS, WITH ALL REQUIRED TABLE AND CHAIRS. THE FIELD OFFICE,
4. INSPECTION BY OWNER'S PERSONNEL:
INCLUDING FURNITURE, WILL REMAIN THE PROPERTY OF THE CONTRACTOR
AND SHALL BE REMOVED FROM THE SITE AFTER COMPLETION OF THE WORK.
I . FROM TIME TO TIME, PERSONNEL IN THE EMPLOY OF THE OWNER MAY
INSPECT THE WORK WHERE THE WORK IS IN PROGRESS, BUT SHALL HAVE
NO AUTHORITY TO DIRECT THE CONTRACTOR OR REQUEST CHANGES IN
14.
REMOVE TEMPORARY UTILITIES, EQUIPMENT, FACILITIES, MATERIALS, PRIOR TO
THE WORK EXCEPT THROUGH THE ARCHITECT.
SUBSTANTIAL COMPLETION INSPECTION.
15.
CLEAN AND REPAIR DAMAGE CAUSED BY INSTALLATION OR USE OF
III EXECUTION -
TEMPORARY WORK.
1 . COOPERATION WITH TESTING LABORATORY:
16.
RES -FORE EXISTING AND PERMANENT FACILITIES USED DURING CONSTRUCTION
TO ORIGINAL CONDITION. RESTORE PERMANENT FACILITIES USED DURING
1 . REPRESENTATIVES OF THE TESTING LABORATORY SHALL HAVE ACCESS TO
CONSTRUCTION TO SPECIFIED CONDITION.
'THE WORK AT ALL TIMES. PROVIDE FACILITIES FOR SUCH ACCESS IN ORDER
THAT THE LABORATORY MAY PERFORM ITS FUNCTION.
II MATERIALS - NOT USED
2. SPECIMENS AND SAMPLES FOR TESTING, UNLESS OTHERWISE PROVIDED IN
III EXECUTION
- NOT USED
THE CONTRACT DOCUMENTS, WILL BE TAKEN BY THE TESTING PERSONNEL.
SAMPLING EQUIPMENT AND PERSONNEL WILL BE PROVIDED BY THE
TESTING LABORATORY.
END OF SECTION 01 500
2. SCHEDULES FOR TESTING:
1. BY ADVANCE DISCUSSION WITH THE TESTING LABORATORY SELECTED BY
THE OWNER, DETERMINE THE TIME REQUIRED FOR THE LABORATORY TO
PERFORM ITS TEST AND TO ISSUE EACH OF ITS FINDINGS.
2. PROVIDE REQUIRED TIME WITHIN THE CONSTRUCTION SCHEDULE.
3. WHEN CHANGES OF CONSTRUCTION SCHEDULE ARE NECESSARY DURING
CONSTRUCTION, COORDINATE SUCH CHANGES OF SCHEDULE WITH THE
TESTING LABORATORY AS REQUIRED.
4. WHEN THE TESTING LABORATORY IS READY TO TEST ACCORDING TO THE
ESTABLISHED SCHEDULE, BUT IS PREVENTED FROM TESTING OR TAKING
SPECIMENS DUE TO INCOMPLETENESS OF THE WORK, ALL EXTRA CHARGES
FOR TESTING ATTRIBUTABLE TO THE DELAY MAY BE BACK -CHARGED TO
THE CONTRACTOR AND SHALL NOT BE BORNE BY THE OWNER.
3. ALTERNATIVE INSPECTION PROCEDURE:
1. THE ARCHITECT SHALL HAVE THE RIGHT TO REQUIRE ALTERNATIVE
INSPECTION PROCEDURE OTHER THAN AS SPECIFIED WHEN, IN THE
ARCHITECT'S JUDGEMENT, OTHER INSPECTIONS ARE REQUIRED TO
DEMONSTRATE COMPLIANCE WITH THE CONTRACT DOCUMENTS. COSTS OF
SUCH ALTERNATIVE INSPECTIONS WILL BE BORNE BY THE OWNER IF
PRODUCTS ARE FOUND TO COMPLY; OTHERWISE, COSTS WILL BE BORNE BY
THE CONTRACTOR.
END OF SECTION 01410
Hudson News - Hudson Booksellers
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
TERMINAL A -INTERNATIONAL DEPARTURES- UPPER LEVEL
ORLANDO SANFORD
INTERNATIONAL AIRPORT
SANFORD, FLORIDA
DRAWN DATE
12 -'1 -Uv
CHECKED JOB NUMBER
0814
GENERAL SPECIFICATIONS
Q10QQ PRODUCT HANDLING:
Q1 12Q PROJECT R_E�'QRN DOCUMENTS: 01730
OPERA"TIONAD MAINTENANCE DATA:
WORK INCLUDED -
5.
CLOSEOUT SUBMITTALS:
I WORK
INCLUDED -
I WORK INCLUDED -
1.
THROUGHOUT THE CONSTRUCTION PERIOD USE ALL MEANS NECESSARY FOR
1. CLOSEOUT SUBMITTALS INCLUDE, BUT NOT NECESSARILY LIMITED TO:
1.
THROUGHOUT PROGRESS OF THE WORK OF THIS CONTRACT, MAINTAIN AN
1 . TO AID IN THE CONTINUED INSTRUCTION OF OPERATING AND MAINTENANCE
THE SAFETY AND PROTECTION OF ALL PERSONS, PROPERTY AND MATERIALS
ACCURATE RECORD OF ALL CHANGES IN THE CONTRACT DOCUMENTS, AS
PERSONNEL, AND TO PROVIDE A POSITIVE SOURCE OF INFORMATION REGARDING
BEFORE, DURING AND AFTER COMMENCEMENT OF THE WORK.
1. COMPUTER AIDED DRAFTED (CAU) "AS -BUILT" RECORD SETS AND
DESCRIBED BELOW.
THE PRODUCTS INCORPORATED IN THE WORK, FURNISH AND DELIVER THE
ASSOCIATED DISKS.
DATA DESCRIBED IN THIS SECTION AND IN PERTINENT SECTIONS OF THESE
2. OPERATION AND MAINTENANCE DATA.
2.
UPON COMPLETION OF THE WORK OF THIS CONTRACT, "TRANSFER BY COMPUTER
SPECIFICATIONS.
2.
DOCUMENTS AFFECTING WORK OF THIS SECTION INCLUDE, BUT ARE NOT
3. WARRANTIES AND BONDS
AIDED DRAFTING (CAD), THE RECORDED CHANGES TO A SET OF RECORD CAD
NECESSARILY LIMITED TO THE SECTIONS IN DIVISION 1 OF THESE
4. KEYS AND KEYING SCHEDULE
DOCUMENT, AS DESCRIBED IN III BELOW.
2. MAKE ALL SUBMITTALS IN STRICT ACCORDANCE WITH PROVISIONS OF SECTION
SPECIFICATIONS AND ADDITIONAL PROCEDURES AS MAY BE PRESCRIBED IN
5. SPARE PARTS AND MATERIAL EXTRA STOCK
01300,
OTHER SECTIONS OF THESE SPECIFICATIONS INCLUDING STRUCTURAL,
MECHANICAL, AND ELECTRICAL WORK: SEE STRUCTURAL, MECHANICAL AND
6. EVIDENCE OF COMPLIANCE WITH GOVERNMENTAL AGENCIES HAVING
JURISDICTION INCLUDING, BUT NOT NECESSARILY LIMITED TO -
3.
THOROUGHLY COORDINATE ALL CHANGES WITHIN THE RECORD DOCUMENT,
3. REQUIRED CONTENTS OF SUBMITTALS MAY ALSO BE AMPLIFIED IN PERTINENT
ELECTRICAL DRAWINGS AND SPECIFICATIONS.
MAKING ADEQUATE AND PROPER ENTRIES ON EACH PAGE OF SPECIFICATIONS
OTHER SECTIONS OF THESE SPECIFICATIONS.
AND EACH SHEET OF DRAWINGS AND OTHER DOCUMENTS WHERE SUCH ENTRY
1. CERTIFICATES OF INSPECTION
IS REQUIRED TO PROPERLY SHOW CHANGE. ACCURACY OF RECORDS SHALL BE
4. SUBMIT THREE CURIES OF THE FINAL MANUAL OR MANUALS "fhlE ARCHITECT
3.
INCLUDE WITHIN THE CONTRACTOR'S QUALITY ASSURANCE REQUIREMENTS
`L. CERTIFICATES OF OCCUPANCY
SUCH THAT FUTURE SEARCH FOR ITEMS SHOWN IN THE CONTRACT DOCUMENT
PRIOR "TQ INDOCTRINATION OF OPERATION AND MAINTENANCEE PERSONNEL.
SUCH PROCEDURES AS ARE REQUIRED TO ASSURE FULL PROTECTION OF THE
MAY REASONABLY RELY ON INFORMATION OBTAINED FROM THE ACCEPTED
WORK.
7. CERTIFICATES OF INSURANCE FOR PRODUCTS AND COMPLETED
RECORD DOCUMENTS.
OPERATIONS
4.
EXCEPT AS OTHERWISE ACCEPTED BY THE ARCHITECT, DETERMINE AND COMPLY
8. LIST OF SUBCONTRACTORS, SERVICE ORGANIZATIONS AND PRINCIPAL
II MATERIALS -
WITH MANUFACTURER'S RECOMMENDATIONS ON PRODUCT HANDLING,
VENDORS, INCLUDING NAMES ADDRESSES AND TELEPHONE NUMBERS
4.
MAKE ALL ENTRIES WITHIN 24 HOURS AFTER RECEIPT OF INFORMATION.
1 WHERE INSTRUCTION MANUALS ARE REQUIRED TO BE SUBMITTED UNDER OTHER
STORAGE, AND PROTECTION.
WHERETHEY CAN BE REACHED FOR EMERGENCY SERVICE AT ALL TIMES
.
SECTIONS OF -THESE SPECIFICATIONS, PREPARE IN ACCORDANCE WITH THE
INCLUDING NIGHTS, WEEKENDS AND HOLIDAYS.
5.
DELIVER THE WORK TO THE JOB SITE PROPERLY CONTAINED AND IDENTIFIED IN SUCH
S.
IN ADVANCE OF THE LOCAL AIRPORT AUTHORITIES FINAL INSPECTION THE
FOLLOWING:
QUANTITIES AND AT SUCH TIME AS TO ASSURE THE CONTINUITY OF THE
CONTRACTOR SHALL SUBMIT THE FINAL RECORD CAU DOCUMENTS TO THE
INSTALLATION.
II MATERIALS - NOT USED
ARCHITECT TO SECURE THE ARCHITECT'S ACCEPTANCE.
1. FORMAT:
6.
MAINTAIN PACKAGED MATERIALS WITH SEALS UNBROKEN AND LABELS INTACT
III EXECUTION - NOT USED
SIZE 8 1/2" X 1 1 ".
PAPER WHITE BOND, AT LEAST 20 LB. WEIGHT.
UNTIL TIME OF USE.
END OF SECTION
01700
TEXT NEATLY TYPEWRITTEN.
7.
PROMPTLY REMOVE DAMAGED MATERIALS AND UNSUITABLE ITEMS FROM THE
DRAWINGS 1 1 " IN HEIGHT PREFERABLE; BIND IN WITH TEXT; FOLDOUTS
JOB. SITE, AND PROMPTLY REPLACE WITH MATERIALS MEETING THE SPECIFIED
01 710 CLEANING:
ACCEPTABLE; LARGER DRAWINGS ACCEPTABLE, BUT FOLD TO
REQUIREMENTS, AT NO ADDITIONAL COST TO THE OWNER.
II MATERIALS -
FIT WITHIN THE MANUAL AND PROVIDE A DRAWING POCKET
WORK
INCLUDED -
INSIDE REAR COVER OR BIND IN WIIhI TEXT.
1 .
PROMPTLY FOLLOWING AWARD OF CONTRACT, SECURE FROM THE ARCHITECT,
1 .
THROUGHOUT -THE CONSTRUCTION PERIOD MAINTAIN THE JOB SITE IN A
AT NO CHARGE TO THE CONTRACTOR ONE COMPLETE SET OF ALL DOCUMENTS
2. PROVIDE FRONT AND BACK CURERS FOR EACH MANUAL, USING DURABLE
II MATERIALS
- NOT USED
STANDARD OF CLEANLINESS AS DESCRIBED IN THIS SECTION.
COMPOSING THE CONTRACT.
MATERIAL ACCEPTED BY THE ARCHITECT AND CLEARLY IDENTIFIED ON OR
2.
IN ADDITION TO STANDARDS DESCRIBED IN THIS SECTION, COMPLY WITH ALL
THROUGH THE FRONT COVER WITH AT LEAST THE FOLLOWING INFORMATION:
III EXECUTION
-
REQUIREMENTS FOR CLEANING UP AS DESCRIBED IN VARIOUS SECTIONS OF
2.
AT A TIME NEAR THE COMPLETION OF THE WORK, PRIOR TO THE REQUEST FOR
THESE SPECIFICATIONS AND WITH ALL PERTINENT REQUIREMENTS OF THE
FINAL INSPECTION, SECURE FROM THE ARCHITECT AT NO CHARGE TO THE
1. OPERATING AND MAINTENANCE INSTRUCTIONS
1.
PROTECT FINISHED SURFACES, INCLUDING JAMBS AND SOFFITS OF OPENINGS
LANDLORD AND ALL OTHER GOVERNMENT AGENCIES HAVING JURISDICTION.
CONTRACTOR, CAD FILES ON DISK OF ALL DOCUMENTS INCLUDED IN THE
2. NAME OFCONTRACTOR
USED AS PASSAGEWAYS, THROUGHOUT WHICH EQUIPMENT AND MATERIALS
CONTRACT.
SUBJECT OF
3. GENERAL SUBJECT OF THIS MANUAL
ARE HANDLED.
3.
CONDUCT DAILY INSPECTION, AND MORE OFTEN IF NECESSARY, TO VERIFY THAT
III EXECUTION
-
2.
PROVIDE PROTECTION FOR FINISHED FLOOR SURFACES IN TRAFFIC AREAS PRIOR
REQUIREMENTS OF CLEANLINESS ARE BEING MET.
3. CONTENTS:
TO ALLOWING EQUIPMENT OR MATERIALS TO BE MOVED OVER SUCH SURFACES.
1.
IMMEDIATELY UPON RECEIPT OF THE JOB SET DESCRIBED ABOVE, IDENTIFY
1. INCLUDE AT LEAST THE FOLLOWING:
4.
SUBMIT MANUFACTURERS WRITTEN INSTRUCTIONS OF THE PROPER CLEANING
EACH OF THE DOCUMENTS WITH THE TITLE RECORD DOCUMENTS - JOB SET".
MATERIALS AND APPLICATIONS REQUIRED FOR THEIR PRODUCTS TO THE
1 IMMEDIATE INFORMATION TO THE LOCATION WITHIN THE MANUAL OF ALL
3.
MAINTAIN FINISHED SURFACES CLEAN, UNMARRED, AND SUITABLY PROTECTED
OWNER, PRIOR TO FINAL ACCEPTANCE.
.
EMERGENCY DATA REGARDINGTHE INSTALLATION.
UNTIL ACCEPTED BY OWNER.
2.
DO NOT USE THE JOB SET FOR ANY PURPOSE EXCEPT ENTRY OF NEW DATA
II MATERIALS -
AND FOR REVIEW BY THE ARCHITECT, UNTIL START OF TRANSFER OF THE DATA
4.
IN THE EVENT OF DAMAGE, PROMPTLY MAKE REPLACEMENTS AND REPAIRS TO
TO FINAL RECORD CAD DOCUMENTS.
2. COMPLETE INSTRUCTIONS REGARDING OPERATION AND MAINTENANCE
THE ACCEPTANCE OF THE ARCHITECT AND AT NO ADDITIONAL COST TO THE
1.
PROVIDE ALL REQUIRED PERSONNEL, EQUIPMENT, AND MATERIALS TO MAINTAIN
OF ALL EQUIPMENT INVOLVED, INCLUDING LUBRICATION,
OWNER.
THE SPECIFIED STANDARD OF CLEANLINESS.
3.
MAINTAIN THE JOB SET AT THE SITE.
DISASSEMBLY, AND RE -ASSEMBLY.
5.
ADDITIONAL TIME REQUIRED TO SECURE REPLACEMENTS AND TO MAKE REPAIRS
2.
USE ONLY THE CLEANING MATERIALS AND EQUIPMENT WHICH ARE COMPATIBLE
4.
IN MOST CASES ON THE DRAWINGS, ARRANGEMENT OF CONDUIT AND AND
3. COMPLETE NOMENCLATURE AND PART NUMBER OF ALL REPLACEABLE
WILL NOT BE CONSIDERED BY THE ARCHITECT TO JUSTIFY AN EXTENSION IN
WITH THE SURFACE BEING CLEANED, AS RECOMMENDED BY THE
CIRCUITS, PIPING, DUCTS, AND OTHER SIMILAR ITEMS, IS SHOWN
PARTS, NAME AND ADDRESS OF NEAREST VENDOR, AND ALL OTHER
THE CONTRACT TIME OF COMPLETION.
MANUFACTURER OF THE SURFACE BEING CLEANED.
SCHEMATICALLY AND IS NOT INTENDED TO POTRAY PRECISE PHYSICAL LAYOUT.
PERTINENT DATA REGARDING PROCUREMENT PROCEDURE.
FINAL PHYSICAL ARRANGEMENT IS AS DETERMINED BY THE CONTRACTOR
END OF SECTION 01 600
SUBJECT TO THE ARCHITECT'S ACCEPTANCE. HOWEVER, DESIGN OF FUTURE
III EXECUTION -
MODIFICATIONS OF THE FACILITY MAY REQUIRE ACCURATE INFORMATION AS TO
2. COPY OF ALL GUARANTEES AND WARRANTIES.
01700CONTRACT CLOSEOUT:
PHYSICAL ARRANGEMENT OF ITEMS WHICH ARE SHOWN ONLY
THE FINAL PHY�T
1.
RETAIN ALL STORED ITEMS IN AN ORDERLY ARRANGEMENT ALLOWING MAXIMUM
SCHEMATICALLY ON THE DRAWINGS.
3. MANUFACTURER'S BULLETINS, CUTS, AND DESCRIPTIVE DATA, WHERE
WORK
INCLUDED -
ACCESS, NOT IMPEDING DRAINAGE OR TRAFFIC, AND PROVIDING THE REQUIRED
r
PERTINENT, CLEARLY INDICATING THE PRECISE ITEMS INCLUDED IN THIS
PROTECTION OF MATERIALS.
5.
THE PURPOSE OF FINAL RECORD CAD DOCUMENTS IS TO PROVIDE FACTUAL
INSTALLATION AND DELETING, OR OTHERWISE CLEARLY INDICATING, ALL
1.
PROVIDE AN ORDERLY AND EFFICIENT TRANSFER OF THE COMPLETED WORK TO
2.
DO NOT ALLOW THE ACCUMULATION OF SCRAP, DEBRIS, WASTE MATERIAL,
INFORMATION REGARDING ALL ASPECTS OF THE WORK, BOTH CONCEALED AND
MANUFACTURER' DATA WITH WHICH THIS INSTALLATION IS NOT
THE OWNER IN ACCORDANCE WITH THE CONTRACT DOCUMENT REQUIREMENTS
AND OTHER ITEMS NOT REQUIRED FOR CONSTRUCTION OF THIS WORK.
VISIBLE, TO ENABLE FUTURE MODIFICATIONS OF DESIGN TO PROCEED WITHOUT
CONCERNED. SUCH OTHER DATA AS REQUIRED IN PERTINENT OTHER
INCLUDING BUT NOT NECESSARILY LIMITED TO THE GENERAL CONDITIONS,
AND EXPENSIVE SITE MEASUREMENT, INVESTIGATION, AND
SECTIONS OF THESE SPECIFICATIONS.
SUPPLEMENTARY CONDITIONS AND DIVISION 1 OF THESE SPECIFICATIONS.LENGTHY
EXAMINATION.
3.
AT LEAST ONCE A WEEK, AND MORE OFTEN IF NECESSARY, COMPLETELY
REMOVE ALL SCRAP, DEBRIS, AND WASTE MATERIAL FROM THE JOB SITE.
6.
FOLLOWING RECEIPT OF THE CAD FILES ON DISK DESCRIBED ABOVE, AND PRIOR
2.
QUALITY ASSURANCE:
TO START OF TRANSFER OF RECORDED DATA THERETO, SECURE A REVIEW BY
III EXECUTION - NOT USED
THE ARCHITECT OF ALL RECORDED DATA. MAKE ALL REQUIRED REVISIONS.
1 . PRIOR TO REQUESTING INSPECTION, USE ADEQUATE MEANS TO ASSURE THAT
4.
PROVIDE ADEQUATE STORAGE FOR ALL ITEMS AWAITING REMOVAL FROM THE
THE WORK IS COMPLETED IN ACCORDANCE WITH THE SPECIFIED REQUIREMENTS
JOB SITE, OBSERVING ALL REQUIREMENTS FOR FIRE PROTECTION AND
c
END OF SECTION 01730
AND IS READY FOR REQUESTED INSPECTION.
PROTECTION OF THE SITE AND THE OWNER'S PROPERTY.
7.
CAREFULLY TRANSFER ALL CHANGE DATA SHOWN ON THE JOB SET OF RECORD
DRAWINGS TO THE CORRESPONDING CAD FILES ON DISK, COORDINATING THE
CHANGES AS REQUIRED, AND CLEARLY INDICATING AT EACH AFFECTED DETAIL
2. PRIOR TO FINAL INSPECTION AND OCCUPANCY VERIFY THAT ALL
S.
DAILY, AND MORE OFTEN IF NECESSARY, INSPECT THE SITE AND PICK UP ALL
AND OTHER DRAWING THE FULL DESCRIPTION OF ALL CHANGES MADE DURING
Q1740_WAR_ AR-NTIES_ANI� zl A�NTEES:
PENETRATIONS, INCLUDING EXISTING, THROUGH FIRE RATED '
SCRAP, DEBRIS, AND WASTE MATERIAL. REMOVE ALL SUCH ITEMS TO A PLACE
CONSTRUCTION AND THE ACTUAL LOCATION OF ITEMS DESCRIBED ABOVE.
FLOORS/WALLS ARE PROPERLY SEALED.
DESIGNATED FOR THEIR STORAGE. MAINTAIN THE SITE IN A NEAT AND ORDERLY
CALL ATTENTION TO EACH ENTRY BY DRAWING A "CLOUD" AROUND THE AREA
I WORK INCLUDED -
CONDITION AT ALL TIMES.
OR AREAS AFFECTED. MAKE ALL ENTRIES TO THE CAD FILES ON DISK NEATLY
3.
SUBSTANTIAL COMPLETION:
AND CONSISTENTLY IN BOLD LINES AND TEXT. IDENTIFY EACH CAD DISK AND
1 . THIS SECTION COVERS PREPARING AND SUBMITTING MANUFACTURER'S
ALL OF THE DOCUMENTS WITHIN WITH THE TITLE "AS -BUILT RECORD SET".
WARRANTIES AND GUARANTEES REQUIRED IN ACCORDANCE WITH THE
1. WHEN THE CONTRACTOR CONSIDERS THE WORK, OR DESIGNATED PORTION
6.
-WEEKLY, AND MORE OFTEN IF NECESSARY, SWEEP ALL INTERIOR SPACES
CONTRACT DOCUMENTS.
THEREOF WHICH IS ACCEPTABLE TO THE OWNER IS SUBSTANTIALLY
CLEAN. "CLEAN", FOR THE PURPOSE OF THIS SUB -PARAGRAPH, SHALL BE
COMPLETE THE CONTRACTOR SHALL PREPARE FOR SUBMISSION TO THE
INTERRUPTED AS MEANING FREE FROM DUST AND OTHER MATERIAL CAPABLE
ARCHITECT A LIST OF ITEMS TO BE COMPLETED OR CORRECTED.
OF BEING REMOVED BY USE OF REASONABLE EFFORT AND HANDFIELD BROOM.
8.
SUBMIT THE COMPLETED TOTAL SET OF RECORD DOCUMENT CAD FILES ON
II MATERIALS -
DISK, AND THREE (3) BOUND (STAPLED) SETS OF ASSOCIATED PRINT-OUTS, IN
NUMERICAL ORDER, TO THE ARCHITECT AS DESCRIBED ABOVE.
1. IN ACCORDANCE WITH SECTION 01300, SUBMITTALS AND SUBSTITUTIONS -
2. THE DATE OF SUBSTANTIAL COMPLETION OF THE THE WORK, OR
7.
FOLLOWING THE INSTALLATION OF FINISH FLOUR MATERIALS, CLEAN THE
DESIGNATED PORTION THEREOF, IS THE DATE CERTIFIED BY THE ARCHITECT
FINISH FLOUR DAILY (AND MORE OFTEN IF NECESSARY) AT ALL TIMES WHILE
WHEN CONSTRUCTION IS SUFFICIENTLY COMPLETE IN ACCORDANCE WITH
WORK IS BEING PERFORMED IN THE SPACE IN WHICH FINISH MATERIALS HAVE
1. SUBMIT BLANK WARRANTY AND GUARANTEE FORMS FOR ACCEPTANCE NOT
THE CONTRACT DOCUMENTS SO THE OWNER CAN OCCUPY OR UTILIZE THE
BEEN INSTALLED. "CLEAN", FOR THE PURPOSE OF THIS SUB -PARAGRAPH, SHALL
LATER THAN 30 DAYS AND BEFORE ANTICIPATED FINAL ACCEPTANCE
THE WORK, OR DESIGNATED PORTION THEREOF FOR THE USE WHICH IT IS
BE INTERPRETED AS MEANING FREE FROM ALL FOREIGN MATERIAL WHICH, IN
AN K FORM, ONE COPY OF EACH FORM
DATE. SUBMIT 4 COPIES OF EACH BLANK
INTENDED.
THE OPINION OF THE ARCHITECT MAY BE INJURIOUS TO THE FINISH FLOOR
WILL BE RETURNED FOR CORRECTION OR FOR USE.
MATERIAL.
END OF SECTION
01 720
3. WITHIN A REASONABLE TIME AFTER RECEIPT OF THE LIST THE ARCHITECT
2. SUBMIT EXECUTED WARRANTY AND GUARANTEE FORMS FOR ACCEPTANCE
WILL INSPECT TO DETERMINE THE STATUS OF COMPLETION.
8.
EXCEPT AS OTHERWISE SPECIFICALLY PROVIDED, CLEAN" (FOR THE PURPOSE OF
NOT LATER THAN 10 DAYS BEFORE THE ANTICIPATED FINAL ACCEPTANCE
THIS ARTICLE) SHALL BE INTERPRETED AS MEANING THE LEVEL OF CLEANLINESS
DATE. SUBMIT 4 COPIES OF EACH EXECUTED FORM, ONE COPY OF EACH
GENERALLY PROVIDED BY STILLED CLEANERS USING COMMERCIAL QUALITY
FORM WILL BE RETURNED FOR CORRECTION OR FOR USE.
4.
FINAL COMPLETION:
BUILDING MAINTENANCE EQUIPMENT AND MATERIALS.
1. UPON RECEIPT OF WRITTEN NOTICE FROM THE CONTRACTOR THAT THE
3. ACCOMPANY BLANK AND EXECUTED FORMS WIThI TRANSMITTAL FORM
WORK IS READY FOR FINAL INSPECTION AND ACCEPTANCE AND UPON
9•
PRIOR TO COMPLETION OF THE WORK, REMOVE FROM THE JOB SITE ALL TOOLS,
CONTAINING THE FOLLOWING INFORMATION -
RECEIPT OF A FINAL APPLICATION FOR PAYMENT, THE ARCHITECT WILL
SURPLUS MATERIALS, EQUIPMENT, SCRAP, DEBRIS AND WASTE. CONDUCT
PROMPTLY MAKE SUCH INSPECTION.
FINAL PROGRESS CLEANING AS DESCRIBED IN ABOVE.
1 . ITEMS COVERED BY THE WARRANTY OR GUARANTEE
2. DATE SUBMITTED TO ARCHITECT
2. THE CONTRACTOR SHALL CERTIFY THAT:
10.
VISUALLY INSPECT ALL SURFACES AND REMOVE ALL TRACES OF SOIL, WASTE
3. PROJECT TITLE AND NUMBER
4. SUPPLIER'S, MANUFACTURER'S OR SUBCONTRACTOR'S NAMES AND
MATERIAL, SMUDGES AND OTHER FOREIGN MATTER. REMOVE ALL TRACES OF
ADDRESSES
1 . CONTRACT DOCUMENTS HAVE BEEN REVIEWED.
SPLASHED MATERIALS FROM ADJACENT SURFACES. REMOVE ALL PAINT
2. WORK HAS BEEN INSPECTED FOR COMPLIANCE WITH THE
DROPPINGS, SPOTS, STAINS, AND DIRT FROM FINISHED SURFACES. USE ONLY
CONTRACT DOCUMENTS.
SPECIFIED MATERIALS AND EQUIPMENT.
III EXECUTION -NOT USED
3. WORK HAS BEEN COMPLETED IN ACCORDANCE WITH THE
CONTRACT DOCUMENTS.
4. EQUIPMENT AND SYSTEMS HAVE BEEN TESTED AS REQUIRED, AND ARE
1 1 .
CLEAN ALL GLASS, BOTH SIDES, INCLUDING EXISTING GLASS TO REMAIN.
OPERATIONAL.
REMOVE ALL LABELS.
END OF SECTION 01 740
5. WORK IS COMPLETED AND READY FOR FINAL INSPECTION.
12.
TO ALL SURFACES REQUIRING THE ROUTINE APPLICATION OF BUFFED POLISH,
3. THE ARCHITECT WILL MAKE AN INSPECTION TO VERIFY STATUS OF
APPLY THE POLISH RECOMMENDED BY THE MANUFACTURER OF THE MATERIAL
COMPLETION.
BEING POLISHED.
4. WHEN THE ARCHITECT DETERMINES THAT THE WORK IS ACCEPTABLE
13.
SCHEDULE FINAL CLEANING, TO BE DONE BY A PROFESSIONAL CLEANING
UNDER THE CONTRACT DOCUMENTS, THE ARCHITECT WILL REQUEST THAT
COMPANY, AS ACCEPTED BY THE ARCHITECT, TO ENABLE THE OWNER TO
THE CONTRACTOR TO MAKE CLOSEOUT SUBMITTALS.
ACCEPT A COMPLETELY PROFESSIONALLY CLEANED PROJECT
END OF SECTION 01 710
THIS DRAWING AS AN .INSTRUMENT
OF SERVICE, IS AND SHALL REMAIN
THEPROPERTY OF ARCHITECT.
USE OF THE DRAWING, OR ANY
REPRODUCTION THERE OF, WITHOUT
THE EXPRESS WRITTEN PERMISSION
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION IN DEROGATION OF THIS
ARCHITECTS RIGHTS.
COPYRIGHT 2008
NO. DATE REVISION
Hudson News - Hudson Booksellers
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
TERMINAL A -INTERNATIONAL DEPARTURES- UPPER LEVEL
ORLANDO SANFORD
INTERNATIONAL AIRPORT
SANFORD, FLORIDA
I DEMOLITION NOTES
1. G.C. SHALL DEMO AND REMOVE ALL EXISTING CON5TRUCTION REQUIRED
FOR NEW WORK. CARE SHALL BE TAKEN 50 A5 TO PROTECT ANY ITEMS
BEING REUSED. REMOVE ALL ITEMS NOT DEING REU5ED (CONDUIT, ETC.)
--DO NOT JUST ADANDON. ALL ELECTRICAL CONDUIT TO DE REMOVED RACK
TO FANEL 13OXE5. ALL DEMOLITION AND REMOVAL SHALL COMPLY WITH
LANDLORD'S & TENANT'5 REQUIREMENTS.
2. G.C. 15 RE5FON51DLE TO VISIT SITE TO ASCERTAIN FULL EXTENT OF
DEMOLITION. NOTIFY THE ARCHITECT IMMEDIATELY OF ANY
INCON515TENCIES OR DISCREPANCIES WITH FLANS IN RELATION TO EXISTING
FIELD CONDITIONS.
3. G.C. SHALL ERECTA CONSTRUCTION DARRICADE OR FROVIDE DUST DARRIER
AS REQUIRED DY LANDLORD.
4. PROTECT EXISTING STRUCTURAL, STEEL & FIRE -PROOFING FROM DAMAGE.
THE GC SHALL MAINTAIN ALL EXITING UL RATED FIRE5TOP5 AT EXISTING
PENETRATION5 DURING DEMO AND CONSTRUCTION
5, G.C. TO COVER LANDLORD'5 OR TENANT'5 EXISTING HVAC RETURN AIR
GRILLE5 FRIOR TO INTRODUCTION OF ANY CONSTRUCTION DUST INTO SPACE.
6. G.C. TO MAINTAIN FIRE-RATING5 OF PARTITIONS, COLUMNS, FLOOR AND
CEILING ASSEMBLIES DURING DEMOLITION.
%. SAVE AND FROTECT UTILITIES WHEN THEY SERVE THE DA5E DUILDING OR
OTHER TENANTS. PRoTEC`T ALL EXISTING STRUCTURE TO REMAIN. DO NOT
CUT, DAMAGE, OR COMFROMI5E THE EXISTING STRUCTURE IN ANYWAY.
LANDLORD UTILITY INTERRUFTIONS MUST DE 5CHEDULED THROUGH THE
LANDLORD'S REFRE5ENTATIVE AND WILL DE CONDUCTED DURING TIME5
CONVENIENT TO "THE LANDLORD AND SURROUNDING TENANT'S.
5. IF ANY AREAS OF LAN1)LOR1)'5 CONSTRUCTION OR TENAN"T'5 CONSTRUCTION
TO REMAIN (CARPET, COLUMNS, CEILING, 5OFFIT5, ETC.) 15 DAMAGED, THE
G.C. SHALL DE RESPONSIDLE FOR REPAIRING/REFLACING DAMAGED AREA
TO MATCH EX15"TING.
9. G.C. TO VERIFY SALVAGE REQUIREMENT5 WITH LANDLORD AND TENAN"T
FRIOR TO 5TARTING WORK. THE G.C. SHALL INQUIRE A5 TO THE STATUS OF
ANY ITEM FOUND IN THE SPACE WHICH 15 NOT EXFRE55LY CALLED OUT ON
THE CONSTRUCTION DOCUMENTS,
10, G.G. SHALL DE RESFON515LE FOR RE -LOCATING AND STORING ALL ITEMS
CALLED FOR "TO DE RE -USED. THE G.C. SHALL, AT HI5 COST, KEFLACE ANY
ITEMS LOST, DAMAGED, OR STOLEN WHILE IN HI5 CARE,
WHERE EX15TING TEMP
WATERFALL EX15T A5 A
13ARRICADE, FRAME FROM
TOF OF UNIT TO C.EILNG
A5 KEOUIRED
5/6" GYP'. DD. FAINTED I—
WHITE' OR A5 OT HERW54
REOUIKED 13Y LANDLOKDI
I
5/8" METAL 5T UD5
@ 16" O,C.
SOUND DATT I1\15ULATION
I
I
I
4" HIGH'bLACK' VINYL b4DE
OR A5 OT'HEKWI5E
REOUIRED DY LANDLORD
I
PROVIDE V150UEEN
DU51'BARKIEK
BRACING - Do NOT ATTACH
bKACE5,fo LANDLORD'S FINISHED
MATEK'1AL5 (TILE, CEILING, WALLS)
CONT. 1'LYvvO0D
UNDER METAL. SPUD
FRAMING
COUNTER WEIGHT
A5 REQUIRED TO
SECURE
BARRICADE
D ETAI L TEMPORARY CONSTRUCTION 13ARRICADE
v ^ 1!„O!!
VERIFY EXI511N0 EXP, JT.
EXTERIOR OF BUILDING
ROOF BELOW
I UL RATED FIRESTOP
A
2-
Vit; i.4 . .. ......... .
E�jST/
NG TE
Mp �V
,� TERM
CONCOURSE
DAKKICADE EXTENDS
' IVI/111`!It'\I' LAIJIINl7OrIVI`lNIXI`�V
:3 UNITIL NEW REDE5IGNED SPRINKLER
I TEMPOKARY CONSTRUCTION
GRID 15 APPROVED AND INSTALLED I ' BARRICADE 5EE DETAIL TH15
i SHEET
�>If3Zss-i3f'k�'it::.5i,4`t iF.'}..,'e '..,. .)^ �.... �i... ._.:.fa�f -.}. 'it > 2..5 .!,43.Sa... ,s. ..3... .. .t ......,r-..... !i�.... a3e ..:1:•..�
i.4z; z..L ta;fi.$i .it..3.;ts:+,
..,.._. i�.3t.. .o!. :?}!<...1;L 4:3i!aY ., ii: :.
F kcsrlEil .§ m ,`i}.L" rtl£Y.ds k'°''r E. Oi? l : SA. ..1 .
asl,i•A Kilt
I .$tv g.kj:
., .,
< R. : f ..,,k a . 4 . ♦fi.., ..� .�>+ .......... :.3.. ,C:.'� , ts...,,..ti: ;�43
}a+...3, ,..._\,.
THIS DRAWING AS AN INSTRUMENT
OF SERVICE, IS AND SHALL REMAIN
THE PROPERTY OF ARCHITECT.
USE OF THE DRAWING, OR ANY
REPRODUCTION THERE OF, WITHOUT
THE EXPRESS WRITTEN PERMISSION
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION IN DEROGATION OF THIS
ARCHITECTS RIGHTS.
COPYRIGHT 2008
NO.
DATE
REVISION
I
2-22-09
TENANT REVISIONS
EX151ING 6_0" HIGH DARKICADE
- EXTEND To CLO
Hudson News - Hudson Booksellers
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
TERMINAL A -INTERNATIONAL DEPARTURES- UPPER LEVEL
ORLANDO SANFORD
INTERNATIONAL AIRPORT
SANFORD, FLORIDA
EXI TING COLUMN
10 REMAIN
CONCOURSE
DRAWN DATE
12-1-v�
CHECKED JOB NUMBER
08'14
DEMOLITION FLOOR PLAN
BARRICADE PLAN
M ETALU NA
Architecture & Design P.C.
1665 1 lighway 588
Ellisville, MS 39,137
TEL 601.9 14.6909
FAX 601.763.,1886
www, M ETALU N,
el`nail: me alunZC
REMOVE EXI5TING
NON-FUNCTIONING
CONPEN5ING UNIT ANP
REPAIR EXI 5'rING
COKKEGATED METAL 51PING
A5 KEGIUIKEP DY A1KFOK'r-
PATCH All HOLF5 IN WALL
AND FIKE CAIJLF A5 KE0T)-
IF KEO'D UY AIRPORT- THE
WORK 10 PATCH METAL
51DING MAY 13E DONE DY THE
AIRPOKT5 MAINTANCE OR 5UE
AT T ENANT 5 EXF EN5E- GC
SHALL CAKKY ALL C05- r IN 1310
THIS DRAWING AS AN INSTRUMENT
OF SERVICE, IS AND SHALL REMAIN
THE PROPERTY OF ARCHITECT.
USE OF THE DRAWING, OR ANY
REPRODUCTION THERE OF, WITHOUT
THE EXPRESS WRITTEN PERMISSION
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION IN DEROGATION OF THIS
ARCHITECTS RIGHTS.
COPYRIGHT 2008
DEMOLITION CEILING PLAN
1/4" = 11,0"
NO.
DATE
REVISION
I
2-22-09
TENANT REVISIONS
AIRPORT CONCOURSE
EXI5TING 5U5PENDED
CEILING TO DE REMOVED
A5 KECIIJIKEP FOK I`IEVV
4VA L. L
LANPLOKD'5 EXI5TING
5U5PEr1MED CEILING
TO REMAIN
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
TERMINAL A -INTERNATIONAL_ DEPARTURES- UPPER LEVEL
ORLANDO SANFORD
INTERNATIONAL AIRPORT
SANFORD, FLORIDA
LANDLORD'5 EXI5TING
51J5PENDEP CEILING
TO KEMAII`I
m
DRAWN DAI L
12=1-oa
CHECKED JOB NUMBER
0814 -
DEMOLITION CEILING PLAN
D-1.1
E V I to"i'l 0"
THIS DRAWING AS AN INSTRUMENT
OF SERVICE, IS AND SHALL REMAIN
THE PROPERTY OF ARCHITECT.
USE OF THE DRAWING, OR ANY
REPRODUCTION THERE OF, WITHOUT
THE EXPRESS WRITTEN PERMISSION
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION IN DEROGATION OF THIS
ARCHITECTS RIGHTS.
COPYRIGHT 2008
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
TERMINAL A -INTERNATIONAL DEPARTURES- UPPER LEVEL
ORLANDO SANFORD
INTERNATIONAL AIRPORT
SANFORD, FLORIDA
LIFE SAFETY PLAN
1 :0111 U Lvi. 1 -4 �m �l LO -1 C,
1, FOR ALL EQUIPMENT TO DE SELECTED DY TENANT ANP IN5TALLEP DY G.C.. AN EQUIPMENT ALLOWANCE WILL 5E ADDED TO ALL 13109. THE TENANT
WILL SELECT AND OKPER EQUIPMENT ANP SEND THE PURCHASE ORPER TO THE GC. FOR IMMEPIATE THE G.C, 5HALL RECEIVE, UNLOAD, AND UNCRATE
FRODIJCTS, INS1 LG r FUR CUIvIFLE l"ENE55 Ori DAMAGE, FIAt IDLE AND POKE PRODUCTS. AN'( I-rElvlS DAMAGED AF'rEK KECEIr,,I` 5HALL BE REFAIKED OK
KEFLACEP BY T HE G.C. THE G.C. 5HALL INF)TAL1_ AND FIN15H ITEMS FEF: MANUFAcrUKER'S IN5TRUCrION5•
2. T TIE G.C. 5HAL.L RECEIVE, UNLOAD, UNCRATE FROPUCT 5, HANDLE, AND 5 TORE ITEM5 THAT ARE FURNI5HE1) BY TENANT AND IN51AL.LEU BY TENANT.
Coor,bmArE WITH TENANT REFRESENTATIVE.
3.
THE G.C. 5HALL VERIFY ALL F 04VER, WATER, AND DRAINAGE F.ECIIJIREMENTS WITHTHE MANUFACI U}:E1. S 5PECIFICATION5/IN51 RIJCTION5 FOR THE
EQUIPMENT "r0 BE IN5IALLED FKIOF: T"0 S'rAR'r OF cDNF)'rRUCr10N. THE G.C, 5HALL COOKDINArE THE EXACT LOCATION AND 51ZE OF EACH FIECE OF
EQUIPMENT ANO THE REQUIREP I1\15TALL_ATION CONNECTION5 WITH THE TENANT KEPRE5ENTATIVE PRIOR TO IN51-AL.LATION.
EQUIPMENT SCHEDULE
CONSTRUCTION NOTES
1,
ALL PIMEN51ON5 ARE 10 FACE OF FINISHED MATERIAL (GYFK BD„
10. SAVE ANP FKOTECT u'rll_ITIE5 WHEN THEY SERVE THE BA5E
ELECTRICAL
TILE, ETC,'.) UNLE55 OTHERWI5E NOT EP.
BUILDING OR OTFIER TENANT5. FKOTECT ALL EXISTING 5TKUCTUKE
0
CA5H REGISTER
AND FIKE-FROOFING TO REMAIN, DO NOr CUT, DAMAGE, OR
2.
f AR'rrr10N5 5HOWN 5HADED INDICATE NEW FAKTITION5 OR
COMNr:OM15E THE EXI5TING 5TKUCTUKE IN ANYWAY. LANDLOKD
G.C.
CON51-RUCTION, UN5HAPEP 1'ARTITION5 INDICATE EXI5TING
U'rILI FY INTERRUFTION5 MU51'SE 5CHE1)ULEU THKOUGf-I'rHE
'SOUTHERN 5TORE FIXTURE INC'
MPC-V8HH5C
PA F:f"rrIUNS/COLUMNS TO KEMAIN. BRACE FARTITIOH 5 "r0 EXISTING
LANDLORD'5 KEFKE5ENTATIVE AND WILL BE CONDUCTED PUKING
TENANT
5 r KUCTURE ADOVE.
TIME5 CONVENIENT TO THE LANPLOKP ANP 5UKKOUHUING
FLAT 5CREEN
D15PLAY
VERIFY
TEHANT'5.
3.
ALL METAL 5'rUD510 BE 5 518", 20 GA, 916" O.C., UNLE55
G.C.
0
OTHEKWI5E NOTED. ALL GYP 131). TO 13E 50" TYFE'X', UNLE55
IF ANY AREAS OF LANDLOKV5 CON51-RUCTION (GARFET,
VERIFY
OTHERWI5E NOTED.
TL COLUMN5, CEILING, TILE, ETC.) 15 DAMAGED, THE G.C. SHALL BE
G.C.
LANDLORD, ALL POOR COMFONENT5 TO CONFORM TO LAHOLORV5 5TANDAR05, PAINT LANPLORO'S 51PE OF POOR &
KE51`01\151BL.E FOK REPAIRING/REPLACING DAMAGED AREA TO
4,
ALL WOOF FURRING/BLOCKING TO BE FIFE-KETAKOENT TREATED
MATCH EXI5TING.
WOOF.
G.C. TO (.;OVER/REMOVE LANPLORV5 OR. TENANV5 EXI5TING HVAC
5.
G.C.TO COOKDINAI E ANY ALARMING REQUIREMENT 5 WITH THE
RETURN AIR 0KII_LE5 FKIOK TO INTKOPLic'nON OF ANY
TENANT REFRE5ENTATIVE AND LANPLOKI).
12. CON5TKuc-rioN UL15'r Irmo 5f ACE.
6.
ANY PENETRATIONS ,rHKU FIKE-RAT Ep WALLS, FLOOK5, AND
LANDLORD KEQUIKEMENT5 FOK "rHE BAKRICADE CON5TKL1CrioN,
CEILING5 SHALL DE 5LEEVED ANP 5EALED WITH AFFROVEP
INCLUDING ACCE55 DOOR AND KEYING, SHALL SUFEK5EDE NOTES
FIKE-KATED 5EALANT. G.C, TO COOKOINATE PENETRATION5 WITH
AND PETAiI.5 5HOWN IN THE COH51-RUCTION DOCUMENT 5.
LAN DLOKD.
13.
THE DARICAUE LOCATION SHALL NOT IMFEDE LIFE SAFE"rY OF
V.
ANY 5LAD FENETKATION5 TO BE MADE MU5T PIE X-KAYEU AND THE
AREAS BEING U5EU BY "rHE FUDLIC. THE BARRICADE 5HALL NOT
LOCATION APFKOVEU BY THE LANDLORD FKIoR To COKING OF SLAB.
INTERFERE WITH THE V15 m-rY OF EXI-r 51GN5. THE G.C. 5HALL
ALL CURE DRILLING 5HALL- FOLLO'vV LANUI.OKU'5 REQUIKEIvIEHT 5.
PROVIDE TEMFOKAKY EXITING 510NAGE TO DIKECr FUBLIC
14, AROUND BAKKICADE IF NEEDED. COORDINATE WORK WITH
G.C. TO MAINTAIN FIKE-RAT ING5 OF PART IT ION5, COLUMNS, FLOOR
LANULOKU AND LOCAL FIRE MAR5HAL/BUILDING DEFAKI MEN_r
6.
AND CEILING A55EMBLIE5 DURING CONST RUC:r10N.
OFFICIAL.
G.C. 5HALL ERECT A CON51-RUCTION BARRICADE A5 REQUIRED BY
THE LANDLORD. THE BARRICADE 5HALL BE TYPE AND LOCATION A5
9.
SHOWN ON CON5TKUCT10N FLAN UNLE55 OTHEKWI5E KEQUIRED BY
'rHE LANDLORD,
1 :0111 U Lvi. 1 -4 �m �l LO -1 C,
1, FOR ALL EQUIPMENT TO DE SELECTED DY TENANT ANP IN5TALLEP DY G.C.. AN EQUIPMENT ALLOWANCE WILL 5E ADDED TO ALL 13109. THE TENANT
WILL SELECT AND OKPER EQUIPMENT ANP SEND THE PURCHASE ORPER TO THE GC. FOR IMMEPIATE THE G.C, 5HALL RECEIVE, UNLOAD, AND UNCRATE
FRODIJCTS, INS1 LG r FUR CUIvIFLE l"ENE55 Ori DAMAGE, FIAt IDLE AND POKE PRODUCTS. AN'( I-rElvlS DAMAGED AF'rEK KECEIr,,I` 5HALL BE REFAIKED OK
KEFLACEP BY T HE G.C. THE G.C. 5HALL INF)TAL1_ AND FIN15H ITEMS FEF: MANUFAcrUKER'S IN5TRUCrION5•
2. T TIE G.C. 5HAL.L RECEIVE, UNLOAD, UNCRATE FROPUCT 5, HANDLE, AND 5 TORE ITEM5 THAT ARE FURNI5HE1) BY TENANT AND IN51AL.LEU BY TENANT.
Coor,bmArE WITH TENANT REFRESENTATIVE.
3.
THE G.C. 5HALL VERIFY ALL F 04VER, WATER, AND DRAINAGE F.ECIIJIREMENTS WITHTHE MANUFACI U}:E1. S 5PECIFICATION5/IN51 RIJCTION5 FOR THE
EQUIPMENT "r0 BE IN5IALLED FKIOF: T"0 S'rAR'r OF cDNF)'rRUCr10N. THE G.C, 5HALL COOKDINArE THE EXACT LOCATION AND 51ZE OF EACH FIECE OF
EQUIPMENT ANO THE REQUIREP I1\15TALL_ATION CONNECTION5 WITH THE TENANT KEPRE5ENTATIVE PRIOR TO IN51-AL.LATION.
EQUIPMENT SCHEDULE
NO.
ITEM
MODEL/MANUFACTURER
SIZE
ELECTRICAL
FURNISHED
BY
INSTALLED
BY
0
CA5H REGISTER
VERIFY
VERIFY
VERIFY
TENANT
G.C.
OOPEN
2
FACE
KEFKIGEKATE'P CA5E
'SOUTHERN 5TORE FIXTURE INC'
MPC-V8HH5C
SO'I/2"W x 29 5/8"P
x 7t3 /gIIFI
120/240 4 WIRE WITH
NEUTKAL
N E1vIA: L14-201; '16.OA
TENANT
G.C.
O42"
FLAT 5CREEN
D15PLAY
VERIFY
VERIFY
VERIFY
TENANT
G.C.
0
PIGITAL FROCE55oK,
VERIFY
VERIFY
VERIFY
TENANT
G.C.
0163hAR1TITION LEND
MARK
EXISTING PARTITION TO REMAIN. G.0TO PREPARE EX15 TING WALL 5URFACE5 FOR NEW FINIE)HE5 WHEKE REQUIRED.
I HAF DWAKE/REMAM5
NEW PARTITION - WALL TYPE 1. 5/8" GYP BD, ON PUBLIC 510E OF 55/6" METAL 61-1-J25-004 '. NLE55
0"TF� FKVt P IT d�N DWGS. U5E (2) #& x 7/16" PAN HEA 2 L`CONNECTION. 5EGIJKE TO 5LAB WITH
MIN. Vl8" LONG POWER -1)1_'17 2 IAX.- 0.118" DIA HILTI X -PW. FINI5HEP FACE OF NEW PARTITION
NOT USED -2
TO BE FL.U51 I OWN. ExrENP OiYK Bp. 3" ABOVE LAY -IN CEILING
lF 64PE-01` FACE AND TO DECK ON AIRFORT SIDE TO MATCH EXISTING �YKF�t �HES A5 DETAILED,
-
�
�.!)
NE PAKTTT�ION WALL TYPE 4�/8" GYF U. 01` 3 5/8" METAL Sl OF S <c� 'I " OC., -U511(2) #8 x7/16'' PAN HEAD
E re Al -Ak{'C:i`}PIF} 14C-)fK1. '✓ tiJ1tC fTkL TL1 (' c' FLI �i(G "C) I -
0.116" PIA HILT I X -PW. FINI51-1E1) FACE OF NEW FART"ITION TO BE FLU511 WITH APJACENT EXI5TING PARTITION5 WHERE
51-IOWN. PF:OVIDE FINISH MATERIALS A5 DETAILED. SEE DETAIL 1/A4.0
�2
NEW MILLWORK FIXTURES. 5EE MILLWORK PLAN 51-IEE"i' F-1.0
Irl- E IN FLOOR A5 KEQ'D. FROVIDE OUT5I0E CYLINDER. LOCK ANP IN51PE QUICK RELEA5E 900 (MAX,) "THUMB TUKN FOR
TEMPORARY CONSTRUCTION DARRICAPE, 5EE DETAIL ON 5HEEr P-1.0
J
EMEF'GENCY EXIT, IN5TALLKHON 5HALL DE B`( GRILLE MAN UFACTUKER'5 AU'riIOKIZED DISTRIBUTOR OR
AlDOOR SCHEDULE
MARK
v 51 ZVE V
I HAF DWAKE/REMAM5
��;
A5 c
A� �H04V�1
510E -GLUING GRILLE A5 MANF. BY "F)YNAFLAIR" 800 840-3962 OK EQUAL- "ELEGANCE-Ff"' ANO[). ALUM• WITH
( )
�.!)
PERG:ArED FANEL5 FROVIOE OPTIONAL ONE-5TEF TOP & BOTTOM LOCKING 5Y5TEM ON EACH END WITH DUB rPKOOF
(VERIFY EXIE)ITNG GATE
Irl- E IN FLOOR A5 KEQ'D. FROVIDE OUT5I0E CYLINDER. LOCK ANP IN51PE QUICK RELEA5E 900 (MAX,) "THUMB TUKN FOR
V A
TRACK FOR KEU5E)
EMEF'GENCY EXIT, IN5TALLKHON 5HALL DE B`( GRILLE MAN UFACTUKER'5 AU'riIOKIZED DISTRIBUTOR OR
REF .E5ENTATIVE. G.C. 5HALL INSTALL REC:IIJIRED BLOCKING. GC 5HALL COORDINATE EXACT LOCATION AND 51ZE5 OF
.
7.7.71
f..
AL REQUIRED CUTOUTS, 5FACE REQUIREMENTS, AND DIMEN5101\15 FOR 5UFFOKT WITH 0.1 -HER FIN15H WORK.
-��-�
`-�'-
C0
f"AIK3x6*o'er
J �J c- c
5.C. WOOD ROOK OF. HOLLOW METAL & ME"I"AL FRAME, r I�UVIDE CLG �f=K MOU�I TED UN rE�IAN rS �10E OF DUUf.•
-1-U
(5EE SHEET P- 1.0)
LOCK5Ef''ro BE'EN,rKANCE/OFFICE' Fal WITH HANPICAFFEU-ACC:E551BLE LEVER, TYFE & FIN15H MATCH LAMDLORP
-`• (G
c J , ,� � c
51-ANDARD, NO HA51`5 OR 1-A[)LOCK✓ f-EKMITTEP. COORPINA'1'E KEYING OF LOCKS WITH TENANT KEI`RE5ENT'ATIVE ANP
LANDLORD, ALL POOR COMFONENT5 TO CONFORM TO LAHOLORV5 5TANDAR05, PAINT LANPLORO'S 51PE OF POOR &
FKAME TO MATCIf ADJACENT BARRICADE.
NOTE:
ENSURE ALL CONCEALED WOOD AND BLOCKING TO
BE FIRE RATED TREATED WOOD
NOTE:
ALL FINISHES INCLUDING MILLWORK SHALL BE
CLASS A MATERIALS.
M_F
TA_UNA
Architectur_c & Design PC.
1665 I IIS hwa 588
g /
LIIIsvllle 9/1 M5
3 37
-1 EL 601.914.6909
FAX 601,763.4886
www, M E-FALU NAarchi tects.corn
email: rTletalunaa�mindsprin.com
THIS DRAWING AS AN INSTRUMENT
OF SERVICE I L
S AND SHALL REMAIN
THE PROPERTY OF ARCHITECT.
USE OF THE DRAWING OR ANY
REPRODUCTION THERE OF WITHOUT
THE EXPRESS WRITTEN PERMISSION
I N
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION I
N DEROGATION OF THIS
ARCHITECTS RIGHTS.
COPYRIGHT 2008
m
C�
T
I
Tlop_
A
it uy ii `� � �. (fl` ' , '��••'• �lf'L.L� V��j C•• / •-- ®®. _ _ � �
II TUI II `_Jn�
I II III II ' 1 � � / ' v -f' ``v";, %r..�"�j1:�'_;''�:•.... �' - __ 6
08
A5.0 - ray ,,a., �X-f' _ •• ( A5,U
I II III, II , - �,,,' •- I - I
-
I
• 'l
r
I II IIII II , , /,��� = ry'.`::`.`.•.•• ,/ ._-__.. _ "___"
I II IIII II / , �'b ,< '•�• t.. •,. '
I II IIII II / / •�, � � _
OUT LET F0 TV t. N
I
OUTLET FGR. VIDEO_ '`~,� Ir' I 1 ➢i
III II /
r �j,
IIII II oCE55oK uNIT I I,
I II IIII II A2,G • ,' / II t _ 1
I II IIII II ,' ' n
II III; II Hudson Booksellers IEI D ; 1
�i HOKZ,
' IN BA5E
AIRPORT TERMINAL
� , J
Lry�I ELECTRIC FANEL,
_r rl •',I ' , TELEPHONE BOARD, \
I IIII II ,' (�(Cor`flAGroK 5wrrcH � \
I II IIII II / /
36" HIGH x 36" (MIN.) WIDE \�dy_ LINE OF EXISTING
HANDICAFFED-ACCESSIBLE \ 51GN 5HE1_F
ECGUN'rEr\IOr ' O F (T`(F 5I -TAPED) ABOVE TO REMAIN
\
II IIII II/ \
L/L_JII __j -_I14 II A2.0 / '----------
_.-----
----------
II IIII II / / 11 11 ry �^-___-7�;<,�, ♦_ \\ \
I II IIII II / / I II II II 11 `�---J
I II IIII II / I II II II I � ,�
L _l l _ _1111
i =__ - _- ___� I 1 I/ �`1:�__'I�IW�'-�I ,�;I rrll I I W 1
-�`_' I ' '' '' (f II III II f•-
I (-____----__, r-
I it
^ i 1---------- I I v I
I_07I II II 11 II II I
I
11 I j
II , LLI
NEW EASE SPACE r-
(\/ �\/\ , ADDI ION
;.,I Ali
I
36" HIGH x 36" (MIN.) WIDE G
HANDICAFFEU-ACCE551BLE A2,U I
COUNTERTOP ('IYf' 5rIAPED) I
1 II
ii HORZ,p I
n IN BA5E Hudson News
I 11 I
u
OUFLEX MOUNTED IN I
u MILLWOKK 0,104" AFF /
A2.0
(TY!". UNLE55 OTHERWISE /
1 NOTED) /
A /
� n
I II A2.G /
L /
DUPLEX FOR COOLER ,
MTD. IN FAKTITION ,
1 I
I
' I,.IGCCCKQZ. i ir-----///- \-___-11 Ir----/ -- ---moi i; ----------
I
--------
L_ �' IL15L I II ( J ) n I / O� II 11 II I / I A3.0
-'I a`I --_ -JI--_-_ -'-- I II v II \��-// II II I IL,
I s� _
15: �^• . `�1 II II II Imo---------- L =[^'
'-I II I II I I I
11 11 it 11 11
,{ 'I
I (I I I' I I I I III I -1\J 1T
�rL---------- '--------- (5 ---------- I IL--------- -II IL--------- II I (hi ��I d j- I
NO.
DATE
REVISION
I
:r..:
...\tet
................................................. .
.::::.::...:::.............. .::.:..
..............::.>:.;.:... ..::::.
V A
IF
\\ AFN
.
7.7.71
f..
f..
THIS DRAWING AS AN INSTRUMENT
OF SERVICE I L
S AND SHALL REMAIN
THE PROPERTY OF ARCHITECT.
USE OF THE DRAWING OR ANY
REPRODUCTION THERE OF WITHOUT
THE EXPRESS WRITTEN PERMISSION
I N
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION I
N DEROGATION OF THIS
ARCHITECTS RIGHTS.
COPYRIGHT 2008
m
C�
T
I
Tlop_
A
it uy ii `� � �. (fl` ' , '��••'• �lf'L.L� V��j C•• / •-- ®®. _ _ � �
II TUI II `_Jn�
I II III II ' 1 � � / ' v -f' ``v";, %r..�"�j1:�'_;''�:•.... �' - __ 6
08
A5.0 - ray ,,a., �X-f' _ •• ( A5,U
I II III, II , - �,,,' •- I - I
-
I
• 'l
r
I II IIII II , , /,��� = ry'.`::`.`.•.•• ,/ ._-__.. _ "___"
I II IIII II / , �'b ,< '•�• t.. •,. '
I II IIII II / / •�, � � _
OUT LET F0 TV t. N
I
OUTLET FGR. VIDEO_ '`~,� Ir' I 1 ➢i
III II /
r �j,
IIII II oCE55oK uNIT I I,
I II IIII II A2,G • ,' / II t _ 1
I II IIII II ,' ' n
II III; II Hudson Booksellers IEI D ; 1
�i HOKZ,
' IN BA5E
AIRPORT TERMINAL
� , J
Lry�I ELECTRIC FANEL,
_r rl •',I ' , TELEPHONE BOARD, \
I IIII II ,' (�(Cor`flAGroK 5wrrcH � \
I II IIII II / /
36" HIGH x 36" (MIN.) WIDE \�dy_ LINE OF EXISTING
HANDICAFFED-ACCESSIBLE \ 51GN 5HE1_F
ECGUN'rEr\IOr ' O F (T`(F 5I -TAPED) ABOVE TO REMAIN
\
II IIII II/ \
L/L_JII __j -_I14 II A2.0 / '----------
_.-----
----------
II IIII II / / 11 11 ry �^-___-7�;<,�, ♦_ \\ \
I II IIII II / / I II II II 11 `�---J
I II IIII II / I II II II I � ,�
L _l l _ _1111
i =__ - _- ___� I 1 I/ �`1:�__'I�IW�'-�I ,�;I rrll I I W 1
-�`_' I ' '' '' (f II III II f•-
I (-____----__, r-
I it
^ i 1---------- I I v I
I_07I II II 11 II II I
I
11 I j
II , LLI
NEW EASE SPACE r-
(\/ �\/\ , ADDI ION
;.,I Ali
I
36" HIGH x 36" (MIN.) WIDE G
HANDICAFFEU-ACCE551BLE A2,U I
COUNTERTOP ('IYf' 5rIAPED) I
1 II
ii HORZ,p I
n IN BA5E Hudson News
I 11 I
u
OUFLEX MOUNTED IN I
u MILLWOKK 0,104" AFF /
A2.0
(TY!". UNLE55 OTHERWISE /
1 NOTED) /
A /
� n
I II A2.G /
L /
DUPLEX FOR COOLER ,
MTD. IN FAKTITION ,
1 I
I
' I,.IGCCCKQZ. i ir-----///- \-___-11 Ir----/ -- ---moi i; ----------
I
--------
L_ �' IL15L I II ( J ) n I / O� II 11 II I / I A3.0
-'I a`I --_ -JI--_-_ -'-- I II v II \��-// II II I IL,
I s� _
15: �^• . `�1 II II II Imo---------- L =[^'
'-I II I II I I I
11 11 it 11 11
,{ 'I
I (I I I' I I I I III I -1\J 1T
�rL---------- '--------- (5 ---------- I IL--------- -II IL--------- II I (hi ��I d j- I
NO.
DATE
REVISION
I
2-22-09
TENANT REVISIONS
A
OUTLETFUK
FUTURE COOLER
I
l �
29'-0" EXI5TING WALL - FIELD VERIFY
R
CONSTRUCTION FLAN
1/4'1:= 1"0.
Hudson News - Hudson booksellers
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
TERMINAL A -INTERNATIONAL DEPARTURES- UPPER LEVEL
ORLANDO SANFO
RD
O
INTERNATI NAL AIRPORT
S FLORIDA
ANFORD
a
E
NOTE: AFTER DEMOLITION, GC AND
MILLWORK CON'rKACrOK 5HALL MEA51LIKE
AND VERIFY 5FACE DIMEN51ON5 AND
LOCATION AND 51ZE EXI5TING NICHES FOR
MILLWORK CLEARANCE REQUIREMEHT5
FRIOR'r0 cON5-rRucrloN
DRAWN DATE
12 -1 -Ob
0
CHECKED JOB NUMBER
0614
CONSTRUCTION
PLAN
FLOOR MATERIAL NOTES
TEMPLATE NOTE:
FLOOR TILE INSTALLATION TO DE LEVEL WITH NO MORE THAN
1/16" VARIANCE IN HEIGHT. G.C. SHALL FIELD VERIFY
CONDITION OF FLOOR FOR LEVELNESS AND/OR
1MFERFECTION5 PRIOR TO 50MITTING DID.
1665 Highway 588
TILE TO DE THIN-5ET. GROUT JOINTS TO DE '10' WIDE (MAX.)
:. ,.
ALL TRAN5rnONS DE-FWEEN TILE AND EXISTING FLOOR
AREAS WITH ABOVE SHADING INDICATES FOOTFKINT
MATERIALS TO DE FLUSH AND SMOOTH,
OF NEW MILLWOKK/FIXTUR.ING THAT DOES NOT RECEIVE
FLOOR TILE. THE G.C. AND MILLWORK CONTRACTOK(5)
PATCH ANY FLOOR FENETRN'ION5 NOT BEING RE -USED TO
SHALL COORDINATE WORK TO INSURE FROFER FIT OF
MATCH EXISTING CONSTRUCTION. MAINTAIN FLOOD;
ALL MILLWORK/FIXTURING WITHIN TENANT'S SPACE
FIKE-KATING5.
FRIOK TO ANY FADRICATION AND INSTALLATION. THE
GC SHALL CLEAN, SAND, FKEF AND FKIME SLAB PER
MILLWORK CONTRACTOR SHALL INSTALL TEMPLATES
STONE TILE MANF. 5FECIFCATIONS FKIOR TO APPLYING
OF THE MILLWORK/FIXTURING 50 THAT THE FLOOR TILE
MEMDKAME.
MAY DE IN5TALLED TO THE TEMPLATES. NO GAPS
DE TWEEN FLOOR TILE AND MILLWORK/FIX-rURING SHALL
PROVIDE EPDXY INJECTION •TRE/ATMEN-r FOR. CRACKS
-THOSE
REMAIN ONCE ALL WORK HAS DEEM INSTALLED,
COMPLETELY THROUGH THE SLAB AND FROM
0.0625 INCH UP TO 0.25 INCH IN WIDTH.
ECD MEMBKANE, SELF-ADHEKING ELA5TOMEKIC SHEET, 40
MILS THICK AS MADE DY N.A.C. PRODUCTS, AKRON, OH, OR
ARCHITECT ACCEPTED EQUAL.
APPLY STONE FLOUR. SEALER FEK MANF.
RECOMMENDATIONS. MIRACLE SEALANT 511 IMFKEGNATOK
FOR SEALER AND 5LIF RESISTANCE.
it
LEASE LINE
LANDLORV5 EXI5TING
FLOORING OR ADJACENT TILE
NEW 5TOF:E TILE
- MAX VARIATION
6E•}'WEEN FINISHED FLOOR
i 5URFACE5 TO DIE -1/16"
®EVIL
FULLSCALE
EXI5TING CONC. FLOOR- G.C. SHALL GRIND AND OR
FEATHER 5LAD IF REOWIRED TO ALLOW FLLJ SH
IN51-AI_LATION OF NEW TILE WITH CONCOUK5E
FLOORING. SLOPE 5HALL NOT EXCEED 1/6" IN ONE
FOOT OF RLJ N (TYPICAL)
EDGE -PROTECTION TRANSITION PROFILE A5 MFD.
5Y "5CHLUT ER" -MODEL. "'Ll 5CHLUTER- 5CHIENE"
FINI51-1 TO BE 5ATIN ANODIZED ALUMINUM #AE 125
VERIFY EXACT HEIGHT REUT) PKIOK TO ORDERING.
ORDER "R" WHEN U5ED FOR RADIU5 APPLICATIONS
ALIGN TOP5 OF TILE TO TILE
OR TILE TO WOOD
EX15-TING CONC. FLOOR- G.C. 5HALL GRIND AND OR
FEATHER 5LAD IF REOUIRED TO ALLOW FLUSH
INSTALLATION OF NEW TILE
EDGE -PROTECTION TKAN5ITION PROFILE A5 MFD. 13Y
"5CHLIJT EP. 5Y5TEM5" -MODEL " 1.1 SCHLUTER-
5CHIENE" FINISH TO 13E 5ATIN ANODIZED ALUMINUM
#AE 125 VERIFY EXACT HEIGHT REQ'D PRIOR TO
ORDERING. ORDER "R" WHEN U5ED FOK RADIUS
APPLICA-TION5
DETAIL
FULL SCALE
METALJN A
ArchiWcrure & Design P.C.
F
1665 Highway 588
:. ,.
�-
Ellisville MS 39 }37
,\
..����� .
...,
. �.
.
: 'f: f
TEL 601.9 14.6909
FAX 601.763.438 6
RMOMti\
\\�
gm
—aw
:.:::......: Aff
....
\... ft es
AMR
ww w M ETA L JNA r I ec
a ch t is co m
:..
...:..::::::::::::.:...;.;.:.:...:.......
3
e_rnl; c-
a I _ _om
til una nin J, Tin
-
THIS DRAWING AS AN INSTRUMENT
OF SERVICE, IS AND SHALL REMAIN
THE PROPERTY OF ARCHITECT.
USE OF THE DRAWING, OR ANY
REPRODUCTION THEREOF, WITHOUT
ITHOUT
THE EXPRESS WRITTEN PERMISSION
C
OF THE DESIGNER ISTRI TLY
5 C
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION O IN DEROGATION OF THIS
ARCHITECTS C S RI GHTS.
COPYRIGHT 2008
CORE DRILL. PENT RATI(
POWER, DATA, AND TE
UNDER CA5HWRAF. D
AND VERIFY EXACT RE,
PLACEMENT IN THE FIE
GENERAL CONTRACTO
X -KAY THE FLOOR 5LA
ANY CU'TT'ING, DRILLIN,
OTHEK PENETKA'nONS
PORT PRIOR TO X-RAY.
NO. DATE REVISION
FLOOR MATERIAL PLAN
•
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
TERMINAL A -INTERNATIONAL DEPARTURES- UPPER
LEVE_
ORLANDO
SANFORD
INTERNATIONAL
AIRPORT
SANO
F RD FLORIDA
DRAWN DATE
12-1-08
CHECKED JOB NUMBER
0514
FLOOR MATERIAL PLAN
[0 14; [W I illi 1�
1. ALL LANDLORD'S EXISTING CEILING FIN15HE5 TO REMAIN, UNLESS O-THERWISE NOTED. ANY AREAS DAMAGED DURING
CONSTRUCTION SHALL BE REPAIRED/REFLACED TO MATCH EXISTING.
2. G.G. TO VERIFY THAT EXISTING STRUCTURE, pUC'TWORK, EQUIPMENT, ETC. DOES NOT INTERFERE WITH NEW FINISHED CEILING
HEIGHTS SHOWN ON CEILING FLAN. G.C. TO NOTIFY TENANT'S KEFKESENTATIVE IMMEDIATELY( IF FINISHED CEILING
HEIGHTS ARE NOT ATTAINADLE,
3. ARCHITECTURAL DRAWINGS SHALL GOVERN THE FLACEMENT OF ITEMS (LIGHT FIXTURES, DIFFUSERS, ETC.) EXPOSED TO
VIEW.
4. ALL DIFFUSERS AND GRILLES -TO DE'WHI-i'E' TO MATCH ADJACENT CEILING COLOR UNLESS NOTED OTHERWISE. THE GC
SHALL VERIFY AND ORDER ALL DIFFUSERS AND GRILLES FRAMES TO COMFATIDLE WITH THE CEILING TYPE IN WHICH EACH
15 INSTALLED,
5. LAY- IN CEILING HANGER WIRES 1-0 DE 9 GA. SOFT ANNEALED MILD STEEL. WIRES SHALL NOT 1 E ATTACHED TO ANY
DUCTWORK, FLUMDING, OR CONDUIT, CONSTRUCTION TO MEET ASTM C655 AND ASTM C636.
6. THE G.C. SHALL DETERMINE THE NUMDEK, LOCATION, AND SIZE OF ANY ACCE55 FANELS REQUIRED IN GYF DD. CEILINGS.
THE ARCHITECT SHALL APFROVE TYPE OF ACCESS PANEL FRIOR TO INSTALLATION,
LIGHT RX"I"URE SCHEDULE
SEE COMPLETE LIGHT FIXTURE SCHEDULE ON SHEET Ea1.0
NO.
SYMBOL
DESCRIPTION
2 X 2 RECE55EO FARADOLIC LOUVER
131
FLUORESCENT LIGHT FIXTURE, 9 CELL
2 X 2 RECESSED FARADOLIC LOUVER
131 EM
FLUORESCENT LIGHT FIXTURE, 9 CELL
WITH SELF CONTAINED EMERGENCY BATTERY
PACK, TEST SWITCH AND INDICATE LIGHT
F1R
Zi
O
6" LINE VOLTAGE COMFACT FLUORESCENT
RECESSED FIXED DOWNLIGHT W/ WHITE BAFFLE
LINEAR FLUORESCENT TS ARCH.
01
FIXTURE W/ INTEGRAL BALLAST AND
FOWER CORD & FLUG ('15 5/31)
02
LINEAR FLUORE5CENT T5 ARCH,
FIXTURE W/ INTEGRAL BALLA5T AND
POWER CORD & FLUG (24 5/51)
03
LINEAR FLUORESCENT TS ARCH.
FIXTURE W/ INTEGRAL DALLA5T AND
POWER CORD & FLUG (36 5/51)
06
LINEAR FLUORESCENT TO ARCH.
FIXTURE W/ INTEGRAL DALLAST AND
FOWEK CORD & FLUG (751/4"L)
®
ARCHITECTURAL EDGE -LIT
X1
EXIT SIGN
NOTE; ALL LIGHT FIXTURES SPECIFIED ARE TO BE PURCHASED BY
THE G.C. THROUGH THE TENANT'S LIGHTING CONSULTANT e CHARLIE.
AND COMPANY, CONTACT VIRGIL @ (309) 605-5043 NOTE. LIGHTS
MUST RE PREPAID BEFORE DELIVERY
THIS DRAWING AS AN INSTRUMENT
OF SERVICE, IS AND SHALL REMAIN
THE PROPERTY OF ARCHITECT.
USE OF THE DRAWING, OR ANY
REPRODUCTION THERE OF, WITHOUT
THE EXPRESS WRITTEN PERMISSION
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION IN DEROGATION OF THIS
ARCHITECTS RIGHTS.
COPYRIGHT 2008
51
51
cc
PI
E>
Lc
CEILING Ir
LAN
1/4" =1'-O"
ADJACENT RESIAURAN I
Hudson News - Hudson Booksellers
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
TERMINAL A -INTERNATIONAL DEPARTURES- UPPER LEVEL
ORLANDO SANFORD
INTERNATIONAL AIRPORT
SANFORD, FLORIDA
11AIN
1
FKOFILE OF'06'
LIGHT FIXTIJKE
FKOFILE OF'06'
LIGHT FIXTURE
FIRE ALARM
5TKODE
MILLWORK "ro DE
MADE REMOVABLE
FOR FUTURE COOLER
(SHOWN 5HAPED)
CORNER TRIM
FLJ
REGIONAL MURAL 5'( I
F -Z.1 AHICOM 51GH5 - MOUNT ON
FFL2 COVEKEP PANEL DY
MILLWORK coNrrKACrOK
f:FC;10HAI2•
4UKAL DY
ANICOM 51GH5
ROMEWill IIS!
KF�IONAL �,
(MURAL EKY
ANICoM 51GN5
WD1
,— tvFr2
v v LEXAN FAN'EL5 FOK v
MAGAZINE COVERS
MOUNT PUFLEX
KECEFTACLE5
0 101" A.F.F
. — --
—CATEGORY - — - --;
— 51 G N AG E77
-- - -- ------
WP1 TO
--. -
II
I --CORNER TRIM
—
LJ -- Ll L
o
II II ► ,
100 I I YlU I_ IIU I J 103
I� 5LATWALL DISPLAY 'I I OPEN FACE COOLER I OPEN FACE COOLER ~I 5LATWALL
(REMOVAPLE) DI5PLAY
RECEFTACLE
AELEVATION MOUNTED YF)
IN BASE (�r(F)
DISPLAY DISPLAY DISPLAY DI5PLAY
RECEFFAGLE
ELEVATIONMOUNTED HO
IN BASE (-r(['))
3/511 R 11-011
2 2 GRAPHIC BY ANICOM
F-4.2 51GN5 - MOUNT ON F-4.2
FL2 COVERED FAHEL BY
MILLWORK CON"rKACFOR
r l f l r I r l —.-.---..._. - -. --. r
_ I I C,
I I 5FINNEK5 -ct-t I -
1I
I
it It I -- ---
�)
5L2 5L2
WDZ
.. I I ------.---_
it I I
�5
L J l J l J L I -- JJ2 -__ L
II I
I 151 I I 16U I 16'I I
h ROOKS PAPYRUS PAPYRUS
F ELEVATION
100
5LATWALL
DI5PLAY
G REGIONAL MURAL FAY
RLWO
F-3.0 AWCOM 51GN5 - MOUMr ON
IIKK FL2 COVEKEP FI,NEL DY
SOFFIT MILLWORK CONTRACTOR
I I I I I I I I I I
1 rl rl
I II II II II
I II II II II
I I I F�I Ci l'I
I II II II II
I II II II II
I II II II � II
I II II II II
I II II II II
I II II � II II
I I I I
W01it-
I I
I II II II II
I II II II �II
I II II II II
I Ir—
J L 1 L J FL1 L J L I
I I �
I I I
1�F1 I Igo I loll I 140
GIFTS GIFTS GIFTS GIFTS
THIS DRAWING AS AN INSTRUMENT
OF SERVICE, IS AND SHALL REMAIN
THE PROPERTY OF ARCHITECT.
USE OF THE DRAWING, OR ANY
REPRODUCTION THERE OF, WITHOUT
THE EXPRESS WRITTEN PERMISSION
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION IN DEROGATION OF THIS
ARCHITECTS RIGHTS.
COPYRIGHT 2008
n
II
II
II
II
II
II
II
II
II
II
II
II
It
i --J
II
II
II
II
II
II
II
II
II
N
II
II
Ll
2
-L-i
103
5LATWALL
DI5PLAY
MOUNT PUFLEX
KECEFTACLE.S
FKOFILE OF'02'
OF' '03' LIGHT
FIXTURE (-r(F)
PROFILE OF'OF5
LIGHT FIXTURE
("rYF)
RECESSED
UITANPAKP
HALF -ROUND
Ivl'rl
HALF-ROIINP
FROFILE OF
'03' LIGHT
FIXTURE
FKOFILE OF'06'
LIGf1"r FIXTURE
(rrF)
KECEF"f'ACLE
— MOUNTED HOKIZ.
IN DA5E (1-(F)
NO.
DATE
REVISION
1
2-22-09
TENANT REVISIONS
ELEVATION
aJ/811 � 11„0,1
MOLMT PUFLEX
KECEf TACLE5
0104'' A,F.F
—CD2
CATEGORY
— _ 510NAGE —
=� �5L2
7v
HALF -ROUND
EXI TING 5OFFIT-
FKEF FOR FAINT F1
_
WD1
N
LD
`-
ri
i
GLI
II
I I
Ili
(5L1
=
I
�
ELEVATION
aJ/811 � 11„0,1
MOLMT PUFLEX
KECEf TACLE5
0104'' A,F.F
—CD2
CATEGORY
— _ 510NAGE —
=� �5L2
7v
HALF -ROUND
EXI TING 5OFFIT-
FKEF FOR FAINT F1
_
�
N
LD
`-
i
1_ J
GIFTS ��' ENCLOSURE �I
Cj ELEVATION
3,811 � 11_011
R TRIM
F-2.0/ `F-2.
NON -ILLUMINATED
51GNAGE FY ANICOM
51GN5
MILLWORK
5OFFI f
PROFILE OF 0'1
LIGHT FIXTURE (-r(F)
IIII - II II
COKNEP TKIM
--m OFEN
_ 5L1
II
—` 1 L J it
I 1U0 _ I 120 I 552
I 5LATWALLNIS- EWS`�
DI5PLAY TOWER
ELEVATION
3/811 .+ 11-011
OFEN
EX
CORNER
1 KIN(
r<
2 LOCAL AUTHOR GRAFHIC BY
F-1%0 ANICOM 51GN5 - MOL1N,r ON
19L2 COVERED FANEL 13Y
MILLWORK CONTRACTOR
II IIII
II IIII
II IIII
II IIII
II IIII
II IIII
II 1111
II IIII
II IIII
I I WU2 I I I
II IIII
II IIII
II IIII
II IIII
II IIII
II IIII
II IIII
II IIII
II IIII
II IIII
II IIII
cc��)
I I JJ2 I I I I
L1 LIL1
lel
BOOK5
ELEVATION
3/811 11-011
Hudson News - Hudson Booksellers
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
TERMINAL A -INTERNATIONAL DEPARTURES- UPPER LEVEL
ORLANDO SANFORD �c�2DSo
INTERNATIONAL AIRPORT
SANFORD, FLORIDA !-�.�.�
ZL
DRAWN DATE
12-1-06
CHECKED JOB NUMBER
ELEVATIONS
M FTAI_U NA
Architecture & Design P.C.
1665 Highway 588
Ellisville, MS 39,137
TEL 601.9 14,6909
FAX 601.763.4886
THIS DRAWING AS AN INSTRUMENT
OF SERVICE, IS AND SHALL REMAIN
'rHE PROPERTY OF ARCHITECT.
USE OF THE DRAWING, OR ANY
REPRODUCTION THERE OF, WITHOUT
THE EXPRESS WRITTEN PERMISSION
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION IN DEROGATION OF THIS
ARCHITECTS RIGHTS.
www. M ETALU NAarchitects,cor n
email: metalunact rnind5pring.com
;< COPYRIGHT 2008
NO.
DATE
REVISION
1
2-22-09
TENANT REVISIONS
1l:I�VN►1
CHECKED
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
UAI r
12-1-06
JOB NUMBER
0814
ELEVATIONS
TERMINAL A -INTERNATIONAL DEPARTURES- UPPER LEVEL
ORLANDO SANFORD
INTERNATIONAL_ AIRPORT
SANFORD, FLORIDA
- . r
ADJACENT 5TORE5 `9
MATERIAL TO REMAIN
THIS DRAWING AS AN INSTRUMENT
OF SERVICE, IS AND SHALL REMAIN.
'rHE PROPERTY OF ARCHITECT.,
USE OF THE DRAWING, OR ANY
REPRODUCTION THERE OF, WITHOUT
THE EXPRESS WRITTEN PERMISSION
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION IN DEROGATION.OF THIS
ARCHITECTS RIGHTS.
COPYRIGHT 2008
WOOD FANEL5 OVER EXI 5TING CURVED 5OFFrr
EX15-TING AIRPORT CEILING
AND 50FFrr
O
- SLUE PAINT EU WAVES
r�� i YP
2
EX15TING 55 CURVED 510N
REVISION
1
�
c9
w
c,
t
M15
rYR
LEDGE -r0 REMAIrl
INDIVIDUAL LE-rTER LEE) FW�
Tyr. MOUNTED 51GN ON EXISTIHOi
mi "
w
-
THIS DRAWING AS AN INSTRUMENT
OF SERVICE, IS AND SHALL REMAIN.
'rHE PROPERTY OF ARCHITECT.,
USE OF THE DRAWING, OR ANY
REPRODUCTION THERE OF, WITHOUT
THE EXPRESS WRITTEN PERMISSION
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION IN DEROGATION.OF THIS
ARCHITECTS RIGHTS.
COPYRIGHT 2008
WOOD FANEL5 OVER EXI 5TING CURVED 5OFFrr
EX15-TING AIRPORT CEILING
AND 50FFrr
O
- SLUE PAINT EU WAVES
r�� i YP
2
OFEN
CORNER
'TRIM
H FRONT ELEVATION
3/8" = 1'-0"
HON-ILLUMINAT EU SURFACE
MOUNTED 51GNAGE - T YR OF
ALL 5 - 51GN5 DY AHICOM
F5 T YF
CORNER
TRIM
r e p7
r
Ivli .�
.� �•: - 4s o l UF:AL MAI LE
:'v:}sr?1r "! ; =<:: > fa ::.:R "• !4°?' :r'<' VENEER,
I `(I' -
L� "`.^R YFf� T nrJ�\^',.��✓j '�..,�.+`-.:,.-.,.:., fr'; `+1k...; +.iF-'"+'n::.: - '"`�i.-' �i�.-,{''f'.-..-�`+r��.��,�•':!.:##;.;,gF�cr:�.F-�%. 1{�::r:;r-"
OPEN TO 5"TORE f;LUE PAINT EU VVAVE5 P5
CORNER
TRIM
� SIDE ELEVATION
A,, 3/811 = 1 1-011
NO.
EX15TING 55 CURVED 510N
REVISION
1
2-22-09
TENANT REVISIONS
rum. vhIMW
M15
rYR
LEDGE -r0 REMAIrl
INDIVIDUAL LE-rTER LEE) FW�
Tyr. MOUNTED 51GN ON EXISTIHOi
mi "
l'IJRVED SIGN 50FFri= SIGN
FAY ANICOM 51GN5
55 5HROUD OVER FLA"r PANEL
AV1
u
- ?
o
015FLAY FEAT-IJRE MAO
FROGRAM
OFEN
CORNER
'TRIM
H FRONT ELEVATION
3/8" = 1'-0"
HON-ILLUMINAT EU SURFACE
MOUNTED 51GNAGE - T YR OF
ALL 5 - 51GN5 DY AHICOM
F5 T YF
CORNER
TRIM
r e p7
r
Ivli .�
.� �•: - 4s o l UF:AL MAI LE
:'v:}sr?1r "! ; =<:: > fa ::.:R "• !4°?' :r'<' VENEER,
I `(I' -
L� "`.^R YFf� T nrJ�\^',.��✓j '�..,�.+`-.:,.-.,.:., fr'; `+1k...; +.iF-'"+'n::.: - '"`�i.-' �i�.-,{''f'.-..-�`+r��.��,�•':!.:##;.;,gF�cr:�.F-�%. 1{�::r:;r-"
OPEN TO 5"TORE f;LUE PAINT EU VVAVE5 P5
CORNER
TRIM
� SIDE ELEVATION
A,, 3/811 = 1 1-011
NO.
DATE
REVISION
1
2-22-09
TENANT REVISIONS
51AINLE55 STEEL.
Hudson News - Hudson booksellers
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
TERMINAL A -INTERNATIONAL DEPARTURES- UPPER LEVEL
ORLANDO SANFORD
INTERNATIONAL AIRPORT
SANFORD, FLORIDA
HEVV GYP b[), OVER EXI51INO
-- FAINr'ED1<) MATCH EX15T1NG
ADJACENT AIRFORT AREA5
1
NEW r)A5E TO MATCH
LANDLORV5 EX1511N0
0
2
DETAIL 3
A3.2 1�(P
111=11-011
! CENTERLINE OF
51UE-FOLDING GRILLE
5 DETAIL
THIS DRAWING AS AN INSTRUMENT
OF SERVICE, IS AND SHALL REMAIN
THE PROPERTY OF ARCHITECT.
USE OF THE DRAWING, OR ANY
REPRODUCTION THERE OF, WITHOUT
THE EXPRESS WRITTEN PERMISSION
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION IN DEROGATION OF THIS
ARCHITECTS RIGHTS.
COPYRIGHT 2008
DU51 PROOF STKIKE
A5 REOL11KED DY
GRILLE MANF, (1-'(F)
TWO 2 Wb" 'TWIN BALL CA"IGH
A5 MANF, BY HAFELE
MODEL#244,20.120
WUI
P5
5IDE FOLDING GRILLE -
VERIFY FOCKET [)EFTH
AND EXACT MODEL T (FE
EXISTING COLIJIvII`I/
ENCI.05UKE
61,
�UD1
NI"l3
MT3
------------------- -------------------
WO 2 3/0" JVVIN DALL.
C CH A5 MANF. B`( WDI
#12L}LLL)Ni� DEL
�t 0
DUST -PROOF STRIKE
A5 REQUIRED DY
GRILLE MANF. (TYP)
CENTEKLI�IE OF
5IDE-FOLDING GRILLE
Cn (rYF)
CONT. CONCEALED LEAF
_ HINGE #21265A, DY
ROTON - VEKIFY FIN151-1
WITI1 ARCHITECT
N
140 141 \
bVD1 PROFILE OF GYF
FSU. 50FFIT' ABOVE
RECE55ED
STANDARD (lYF)
--------------------------------------------------------- l
PROFILE OF
CROWN MOLD 3„ 3
ADOVE A'- 2 c%
c,tirr3 �
----------------------------------------------- \4
C
400
DETAIL
v=11. -O.,
0
�n
�O
AVI
O /
RECE55EU
-161 5-IANDARU (-r(P)
140 1_
--------------------- ------
WD2 '
FROFILE OF
CROWN MOLD
4UD 1 ABOVE
PROFILE OF WD2
FIELD VERIFY 5OFFFr ABOVE
,
5
[DETAIL
NO.
REMOVADI_E 1
MILLWORK °'�
FIELD
r.VER:IFY
I
1-7
2-22-09
TENANT REVISIONS
NO SED
5
_
WD1I
(�v 6DI
IN
COORDINATE AVI I115TALLATION
AND DUPLEX OUTLET LOCA-rION5
FILLER:
WITH TENANT'S REFI
1
�O
AVI
O /
RECE55EU
-161 5-IANDARU (-r(P)
140 1_
--------------------- ------
WD2 '
FROFILE OF
CROWN MOLD
4UD 1 ABOVE
PROFILE OF WD2
FIELD VERIFY 5OFFFr ABOVE
,
5
[DETAIL
NO.
DATE
REVISION
I
2-22-09
TENANT REVISIONS
Hudson News - Hudson Booksellers
. Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RF -TAIL SPACE_ IN
TERMINAL A -INTERNATIONAL DEPARTURES- UPPER LEVEL
ORLANDO SANFORD
INTERNATIONAL AIRPORT
SANFORD, FLORIDA
100
NT 5
DETAIL
111 .+,1^011
MT3
(E
ALL 50135
EXISTING COLUMN/
ENCL05UKE
DU5TFKOOF 51'KIKE
A5 REOUIRED DY
GRILLE MANF. ('r -(F)
CENTERLINE OF
5IDE-FOLDING GRILLE
(.r -(P)
CENTERLINE OF
5IDE-FOLDING GRILLE
(-f (P)
DIJ5TFR00F rRIKE
A5 RE01-JIKED BY
GRILLE MANF. (T -(f)
7
A3.2
•fWO 2 3/5" TWIN DALL CA'
A5 MANF. FSY HAFELE
NI O D E L // 2zI /l .20.12O
W
0
w
Nal
511)E FOLDING GRILLE -
VERIFY POCKET DEPT H
AND EXACT MODEL'TYFE
EXISTING COLUMN/
ENCLO5URE
DRAWN DATE
12-1-08
HECKED JOB NUMBER
U81�T
STOREFRONT PLAN DETAILS
• �l
M ETAI_U NA
Architecture & Design P.C.
1665 Highway 588
Ellisville, M5 39437
TEL 601.9 1 1.6909
FAX 601.763.4886
THIS DRAWING AS AN INSTRUMENT
OF SERVICE, IS AND SHALL REMAIN
THE PROPERTY OF ARCHITECT.
USE OF THE DRAWING,. OR ANY
REPRODUCTION THERE OF, WITHOUT
THE EXPRESS WRITTEN PERMISSION
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION IN DEROGATION OF THIS
ARCHITECTS RIGHTS.
www. M ETALU NAarchitects.com
email metal una(c1bmindsprinG.com
f
COPYRIGHT 2008
NO.
DATE
REVISION
1
2-22-09
TENANT REVISIONS
Iai
1-M11111111
111111
1117r1 1 '
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
DRAWN DATE
12-1-oa
CHECKED JOB NUMBER
0&1 21-
REFRONT SECTIONS
TERMINAL A -INTERNATIONAL DEPARTURES- UPPER LEVEL
ORLANDO SANFORD
INTERNATIONAL AIRPORT
SANFORD, FLORIDA
M ETALU NA
ArchitecLUle & Design P.C.
1665 Hiphway 588
Ellisville, MS 39437
TEL 601,9 14.6909
FAX 601.763.9886
THIS DRAWING AS AN INSTRUMENT
OF SERVICE, IS AND SHALL REMAIN
THE PROPERTY OF ARCHITECT.
USE OF THE DRAWING, OR ANY
REPRODUCTION THERE OF, WITHOUT
THE EXPRESS WRITTEN PERMISSION
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION IN DEROGATION OF THIS
ARCHITECTS RIGHTS.
www. M ETALU NAarcli i tec Ls, corn
email: metal una(cbmindsprin�.corn
COPYRIGHT 2008
NO.
DATE
REVISION
1
2-22-09
TENANT REVISIONS
low
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
ICI'VV
CHECKED JOB NUMBER
U31> -
STOREFRONT DETAILS
TERMINAL A -INTERNATIONAL DEPARTURES- UPPER LEVEL
ORLANDO SANFORD
INTERNATIONAL. AIRPORT
SANFORD, FLORIDA
A-3.2
EVISIO
5URE DRACING
TO U �EFSIDE OF DECK
WrrH715° LONG
POGVEK-D VEN FA5TENER5
924"O -C"- N, X.
ATTACH TOP & DOTTO
TRACK 5 W1 (2) #6x, 7/16 -
FAN HEAD 5CKEW5
ATTACH DKACI NG TO
TOP T RACK W/ (3) —
#6 x 7/16'' PAN HEAD
5CKEW5
EX15T1NG EX&FING
5TKUCTUKE C 5TRUCTIJKE 3 5/6" METAL
5T'U D5 \
UNISTK UT @ 46" 0.C. UNarm G 46" O.C.
5ECURED TO 5ECURED l0 5TKUC rUKE
5TKUCTUKE AGOVE
r ADOVE_______ _
---------------- ---------
p------------
---------------- ---
-------------
3" x 3" x'1/4�" x 2" LONG /// 3" x x 1/4-" x 2" LONG
5TEEL ANGLE 5T F L ANGLE
3" x 3" x 3/6° FLUOR. STRIP
5TKAP HANGER E)TKAP HANGER FIXTURES
FASTENED TO FA5TENED TO 1/4�" DIA. GALVANIZED 5TEEL
5TKUC'rURE iii 5TKUCTUKE HANGER KOD5 00 zI-5" O.C. MAX.
E2
P2
SUSPELI510N CHANNEL
LU
NOT USED
I C 48" O.C. MAX. WIFE CLIP #9
SPRING .5TEEL
CU5TOM ALUM. FRAME
WITH COLORED OK
PATTERNED ACRYLIC
( PANELS A5 MANF, G`(
\ FURRING ANICOM 51GN5- COOOD.
CHANNELS EXACT SOFFIT 5HAFE
0 24" C.C.' WITH 51GN 5HOP
1 UFAWING T'EMPLAT
LAY -IN CEILING 5/8 T(FE X
2'-0" GYP 131).
DETAIL DETAIL THRU LAY -IN CEI
_ _ LING
11/2" =1'-O"
DETAIL DETAIL THRU GYP. BD. CEILING DETAIL
11/2" =110" 1'-0"
_\ A A A 1 1/2"=
THIS DRAWING AS AN INSTRUMENT
OF SERVICE, IS AND SHALL REMAIN
THE PROPERTY OF ARCHITECT.
USE OF THE DRAWING, OR ANY
REPRODUCTION THERE OF, WITHOUT
THE EXPRESS WRITTEN PERMISSION
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION IN DEROGATION OF THIS
ARCHITECTS RIGHTS.
COPYRIGHT 2008
NO.
DATE
REVISION
1
2-22-09
TENANT REVISIONS
m
5ECUKE 5RACING \ UNI5r- 'i 5ECUKED
TO UNDEK50E OF DECK _z TO I Cr, 0 24" OC
WITH MIN, 7/6" LONG
POWER-DKIVEN FA5, 7NEK5
0 24" O.C. MAX.
1/4" DIA, GALVANIZED
51 -EEL HANGER KOD,
J'-0" AFF
LED FLEX
IDLE STRIP
COVE LIGHTING ON
METAL 5-rUD DLO(: A5 GYP. DD. SOFFIT
REM) GY ANIC 1 -PAINT P2
51GN5- COLO : WHITE
2 TAIL
1 1I2 =1 a-®ee
hNDER5IDE OF
EXI5TING DECK
ATTACH TOP & DOTTOM
T KACK5 W/ (2) 97x'1116"
PAN HEAD 5CFEW5
ATTACH DRACING TO
TOP TRACK W/ (3)
// 7 x 7/16" I'A N 1-1 EA I)
5CKEW5
NOT USED
VERTICAL & ANGULAR
GRACING V 4b'' O.C. MAX. -
DRACING 51ZE & GAUGE
TO DE EQUIVALEHTTO5TUD
9'-6" AFF
LED FLEXIDLE 51
COVE LIGHTING ON
METAL 51 IJD hL.00Y A5
REM) DY ANICOM
51G1\15- COLOR WHITE
0 �rkr
----- ---._. -0" AFF
C YI'. DD. 5OFFIT
N'f F2
1'-0"
FIRE CAULK A5 REM) TO
UNDER5IDE OF DECK TO
MAINTAIN ONE HOUR FIRE
EATING
5ECUKE GRACING TO
IJNDEK5IDE OF DECK WITH
MIN. 716" LONG POWER -
DRIVEN FA5TENEKS Ca
24" O.C. MAX.
VERTICAL & ANGULAR
DRACING C60 46" O.C. MAX.
- DRACING 51ZE & GAUGE
TO 13E EQUIVALENT TO
5TU D
RE'FEK'r0 CON5•rKUCrION
DRAWING5 FOR CEILING
HEIGH'r & TYPE
I
� I
I I
I �
r� 5/8" T`(PE'X' GYP DD.
I
� I
- I
3 516", 20 GA. METAL
5TUD5 0o 16" O.C.
TOP & GOTTOM TKACK
51ZE & GAUGE TO GE
EQUIVALENTT•0 5TUD5
5ECUKE BOTTOM TRACK
21-01' I 0 _ ATTACH TOP & DOTTOM MINILI
25/4" LONG PO WER-
rRACK5 W/ (2) #7 x 7/'16" DRIVEN FA5TENER5 C
PAN HEAD 5CREW5 24" O.C.
Hudson News - Hudson booksellers
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
TERMINAL A -INTERNATIONAL DEPARTURES- UPPER LEVEL
ORLANDO SANFORD
INTERNATIONAL AIRPORT
SANFORD, FLORIDA
DETAIL NON -RATED NON -REARING PARTITION
1"=V-0"
1
Ca) 46" O.C. MAX.
WIFE CLIP' #9
5FRING 5TEEL
ATTACH TOP & Dar rOM
T KACK5 W/ (2) #8 x 7/16''
'
FURRING CHANNELS<
PAN HEAD 5CKEW5
0 24" O.C.
5U5PENSION CI�IANNE
Cal 4 b" O.C. MAX.
f\
VEK,rICAL & ANGULAR
4
CjKACING (0 46" O.C. MAX.
L3KACIf JCi SIZE & �iAUGE
..
TO GEEQUIVALENT TO
5'ru D
NOT
1 4m.
USED-
10'- 1" AFF `
(
ATTACH C3KACING TO
�2�
TOP TRACK W/ (3)
o
#5REWS PAN HEAD
J'-0" AFF
LED FLEX
IDLE STRIP
COVE LIGHTING ON
METAL 5-rUD DLO(: A5 GYP. DD. SOFFIT
REM) GY ANIC 1 -PAINT P2
51GN5- COLO : WHITE
2 TAIL
1 1I2 =1 a-®ee
hNDER5IDE OF
EXI5TING DECK
ATTACH TOP & DOTTOM
T KACK5 W/ (2) 97x'1116"
PAN HEAD 5CFEW5
ATTACH DRACING TO
TOP TRACK W/ (3)
// 7 x 7/16" I'A N 1-1 EA I)
5CKEW5
NOT USED
VERTICAL & ANGULAR
GRACING V 4b'' O.C. MAX. -
DRACING 51ZE & GAUGE
TO DE EQUIVALEHTTO5TUD
9'-6" AFF
LED FLEXIDLE 51
COVE LIGHTING ON
METAL 51 IJD hL.00Y A5
REM) DY ANICOM
51G1\15- COLOR WHITE
0 �rkr
----- ---._. -0" AFF
C YI'. DD. 5OFFIT
N'f F2
1'-0"
FIRE CAULK A5 REM) TO
UNDER5IDE OF DECK TO
MAINTAIN ONE HOUR FIRE
EATING
5ECUKE GRACING TO
IJNDEK5IDE OF DECK WITH
MIN. 716" LONG POWER -
DRIVEN FA5TENEKS Ca
24" O.C. MAX.
VERTICAL & ANGULAR
DRACING C60 46" O.C. MAX.
- DRACING 51ZE & GAUGE
TO 13E EQUIVALENT TO
5TU D
RE'FEK'r0 CON5•rKUCrION
DRAWING5 FOR CEILING
HEIGH'r & TYPE
I
� I
I I
I �
r� 5/8" T`(PE'X' GYP DD.
I
� I
- I
3 516", 20 GA. METAL
5TUD5 0o 16" O.C.
TOP & GOTTOM TKACK
51ZE & GAUGE TO GE
EQUIVALENTT•0 5TUD5
5ECUKE BOTTOM TRACK
21-01' I 0 _ ATTACH TOP & DOTTOM MINILI
25/4" LONG PO WER-
rRACK5 W/ (2) #7 x 7/'16" DRIVEN FA5TENER5 C
PAN HEAD 5CREW5 24" O.C.
Hudson News - Hudson booksellers
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
TERMINAL A -INTERNATIONAL DEPARTURES- UPPER LEVEL
ORLANDO SANFORD
INTERNATIONAL AIRPORT
SANFORD, FLORIDA
DETAIL NON -RATED NON -REARING PARTITION
1"=V-0"
1
T- --:1- _ - -
/J-/ Y 190
X67
` :1-10
4n —
r
KIDD
�3rj l r
_-__ l b Q:E]
4 I Hudson Booksellers // /l l ::::J:::/ 13(30'
/ // � -----_...::......... � 375 I LI]
300 .
app
4— /
_ / 1
151 190 1
/ 1
1TAN — — — - -
300 _ I
230
3 POS I •
o ; CASHWRAP I
o II
I
_ 1
CLI F]
300 I --
l DVD �I
\ GONDOLA
Hudson News
( 300 300 30U ....`:: / `300I
`� ---
CMILLWORKER TO VERIFY WITH TENANT REP. ANY FIXTURES THAT ARE EXISTING AND NOT REQ'D
o � /
----.----------------------------------- lU0 000:
e '110 '1 '10 _- `n
103 '100 �j '103 rY � H
I I c�
110 N
.4 C%
o-
i
l
FIXTU R E PLAN
HUDSON INEVIIS / BOOKSELLERS FIXTURE SCHEDULE
N®. ITEM FINISH REMARKS
�2 "1/2" WIDE
100 SLATWALL�DI5PL/;r ALL WOOD SHALL BE WO -1 AND SLA'T4VALL. 5L. -I SEE DETAILS -SHEET F-2.0
51" NIDE
103 SLA'TWALL DISPLAY ALL WOOD hl -TALL UE BUD -"1 AND 5l_Ar4VALL SL=1 SEE UE -TAILS - SHEET E-2,0
f�EF'RIG. CASE ALL WOOD SHALL BE WD -1 SEE DETAILS -SHEET F -2."I
110 ENGL05URE
120 �1E4V5PAPER TOWER ALL WOOD SNALL DE WD -1 SEE DETAILS - SNEET F-2,2
ELEC''rRIC PANEL DOOR / ALL WOOD SHALL BE WD -1 AND 5L-1 SEE DFlrll_5 - SNFFT F-�.l
130 SLATWALLUISPLAY
'140 `>•8" REGIONAL GIF'r5 ALL WOOD SHALL BE 4VU-1 AND FGF -1 SEE•. DETAILS - SHEET F-3.0
DISPLAY
2=f-" REGIONAL GIF'r5 ALL 4V000 SNALL Bk WP -1 AND FCP-1 SEE DETAILS - SNEE"r F-3.0
111 UISPLA'(
150 36" BOOK DISE LAY FIXTURE ALL WOOD SHALL BE WD -2 5EE DE1%,ILS - SNEF r F-�1.0
151 42" F30OK DISPLAY FIXTURk ALL WOOD SHALL BE WP -2 SEE DETAILS - SNFEr F-�f.0
160 PAPYRUS 5I'INNER FIXT URE ALL WOOD .SNALL BE WD -2 SEE DETAILS - SNEET F-�-.2
161 PA('YRlJS DISPLAY FIXTURE ALL WOOD SHALL FE WP -2 ANP 5l_A"rWALL SL -2 5EE DEIV,ILS - SI-IEE�r f�-�.2
190 BOOKS CUSTOM ALL WOOD SHALL BE WD -2 AND SLAT WALL 5L-2
5LAT4VALL DISPLAY
230 3 POS CASN4VRAP ALL WOOD 5f -TALL DE WD -'1 AND COCZIAN SS -'1 SEE Uk�rAILS - SHEET F-2.�i
AND F -2A
300 PIf�IWHEEL GONDOLA ALL WOOD SHALL BE 4VD-1 AND 5LAI�VALL 5L-1 SEE DETAILS - 5f -IFFY F-2.5
l SET IS EXIS-TING TO 6E USED
2 - :"� I�l�-WO�If"��\1=J-,L��TD-SI,A�" - - � -- - '�
UNIT IS EXISTING 10 BE USED
350 MOBILE MAGAZINE UNIT EXISTING UNIT Al WATERFALL BARRICADE r0 C'�k USED PROVIDED t3Y l E'NAN r
352 MOBILE CAFIUY UFII'f EXISTING UNI�r AT WATERFALL BARFJCADE T'0 BE USED PCZUVIUEU �Y �rENANT
355 MOBILE NEWS UNIT EXISTING UNIT AT E'�ARKICADE TO BE IJSEU PROVIDED BY -TENANT .
2 SET REQUIRED TO BUILD
360 NESTED TABLE' 2 SE"r5 EXI�rING "rU BE USED
ALL WOOD SNALL BE WP -1 SEE DETAILS - SHEET F-2.FJ
371 BOOK'!'ABL.E ALL WOOD SNALL BE WP -2 SEE DETAILS - 51-I�F'r F-�.l
72X3U
375 FRONT AND CENTER ALL WOOD SHALL BE WD -2 TYP. UNIT
BOOK D15PLA'(
UVU GONDOLA ALI_ WOOD 5{ -TALL BE WD -2 DESIGN
HARDWARE -CASHWRAP
N0.
MFG.
QTY.
CAT. N0.
DESCRIPTION
CBM INDUS'iRIES
1 76a
RHOMBUS FURNITURE FIXED CASTOR FETHERED
II8II.71 7."L831
HAFELE
1 51.00.31 1
ME'T'AL FLUSH HANDLES -STEEL MATTE BLACK
IIOU.4L"3.3531
244.20.120
TWIN BALL CATCH
422.88.946
PRECISION BALL BEARING SLIDES -FULL EXTENSION
TYPE 1
H -SERIES HINGE
HAOE(t COMPANIES
780-224HD
RUTON CONCEALED LEAF HINGE WITH BALL CATCH
800.L55.3590
S'�YLMARI<
110008
TRACK HEADER
800.3L8.2�}95
0'LO
FINISH COLOR
1101 78
SECURITY BUTTOM'fRACI<
020
FINISH COLOR
URA4VING
AVAILABLE FROM SUREWOOD
T- --:1- _ - -
/J-/ Y 190
X67
` :1-10
4n —
r
KIDD
�3rj l r
_-__ l b Q:E]
4 I Hudson Booksellers // /l l ::::J:::/ 13(30'
/ // � -----_...::......... � 375 I LI]
300 .
app
4— /
_ / 1
151 190 1
/ 1
1TAN — — — - -
300 _ I
230
3 POS I •
o ; CASHWRAP I
o II
I
_ 1
CLI F]
300 I --
l DVD �I
\ GONDOLA
Hudson News
( 300 300 30U ....`:: / `300I
`� ---
CMILLWORKER TO VERIFY WITH TENANT REP. ANY FIXTURES THAT ARE EXISTING AND NOT REQ'D
o � /
----.----------------------------------- lU0 000:
e '110 '1 '10 _- `n
103 '100 �j '103 rY � H
I I c�
110 N
.4 C%
o-
i
l
FIXTU R E PLAN
HUDSON INEVIIS / BOOKSELLERS FIXTURE SCHEDULE
N®. ITEM FINISH REMARKS
�2 "1/2" WIDE
100 SLATWALL�DI5PL/;r ALL WOOD SHALL BE WO -1 AND SLA'T4VALL. 5L. -I SEE DETAILS -SHEET F-2.0
51" NIDE
103 SLA'TWALL DISPLAY ALL WOOD hl -TALL UE BUD -"1 AND 5l_Ar4VALL SL=1 SEE UE -TAILS - SHEET E-2,0
f�EF'RIG. CASE ALL WOOD SHALL BE WD -1 SEE DETAILS -SHEET F -2."I
110 ENGL05URE
120 �1E4V5PAPER TOWER ALL WOOD SNALL DE WD -1 SEE DETAILS - SNEET F-2,2
ELEC''rRIC PANEL DOOR / ALL WOOD SHALL BE WD -1 AND 5L-1 SEE DFlrll_5 - SNFFT F-�.l
130 SLATWALLUISPLAY
'140 `>•8" REGIONAL GIF'r5 ALL WOOD SHALL BE 4VU-1 AND FGF -1 SEE•. DETAILS - SHEET F-3.0
DISPLAY
2=f-" REGIONAL GIF'r5 ALL 4V000 SNALL Bk WP -1 AND FCP-1 SEE DETAILS - SNEE"r F-3.0
111 UISPLA'(
150 36" BOOK DISE LAY FIXTURE ALL WOOD SHALL BE WD -2 5EE DE1%,ILS - SNEF r F-�1.0
151 42" F30OK DISPLAY FIXTURk ALL WOOD SHALL BE WP -2 SEE DETAILS - SNFEr F-�f.0
160 PAPYRUS 5I'INNER FIXT URE ALL WOOD .SNALL BE WD -2 SEE DETAILS - SNEET F-�-.2
161 PA('YRlJS DISPLAY FIXTURE ALL WOOD SHALL FE WP -2 ANP 5l_A"rWALL SL -2 5EE DEIV,ILS - SI-IEE�r f�-�.2
190 BOOKS CUSTOM ALL WOOD SHALL BE WD -2 AND SLAT WALL 5L-2
5LAT4VALL DISPLAY
230 3 POS CASN4VRAP ALL WOOD 5f -TALL DE WD -'1 AND COCZIAN SS -'1 SEE Uk�rAILS - SHEET F-2.�i
AND F -2A
300 PIf�IWHEEL GONDOLA ALL WOOD SHALL BE 4VD-1 AND 5LAI�VALL 5L-1 SEE DETAILS - 5f -IFFY F-2.5
l SET IS EXIS-TING TO 6E USED
2 - :"� I�l�-WO�If"��\1=J-,L��TD-SI,A�" - - � -- - '�
UNIT IS EXISTING 10 BE USED
350 MOBILE MAGAZINE UNIT EXISTING UNIT Al WATERFALL BARRICADE r0 C'�k USED PROVIDED t3Y l E'NAN r
352 MOBILE CAFIUY UFII'f EXISTING UNI�r AT WATERFALL BARFJCADE T'0 BE USED PCZUVIUEU �Y �rENANT
355 MOBILE NEWS UNIT EXISTING UNIT AT E'�ARKICADE TO BE IJSEU PROVIDED BY -TENANT .
2 SET REQUIRED TO BUILD
360 NESTED TABLE' 2 SE"r5 EXI�rING "rU BE USED
ALL WOOD SNALL BE WP -1 SEE DETAILS - SHEET F-2.FJ
371 BOOK'!'ABL.E ALL WOOD SNALL BE WP -2 SEE DETAILS - 51-I�F'r F-�.l
72X3U
375 FRONT AND CENTER ALL WOOD SHALL BE WD -2 TYP. UNIT
BOOK D15PLA'(
UVU GONDOLA ALI_ WOOD 5{ -TALL BE WD -2 DESIGN
HARDWARE -CASHWRAP
N0.
MFG.
QTY.
CAT. N0.
DESCRIPTION
CBM INDUS'iRIES
1 76a
RHOMBUS FURNITURE FIXED CASTOR FETHERED
II8II.71 7."L831
HAFELE
1 51.00.31 1
ME'T'AL FLUSH HANDLES -STEEL MATTE BLACK
IIOU.4L"3.3531
244.20.120
TWIN BALL CATCH
422.88.946
PRECISION BALL BEARING SLIDES -FULL EXTENSION
TYPE 1
H -SERIES HINGE
HAOE(t COMPANIES
780-224HD
RUTON CONCEALED LEAF HINGE WITH BALL CATCH
800.L55.3590
S'�YLMARI<
110008
TRACK HEADER
800.3L8.2�}95
0'LO
FINISH COLOR
1101 78
SECURITY BUTTOM'fRACI<
020
FINISH COLOR
PHIS DRAWING AS AN INSTRUMENT
OF SERVICE, IS AND SHALL REMAIN
THE PROPERTY OF ARCHITECT.
USE OF THE DRAWING, OR ANY
REPRODUCTION THERE OF, WITHOUT
THE EXPRESS WRITTEN PERMISSION
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NU'I TO BE CONSTRUED AS
PUBLICATION IN DEROGATION OF THIS
ARCHITECTS RIGHTS.
;. COPYRIGHT 2008
NO. DATE REVISION
I 2-22-09 TENANT REVISIONS
Hudson News
-Hudson Booksellers
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
TERMINAL A _INTERNATIONAL DEPARTURES- UPPER LEVEL
ORLANDO SANFOR®
INTERNATIONAL AIRPORT
SANFORD, FLORIDA
F�GFI
SII
TIL
W =1'_O„
G I-0
------ �-.-/-SCJ----
(2) 1/6" Tl lICK
KENIOVA DLE
LEXAN FANEL5
- REAR i'ANEL
TO 13E DLACK
LEXAN, FKONT
FANEL TO 13E
CLEAK
)E - FURNI5I IED
VIDE
O
I
6/4" 21/2" 5/4"
5 D ETA
3" =1'-O„
21/2" 3'-61/2"CY 100 21/2"
'Y' (cU I U3
IL
3
m
ALAN
11/2„ =1,_®„
THIS DRAWING AS AN INSTRUMENT
OF SERVICE, IS AND SHALL REMAIN
THE PROPERTY OF ARCHITECT.
USE OF THE DRAWING, OR ANY
REPRODUCTION THERE OF, WITHOUT
THE EXPRESS WRITTEN PERMISSION
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION IN DEROGATION OF THIS
ARCHITECTS RIGHTS.
COPYRIGHT 2008
JL1 5CKEWED 10
FIRE -KATE) FL`(WOOD
WITH CONCEALED FLAT
HEAD 5CREW5
DAKREL DOLT - FROVIPE
HOLE IN DA -5E TO ACCEFT
DOLT
�Wm
LDOLT5TOF&
M
FIXTIJKE'06
5/4" x 5/4" x'1/8'I
vIUM ANGLE
"5T'(LMAKf TRIM MAKEK
HALF-KOUNP #110200 &
13A5E #41044.3 WITH 5ArlN
ALUMINIUM FIN15H #020.
FKOVIPE MITERED ANP FKE-
KADIU5E1) CORNER5 A5
NECE55ARY
FIKE-KArED
DL.00KING (-
I
I
I
I I
l
FLJ2LJ
i
I I
I I
I I
I I
I I
I I
I I
I I/
I I
I I
I I
I I
I I
I I
I I
I �
I I
I I
I I
I I
I I
FL -1
FIKE-KATE)
DLOCKING (TYI')
2 SECTION
11/211 = 11^0
11
NO.
DATE
REVISION
I
2-22-09
TENANT REVISIONS
LU
G
I I
I I
I I
I
I I
I I
I I
I
I I
I I
I I
I I
I I
I I
I
I I
I I
I I
I I
I �r
I
I I
I I
I I
I I
I I
I I
I I
I I
I I
I I
I �
I I
I I
21/2" 51/=`
I I'
I I
I I
I I
r �I�
I I
I I
I I
11/2"
WD1
WD1
SURFACE MOUNTED DIJFLEX
KECEF-rACLE ON EXI5TING
WALL. -SEE EI-EVAHON5 FOF:
LOCArI ON
(2)'1/6" THICK REMOVADLE
LEXAN 1;'ANEL5 - REAR r'ANEL
TO DE DLACK LEXAN, FRONT
1'ANEL. TO DE CLERK
DAKKEL [SOLI'- FROVIDE
HOLE IN VALANCE TO ACCEFF
DOLr
FKOFILE OF LIGHT
FIXT IJKE'06' MOUNTED
VERTICALLY IN AN
- 5EE'LIGHTING
SCHEDULE'
5L1 5CREVVED TO
FIRE -RATED FLYWOOD
WITH CONCEALED FLAT-
IIEAP SCREW5
DARKE L DOD'- PROVIDE
HOLE IN DA5E TO ACCEPT -
DOLT
Mr
"5r(LMAKK" TRIM MAKER
HALF -ROUND 1/110200 &
DA5E #41O PIS 5 VVITH SATIN
ALUMINUM FIN15H ##020.
FROVIDE MITERED AND F'KE-
RAPIU5ED CORNEK5 A5
NECE55ARY
1 ELEVATION
11/2" = f-0"
Hudson News - Hudson Booksellers
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
TERMINAL A -INTERNATIONAL DEPARTURES- UPPER LEVEL
ORLANDO SANFORD
INTERNATIONAL AIRPORT
SANFORD, FLORIDA
I I !
DRAWN DALE
12 -1 -Oa
CHECKED JOB NUMBER
_ os1�1-
SLATWALL DISPLAY
j
ME:
1
I
11 /2"
FIRE -RATED
DI-OCKING C
PL'1
FIRE-KATED
BLOCKING (TYP)
l'-7'1/4"
WD'I
'I'-0"
Affilk
SECTION
11/2" -1'-0°
AG P'1
WD1
LOCAL INTEKE5T'GKAPHIC
DY ANICOM 51GN5-
MILLVVOF:K CONTRACTOR TO
I'KOVIDE WHITE PLAM, A5
13AGKGKOUND FOR MURAL
P L'I
1 '1/2''
THIS DRAWING AS AN INSTRUMENT
OF SERVICE, IS AND SHALL REMAIN
THE PROPERTY OF ARCHITECT.
USE OF THE DRAWING, OR ANY
REPRODUCTION THERE OF, WITHOUT
THE EXPRESS WRITTEN PERMISSION
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION IN DEROGATION OF THIS
ARCHITECTS RIGHTS.
<: COPYRIGHT 2008
PROFILE OF
COOLER
FUTUKE GDM 4!
291/2" X 51"
110
2 PLAN SECTION
NO. DATE I REVISION
11/2" = 1'-011
Hudson News - Hudson Booksellers
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
TERMINAL A -INTERNATIONAL DEPARTURES- UPPER LEVEL
ORLANDO SANFORD
INTERNATIONAL. AIRPORT
SANFORD, FLORIDA
•
I I
�—
DAKKEL DOLT - PROVIDE
HOLE IN VALANCE TO ACCEPT
i
I
I I
I I
I I
I
I I
I I
I I
I I
hOL-F
I I �
I I
NOTE:
KOUT COKE) & PLUG FOK LIGHT
I I
FIXTUKE5'01','02','03', AND'06
TO KECEPTAG'LE -CONCEAL
-
VVD1 IN MILLWORK
I I
I I
I I
I I
I
I I
I I
I
I I
NOTE:
THIS IS TO PE A REMOVABLE
DISPLAY SECTION GUILT WITHIN A
I
GDM 45 ENCLOSURE FOR A
I I
I I
I
FUTURE COOLER
I I
I I
I
I I
I I
I I
I I
I I
I I
I I
I I
I I
nl
PROFILE OF LIGHT
FIXTURE'06 MOUNTED
I I
VERTICALLY IN FIN
I �
- 5EE'LIGf-MING
I I
SCHEDULE'
I I
I I
I I
2
I I
I I
I I
I I
5L1 SCKEWED TO
FIKE-KATED PLYWOOD
—'
-
WITH CONGEALED FLAT -
HEAP 5CKEW5
I I
I I
I I
I I
I I
I I
I I
I I
I I
I I
I I
DARREL DOLT - PROVIDE
—
'
I I
HOLE IN DA5E TO ACCEPT
1/2"
131/4"
DOLT
MT'I
I 1
I I
--
'51YLMAKK"'TRI1vI MAKER
HALF -ROUND #110200 &
BA5E #410443 WITH SATIN
ALUMINUM FIN15H #020,
PKOVIDE miTERED AND PKE-
�, RADIUSED CORNEK5 A5
NECE55AKY
-
L
.em
P L'I
1 '1/2''
THIS DRAWING AS AN INSTRUMENT
OF SERVICE, IS AND SHALL REMAIN
THE PROPERTY OF ARCHITECT.
USE OF THE DRAWING, OR ANY
REPRODUCTION THERE OF, WITHOUT
THE EXPRESS WRITTEN PERMISSION
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION IN DEROGATION OF THIS
ARCHITECTS RIGHTS.
<: COPYRIGHT 2008
PROFILE OF
COOLER
FUTUKE GDM 4!
291/2" X 51"
110
2 PLAN SECTION
NO. DATE I REVISION
11/2" = 1'-011
Hudson News - Hudson Booksellers
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
TERMINAL A -INTERNATIONAL DEPARTURES- UPPER LEVEL
ORLANDO SANFORD
INTERNATIONAL. AIRPORT
SANFORD, FLORIDA
•
3
THIS DRAWING AS AN INSTRUMENT
OF SERVICE, IS AND SHALL REMAIN
THE PROPERTY OF ARCHITECT.
USE OF THE DRAWING, OR ANY
REPRODUCTION THERE OF, WITHOUT
THE EXPRESS WRITTEN PERMISSION
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR.
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION IN DEROGATION OF THIS
ARCHITECTS RIGHTS.
COPYRIGHT 2008
H01_E5 IN SIDE FANEL5
TO ACGEFT SHELF FIN5
(TYF)
ADJU51-A[3LE 5HELF
ON 511ELF FIN5
DARREL DOLT - FKOVIDE
HOLE IN 13A5E TO ACGEFT
E3OL"I' ("iYF)
NO. DATE REVISION
11/2" = p-0"
FIRE -RATED Ivi\4
DLOCKING (l -(I') SIJRFAGE MOUNTED DUFLEX
RECEFTAGLE ON EX15T ING
TVVALL -5EE ELEVATIONS FOR
1-- I LOCATION
2) '1/a" THICK REMOVA13LE
EXAN FAHEL5 - REAR FANEL
'0 DE BLACK I_EXAN, FRONT
'AHEL TO 13E CLEAR
SARREL 13OLT- FROVIDE
iOLE IN VALANCE TO ACGEFT
50 L.T
'ROFILE OF LIGHT
=1XTIJRE '01' - 5EE
;EILING FI -AH (TYI')
" THICK ADJU5TA[3LE 5HE1_F
VITH HARDWOOD EDGE5 ON
SHELF FIN5 W/ 5AT IN
,IICKEL FIN1511 ('h(F)
NOTE:
ROUT CORD & PLUG FOR LIGHT
FIXT UKE5'01','O2','05', AND'06'
0 0 1-0 RECEPTACLE -CONGEAL
IN MILLVVORK
CS)o o ' 71
2 SECTION
11/2" ^ V-0"
Hudson News - Hudson Booksellers
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
TERMINAL A -INTERNATIONAL DEPARTURES- UPPER LEVEL
ORLANDO SANFORD
INTERNATIONAL AIRPORT
SANFORD, FLORIDA
-IOLE5 2" O.C. VERTICALLY
0 ACCEF-r SHELF 12IN5
5TAIH IN51UE OF HOLES
-0 MATCH ADJACENT
'AREA
5L1 5CREWEU TO
=1KE RA"F'ED PLYVVOOD -`
Vrm CONCEALED FLAr-
-IEAP 5CREW5
2ROFI1-E OF LIGHT
=IXTURE'06MOUNTED
/ERTICALLY IN FIN
• 5EE'LIGHT1NG
SCHEDULE'
3ARREL DOLT - FKOVIDE
-]OLE IN DA5E TO ACCEPT
3OLT
5TYL.MARK" TRIM MAKER
-IALF-ROUND #110200 &
3A5E #4104IZ WITH 5Arw
ALUMINUM FIN15H #020.
'ROVIUE MITERED AND FRE-
�AUIU5ED CORNERS A5
\1ECE55AKY
11/211 ^ 11-011
i
34"'HIGH H.C.
TRANSACTION
COUNTERTOP
PLAN
1/2" =1'�O°
1 U"W X 22" H FIRE EXTINGUISHER
NICHE WITH SIGN ABOVE
SS1 FINISH
.n
AXONOMETERIC- 3 POS, CASHWRAP
ELEVATION
1/2" =1'-0.,
7 ELEVATION
1/2"=1-0'
WD1
FL1
WD1
rAT2
4 ELEVATION
1/2" =1-0"
THIS DRAWING AS AN INSTRUMENT
OF SERVICE, IS AND SHALL REMAIN
THE PROPERTY OF ARCHITECT.
USE OF THE DRAWING, OR ANY
REPRODUCTION THERE OF, WITHOUT
THE EXPRESS WRITTEN PERMISSION
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION IN DEROGATION OF THIS
ARCHITECTS RIGHTS.
COPYRIGHT 2008
8 ELEVATION
1/2" =1'-O"
NO. DATE REVISION
2-22-09 TENANT REVISIONS
ELEVATION
1/2;, =1? 0"
r6
F-2.4
6 ELEVATION
1/2 =1'-0"
J�-pu
—tiT
I J
I I
I 1
-I
� _ r
_ I W1
1; - 1W[11U\
9 ELEVATION
1/2" = 11-0"
PL1
230
3 POSITION CASHWRAP
DRA ATE
Hudson N ® Hudson Booksellers
CHECKED JOB NUMBER
Papyrus I 0b14-
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN 3 POS CASHWRAP
TERMINAL A -INTERNATIONAL DEPARTURES UPPER LEVEL
ORLANDO SANFORD FEW,
INTERNATIONAL AIRPORT EV
SANFORD, FLORIDA-�,
ELEVATION
1/2;, =1? 0"
r6
F-2.4
6 ELEVATION
1/2 =1'-0"
J�-pu
—tiT
I J
I I
I 1
-I
� _ r
_ I W1
1; - 1W[11U\
9 ELEVATION
1/2" = 11-0"
PL1
230
3 POSITION CASHWRAP
DRA ATE
Hudson N ® Hudson Booksellers
CHECKED JOB NUMBER
Papyrus I 0b14-
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN 3 POS CASHWRAP
TERMINAL A -INTERNATIONAL DEPARTURES UPPER LEVEL
ORLANDO SANFORD FEW,
INTERNATIONAL AIRPORT EV
SANFORD, FLORIDA-�,
� _ r
_ I W1
1; - 1W[11U\
9 ELEVATION
1/2" = 11-0"
PL1
230
3 POSITION CASHWRAP
DRA ATE
Hudson N ® Hudson Booksellers
CHECKED JOB NUMBER
Papyrus I 0b14-
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN 3 POS CASHWRAP
TERMINAL A -INTERNATIONAL DEPARTURES UPPER LEVEL
ORLANDO SANFORD FEW,
INTERNATIONAL AIRPORT EV
SANFORD, FLORIDA-�,
9 ELEVATION
1/2" = 11-0"
PL1
230
3 POSITION CASHWRAP
DRA ATE
Hudson N ® Hudson Booksellers
CHECKED JOB NUMBER
Papyrus I 0b14-
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN 3 POS CASHWRAP
TERMINAL A -INTERNATIONAL DEPARTURES UPPER LEVEL
ORLANDO SANFORD FEW,
INTERNATIONAL AIRPORT EV
SANFORD, FLORIDA-�,
2" BLACK F'LAST IC
GROMMETTO 13 GL:I
PLACED IN FIELD AND
COORDINATED WITH
TNA
J �:I
E N ra E_ JI( MEN -
T
r
�o
VAfI E5
Q\1
551 � ----- � ----- ^
' I
VAEIES
1/4" CLEAR LEXAN II
ANGLED DIVIDERS f
WITH F'OLI5FIED AND
EASEDEDGE5
GC TO COORDINATE
ALL POWER AND
DATA REOIJIREMENT _
Wrrf1 TENANT KEK o
ILI
SECTION
11/2" = 11
'0"
f'L"1 'rEKKY HINGE
HO8-99E60
2'-8 3/4" 2"
SS"I f�
114
"HEFELE"
KECE55ED FULL
1/2' - - _ 1/2" TYPICAL
N ....
CU
---- - - - - - -- --
Lq - - - - - - - - - - I �
N f'L:I r'LI F'L1
0
�r
SECTION
11/2" =1',0"
�rD1 C', ACKET I Q 4vD"1
EVERY 4.2
551
1/4" CLEAR - -. -
�� LEXAN ANGLED
DIVIDERS WITH
f'OI-ISHEDAND
EA5ED EDGES —
r.
�.._ _
co WDI\
....-._.,..:.......:............................:.::;.
SHELF ON
Cn
�r3 iru„�
„
2:-2 2
7-
2 SECTION
11/211 = 11,011
3..
3'-211
511
b��
5TYLMARK
-rKACK HEADEF;
#110008,FINISH
#020
1/4" FR
5IJf3sTKATE
SLIDING DOOR
5rfLMARK
TRACK HEADER
#110006,1`11\115H
#020
T PLAN DETAIL
11/2" = V-0"
THIS DRAWING AS AN INSTRUMENT
OF SERVICE, IS AND SHALL REMAIN
THE PROPERTY OF ARCHITECT.
USE OF THE DRAWING, OR ANY
REPRODUCTION THERE OF, WITHOUT
THE EXPRESS WRITTEN PERMISSION
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION IN DEROGATION OF THIS
ARCHITECTS RIGHTS.
:? COPYRIGHT 2008
NO. DATE REVISION
C
Lf
, .,
SECTION
11/2" = V-19"
ki PLAN SECTION
11/2" = V-0"
�n
4 DETAIL
3"=l, -O,,
I
PLAN SECTION
11/2" =1'-O"
Hudson News - Hudson Booksellers
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
TERMINAL A -INTERNATIONAL DEPARTURES- UPPER LEVEL
ORLANDO SANFORD
INTERNATIONAL AIRPORT
SANFORD, FLORIDA
GLI
TAPERED SHROUD OVER 2"
DIA. 5F'RING LOADED GASTER
- FINISH GKAY,MODEL IXA
f3Y Cf3M INDUSTRIES
MOIJNrED ON ANGLED WOOD
F31-OGK -r0 ALLOW EASE ON
ROLLING IN ARC- FINISH
GKAY,MODEL 176A 13Y CDM
INDUS TRIES
2 60''rWIN DALL CATCH
AS MANE DY HAFELE
MODEL #244-.20,120
1/2"
5 DETAIL
3„ =1,�0»
- --
/ALUM."ANGLE
ALIGN WITH SS
TOr
SEC`s ION
11/2" =1,-L
I
SECTION
11/2" =1,.0„
DRAWN DATE
12-1-06
CHECKED JOB NUMBER
D&14
4 POS CASHWRAP
e-
12 ELEVATION
11/2" 1'-0°
0 530 rnrn BALL
BEAKING 5WIVE1_
KING BY RICHELIEU _.
#"3010 (200 kg
LOAD KA -TING)
BELOW
bIE55E CUT PAf:I'S
(5) 5TACKED TO FOKM
DA5E (5EE 5EC ION
TI -115 5F1EET)
TEFLOrI'5UPER6)IDE5'
51-IEPAKD #9465
38rnrn BASE "rl-IKEADED
INTO METAL IN5EKT, -r`(P.
0 DETAIL
3I1 .'. 1
1-011
1 ELEVATION
11/2" 01'-0°
11-Cjll
7 TOP PLAN
11/2° 1'-0"
l........ ...
OrYI l'I: met _Irl r in
a Hinds r com
P
0
i1�iIa7L'
WD1 --
16GA.Z
PLATE W
5ATIN Al
POWDER
F11\I15H 'r
MATC 1-1(
10 SECTION
11/2" ;110"
0330 rnrn DAL
DEARING 5WIVEL.
KING DY RICHELIEU
#3010 (200 k(j
LOAD RAT] NG)
DE LOW
16 GA. ZINC
PLATE vv/
5ArIN ALUM.
POWD F KCOAT
FIN15H TO
IvIATC H MT2
WD1
51'1
THIS DRAWING AS AN INSTRUMENT
OF SERVICE, IS AND SHALL REMAIN
THE PROPERTY OF ARCHITECT.
USE OF THE DRAWING, OR ANY
REPRODUCTION THERE OF, WITHOUT
THE EXPRESS WRITTEN PERMISSION
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION IN DEROGATION OF THIS
ARCHITECTS RIGHTS.
COPYRIGHT 2
G 008
ll_�u
3 3/4" 11"� 1111/2"" 11"1 515/41,
6 PLAN SECTION
11/2° = V-0"
NO. DATE REVISION
___
11/2" ^ 1'-0"
0330 rnrn BALL
—
— — — —
------_.
- --- ----
11/2" 1'. -'Il 1/2"
J
DEARING 5WIVEL
�
-- -- -- -
KING D`( KICHELIEU
#3010 (200 kg
�—
t✓rr1 ABOVE
LOAD RA"rIN(:-;)
NOTE:
GRAIN TO KUH
AL1 —
f3ELU4V
I
`�
x\ ,
��
I
13IE55E CUT PAK'r5
w-rE:
(5) 5TACKED TO FOKM
DA5E 5115-rIUN
ALL FLYWOOD AND
I
1
LAMINATE'r0 DE
(5EE
1
I
TI -115 5HEET)
I WD1
I
I
O O
6�
\
\�-7—
/ACCE55
I
I
t:EG1'D TO SECURE
>(\/
..........� ......:..........
f
KING
Nil.
1
Q
J,
fN
6 PLAN SECTION
11/2° = V-0"
NO. DATE REVISION
___
11/2" ^ 1'-0"
0330 rnrn BALL
—
— — — —
------_.
- --- ----
11/2" 1'. -'Il 1/2"
J
DEARING 5WIVEL
�
-- -- -- -
KING D`( KICHELIEU
#3010 (200 kg
�—
t✓rr1 ABOVE
LOAD RA"rIN(:-;)
NOTE:
GRAIN TO KUH
AL1 —
f3ELU4V
I
`�
x\ ,
��
I
13IE55E CUT PAK'r5
w-rE:
(5) 5TACKED TO FOKM
DA5E 5115-rIUN
ALL FLYWOOD AND
I
1
LAMINATE'r0 DE
(5EE
1
I
TI -115 5HEET)
O O
I
I
O O
\
\�-7—
/ACCE55
HOLE A5
I
t:EG1'D TO SECURE
>(\/
KING
1
Q
J,
2
F-2,5
—r = m I I - U5E
PREFORMED RADIU5
-- _ COKHERS (J 51-lAf'E)
�-
CV
�— - f L"1 W/ KADIU5ED
CORNER5
.2
ELEVATION
WD1
NI'I'"I U5,E PREFORMED
C5L"I PL. f3DIUS COF;NEI?5 (J
I
5FIAPE)
-ems-
-- - KICK DELOW
FLAT TOF ADOVE
VOID - w[)
- - I
r
I [}
11 1/2" j 2'
I
11/2"
1"
2'-11/2"
1 PLAN
v =1'-0"
Hudson News -Hudson Booksellers
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
TERMINAL A -INTERNATIONAL DEPARTURES- UPPER LEVEL
ORLANDO SANFORD
INTERNATIONAL AIRPORT
SANFORD, FLORIDA
5L'
DETA
HALF SCALE
I L " BULLNOSE EDGE
LOW
[7Ll Jl.l�l I`IU
A5 REOT)
SECTION
PINWHEEL GONDOLA
NTS
;gHto i9
DRAWN DATE
12-1-0&
CHECKED JOB NUMBER
Od"14
PINWHEEL GONDOLA
KEY / MAGNET UNIT
F-2.5
R E'%V" 113" 10 N
1 1/2" -rKIM FLAT
11/4"
- --- ----
11/2" 1'. -'Il 1/2"
J
PROFILE:, f0N PIEGES
ONLY.
W1)1 'I 1/2" HAPTWOOD
E5 LLN05E, 511)E PIECE5
0 N LY.
-- -- -- -
NOTE:
GRAIN TO KUH
AL1 —
VEKTICAL
w-rE:
ALL FLYWOOD AND
LAMINATE'r0 DE
FIRE K/ATED
—r = m I I - U5E
PREFORMED RADIU5
-- _ COKHERS (J 51-lAf'E)
�-
CV
�— - f L"1 W/ KADIU5ED
CORNER5
.2
ELEVATION
WD1
NI'I'"I U5,E PREFORMED
C5L"I PL. f3DIUS COF;NEI?5 (J
I
5FIAPE)
-ems-
-- - KICK DELOW
FLAT TOF ADOVE
VOID - w[)
- - I
r
I [}
11 1/2" j 2'
I
11/2"
1"
2'-11/2"
1 PLAN
v =1'-0"
Hudson News -Hudson Booksellers
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
TERMINAL A -INTERNATIONAL DEPARTURES- UPPER LEVEL
ORLANDO SANFORD
INTERNATIONAL AIRPORT
SANFORD, FLORIDA
5L'
DETA
HALF SCALE
I L " BULLNOSE EDGE
LOW
[7Ll Jl.l�l I`IU
A5 REOT)
SECTION
PINWHEEL GONDOLA
NTS
;gHto i9
DRAWN DATE
12-1-0&
CHECKED JOB NUMBER
Od"14
PINWHEEL GONDOLA
KEY / MAGNET UNIT
F-2.5
R E'%V" 113" 10 N
LINE OF LAKGE
IADLE DELOW
PLAN
11/2" ='I' -O''
91/21
PLAN= LARGE TABLE (1 REQ'D)
11/2" = .11.0
PLAN
'1 1/211
21_.1.1
loor
e�
I
DOVETAIL JOIN -r5
r ---r---------------------------------- -----------
I I I I
I------------------------------------------------J
f — J Lr— {
I I I I
I I I I
1U I I I I
- I I
I I I I
I I I I
I I I I
yvIA
I -
I
I I I I
I I I I
I I I I
I I I I
I I I I
2" VVIDE HARDWOOD — +
1-------------------------------------------i----1 I
-------------------------------------------
8 11 -
7 PLAN - SMALL TABLE (2 REQ'D)
11/2" = 1'-0"
THIS DRAWING AS AN INSTRUMENT
OF SERVICE, IS AND SHALL REMAIN
THE PROPERTY OF ARCHITECT.
USE OF THE DRAWING, OR ANY
REPRODUCTION THERE OF, WITHOUT
THE EXPRESS WRITTEN PERMISSION
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION IN DEROGATION OF THIS
ARCHITECTS RIGHTS.
COPYRIGHT 2008
NO. DATE REVISION
TYK
4ELEVATION
11/2" ='I' -O"
ELEVATION
11/2" =1'-011
02'-01
1Q SECTION
11/2" = .1'_011
5 ELEVATION
'11/2" - "11_011
/)I� J1_211 2'
CV
or 1/4"A" GROMMET, T`(F.. o
—
LINE OF
211
SHELF A13OVE
Q
WGl
0 0
1
irk
(W[)])
o HARDWOOD EDGE o
.1011
PLAN= LARGE TABLE (1 REQ'D)
11/2" = .11.0
PLAN
'1 1/211
21_.1.1
loor
e�
I
DOVETAIL JOIN -r5
r ---r---------------------------------- -----------
I I I I
I------------------------------------------------J
f — J Lr— {
I I I I
I I I I
1U I I I I
- I I
I I I I
I I I I
I I I I
yvIA
I -
I
I I I I
I I I I
I I I I
I I I I
I I I I
2" VVIDE HARDWOOD — +
1-------------------------------------------i----1 I
-------------------------------------------
8 11 -
7 PLAN - SMALL TABLE (2 REQ'D)
11/2" = 1'-0"
THIS DRAWING AS AN INSTRUMENT
OF SERVICE, IS AND SHALL REMAIN
THE PROPERTY OF ARCHITECT.
USE OF THE DRAWING, OR ANY
REPRODUCTION THERE OF, WITHOUT
THE EXPRESS WRITTEN PERMISSION
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION IN DEROGATION OF THIS
ARCHITECTS RIGHTS.
COPYRIGHT 2008
NO. DATE REVISION
TYK
4ELEVATION
11/2" ='I' -O"
ELEVATION
11/2" =1'-011
02'-01
1Q SECTION
11/2" = .1'_011
5 ELEVATION
'11/2" - "11_011
ELEVATION
11/2" =1'-0"
2'-0"
OL
1' -F"
- - - - - - - - - - - - - - - 21-011
o_
-------------
SECTION -----------
SECTION
1 1/21' = .11.011
�II
Hudson News Hudson Booksellers
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
TERMINAL A -INTERNATIONAL DEPARTURES- UPPER LEVEL
ORLANDO SANFORD
INTERNATIONAL AIRPORT
SANFORD, FLORIDA
NOTE: INSTALL TABLE ON CASTER -
VERIFY WITH TENANT REP.
s SECTION
11/2' =1 1-01'
1'-9" LARGE TADLE
3/4" PLYWOOD, TYE
170TH 51DE5
12 SECTION
SMALL TABLE
(tiVDI)
MOR-r15E / -rENON JOINT5
�1
MORTISE AND TENON DETAIL
SII
AXONOMETRIC
W[)1) NAKDWDOD
DRAWN DATE
12-1-08
CHECKED JOB NUMBER
0814
1 NESTED TABLES
F-2.6-
EVIb&IO
I
� 4VU1
11 011
211
ELEVATION
11/2" =1'-0"
2'-0"
OL
1' -F"
- - - - - - - - - - - - - - - 21-011
o_
-------------
SECTION -----------
SECTION
1 1/21' = .11.011
�II
Hudson News Hudson Booksellers
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
TERMINAL A -INTERNATIONAL DEPARTURES- UPPER LEVEL
ORLANDO SANFORD
INTERNATIONAL AIRPORT
SANFORD, FLORIDA
NOTE: INSTALL TABLE ON CASTER -
VERIFY WITH TENANT REP.
s SECTION
11/2' =1 1-01'
1'-9" LARGE TADLE
3/4" PLYWOOD, TYE
170TH 51DE5
12 SECTION
SMALL TABLE
(tiVDI)
MOR-r15E / -rENON JOINT5
�1
MORTISE AND TENON DETAIL
SII
AXONOMETRIC
W[)1) NAKDWDOD
DRAWN DATE
12-1-08
CHECKED JOB NUMBER
0814
1 NESTED TABLES
F-2.6-
EVIb&IO
F-3.0
2
F-3.0
ACFI
JII ACP1 /
1
FIRE -RATED I 5URFACE MOUNTED UUf'LEX
DLOCKING (-r'rf') PECEf TACLE ON EXISTING
_
� �� WALL. -SEE EI-kVA'r10N5 FOR
r---,
�, — <r , •—.—.—._ I I LOCATION
J -F3 I
I
' ,,\\ �,;\ CV ----•— -- — � � I _ � ._.moi i 6TI I
P1_2 FANEL FOR � i I
LOCAL IN"I-Ff'. -5T M U RAL L - - - J t --- '
— 6/4" 2 1/2" 3/4" _ I (GRAf'HIC5 PROVIUEI) ra
ANO IN51'ALLED D
CN Lq - I AN COM 51GN5) All
tiVD1 I
PL2 PANEL FOR n
6/4" 4" LOCAL INTERE5.1- MURAL
I _ (GRAPHIC5 FRUVIUEU I I
ASID I,NSfALLED DY DARREL BOLT - PROVIDE
ANICUM SIGNS) �� HOLE IN VALANCE TO ACCEPT "'; L; LJ LJ
JDOLT
FROFI .E OF LIGf-rr
FIXrIJKE'03' - 5EE
1'-71/4" A" 1/2" i CEILING PLAN (fYF)
I I I I
I I I I I I
_ WU1
NOTE:
to RoUT GURU & PLUG FOR LIGHT
FIX -i U RE5 'O1', 'O2', 'O5', AND 'Ord'
'r0 RECEPTACLE -CONCEAL
�Y c" i W1j.l IN MILLWORK
Q E x
17ARREL DOLTS, TOF &
'vi� — DO rTOM1
WPI r
I
., 7'-01/2" .�-,
,III \ —--------------------- n I I
I I I I
LIGHT FIXTURE IOU
LIGHT I Imo..,
FIXTURE CA AGORY 5IGNAGE - FURNI5HED T
I I I I I I
DY ANICOM 51GN5• tc) 4VD1
- J
LU
I I
DAKREL DOLT- i'KOVIDE
HOLE IN VAI_ANCF I U WVI CONT; 5/4" x 5/4" x 1/8" CU (D
4 'I/2" I 'I/'L" 3 �T" ACCEPT DOLr AL.IUMINUM APIGLF
4 ADJUSIAS�� GL2 SHELVES ON "12"LUNG
T
I I DF:ACKF'15 I12602-1 B`( "CAPfrOL°, POLISHED I I I I
I I
CHROME FINISH. G.C.'ro PROVIDE CLIP
#2077-1 AND/OR 112077-2, (2) FER BRACKET I
I I I I
ANE) 51-ICTION CLJF #115 A5 NEEUEU.
U
&7L 2D FKOFILE OF LIGHT
FIXTURE'O✓u-" MOUNTED
VERTICALLY IN FIN
DETAIL D ET�i L GAFI"1OL' [� LINE GU CCAE_FD WALL '6, 9 510N T
- 5EE I_IGHTI�IG I I VF-F,l-ICAL FANEL STANDAf,U /12 2.a �, 9G-3
SCHEDULE'
rIIGH, GlJ-r TO MATCH DIMEN51OH5 ON DWG.,
311 11�011 311 = 11�011 DKIGH`f'ZINC OK DLAGK ENAMEL FIN15H.
I I I I I
I I i i I I
FCP1 FA[3RIC
�I OVER KOKLIT E FAHE1_5
I I I I I I
I I I I I I
21/2" 4'-U" C� 140 21/2"
r' WD1
2'-0" V 141
I I
u G� .I " .I II 11-011 -0 1-O 611
-
I
I
BARREL DOLT- PROVIDE
lF HOLE IN DASE TO ACCEPT
- rl /2 u ; II'll BOLT \
I / I
1
_ 1 1/2:' C I \ I I
I
N l
F-3,0
I WD1 FC.'P1 �f;Ll 5TYLMARK" TRIM MAKER \
I - FABRIC HALF -ROUND #110200 & \
OI OVER KOrLITE PANED DA5E #41-10'43 WITH 5A-1 IN
r � ALUMINUM FIN51-1 11020. � r, *II r,
I 0 PROVIDE MITERED AND PRE-
RADIU5E [) COKNER5 A5.
BARREL DOLT - FRoVIDE — NECE55AR'( J
HOLE IN DA5E -rO AGGEFT
—��, -- DOLT
WDI
LQ
— --
<r FIRE -RATED PLh
LQ BLOCKING (T(P) 1 1/2"
5 Nrrl �
"5TrLMAKK` TRIM MAKER
F 3.0 HALF -ROUND #110200 &
DA5E #410443 WITH SATIN
ALUMINUM FIN15H #020.
FROVIDE MITERED AND FRE -
PLANRADIUSFD GORi1ER5 A5 2 NECE55AR'( SECTION ELEVATION.
11/2" =1'-0" 11/2 11-0"
11/2" = 1'-0"
THIS DRAWING AS AN INSTRUMENT
OF SERVICE, IS AND SHALL REMAIN
THE PROPERTY OF ARCHITECT.
USE OF THE DRAWING, OR ANY
REPRODUCTION THERE OF, WITHOUT
THE EXPRESS WRITTEN PERMISSION
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION IN DEROGATION OF THIS
ARCHITECTS RIGHTS.
.;: COPYRIGHT 2008
NO. DATE REVISION
Hudson News - Hudson Booksellers
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
TERMINAL A -INTERNATIONAL DEPARTURES- UPPER LEVEL
ORLANDO SANFORD
INTERNATIONAL AIRPORT
SANFORD, FLORIDA
PROF
GFIOV
ADC4
CON
HINC
FUT URA ON
LL OUT51PE
OKNEKS,
rY1')
3 PLAN DETAIL
11/2" ^ 1'-0"
THIS DRAWING AS AN INSTRUMENT
OF SERVICE, IS AND SHALL REMAIN
THE PROPERTY OF ARCHITECT.
USE OF THE DRAWING, OR ANY
REPRODUCTION THERE OF, WITHOUT
THE EXPRESS WRITTEN PERMISSION
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION IN DEROGATION OF THIS
ARCHITECTS RIGHTS.
COPYRIGHT 2008
,LL CATCH DY
MODEL
).'120 2 3/S"
NOTE,
ENSURE THERE
VENTALATION 7
FOR EP CLOSET
2 SECTION
11/2" = 11
"0" -
NO.
DATE
REVISION
1
2-22-09
TENANT REVISIONS
TO
)OP
1-1
-1EAP
1 ELEVATIOIN
11/2" ®1'-0"
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
TERMINAL A -INTERNATIONAL DEPARTURES- UPPER LEVEL
ORLANDO SANFORD
INTERNATIONAL AIRPORT
SANFORD, FLORIDA
DRAWN DATE
12-1-08
CHECKED JOB NUMBER
a
ELECTRIC PANEL ENCLOSURE
00 g� F®3. 1
/
/
/
/
/
/
ALIG�(5LATWALL
w
EQ
/ 2'-F�"
ECS
/
/
/
/
/
FA55AGE 5ET -
\ DKU5HEPALUM.
LEVEK HANDLE --
\
1 ELEVATIOIN
11/2" ®1'-0"
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
TERMINAL A -INTERNATIONAL DEPARTURES- UPPER LEVEL
ORLANDO SANFORD
INTERNATIONAL AIRPORT
SANFORD, FLORIDA
DRAWN DATE
12-1-08
CHECKED JOB NUMBER
a
ELECTRIC PANEL ENCLOSURE
00 g� F®3. 1
THIS DRAWING AS AN INSTRUMENT
OF SERVICE, IS AND SHALL REMAIN
THE PROPERTY OF ARCHITECT.
USE OF THE DRAWING, OR ANY
REPRODUCTION THERE OF, WITHOUT
THE EXPRESS WRITTEN PERMISSION
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION IN DEROGATION OF THIS
ARCHITECTS RIGHTS.
COPYRIGHT 2008
NO.
DATE
REVISION
I
2-22-09
TENANT REVISIONS
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
TERMINAL A -INTERNATIONAL_ DEPARTURES- UPPER LEVEL
ORLANDO SANFORD
INTERNATIONAL AIRPORT
SANFORD, FLORIDA
PLAN
11/2" _ .1,-0"
"Aft
LTJ
SECTION
11/2" =]'-O"
THIS DRAWING AS AN INSTRUMENT
OF SERVICE, IS AND SHALL REMAIN
THE PROPERTY OF ARCHITECT.
USE OF THE DRAWING, OR ANY
REPRODUCTION THERE OF, WITHOUT
THE EXPRESS WRITTEN PERMISSION
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION IN DEROGATION OF THIS
ARCHITECTS RIGHTS.
COPYRIGHT 2008
A)2
OWELED TOP AND
'0110M, 1/4" x1"
%KOMMET, 5LEEVE TYP,
D2
1)2 ADJ. SHELF
D2
552
P50-250
GA5TEK5
NO. DATE REVISION
2 SIDE ELEVATION
11/2" =1'-0"
I
WD2
5L2
WD2
552
ZI'I-0II
3 _FRONT ELEVATION
11/2" �=.I.O
NTS
Hudson News - Hudson Booksellers
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
TERMINAL A -INTERNATIONAL DEPARTURES- UPPER LEVEL
ORLANDO SANFORD
INTERNATIONAL AIRPORT
SANFORD, FLORIDA
DRAWN DATE
12 -'I -U8
CHECKED JOB NUMBER
Od14
BOOK TABLE
F-4.1
DOWELED TOP AND
BOTTOM, 1/4"x1"
GKOMMET, TYP,
�� II
�9
N
O
T
VVD2
WD2
-
L"
�o
PLAN
11/2" _ .1,-0"
"Aft
LTJ
SECTION
11/2" =]'-O"
THIS DRAWING AS AN INSTRUMENT
OF SERVICE, IS AND SHALL REMAIN
THE PROPERTY OF ARCHITECT.
USE OF THE DRAWING, OR ANY
REPRODUCTION THERE OF, WITHOUT
THE EXPRESS WRITTEN PERMISSION
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION IN DEROGATION OF THIS
ARCHITECTS RIGHTS.
COPYRIGHT 2008
A)2
OWELED TOP AND
'0110M, 1/4" x1"
%KOMMET, 5LEEVE TYP,
D2
1)2 ADJ. SHELF
D2
552
P50-250
GA5TEK5
NO. DATE REVISION
2 SIDE ELEVATION
11/2" =1'-0"
I
WD2
5L2
WD2
552
ZI'I-0II
3 _FRONT ELEVATION
11/2" �=.I.O
NTS
Hudson News - Hudson Booksellers
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
TERMINAL A -INTERNATIONAL DEPARTURES- UPPER LEVEL
ORLANDO SANFORD
INTERNATIONAL AIRPORT
SANFORD, FLORIDA
DRAWN DATE
12 -'I -U8
CHECKED JOB NUMBER
Od14
BOOK TABLE
F-4.1
ACNi �AGt'1-
FIRE,-f'.ArEU
FIKE-KAI LP
DLOCKING (1YN) P1_2 COVEKED PANEL [3`( DLOCKING (T(") f'L2 COVERED f'ANIEL DYMILI_WOKK CONTRACTOR
AND 0KAFHIC [3Y ANICOM — MILLWOKK CON'TRACfOK
51GH5 AND GRAPHIC DY ANICOM
5IGH5
-) �C)
2'-51/4°
�I-
.10/0/r7
F -q -.O F-4.0
If IAKDWOOU PAINTED _ HARDWOOD FAINTED
G. �. ♦. Jrl
-- GLO55 ( [SLACK f GLUSh'( [.,LACK �
�Lq I<<)
ELECTRICAL KECErIACLE I — ELECIKICAL KECEPTAC'LE
r
WD2 WD2
4RE
13ULKHEAD TO DE MODIFIED DAr;KEL r30LT - NKOVIDE DARKEL DOLT - NROVIUE
AT AKEA OF PAI-"YKIJ5 HOLE IN VALANCE TO xACCENT
PINNEK LOCATION � � HOLE IN VALANCE TO ACCENT
4 1/2 DOLT NL2 � J.
5 '1/2" DOLT
i I
° I
i I I
I I
CUSTOM SPINNERS TO BE
SUPPLIED BY PAPYRUS THROUGH
HUDSON GROUP
I I
l ( l I I
I I I I
I I
I I
r
`a I4VU2�
I I
I I
'fI � 1= � I
<r I I
1 I I
I I
I I
1
( Z r
�
NOTE:
NOTE: ° ; KOU'f CURD &PLUG FOR LIGHTROUT COKP & PLUG FOR LIGHT
_ I FIxTUKES'nI','02','0 ?)', AND'OU'
°L FIX'rURE5'0i','02','O6% AND'00'
- iTO RECEI'TACLE -CONCEAL ° ° TO KECEI'TACLE -CONCEAL
I IN MIL!_WOKK IN MILLWORK
I I I I
NKOFILE OF LIGH-r ; NKOFILE OF LIGHT
( _ I
FIXTURVOU IVIOUNTEP
FIXTURE06 MOUNTED VERTICALLY IN FIN
VEKTICAI_l_Y IN FIN
5EE'L!G[i TING; ° ° 5EE LIGH TING
5CHEPULE' 5CHEPULE'
I I I I
I I
j 1 1 _ I AL2 5CKEWED TO
FIRE -RATED PLYWOOD
WITH CONCEALED FLAT-
' I I
HEAP 5CREW5
I I I I
WD2 �r
I I
I I
I I
I _TIT °
I I
I I I
I I
I I I I
DARKEL DOLT - PROVIDE
- DARREL 130L:r - NROVIPE
I " r I1i HOLE IN DASE 1-0 ACCEPT HOLE IN DASE "f0 ACCENT
1 BOLT ) DOLT
l I I I I/GTI
_._..I 1. _.I
- I I I
` I
�7
1/2" 13 '1 /"t I'
I� �52 5GLIU 5UF' FACE DA5E ��52 Dv
SOLID SURFACE DASE
I
\I I �
FIRE -RATED FIRE -RATED �—� �.
DLOcKING (T -(f') BLOCKING (TYP)
F-4.0
F 4.0
SECTION SECTION
THIS DRAWING AS AN INSTRUMENT
OF SERVICE, IS AND SHALL REMAIN
THE PROPERTY OF ARCHITECT.
USE OF THE DRAWING, OR ANY
REPRODUCTION THERE OF, WITHOUT
THE EXPRESS WRITTEN PERMISSION
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION IN DEROGATION OF THIS
ARCHITECTS RIGHTS.
COPYRIGHT 2008
NO.
DATE
REVISION
2-22-09
TENANT REVISIONS
, ----.---
Hudson - 1__o_
Booksellers
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
TERMINAL A -INTERNATIONAL DEPARTURES- UPPER LEVEL
ORLANDO SANFORD
INTERNATIONAL AIRPORT
SANFORD, FLORIDA
DRAWN DATE
12-1-05
CHECKED JOB NUMBER
0814
PAPYRUS WALL UNITS
M ETALU NA
Architecture & Desitin P.C.
1665 hlighway 588
Ellisville, MS 39,137
TEL 601.9 14.6909
FAX 601.763.4886
www.MET/-\LUN,
email: metalunaC
THIS DRAWING AS AN INSTRUMENT
OF SERVICE, IS AND SHALL REMAIN
THE PROPERTY OF ARCHITECT.
USE OF THE DRAWING, OR ANY
REPRODUCTION THERE OF, WITHOUT
THE EXPRESS WRITTEN PERMISSION
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION IN DEROGATION OF THIS
ARCHITECTS RIGHTS.
COPYRIGHT 2008
m
NO.
DATE
REVISION
1
2-22-09
TENANT REVISIONS
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
TERMINAL A -INTERNATIONAL DEPARTURES -UPPER LEVEL
ORLANDO SANFORD
INTERNATIONAL AIRPORT
SANFORD, FLORIDA
DRAWN DATE
12-1-08
CHECKED JOB NUMBER
0814
PAPYRUS DISPLAY TABLE
,VOW F-4.3
LIGHT FIX'j"IrURE SCHEDULE
NO,
SYMBOL
DESCRIPTION
MANF / MODEL #
LAMP
FF r
I» 5 Highway X88
? :• : :• :•
Euisviu _ rir) 39437 7
r
u
2 X 2 KECE55ED PARADOLIC LOUVER, FLUORESCENT LIGHT
'COOPER-METALUX'
(3) 1 -AV T& LAMPS
131
v ....
....:::: .... . ..:::.::.:.
FIXTURE, 9 CELL, (3)17W TS LAMPS, 120V
2EF5GAX-317-12OV-E13,5
-
email; rne�taluna( mindsprin�.corn
G
�. r.
2 X 2 KECE55EP PARADOLIC LOUVER, FLUORESCENT LIGHT
'COOPER-METALUX
_
(3) 17W r5 LAMPS
�1Fnn
> 1
FIX-rUE".E, 9 DELL, (5)'17W T& LAMPS, EMERGENCY DATTERY PAC,
2EF5GAX-517-120V-ED(3-EM
-ur
INDICA"rOR LIGHT, 120V
U5E'DODINE' D50 FLUOR.
131
B
EMERGENCY 13ALLA5T
F1
O
6" LINE VOLTAGE RETROFIT COMPACT- FLUORESCENT
'CONTECH'
(2) CF26DTT
nl Til
�.EGE`>J��ED FIXED DOWNLIGN-f W/ WHITE DAPPLE
RL226-R /26-26
wCTP,1826-02
01
LINEAE: FLUORESCENT, (1)14W Tb ARCH.
DARTCO' DFL255-14PCW
(1) F14T3
FIXTURE W/ INTEGRAL 5ALLA5T AND
POWER CORD & PLUG, 120V, (15 5/51)
0�
LINEAR FLUORESCENT, (1) 25W -F3 ARCH.
FIXTURE W/ INTEGRAL DALLAST AND
DARrCO' DFL255-17PCW
(1) F1%T8
POWER CORD 6. PLUG,120V (24 5/51)
I II 111--
I III � I
I ILI
03
LINEAR FLUORESCENT, (1) 25W T5 ARCH.
'DARTCO' DFL255-25PCW
'U5E
(1) F25T8
t^-
4�I^-�� / I
--t`F `
FIXTURE W/ IN-rEGRAL 5ALLA5T AND
5r/\GGEKED FIXTUKE & EXTRA
POWER CORD & PLUG, 120V (36 501)
LONG LIFE Lr\MPS Af30VE GALLEKIE
SHELF
1 I/
LINEAR FLUORESCENT, (1) 35W T& ARCH.
B1
06
B1
FIXTURE W/ INTEGRAL DALLA5T AND
DARTCO' DFL255-2525PGW
(2) F25T8
BI
POWER CORD & PLUG, '120V (751/4"L)
X1
ARCHITECTURAL EDGE -LIT
EXIT 51GN
NOTE; ALL LIGHT FIXTURES SPECIFIED ARE TO BE PURCHASED BY THE G.C. THROUGH THE TENANT'S LIGHTING
CONSULTANT - CHARLIE AND COMPANY, CONTACT VIRGIL @ (309) 665-5643 NOTE. LIGHTS MUST BE PREPAID BEFORE
DELIVERY
METALUNA
DATE
REVISION
1
i�
Arcf litecture & L)eslb n PC,,
_ OWNER REVISION
FF r
I» 5 Highway X88
? :• : :• :•
Euisviu _ rir) 39437 7
r
u
06,
TEL 60 1.9 1,1,6909 ����N
:.....::.:>:::.>:
FAX 601.763.4886
av<
v ....
....:::: .... . ..:::.::.:.
r.
www, ME rAL NA r r' ��
U a C IItC _tom. _OfYI
-
email; rne�taluna( mindsprin�.corn
G
�. r.
THIS DRAWING AS AN INSTRUMENT
OF
� SERVICE IS ANDS HALL REMAIN
HE PROPERTY OF ARCHITECT.
USE OF THE DRAWING OR ANY
REPRODUCTION THEREOF, WITHOUT
ouT
THE EXPRESS WRITTEN PERMISSION
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION T
o O MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BEN TR ED
CO S U AS
PUBLICATION IN DEROGATION OF THIS
ARCHITECTS RIGHTS.
COPYRIGHT 2008
ELECTRICAL_ SYMBOLS AND LEGEND
CONDUIT AND WIRE (IN CONCEALED LOCATIONS WHEN POSSIBLE) - HASH MARKS
SHOWN FOR SWITCHING CLARITY ONLY. SIZE CONDUCTORS PER 2005 NEC.
"HOME RUN" TO PANEL BOARD - SUBSCRIPT DENOTES PANEL AND CIRCUIT
DESIGNATION
NOTE TO CONTRACTOR;
PRIOR TO BIDDING THE CONTRACTOR SHALL VISIT THE JOBSITE
TO VERIFY FIELD CONDITIONS FOR HIS PARTICULAR TRADE.
IF THERE ARE DISCREPANCIES IN THE CONTRACT DRAWINGS
AND ACTUAL FIELD CONDITIONS THEN THE CONTRACTOR SHALL
PREPARE A BIDD BASED ON ACTUAL FIELD CONDITIONS AND
IMMEDIATLY INFORM THE ARCHITECT IN WRITING OF THE
THE DISCREPANCIES. IF JOBSITE IS NOT VISITED PRIOR TO
BIDDING THEN THE CONTRACTOR WILL BE HELD RESPONSIBLE
FOR ABOVE MENTIONED DISCREPANCIES.
I_ANULOKV5 EXIU-nNG
__-_
-ml --n- A
DATE
REVISION
1
2-22-09
_ OWNER REVISION
OU5F'ENDEU CEILING
r
u
-
I lul pu
� II -III
I II ILII I
-ur
B 1 Em
131
B
nl Til
li iiii
I
I II 111--
I III � I
I ILI
t^-
4�I^-�� / I
--t`F `
1 I/
L�_iiii I
r__n--ILII
B1
B1
/� i
B1
BI
B1
I II IIID
/ ;
11 II
III
l u ull ii
Lil ii
Lijd
�ffi
,1 i
� i i l
L-1,3
I II III III
/ �
_J
ii iiii lu
i /
1.3 II
I II ILII ii
Ly__1y�1
131
131
/ �
% %
B1 EM
131
B1 EM L- II
(VIA T )Ii
�I
/
I L i
%
1 /
LAMM
ll -
I j
1312mJ
i
B1
131
B1
B1 I F"lrt
I u Ili I
I I
LLL
H±
L±I
111 11' III
I'
B1
B1
B1
I 1
B1 I F I R
LJlii iii; I,°°
I
it------
_-;
B'1
B1
B1
B1EM FIR
---- r
--- Ir'
�I--
— mil
f I
�-�-•� I I
I Ell
I
B1
B1EM
131
131
B1
B1
I FIR
!IT
I
�
I II
I
--Til
131
B1
B1
B1
B1
B1
I
I
i FIR
�
LLL
LEI
HE
LLL1_
I
I
I
I
BI
B1EM
131
BI
-
B1
BIEM
I FIR
I
,
,
I
III
I
-II
- III
II
i III
i
B1
B1
_
B1
B1
_
B1
B1
I
' F1R
I
_
L i
71
I li I
I
;I
LLLJ
H
ffid
±H-
I
----
---------II
--II
1iITIIIlIrlI-
r 1III
--------I -----,IIIrjLII
-
--•- I
-�rII
�i�IIII�
,II(III-TTIII
-"�I '----
FIR
I1
F
I
]iI- ---_--
---------- ItI
{'LILt
-I ----- ---
+
- -------J
1I
I
Ili I III I III I I I II I I it ii l I
------ L'----' ------ L----- ------- -� -7 I`' --------^-----Ji
ill I I
-o-
LIGHTING PLAN
1/4" =1'.�0"
NO.
DATE
REVISION
1
2-22-09
_ OWNER REVISION
ADJACENT RESTAURANT
-! -
R
1R
FIR
FIR
FIR
F1R
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
�,
I EXI5T LNG 5OFFIT TO KEMAIN
EXI5TING 51J5 ENL
CEILING, LIGHTING &
mFFU5EF,5 -ro REMAIN
I
I
i
I
� I I
I
� 1 I
I I
LINA. OF EX15-rING
51GN SHELF I
\ A13OVE TO REMAIN
I
I
I
I
I
I
I
1
-----------------------------------------
EXI5TING GYF.
be-- [3D.5OFFrr-ro
•ro�IKEMAIN
TERMINAL A -INTERNATIONAL DEPARTURES- UPPER LEVEL
ORLANDO SAN FORD
INTERNATIONAL AL AIRP®
RT
SANFORD FLORIDA
------------------------------- ---------
NEW 5 rOKEFRONT
51c�jN
I
I
I
I
DON PENN, P.E.
FLORIDA ENGINEER N0. 0051096 ME ,H
S
dp635 WESTPOR
T PARKWAY SUITE 300
GRAPEVINE, TEXAS 76051
817-410-2858 FAX 817-251-8411
DRAWN DATE
JVP
CHECKED JOB NUMBER
DP
L.
U
all
ELECTRICAL_ SYMBOLS AND LEGEND
C)
JUNCTION BOX - SHALL BE ACCESSIBLE AFTER COMPLETION OF CONSTRUCTION
T
PHONE OUTLET
MOD 01>
DATA OUTLET
CR 00>
CASH REGISTER OUTLET
S
SINGLE POLE WALL SWITCH - MOUNT 48" ABOVE FLOOR UNLESS
REVISION
INDICATED OTHERWISE
2-22-09
DISCONNECT SWITCH (NEMA -3R IN WET LOCATIONS)
FURNISHED
DUPLEX RECEPTACLE MOUNTED 18" ABOVE FLOOR UNLESS NOTED OTHERWISE
NO.
QUAD RECEPTACLE MOUNTED 18" ABOVE FLOOR UNLESS NOTED OTHERWISE
IG/SS �
ISOLATED GROUND/SURGE SUPRESSION RECEPTACLE MOUNTED 18- ABOVE
FLOOR, UNLESS NOTED OTHERWISE, HUBBELL # G5362 (BLUE)
IG/SS =
ISOLATED GROUND/SURGE SUPRESSION RECEPTACLE MOUNTED 18" ABOVE
CA511 KEGI5'rEK
FLOOR, UNLESS NOTED OTHERWISE, (2) HUBBELL # G5362 (BLUE)
�C TELEVISION CONNECTION DEVICE
CONDUIT AND WIRE (IN CONCEALED LOCATIONS WHEN POSSIBLE) HASH MARKS
SHOWN FOR SWITCHING CLARITY ONLY. SIZE CONDUCTORS PER 2002 NEC.
"HOME RUN" -f0 PANELBUARD -SUBSCRIPT DENOTES PANEL AND CIRCUIT
DESIGNATION
T-,
"HOME RUN" TO TELEPHONE BACKBOARD - 1 " C WITH PULL CORD TO TEL -BD.
TERMINATE ABOVE TEL -BD. FOR USE BY OTHERS.
IG/SS ISOLATED GROUND/SURGE SUPRESSION
CR CASH REGISTER
IG ISOLATED GROUND
AFF ABOVE FINISHED FLOOR
DATA & COMMUNICATION SPECIFICATIONS:
COMMUNICATION:
1. PROVIDE (4) FOUR CAT 6 CABLES, WHICH INCLUDES (1) ONE GRAY CABLE FOR
VOICE FROM BLDG. TELEPHONE BACKBOARD TO CASHWRAP.
2. TERMINATE (3) THREE SEPERATE PHONE LINES INTO (3) THREE SEPERATE RJ1 1
.JACK WALL PLATE ON THE LOWER SECTION OF THE CASHWRAP AT THE MAIN REG-
ISTER LOCATION.
3. TERMINATE (1) ONE ADDITIONAL PHONE LINE INTO A RA 1 WALL PLATE JACK ON
THE LOWER SECTION OF EACH ADDITIONAL CASHWRAP REGISTER LOCATION.
4. PROVIDE A LABLE ON RJ1 1 WALL PLATE INDICATING THE TELEPHONE NUMBER AT
EACH LOCATION.
5. CERTIFY CONTINUITY OF EACH PHONE LINE.
DATA:
1. RIJN (1) ONE GE PATCH LINE FROM EACH REGISTER BACK TO OWNER SUPPLIED
HIJB, LOCATED AT THE LOWER SECTION AT MAIN CASH REGISTER, TERMINATE WITH
A MALE RJ45 AT BOTH ENDS.
2. OWNER WILL PROVIDE AND INSTALL ALL CASH REGISTERS, MODEMS AND HUBS.
CONTRACTOR TO COORDINATE LOCATIONS WITH OWNER.
3. ALL DATA CABLE TO RUN UNDER THE CASHWRAP IN CONDUIT. TERMINATE CONDUIT
ON THE LOWER SHELF AT EACH CASH REGISTER LOCATION. PROVIDE ENOUGH SLACK
CABLE TO REACH TO THE TOP OF THE CASHWRAP AND PLUG INTO EACH CASH REG-
ISTER. PROVIDE (1) FOOT OF SLACI< CABLE AT THE MODEM HUB END OF EACH CABLE.
4. PROVIDE LABEL FOR EACH CABLE AT THE MODEM HUB END.
5. CERTIFY CONTINUITY OF EACH DATA CABLE.
1. PROVIDE (1) ONE 120 VOLT ISOLATED GROUND QUAD RECEPT ON A DEDICATED CIRCUIT
ON THE LOWER SECTION OF THE CASHWRAP AT THE MAIN CASH REGISTER LOCATION.
2. PROVIDE (1) ONE 120 VOLT ISOLATED GROUND DUPLEX RECEPT ON A DEDICATED
CIRCUIT ON THE LOWER SECTION OF THE CASHWRAP AT EACH ADDITIONAL CASH REG-
ISTER LOCATION(S).
3. CERTIFY CONTINUITY OF EACH OUTLET.
THIS DRAWING AS AN INSTRUMENT
OF SERVICE, IS AND SHALL REMAIN
THE PROPERTY OF ARCHITECT.
USE OF THE DRAWING, OR ANY
REPRODUCTION THERE OF, WITHOUT
THE EXPRESS WRITTEN PERMISSION
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION IN DEROGATION OF THIS
ARCHITECTS RIGHTS.
COPYRIGHT 2008
+104" (TYP)
NOTE_ TO CONTRACTOR:
PRIOR TO BIDDING THE CONTRACTOR SHALL VISIT THE JOBSITE
TO VERIFY FIELD CONDITIONS FOR HIS PARTICULAR TRADE.
IF THERE ARE DISCREPANCIES IN THE CONTRACT DRAWINGS
AND ACTUAL FIELD CONDITIONS THEN THE CONTRACTOR SHALL
PREPARE A BIDD BASED ON ACTUAL FIELD CONDITIONS AND
IMMEDIATLY INFORM THE ARCHITECT IN WRITING OF THE
THE DISCREPANCIES. IF JOBSITE IS NOT VISITED PRIOR TO
BIDDING THEN THE CONTRACTOR WILL BE HELD RESPONSIBLE
FOR ABOVE MENTIONED DISCREPANCIES.
POINT AND PROVIDE A 1 " CONDUIT FROM THAT
CONNECTION TO THE SPACE WITH PULLCORD FOR
FUTURE USE.
NO.
DATE
REVISION
1
2-22-09
_ OWNER REVISION
FURNISHED
`�(POWER PLAN
1/4 1 = 11-011 A - -
EQUIPMENT SCHEDULE
ELECTRICAL.
FURNISHED
INSTALLED
NO.
ITEM
MOUEUMANUFACTURER
SIZE
_- BY
BY
CA511 KEGI5'rEK
VEKIFY
VERIFY
VEKIFY
TEI IANT
G.C.
Of EN FACE
'50UTHEKN 5TOKE FIXTUKE INCA
501/21V x 29 5/8"D
120/240 4 WIRE WITH
TENANT
G.C.
KEFF:IGEKA"IED CASE
MDc-%oHN5c
x 78 5/(5"Fl
NEUTF:AL
NEMA:L"I�1-201', 16 -OA
42" FLAT 5CREEN
015PLA(
VERIFY
VEKIFY
VERIFY
fENAN f
G.C.
DIGITAL PKOCE550K
VEKIFY
VERIFY
VEKIFY
TENANT
G.C.
Hudson Hudson BookseRers
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE_ IN
TERMINAL A -INTERNATIONAL DEPARTURES- UPPER LEVEL
ORLANDO SANFORD
INTERNATIONAL AIRPORT
SANFORD, FLORIDA
dpDON PENN, P.E.
FLORIDA ENGINEER NO. 0051096 (MECH)
635 WESTPORT PARKWAY, SUI1E 300
GRAPEVINE, TEXAS 76051
817-110-2858 FAX 817-251-8411
If
DRAWN DATE
JVP
CHECKED JOB NUMBER
DP 0814
FIRE ALARM SPECIFICATIONS
1. FURNISH ALL REQUIRED LABOR, MATERIALS, EQUIPMENT AND CONTRACTORS SERVICES NECESSARY FOR
THE COMPLETE INSTALLATION OF FIRE ALARM ITEMS AS INDICATED ON THE DRAWINGS, INCLUDING BUT NOT
LIMITED TO THE FOLLOWING:
A. STROBES.
B. WIRING DEVICES.
C. PA SPEAKERS.
2. DRAWINGS ARE DIAGRAMMATIC AND INDICATE THE GENERAL ARRANGEMENT OF SYSTEMS AND WORK.
CONTRACTOR SHALL FURNISH ALL NECESSARY OUTLETS, SUPPORTS, FITTINGS AND ACCESSORIES TO FULFILL
APPLICABLE CODES, REGULATIONS BUILDING STANDARDS AND THE BEST PRACTICE OF THE TRADE FOR THE
INSTALLATION OF FIRE ALARM WORK.
3. THE FIRE ALARM WORK SHALL COMPLY WITH THE LATEST F.B.C. FOR THE STATE OF FLORIDA AND LATEST
AMENDMENTS, MDAD DESIGN GUIDELINES MANUAL(DGM) AND LIFE SAFETY MASTER PLAN, NATIONAL
ELECTRICAL CODE OF THE NEPA-NEC, NFPA 72A, 72E, 101, 70, ARTICLE 760, '15, 16, 21., STANDARD OF THE
NATIONAL BOARD OF UNDERWRITERS, OSHA, THE BUILDING MANAGEMENT STANDARDS, MDAD AND ALL
AUTHORITIES HAVING JURISDICTION. THE CONTRACTOR SHALL SECURE ALL CERTIFICATES OF REQUIRED
ORDINANCES, AND DELIVER THEM 'TO THE OWNER'S REPRESENTATIVE.
4. THE CONTRACTOR SHALL HAVE HAD EXPERIENCE ON AT LEAST (2) PROJECTS INVOLVING QUANTITIES AND
COMPLEXITIES AT LEAST EQUAL -1-0 THOSE REQUIRED UNDER THIS PROJECT. THE CONTRACTOR SHALL VISIT
AND EXAMINE CAREFULLY THE AREAS AFFECTED BY THIS WORK TO BECOME FAMILIAR WITH EXISTING
CONDITIONS AND WITH DIFFICULTIES THAT WILL ATTEND THE EXECUTION OF THIS WORK. THE CONTRACTOR
SHALL PERFORM THIS PRIOR TO SUBMITTING HIS PROPOSAL. THIS WILL BE CONSTRUED AS EVIDENCE THAT
SUCH AN EXAMINATION HAS BEEN MADE, AND LATER CLAIMS WILL NOT BE RECOGNIZED FOR EXTRA LABOR,
EQUIPMENT, OR MATERIALS REQUIRED BECAUSE OF DIFFI (�ULTIES ENCOUNTERED WHICH COULD HAVE BEEN
FORESEEN HAD SUCH AN EXAMINATION BEEN MADE.
5. UPON REVIEW OF FIRE ALARM DRAWINGS PRIOR TO SUBMITTING HIS PROPOSAL, THE FIRE ALARM
CONTRACTOR SHALL INFORM THE ARCHITECT AND/OR ENGINEER OF ANY DISCREPANCIES OR REQUEST
CLARIFICATION, IF NECESSARY, CONCERNING THE INTENT OF THE PLANS AND SPECIFICATIONS TO PROVIDE A
COMPLETE FIRE ALARM INSTALLATION. LATER CLAIMS WILL NOT BE RECOGNIZED FOR EXTRA LABOR,
EQUIPMENT OR MATERIALS SHOULD SUCH PROCEDURE NOT BE FOLLOWED.
6. THE C'ONTRAC'TOR SHALL COORDINATE HIS WORK WITH OTHER CONTRACTORS WHOSE WORK MIGHT AFFECT
THIS IN CONTRACTORS SHALL ARRANGE ALL PARTS OF 'THIS WORK AND EQUIPMENT IN PROPER
RELATION TO THE WORK AND EQUIPMENT OF OTHERS AND WITH BUILDING CONSTRUCTION AND
ARCHITECTURAL FINISH SO THAT If WILL HARMONIZE IN SERVICE AND APPEARANCE.
7. THE DRAWINGS INDICATE SIZE AND GENERAL LOCATION OF WORK. SCALED DIMENSIONS SHALL NOT BE
USED. THE EXACT LOCATION AND ELEVATION OF DEVICES SHALL BE DETERMINED FROM THE ARCHITECTS
DRAWINGS.
8. CUTTING AND PATCHING:
A. ALL CUTTING AND PATCHING REQUIRED FOR EQUIPMENT INCLUDED IN THESE SPECIFICATIONS SHALL BE
DONE BY THIS CONTRACTOR. IF CUTTING IS DONE DUE TO FAILURE TO PERFORM PRELIMINARY ROUGHING
WORK, THIS CONTRACTOR WILL BE RESPONSIBLE FOR THE COST OF THE ADDITIONAL PATCHING.
B. IN AREAS WHERE NEW WALLS OR PARTITIONS ARE REQUIRED THE CONTRACTOR SHALL FURNISH AND
LOCATE ALL REQUIRED SLEEVES AND INSERTS BEFORE THE WALLS OR PARTITIONS ARE CONSTRUCTED. WHERE
SLEEVES AND INSERTS WERE NOT INSTALLED OR WHERE SLEEVES AND INSERTS WERE INCORRECTLY LOCATED,
THE CONTRACTOR SHALL BE RESPONSIBLE FORTHE COST OF ANY REQUIRED CUTTING AND PATCHING.
C. THIS CONTRACTOR SHALL NOT DO ANY CUTTING THAT MAY IMPAIR THE STRENGTH OF BUILDING
CONSTRUCTION. NO OUTLETS, SWITCHES OR SIMILAR DEVICES SHALL BE PERMITTED TO BE CHOPPED INTO
ANY CORE WALL. NO HOLES, EXCEPT FOR SMALL SCREWS MAY BE DRILLED IN BEAMS OR OTFIER STRUCTURAL
MEMBERS WITHOUT OBTAINING PRIOR APPROVAL. ALL WORK SHALL BE DONE IN A NEAT MANNER BY
MECHANICS SKILLED IN THEIR -TRADES AND AS APPROVED.
9. RACEWAYS AND BOXES:
A. NO OUTLETS OR SIMILAR DEVICES SHALL BE PERMITTED TO BE CHOPPED INTO ANY CORE WALL.
B. WHERE SIZES OF RACEWAYS OR BOXES ARE NOT INDICATED, THE CONTRACTOR SHALL SIZE THESE ITEMS
AS REQUIRED FOR THE INSTALLATION.
C. ALL CONDUIT AND TUBING SHALL BE CUT SQUARE AND REAMED AT THE ENDS. RED LEAD SHALL BE
APPLIED TO ALL EXPOSED THREADS AFTER JOINTS HAVE BEEN MADE UP CLEAN AND TIGHT.
D. CONDUIT AND TUBING RUNS SHALL BE MECHANICALLY AND ELECTRICALLY CONTINUOUS FROM SERVICES
STARTING TO ALL OUTLETS. CONDUIT SHALL ENTER AND BE SECURELY CONNECTED TO CABINET, JUNCTION
BOX OR OUTLET BOX BY MEANS OF LOCKNUTS ON THE OUTSIDE AND INSIDE AND AN INSULATED BUSHING ON
THE INSIDE. IN TUBING OR FLEXIBLE METAL CONDUIT, THE ONE COMPRESSION LOCKNUT SHALL BE MADE
WRENCH -TIGHT. ALL LOCKNIJTS SHALL BE 'THE BONDING TYPE WITH SHARP EDGES FOR DIGGING INTO THE
METAL ENCLOSURE AND SHALL BE INSTALLED IN SUCH A MANNER THAT WILL ASSURE A LOCKING AND
ELECTRICALLY CONTINUOUS INSTALLATION. LOCKNUTS AND BUSHINGS WILL NOT BE REQUIRED WHERE
CONDUITS ARE SCREWED INTO TAPPED CONNECTIONS.
E. ALL VERTICAL RUNS OF CONDUIT OR TUBING TERMINATING IN THE BOTTOM OF WALL BOXES OR CABINETS
OR SIMILAR LOCATIONS, SHALL BE PROTECTED FROM THE ENTRANCE OF FOREIGN MATERIAL PRIOR TO THE
INSTALLATION OF CONDUCTORS.
F. UNLESS OTHERWISE SPECIFIED, ALL CONDUIT AND TUBING SHALL BE INSTALLED CONCEALED. IN GENERAL,
ALL CONDUIT AND TUBING SHALL BE RIJN IN HUNG CEILINGS AND FURRED SPACES WHERE THEY EXIST.
WHERE CONDUIT IS RUN EXPOSED, IT SHALL BE SECURELY SUPPORTED WITH ZINC COATED MALLEABLE IRON
PIPE STRAPS OR OTHER APPROVED METALS.
G. EVERY CONDUIT SYSTEM SHALL BE INSTALLED COMPLETE BEFORE ANY CONDUCTORS ARE DRAWN IN. WIRE
PULLING LUBRICANTS, WHEN UTILIZED, SHALL BE IN ACCORDANCE WITH THE REQUIREMENTS OF
UNDERWRITER'S LABORATORIES, INC., APPLICABLE TO THE SPECIFIC CONDUCTOR OR CABLE INSULATION AND
RACEWAY MATERIAL.
I. MINIMUM CONDUIT SIZE SHALL BE 3/4". MAXIMUM SIZE FOR EMT IS 2".
10. FIRE ALARM SYSTEM:
A. WHERE CONSTRUCTION INTERFERES WITH EXISTING FIRE ALARM EQUIPMENT, OR IT IS LOCATED ON
EXISTING WALLS TO BE DEMOLISHED, IT SHALL BE THE RESPONSIBILITY OF THIS CONTRACTOR TO NOTIFY THE
BUILDING OWNER AND RELOCATE IT AT 'THE OWNERS DIRECTION. DO NOT REMOVE F/A DEVICES UNLESS
DIRECTED TO DO SO BY THE BUILDING. IT IS THIS CONTRACTOR'S RESPONSIBILITY TO MAINTAIN FIRE ALARM
SPEAKERS, SMOKE DETECTORS AND OTHER FIRE SAFETY DEVICES IN OPERATION AT ALL TIMES.
IF ANY PERMANENT BUILDING INSTALLATIONS SUCH AS SMOKE DETECTORS, CORRIDOR PA SYSTEMS, FIRE
ALARM STATIONS, ELEVATOR SIGNS, LIGHTING IN ELECTRIC OR PORTERS CLOSETS, PIPE SHAFTS, ELECTRIC
CABS, ETC. ARE TO BE ALTERED OR RELOCATED, THE BUILDING MANAGEMENT OFFICE SHALL BE NOTIFIED
BEFORE PROCEEDING.
THE ELECTRICAL CONTRACTOR MUST COORDINATE THE COMPLETE INSTALLATION WITH THE BUILDIN'S FIRE
ALARM SYSTEM CONTRACTOR. THE ELECTRICAL CONTRACTOR MUST SUBMIT WIRING DAGRAMS (PRODUCED BY
THE BASE BUILDING FA CONTRACTOR) TO THE ENGINEER FOR ANY MODIFICATIONS TO THE FIRE ALARM
SYSTEM. THE ELECTRICAL CONTRACTORS BID SHALL INCLUDE TESTING BY THE BASE BUILDING FA
CONTRACTOR.
11. OPENINGS AROUND ELECTRICAL PENETRATIONS THROUGH FIRE RESISTANCE RATED WALLS, PARTITIONS,
FLOORS OR CEILINGS SHALL BE FIRE STOPPED USING APPROVED METHODS.
12. ALL WORK SHALL BE GUARANTEED AGAINST DEFECTS FOR A PERIOD OF ONE YEAR FROM THE DATE OF
FINAL ACCEPTANCE OF THE INSTALLATION.
13. FINAL CLEANUP AND FIELD TESTS:
AFTER COMPLETION OF THE FINAL INSTALLATION:
A. THE CONTRACTOR, BEFORE FINAL ACCEPTANCE WILL BE GRANTED, SHALL CLEAN ALL DEVICE PLATES AND
ALL OTHER ITEMS INSTALLED UNDER THIS CONTRACT AND SHALL INSURE THAT ALL DIRECTORIES ARE IN
PLACE WITH COMPLETED OR REVISED SCHEDULES AND ALL IDENTIFICATIONS AND MARKINGS OF EQUIPMENT,
CABLES AND OTHER ITEMS ARE COMPLETED.
B. THE CONTRACTOR SHALL REPAIR OR REPLACE AS DIRECTED BY THE ARCHITECT, AT NO ADDITIONAL COSI
TO THE OWNER, ANY ITEM DAMAGED DUE TO INSTALLATION, RELOCATION OR REINSTALLATION.
C. IN ADDITION TO OTHER TESTS WHICH MAY BE REQUIRED IN THE VARIOUS OTHER DISCIPLINES, THE
CONTRACTOR SHALL PERFORM FIELD TESTS IN THE PRESENCE OF THE ARCFIITECT, TO DEMONSTRATE THE
RELIABILITY OFTHE FIRE ALARM INSTALLATION. GIVE THE ARCHITECT 48 HOURS NOTICE IN ADVANCE OF
SUCH TESTS. THE FOLLOWING FIELD TESTS SHALL BE PERFORMED BY THE CONTRACTOR:
1. SHOULD THE FOREGOING TENS REVEAL ANY DEFECTS, PROMPTLY CORRECT SUCH DEFECTS AND
RERUN THE TESTS UNTIL THE ENTIRE INSTALLATION IS SATISFACTORY IN ALL KESPECTs.
14. THE CONTRACTOR SHALL PREPARE AND SUBMIT TO THE ARCHITECT FOR APPROVAL (6) SETS OF
DETAILED SHOP DRAWINGS, CATALOG CUTS AND WIRING DIAGRAMS WHERE APPLICABLE. ANY SUBSTITUTIONS
TO FIRE ALARM ITEMS DESCRIBED ON THIS CONTRACTOR WILL ONLY BE PERMITTED UPON WRITTEN APPROVAL
BY THE ARCHITECT. SHOP DRAWINGS AND CATALOG CUTS WILL BE REQUIRED FOR THE FOLLOWING:
A. FIRE ALARM DEVICES.
1. NO PVC CONDUIT ALLOWED.
2. ALL REUSED DEVICES TO BE RECERTIFIED.
FIRE ALARM NOTES:
1 FA CONTRACTOR SHALL REUSE THE EXISTING FIRE ALARM DEVICES AND
RELOCATE THEM AS SHOWN ON THE DRAWINGS. NEW DEVICES SHALL
BE INSTALLED AS NEEDED TO MATCH THE EXISTING AS REQUIRED.
2 THE BUILDING FIRE ALARM SYSTEM CONTRACTOR, (FIELD VERIFY AIRPORT
SYSTEM) SHALL SUPPLY AND INSTALL A COMPLETE EXTENSION OF THE
EXISTING FIRE ALARM SYSTEM, INCLUDING ALL NECESSARY WIRING. THE
FA CONTRACTOR SHALL BE EMPLOYED BY THE TENANT'S GC TO PREFORM
THE INSTALLATION AND CONNECTION.
3 THE FA CONTRACTOR SHALL PROVIDE DRAWINGS AS REQUIRED AND HIS
BID SHALL INCLUDE TESTING AND DEMOSTRATING THE OPERATION OF THE
SYSTEM TO THE PORT AUTHORITY.
4 THE FA CONTRACTOR SHALL BE RESPONSIBLE FOR THE START-UP AND
PROPER OPERATION OF THE FIRE ALARM SYSTEM.
5 WALL MOUNTED DEVICES SHALL BE MOUNTED AT 80" AFF OR 6" BELOW THE
FINISHED CEILING WHICHEVER IS LOWER.
6 ALL FA DEVICES AND FA JUNCTION BOXES SHALL BE IDENTIFIED IN ACC-
ORDANCE WITH NFPA STANDARD 70. TERMINAL BOXES SHALL BE PAINTED
RED AND STENCILED IN WHITE LETTERS "FIRE ALARM".
7 FA CONDUITS SHALL ENTER ONLY AT THE SIDES OR BOTTOM OF THE
FIRE ALARM TERMINAL BOXES.
8 ALL WIRING TYPES SHALL BE COORDINATED WITH THE BUILDING'S FA
MAINTENANCE CONTRACTOR AND SHALL BE APPROVED BY THE LOCAL
FIRE DEPARTMENT AND ALL AUTHORITIES HAVING JURISDICTION.
THIS DRAWING AS AN INSTRUMENT
OF SERVICE, IS AND SHALL REMAIN
THE PROPERTY OF ARCHITECT.
USE OF THE DRAWING, OR ANY
REPRODUCTION THERE OF, WITHOUT
THE EXPRESS WRITTEN PERMISSION
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION IN DEROGATION OF THIS
ARCHITECTS RIGHTS.
COPYRIGHT 2008
NO.
DATE
REVISION
1
2-22-09
OWNER REVISION
ADJACENT RESTAURANT
FIRE ALARM PLAN
1/W' =1'-0"
I3udson News - Hudson Booksellers
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
ELECTRICAL SYMBOLS AND LEGEND
L[�] FIRE ALARM HORN/STROBE
O0 FIRE ALARM STROBE
J� JUNCTION BOX - SHALL BE ACCESSIBLE AFTER COMPLETION OF CONSTRUCTION
CONNECTION TO PANELBOARD - SUBSCRIPT DENOTES PANEL DESIGNATION
NOTE: ALL FIRE ALARM DEVICES ARE CLASS "B" RATED.
FA CONTRACTOR SHALL VERIFY WITH THE DOA FOR THE FIRE ALARM MANUFACTURER
BEING USED FOR THE EXISTING FIRE ALARM SYSTEM PRIOK TO PURCHASE.
N
NOTE- TO CONTRACTOR:
PRIOR TO BIDDING THE CONTRACTOR SHALL VISIT THE JOBSITE
TO VERIFY FIELD CONDITIONS FOR HIS PARTICULAR TRADE.
IF THERE ARE DISCREPANCIES IN THE CONTRACT DRAWINGS
AND ACTUAL FIELD CONDITIONS THEN THE CONTRACTOR SHALL
PREPARE A BIDD BASED ON ACTUAL FIELD CONDITIONS AND
IMMEDIATLY INFORM THE ARCHITECT IN WRITING OF THE
THE DIS .REPANCIES. IF JOBSTTE IS NOT VISITED PRIOR TO
BIDDING THEN THE CONTRACTOR WILL BE HELD RESPONSIBLE
FOR ABOVE MENTIONED DISCREPANCIES.
--------------
I
� I
I
I
I
\ I I
\ I I
\ APPROVED AIRPORT FIRE ALARM I I
\ CONTRACTOR SHALL CONNECT TO I I
\� THE EXISTING AIRPORT FIRE ALARM I I
\ SYSTEM AS REQUIRED BY THE DOA. I I
� I
0 \
\ I 1
\ I 1
1 ( I
1 I
I
0 11 i I
1----------------,-------
-----� I
1 I
II I
0 `I
I
II
I �
II
I
01�
it
I '
I
0 I
/
/ I
0
TERMINAL A INTERNATIONAL DEPARTURES- UPPER LEVEL
ORLANDO SAN FORD
INTERNATIONAL_ AIRPORT
SANFORD, FLORIDA
DON PENN, P.E.
FLORIDA ENGINEER NO. 0051096 (MECH)
635 WESTPORT PARKWAY, SUITE 300
GRAPEVINE, TEXAS 76051
817-410-2858 FAX 817-251-8411
DRAWN DATE
JVP
CHECKED JOB NUMBER
DP 06,14
E-1.3
SION
EVI
v
II IIII I
It 11
LL_
-
IF
I II III
L__ I
I
/
/
F- IF
111 IIIIJI�
Iii
/ / r=r•1
// �1I I
I
—Ili III
MI
/ ,/J
�Li—Li
I II IIII
I II
L �I—
// rT
�
I I I I
//
/ II
u
7 it 79 I
III IIII II
1 II IIII
11 k
/��LLL
/ / +4 +8
/ I V / �
/II
I 1
1
III IIII II
// /
/�
LIL-2
/
I //
III IIII II
IIIIII I
III 111111
//
/ /10
1 11 III} III
III
LIQ I2 1
/ /
/
/ /
EEE
1
I
�_-�=J11 -
J
/
0
— T I
1=
EE
A
F
I
T—I
Ij I
j
10 I
I I
F
I
1
I
1
0 I
1
I
0 I
F-'�
\ I
I II
I
I II
II
1
\1 0 1
uI
I
� ] III
--- --
I 1 — --- +8
F
h
-
"
ADJACENT RESTAURANT
FIRE ALARM PLAN
1/W' =1'-0"
I3udson News - Hudson Booksellers
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
ELECTRICAL SYMBOLS AND LEGEND
L[�] FIRE ALARM HORN/STROBE
O0 FIRE ALARM STROBE
J� JUNCTION BOX - SHALL BE ACCESSIBLE AFTER COMPLETION OF CONSTRUCTION
CONNECTION TO PANELBOARD - SUBSCRIPT DENOTES PANEL DESIGNATION
NOTE: ALL FIRE ALARM DEVICES ARE CLASS "B" RATED.
FA CONTRACTOR SHALL VERIFY WITH THE DOA FOR THE FIRE ALARM MANUFACTURER
BEING USED FOR THE EXISTING FIRE ALARM SYSTEM PRIOK TO PURCHASE.
N
NOTE- TO CONTRACTOR:
PRIOR TO BIDDING THE CONTRACTOR SHALL VISIT THE JOBSITE
TO VERIFY FIELD CONDITIONS FOR HIS PARTICULAR TRADE.
IF THERE ARE DISCREPANCIES IN THE CONTRACT DRAWINGS
AND ACTUAL FIELD CONDITIONS THEN THE CONTRACTOR SHALL
PREPARE A BIDD BASED ON ACTUAL FIELD CONDITIONS AND
IMMEDIATLY INFORM THE ARCHITECT IN WRITING OF THE
THE DIS .REPANCIES. IF JOBSTTE IS NOT VISITED PRIOR TO
BIDDING THEN THE CONTRACTOR WILL BE HELD RESPONSIBLE
FOR ABOVE MENTIONED DISCREPANCIES.
--------------
I
� I
I
I
I
\ I I
\ I I
\ APPROVED AIRPORT FIRE ALARM I I
\ CONTRACTOR SHALL CONNECT TO I I
\� THE EXISTING AIRPORT FIRE ALARM I I
\ SYSTEM AS REQUIRED BY THE DOA. I I
� I
0 \
\ I 1
\ I 1
1 ( I
1 I
I
0 11 i I
1----------------,-------
-----� I
1 I
II I
0 `I
I
II
I �
II
I
01�
it
I '
I
0 I
/
/ I
0
TERMINAL A INTERNATIONAL DEPARTURES- UPPER LEVEL
ORLANDO SAN FORD
INTERNATIONAL_ AIRPORT
SANFORD, FLORIDA
DON PENN, P.E.
FLORIDA ENGINEER NO. 0051096 (MECH)
635 WESTPORT PARKWAY, SUITE 300
GRAPEVINE, TEXAS 76051
817-410-2858 FAX 817-251-8411
DRAWN DATE
JVP
CHECKED JOB NUMBER
DP 06,14
E-1.3
SION
EVI
ELECTRICAL_ MATERIALS & METHODS:
INSTRUCTION TO BIDDERS:
1. CONTRACTOR SHALL BASE HIS PROPOSAL FOR HIS WORK ONLY AFTER
VISITING THE JOBSITE FOR ACTUAL JOB CONDITIONS WHICH MAY AFFECT
WORK COVERED BY THESE SPECIFICATIONS.
SUBMITTALS:
1. SUBMIT SHOP DRAWINGS & PRODUCT INFORMATION FOR THE FOLLOWING:
* SERVICE & DISTRIBUTION EQUIPMENT
* PROTECTIVE DEVICES
LIGHTING FIXTURES AND LAMPS
* WIRING DEVICES AND COVER PLATES
DISTRIBUTION EQUIPMENT:
1. DISTRIBUTION EQUIPMENT; RATED FOR 240 OR 600 VAC, 60 HZ, FAULT
CURRENT INTERRUPTING CAPACITY AS INDICATED, IN AMPERES, RMS,
SYMMETRICAL, BUT NOT LESS THAN 10,000 AMPS, WITH SOLID
NEUTRAL GROUND (S/N); GENERAL ELECTRIC (G.E.), WESTINGHOUSE,
SQUARE -D, SIEMENS-ALLIS ITE PRODUCTS, CUTLER HAMMER.
2. DISTRIBUTION EQUIPMENT USING CIRCUIT BREAKER TYPE PROTECTIVE
DEVICES; BOLTED -ON OR 'SQUARE D' [-LINE DEVICES.
3. PANELBOARDS; FACTORY ASSEMBLED, MINIMUM WIDTH OF 20 INCHES, A
MINIMUM DEPTH OF 5-3/4 INCHES, AND MINIMUM MAINS RATED 100
AMPERES, WITH POLE 'SPACES'; BUSSED AND READY FOR INfALLATIQN
OF PROTECTIVE DEVICES. CABINETS; FULL SIZED SINGLE DOORS WITH
CHROMIUM PLATED COMBINATION CYLINDER LOCK AND CATCH AND TWO
KEYS. "GENERAL ELECTRIC" OR EQUAL: TYPE "NLAB" W/ Q -LINE
BRANCH CIRCUIT- BREAKERS; TYPE "NI -113" WITH E -FRAME BREAKERS.
4. PANELBOARD MAINS; COPPER OR ALUMINUM WITH BRANCH CONNECTIONS
IN VERTICALLY DISTRIBUTED CONSECUTIVE PHASE SEQUENCE SUCH THAT
ONE OR MULTIPLE POLE BREAKERS CAN BE MOUNTED IN ANY POSITION.
SOLID NEUTRAL BUS; WITH A FEEDER LUG AND WITH A SEPARATE
SET -SCREW TERMINAL FOR EACH BRANCH CIRCUIT POLE.
S. PANELBOARD MOUNTING; TOP OF ENCLOSURE 78 INCHES ABOVE THE
FINISHED FLOOR/GRADE, WITH THE BOTTOM OF THE CABINET NOT
CLOSER THAN 6 INCHES TO THE FLOOR/GRADE, PROPERLY ALIGNED AND
SUPPORTED INDEPENDENTLY OF THE CONNECTING RACEWAYS. COMPLETE
INSIDE CIRCUIT DIRECTORY CARD USING A TYPEWRITER.
6. DISCONNECT SWITCHES; 'HEAVY-DUTY' RATED WITH QUICK -MAKE AND
QUICK -BREAK MECHANISMS. PROVIDE GROUND LUGS AND CODE REQUIRED
ACCESSORIES. SWITCHES LOCATED OUTSIDE; 'NEMA -3R' ENCLOSED
TYPE WITH LOCKING HASP.
7. PROVIDE AN ENCLOSED SWITCH FOR ELECTRICALLY SERVED EQUIPMENT.
PROVIDE SWITCHES & FUSES, INCLUDING HEATER ELEMENTS, RATED PER
THE CHARACTERISTICS AND NAMEPLATE RATINGS OF EQUIPMENT IN
ACCORDANCE WITH CODE REQUIREMENTS, MANUFACTURER'S
RECOMMENDATIONS AND CHARTS. PROVIDE SWITCHES WITH CODE
REQUIRED ACCESSORIES.
8, FUSED SWITCHES IN BRANCH CIRCUITS; NON-RENEWABLE CARTRIDGE
FUSES RATED 250 OR 300 VAC OR 600VAC AS FOLLOWS:
* SIZES 'I - 200 AMPS: DUAL ELEMENT, CURRENT LIMITING FUSES,
CLASS 'RK -1', OR 'RK -5', SELECTED TO PROVIDE STARTING AND
LIMIT LET-THRU CURRENT.
* OTHER RATINGS, SIZES OR SPECIAL APPLICATIONS AS
INDICATED.
9. STATIONARY FRACTIONAL HORSEPOWER MOTORS NOT PROVIDED WITH
INTEGRAL MOTOR RUNNING OVF-RLOAD PROTECTION, OR INHERENTLY
PROTECTED BY DESIGN; SWITCHED BY A FRACTIONAL HORSEPOWER
STARTER PROVIDING SUPPLEMENTARY PROTECTION.
10. STARTERS AND DISCONNECT SWITCHES; ENCLOSED QUICK -MAKE AND
QUICK -BREAK MECHANISMS.
11. BRANCH CIRCUIT BREAKERS; MOLDED CASE, AUTOMATIC TRIPPING TYPE,
BOLT -ON OR I -LINE CONSTRUCTION, MINIMUM FRAME SIZE OF '100
AMPS AND A MINIMUM TRIP SIZE OF '15 AMPS, CALIBRATED FOR 40oC.
PROVIDE SUITABLE TYPE BREAKERS SERVING HIGH INRUSH CIRCUITS
FOR INCANDESCENT LIGHTING.
'12. GROUP SINGLE -POLE BREAKERS USED FOR MULTI -WIRE CIRCUITS
CONSECUTIVELY ON THE SAME SIDE OF THE CABINET.
CONDUCTORS:
1 . CONDUCTORS; SOFT DRAWN, ANNEALED COPPER WITH CONDUCTIVITY OF
NOT LESS THAN 98 % BY 'ASTM' STANDARDS.
2. CONDUCTOR SIZE NUMBERS; AMERICAN WIRE GAUGE (AWG. SYSTEM,
STANDARD TRADE SIZES.
3. CONDUCTORS; COLOR CODED PER CODE AND UTILITY CO.
4. CONDUCTORS;
No. 12 AWG SIZE AND SMALLER; SOLID.
h NoA 0 AWG SIZE; SOLID OR STRANDED.
* No.8 AWG SIZE AND LARGER; STRANDED. STRANDED CONDUCTORS;
CLASS B' OR 'C'.
* CONTROL CIRCUITS; MINIMUM AWG No. 14.
* POWER AND LIGHTING BRANCH CIRCUITS; AWG # 12 FOR GENERAL
CIRCUITS NOT REQUIRING DERATING OR SIZE INCREASE TO
REDUCE VOLTAGE DROP.
* CODING AS INDICATED:
120/208 VOLT- SYSTEM:
PHASE A -BLACK
PHASE B -RED
PHASEC-BLUE
NEUTRAL -WHITE
GROUND -GREEN
277/480 VOLT SYSTEM:
PHASE A -BROWN
PHASE B -ORANGE
PHASE C -YELLOW
NEUTRAL -WHITE W/TRACER
GROUND -GREEN
5. USE A SPERATE LUG FOR EACH CONDUCTOR WHERE MULTIPLE CONDUCTORS
ARE CONNECTED TO THE SAME ELECTRICAL TERMINAL POSITION
6. FEEDER CONDUCTORS (TO INCLUDE SUB -FEEDER); IJNSPLICED
THROUGHOUT "THEIR LENGTH.
7. BRANCH CIRCUIT CONDUCTORS; UNSPLICED EXCEPT WHERE CIRCUITS ARE
SHOWN TO DIVIDE BY THE PLANS.
8. GENERAL WIRING CONDUCTORS OPERATING AT 600 VOLTS AND BELOW;
RATED 60 HERTZ, 600 VOLTS, WITH 75oC OR 90oC INSULATION AS
FOLLOWS:
A. FEEDER CONDUCTORS: RATED FOR WET LOCATIONS OF 'THW% .
'TFIWN' OR 'XHHW'.
B. BRANCH CONDUCTORS RATED FOR:
* WET LOCATIONS, OR LOCATIONS LOCATED BELOW GRADE OR
ENCASED IN SLAB ON GRADE, OF 'THW', 'THWN' OR
'XHHW'.
* DRY LOCATIONS OF 'THW', 'THWN', 'XHHW' OR 'THHN'.
C. RATED LIGHTING CONDUCTORS FOR CIRCUITS REQUIRING 900C
RATING; 'THHN' OR 'XHHW', OR OTHER APPROVED TYPE.
D. JOINTS ON CONDUCTORS RATED ABOVE 75oC; TAPED OR MADE-UP
WITH MATERIALS HAVING A SUITABLE HIGH TEMPERATURE RATING.
RACEWAYS:
'I. INSTALL WIRING IN METALLIC, RIGID TYPE RACEWAYS.
2. RUN RACEWAYS AND CABLE CONCEALED, EXCEPT RACEWAYS IN EQUIPMENT
ROOMS RUN EXPOSED.
3. RACEWAYS IN ORDINARY LOCATIONS:
* BURIED BELOW GRADE OR SLAB; SCH. 40 PVC CONDUIT, EXCEPT
WHERE SCH. 80 IS REQUIRED BY THE UTILITY CO. OR CODE DUE
TO INSTALLATION CONFIGURATION.
* INSIDE (NOT IN WET OR DAMP LOCATIONS OR EXPOSED TO
MECHANICAL INJURY); STEEL, ELECTRICAL METALLIC TUBING
(EMT).
* EXPOSED OUTSIDE, THROUGH OUTSIDE WALL OR ROOF, OR THROUGH
TWO-HOUR OR MORE RATED FIRE BARRIERS; GALVANIZED RIGID
STEEL (GRS) CONDUIT MADE UP WATER TIGHT.
FINAL CONNECTION IN DRY LOCATIONS SERVING LIGHTING
FIXTURES; FLEXIBLE METAL CONDUIT OR FLEXIBLE METALLIC
TUBING.
CONNECTIONS TO MOTORS, OR TO COMPONENTS IN WET OR DAMP
LOCATIONS, LIQUIDTIGHT FLEXIBLE METAL CONDUIT (LT FLEX).
4. RIGID STEEL GRS, AND STEEL IMC; HOT DIP GALVANIZED
5. STEEL EMT; HOT DIP GALVANIZED OUTSIDE, AND ENAMEL OR
GALVANIZED FINISHED INSIDE.
6. EMT COUPLINGS AND CONNECTORS; METAL AS FOLLOWS:
* RAINTIGH T, HEX -NUT, EXPANSION- GLAND COMPRESSION STEEL,
FOR ANY WET OR DAMP LOCATION OR FEEDER (OR SUB -FEEDER..
SET -SCREW OR TAP -ON, STEEL OR CAST METAL, FOR DRY
LOCATIONS.
7. CIRCULAR RACEWAYS; MINIMUM TRADE SIZE AS FOLLOWS:
3/4 -INCH; 'HOMERUN' CIRCUIT WIRING;
MORE THAN (3) CONDUCTORS.
8. SIZE RACEWAYS TO ACCOMMODATE THE ENCLOSED CONDUCTORS.
9. PROVIDE JUNCTION OR PULL BOXES TO AVOID EXCESSIVE RUNS OR
BENDS BETWEEN OUTLETS, AND AT LOW POINTS IN RACEWAY RUNS,
10. SUPPORT CONCEALED CONDUIT ABOVE THE CEILING INDEPENDENTLY OF
CEILING CONSTRUCTION. INSTALL CONDUITS HIGH ABOVE LAY -IN
CEILINGS TO PERMIT REMOVAL OF CEILING PANELS OR EQUIPMENT.
INS -FALL EXPOSED RACEWAYS PARALLEL OR PERPENDICULAR TO
STRUCTURAL MEMBERS AND ARCHITECTURAL FEATURES. INSTALL
CONCEALED CONDUIT RACEWAYS WITH AS FEW BENDS AS FEASIBLE,
COORDINATED WITH STRUCTURAL, MECHANICAL AND ARCHITECTURAL
REQUIREMENTS. ROUTE RACEWAYS TO AVOID 'TRAPPING' WHERE
PRACTICABLE.
ENCLOSURES AND BOXES:
1. EQUIPMENT ENCLOSURES, BOXES, & COVERS; GALVANIZED STEEL,
MALLEABLE IRON, GRAY IRON, OR COPPER -FREE ALUMINUM. SCREWS;
STAINLESS STEEL; ALUMINUM FOR ALUMINUM BOXES.
2. ENCLOSURES:
" FLUSH MOUNTED WITH CONCEALED RACEWAYS OR FLUSH MOUNTED
DEVICES.
* SURFACE MOUNTED TYPE IN EQUIPMENT ROOMS, WITH EXPOSED
RACEWAYS AND OTHER SURFACE MOUNTED DEVICES.
3. BOXES FOR USE WITH GENERAL RACEWAY SYSTEMS; 4 INCHES SQUARE OR
OCTAGONAL SIZE, NOT BE LESS THAN 1-1 /2 INCHES DEEP, EXCEPT
WHERE SHALLOWER BOXES ARE REQUIRED BY STRUCTURAL CONDITIONS.
4 BY 2 INCH BOXES; WHERE ONLY ONE RACEWAY ENTERS AN OUTLET
BOX, OR WHERE NEEDED TO MATCH DEVICES AND/OR MOUNTING
HARDWARE.
4. DO NOT USE SUSPENDED CEILING CONSTRUCTION TO SUPPORT RACEWAYS,
BOXES OR OTHER ITEMS, EXCEPT AS ALLOWED BY CODE AND ACCEPTED
BY THE ARCHITECT IN WRITING.
DEVICES:
1. SWITCHES; STANDARD LINE STYLE, MAINTAINED, 15 OR 20 AMPS, 120-
"277 VAC, QUIET OPERATING, FLUSH MOUNTING, BY LEVITON, 'SPEC -
MASTER, COMMERCIAL SPEC. GRADE' SERIES, HUBBELL OR ARROW HART.
2. RECEPTACLES; STANDARD LINE STYLE, STRAIGHT BLADE, 2 -POLE, 3 -
WIRE GROUNDING TYPE, RATED'125 VAC, 15 OR 20 AMPS, BY LEVITON,
'SPECMASTER, 'COMM. SPEC. GRADE' SERIES, HUBBELL OR ARROW
HART.
3. DIMMER SWITCHES; RATED FOR FULL RANGE DIMMING OF 120 VAC
LOADS, EITHER FLUORESCENT OR INCANDESCENT, KNOB OR SLIDE
CONTROLLED W/ FULL OFF POSITION, FLUSH MOUNTABLE IN STANDARD
1 -GANG OR 2 -GANG BOXES. ARCHITECTURAL' STYLE, THIN PROFILE
TYPES, BY LEVITON, 'COMM. SPEC. GRADE' SERIES, LUTRON OR
LITHONIA.
4. GROUND FAULT CIRCUIT INTERRUPTED (GFCI) RECEPTACLES; U.L.
LISTED FOR PERSONNEL PROTECTION AGAINST LINE -TO- GROUND SHOCK
HAZARD. GFCI RECEPTS.; DUPLEX, 'DECORA STYLE' BY LEVITON,
'COMM. SPEC. GRADE', HUBBELL OR ARROW HART.
S. KEYLESS LAMPHOLDER: WHITE PORCELAIN, 660 WATTS AT 250 VOLTS;
LEVITON, CAT. No. 9875-2.
6. COVER PLATES: FOR FLUSH, INSIDE, WALL MOUNTED DEVICES;
LEVITON.
7. INSTALL WIRING DEVICES WITH TOP -OF -BOX MOUNTING HEIGHTS ABOVE
FINISHED FLOORS AS FOLLOWS: FOR RECEPTACLES 18 INCHES AND 48
INCHES FOR SWITCHES AS REQUIRED BY HANDICAPPED CODES.
THIS DRAWING AS AN INSTRUMENT
OF SERVICE, IS AND SHALL REMAIN
THE PROPERTY OF ARCHITECT.
USE OF THE DRAWING, OR ANY
REPRODUCTION THERE OF, WITHOUT
THE EXPRESS WRITTEN PERMISSION
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION IN DEROGATION OF THIS
ARCHITECTS RIGHTS.
COPYRIGHT 2008
LIGHTING:
1. FLUORESCENT BALLASTS; HIGH POWER FACTOR (HPF) TYPE, CLASS 'P'
PROTECTED, SOUND RATING •A', AND ENERGY SAVING TYPE.
2. FLUORESCENT BALLASTS FOR THE MINI -LAMPS; U.L. LABELED OR
ACCEPTABLE TO BUILDING OFFICIALS, ENCAPSULATED, QUIET
OPERATING DESIGN IF AVAILABLE.
3. ORIENT FLUORESCENT LAMPS WITHIN THE SAME VISUAL SPACE IN THE
SAME DIRECTION.
GROUNDING:
1. GROUND ELECTRICAL SYSTEMS, EQUIPMENT, AND SUPPORTING
STRUCTURES. PROVIDE BONDING JUMPERS WHERE NECESSARY.
MECHANICALLY AND ELECTRICALLY SECURE METAL RACEWAYS AND
FITTINGS, JOINTS AND CONNECTIONS AT EQUIPMENT TO PROVIDE AN
GROUNDING MEANS. METAL RACEWAYS; ELECTRICALLY CONTINUOUS
THROUGHOUT THEIR LENGTH FOR AN EFFECTIVE GROUNDING PATH TO THE
POWER SERVICE DISCONNECT SWITCH.
2. INSTALL GROUNDING CONDUCTORS WITHOUT JOINT OR SPLICE TO THE
GREATEST PRACTICAL EXTENT.
3. PROVIDE FOR EACH RACEWAY A GREEN #12 GROUNDING CONDUCTOR IN
ADDITION TO BRANCH CONDUCTORS INDICATED.
4. DO NOT SPLICE MAIN BONDING JUMPER. CONFIRM THAT A MAIN BONDING
JUMPER IS PROVIDED AT THE POINT OF SERVICE ONLY.
5. GROUND BOTH NEUTRAL AND GREEN ISOLATED GROUNDING TYPE
CONDUCTORS FOR ISOLATED GROUNDING CIRCUITS AT ONE POINT OF
GROUND OF SEPARATELY DERIVED ELECTRICAL SYSTEM.
TESTING:
1. TEST INDIVIDUAL SYSTEMS AND COMPONENTS FOR FULL FUNCTIONAL
REQUIREMENTS. PERFORM TESTS AS REQUIRED BY CODE, LOCAL
PRACTICES, OR AS REASONABLY REQUIRED BY THE OWNER'S
REPRESENTATIVE WHERE A QUESTION ARISES AS TO THE PROPER
INSTALLATION OR OPERATION OF MATERIALS.
2. PROVIDE TESTING INSTRUMENTS, PROCEDURES, AND DOCUMENTATION.
MISCELLANEOUS:
1. MAJOR COMPONENTS OF THE DISTRIBUTION SYSTEM SUCH AS THE
PANELBOARD, DISCONNECT SWITCHES... ETC. SHALL HAVE PERMANENT
NAMEPLATES FOR EQUIPMENT IDENTIFICATION. PROVIDE NAMEPLATE ON
SERVICE DISCONNECT IN "TDP" PANEL AND POWER COMPANY METER
TO INDICATE TENANT SPACE NUMBER AND SPACE LEVEL.
2. IN RACEWAY OR CABLE, ETC. THAT PENETRATES A FIRE BARRIER,
WITH MATERIALS AND METHODS APPROVED FOR APPLICATION BY
BUILDING OFFICIALS. IDENTIFY EACH FIRE BARRIER FROM THE
ARCHITECTURAL PLANS, AND FOR SECURE APPROVAL OF MATERIALS AND
METHODS FOR EACH TYPE PENETRATION.
3. ROOF PENETRATIONS SHALL BE COORDINATED WITH LANDLORD'S REPRESENT-
ATIVE. ALL ROOF CUTTING/PATCHING SHALL EB BY LANDLORD'S ROOFING
CONTRACTOR AT TENANT'S EXPENSE,
4. PROVIDE APPROVED "MEANS OF DISCONNECT" FOR STOREFRONT SIGN(S).
5. PROVIDE NAMEPLATES FOR ALL ROOF MOUNTED DISCONNECT SWITCHES.
WITH SPACE NAME, NUMBER AND MALL LEVEL INFORMATION.
6. PROVIDE ACCESS PANELS AT ALL LANDLORD INSTALLED ELECTRICAL DEVICES
AND EQUIPMENT ABOVE HARD CEILINGS. ACCESS PANELS TO BE SIZED
IN THE FIELD FOR EACH APPLICATION.
TELEPHONE SYSTEM ROUGH -IN:
1. PROVIDE COMPLETE ENCLOSED RACEWAYS WITH MEASURED PULL CORDS
FOR FUTURE USE BY OTHERS. PROVIDE A 1 " CONDUIT FROM LANDLORD'S
MAIN TERMINAL LOCATION TO TENANT'S SPACE.
TEMPORARY WIRING DURING CONSTRUCTION:
1. PROVIDE TEMPORARY ELECTRICAL DISTRIBUTION WIRING AND RELATED
SERVICES AS REQUIRED.
2. PAY THE COST OF ELECTRICITY FOR THE TEMPORARY SERVICE WHERE
THE LANDLORD DOES NOT PAY DIRECTLY FOR THESE UTILITY SERVICES.
T
VERIFY
u
ANGLE 3"x3"x1/2" (L.L.V.) WELD TO BOTTOM
CHORD OF EXIST. JOIST (2 READ.)
ANGLE3"x3"x1 /2" (L:L.V.) MINIMUM OF 96"AFF
2 -REQUIRED.
STEEL ABOVE
-E -<TYP.
RODS THRD. EACH
(4 READ.)
4TION ISOLATORS
UND OR EQUAL
TRANSFORMER MOUNTING DETAIL
NTS
NO.
DATE
REVISION
1
2-22-09
OWNER REVISION
0 PANELBOARD SCHEDULE "L"
MAINS: 100 A MCB
VOLTAGE: 120/208V
PHASE: 3
WIRE: 4 MOUNTING: SURFACE
CIRC.
NO.
'TRIP
POLE
DESCRIPTION
CONNECTED LOAD (KVA)
DESCRIPTION
TRIP
POLE
CIRC.
NO
PHASE A
PHASE B
PHASE C
1
20/1
SALES LIGHTING
1.5 1.6
OPEN FACE
COOLER
20/2
"2
3
20/1
SALES LIGHTING
1.3 1.6
4
5
20/1
ENTRY DN. LTS. (VIA TC
8 1.6
OPEN FACE
COOLER
20/2
6
7
20/1
WALL CASE LTS.
1.8 1.6
8
9
20/1
WALL CASE LTS.
1.8 .8
RECEPT/FUT. TV
20/1
10
1 1
20/1
WALL CASE LTS.
1.8 1.6
FUTURE OPEN
FACE COOLER
20/2
'12
13
20/1
CASH REGISTER
.8 1.6
14
15
20/1
CASH REGISTER
.8 .8
SIGNS (VIA TC)
20/1
16
17
20/1
CASH REGISTER
.8 .6
DIGITAL PROC/TV
20/1
18
19
20/1
CASH REG. IG QUADS
1.2 X
SPARE
20/1
2U
21
20/1
TELEPHONE
.2 X
SPARE
20/1
22
23
20/ l
LTG. CONTACTOR
2 X
SPARE
20/1
24
25
20/ 1
TIME CLOCK
.2 X
SPACE
1 P
26
27
IP
SPACE
X X
SPACE
1P
28
29
'1P
SPACE
X X
SPACE
1P
30
MIN. BREAKER A.I.C. 10,000
10.3
7.3
7.4
TOTAL CONNECT LOAD: 2 5. 0 KVA
TOTAL DEMAND LOAD: 20.5 INA
NOTE:
ALL LIGHTING CIRCUITS TO BE ROUTED THRU THE LIGHTING CONTACTOR(S) AS REQUIRED.
CONTRACTOR SHALL PROVIDE A 1 1 5 DEG-
REE HIGH EFFENECY TRANSFORMER AS
REQUIRED BY THE AIRPORT AUTHORITY.
#8(G) TO BLDG. STEEL AND
MAIN METAL COLD WATER PIPE
3 #8, 1 #10(G), 3/4"C
T
30 KVA
II 480-208
3 PH
4 #2, 1 #8(G), 1-1/4"C
NOTE TO CONTRACTOR:
WHEN THE CONTRACTOR OBSERVES ERRORS,
DISCREPANCIES, OMISSIONS OR AMBIGUTIES IN THE
CONTRACT DOCUMENTS, CONTRACTOR SHALL
IMMEDIATLEY, IN WRITING, REFER SAME TO THE ARCH-
ITECT FOR THE ARCHITECT'S WRITTEN INTERPRETATION OR
CORRECTION. IF CONTRACTOR SHALL FAIL TO GIVE
NOTICE OF SUCH WORK BEFORE CONSTRUCTION OR
FABRICATION OF THE WORK, CONTRACTOR WILL BE
HELD RESPONSIBLE FOR THE RESULT OF SUCH ERROR,
DISCREPANCY OR OMISSION.
PNL" L"
1 20/208V,
3PH, 4W
100 AMP
MCB
I 60/3/NF
1 " CONDUIT WITH PULL -
CORD TO AIRPORTS
NEAREST MAIN TELEPHONE
BACKBOARD AS REQUIRE _�.
TELEPHONE
BACKBOARD
TENANT'S AIRPORTS ELECTRICAL
SPACE ROOM
TIME
CLOCK
LIGHTING
CONTACTOR
14
ELECTRICAL L RISER DIAGRAM
SCALE: NONE
a A
j I
Hudson News Hudson booksellers
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
TERMINAL A -INTERNATIONAL DEPARTURES- UPPER LEVEL
ORLANDO SANFORD
INTERNATIONAL AIRPORT
SANFORD, FLORIDA
3 #8, 1 #10(G), 3/4"C
NOTE:
CONDUIT AND CONDUCTORS ARE
SIZED FOR 200'-0", IF THE DIS-
TANCE FROM TENANT PANEL TO
AIRPORT PANEL IS GREATER THE
CONTRACTOR SHALL CONTACT THE
ENGINEER FOR THE RESIZING OF
CONDUIT AND CONDUCTORS PRIOR
TO BIDING.
(50/3)
AIRPORT PNL
277/48OV,
3PH, 4W
CONTRACTOR SHALL FIELD VER-
IFY THE LOCATION OFTHE 480V/3PH
PANEL THAT WILL BE SERVING THE
SPACE AND THE ROUTING OF CONDUIT
AND CONDUCTORS TO THE SPACE PRIOR
TO BIDDING.
DON PENN, P.E.
FLORIDA ENGINEER N0. 0051096 (MECH)
635 WESTPORT PARKWAY, SUITE 300
GRAPEVINE, TEXAS 76051
817-410-2858 FAX 817-251-8411
DRAWN DATE
JVP
CHECKED JOB NUMBER
DP 0314
HVAC SPF_CIFICATIONS.4
SCOPE OF WORK:
'I. SCOPE OF WORK FOR THE PROJECT SHALL CONSIST OF PROVIDING ALL LABOR,
MATERIAL, EQUIPMENT, HOISTING AND OTHER ITEMS AS NECESSARY FOR A
COMPLETE OPERATIONAL HVAC SYSTEM.
2. MECHANICAL CONTRACTOR SHALL VISIT- THE SITE PRIOR TO PROVIDING; BIDS
AND COMMENCEMENT OF WORK AND SHALL FAMILIARIZE HIMSELF WITH ALL
EXISTING CONDITIONS SO THAT ANY CONDITIONS READILY VISIBLE TO THE EYE
WHICH RELATES TO HIS WORK SHALL BE PROVIDED FOR AT NO ADDITIONAL
EXPENSE TO THE OWNER.
3. ALL WORK SHALL BE INSTALLED IN A PROFESSIONAL MANNER, AND THE
ARCHITECT RESERVESTHE RIGHT 'TO HAVE CONTRACTOR REMOVE AND REPLACE
OR REPAIR ANY WORK WHICH IS DEEMED INFERIOR TO ACCEPTABLE
STANDARDS.
4. ALL WORK SHALL CONFORM TO THE 2006 INTERNATIONAL MECHANICAL CODE AND
WITH THE 2006 FLORIDA BUILDING CODE, AIRPORT AUTHORITY AND LOCAL OFFICALS TO
INCLUDE THE LOCAL ENERGY CODE. CONTRACTOR SHALL PROVIDE FOR ALL PERMITS,
FEES AND OTHER COSTS ASSOCIATED WITH LOCAL JURISDICTION HAVING AUTHORITY.
5. CONTRACTOR SHALL SCHEDULE HIS WORK AS FAST AS THE JOB SCHEDULE
PERMITS SO AS TO NOT HINDER THE WORK OF OTHER TRADES.
6. NO EQUIPMENT SHALL BE OPERATED DURING CONSTRUCTION UNTIL SUCH TIME
AS CONTRACTOR IS NOTIFIED THAT SYSTEMS ARE READY TO BE STARTED FOR
FINAL DELIVERY TO THE OWNER.
PRODUCTS:
I. PRODUCTS FOR THE LAYOUT BASIS HAVE BEEN SELECTED FROM A SINGLE
MANUFACTURER. CONTRACTOR MAY AT HIS OPTION PROVIDE EQUIPMENT OF
ANOTHER MANUFACTURER PROVIDED HE ENSURES THAT HIS SELECTION WILL
FIT WITHIN THE SPACE PROVIDED.
2. ALL EQUIPMENT SHALL BE NEW AND SHALL BE PROVIDED WITH A FULL
MANUFACTURER'S WARRANTY EXTENDED TO THE OWNER.
3. SPECIAL ATTENTION SHALL BE PROVIDED TO VOLTAGE REQUIREMENTS OF
EQUIPMENT. CONTRACTOR SHALL COORDINATE REQUIREMENTS WITH
ELECTRICAL BEFORE ORDERING OR INSTALLING.
AIR DISTRIBUTION:
1. INSTALL A NEW AIR DISTRIBUTION SYSTEM PER PLANS AND SPECIFICATIONS.
DUCTWORK SHALL BE GALVANIZED SHEET METAL WITH JOINTS SEALED WITH DUCT MASTIC
PER MANUFACTURER RECOMMENDATIONS.
2. WRAP ALL DUCTWORK WHICH WILL BE CONCEALED AFTER BUILDING FINISHES WITH
FOIL -FACE 2" THICK DUCT WRAP WITH JOINTS LAPPED AND STAPLED. ALL DUCTWORK
TO BE EXPOSED UPON COMPLETION OF BUILDING FINISHES SHALL BE INTERNALLY LINED
WITH '1 " THICK DUCT LINER. ALL EXPOSED DUCTWORK SHALL SUSPENDED STRAIGHT AND
LEVEL. FINAL PAINTING SHALL BE BY OTHERS.
4. BALANCING DAMPERS SHALL BE PROVIDED WHERE INDICATED FOR BALANCING OF
SUPPLY AIR IN THE SPACE.
5. ALL ROUND RUN -OUTS SHALL BE MADE WITH SPIN -IN FITTINGS WITH SCOOP AND
ADJUSTABLE DAMPER WITH LOCK NUT. WHERE MORE THAN ONE DIFFUSER IS
SERVED FROM A SINGLE RUN -OUT, DIFFUSERS SHALL BE EQUIPPED WITH
BALANCING DAMPERS IN THE THROAT OF SUCH DEVICES.
6. MAXIMUM LENGTH OF FLEXIBLE DUCTWORK IS 5'-0"
7. AIR DISTRIBUTION DEVICES SHALL BE ALL SELECTED FROM THE SAME
MANUFACTURER AND SHALL BE PROPERLY SELECTED FOR CEILING OR WALL FINISH.
COORDINATE FINISHES WITH ARCHITECTURAL DRAWINGS. PRIOR TO
INSTALLING FACE PLATES, SPRAY PAINT ALL PARTS VISIBLE THRU THE FACE
FLAT BLACK. CONTRACTOR SHALL COORDINATE EXACT CEILING DIFFUSER
PLACEMENT WITH LIGHTING FIXTURES AND SPRINKLER HEADS AND SHALL
MAKE ADJUSTMENTS AS NECESSARY. REFER TO ARCHITECTURAL CEILING PLAN
AS NECESSARY.
HVAC EQUIPMENT:
1. EXISTING AIRPORT SUPPLY AIR AND VAV UNITS BY THE ORLANDO SANFORD AIRPORT
AUTHORITY UNLESS DIRECTED OTHERWISE.
EXECUTION:
1. CONTRACTOR SHALL EXECUTE HIS WORK AS FAST AS THE JOB SCHEDULE
PERMITS WITHOUT DISRUPTING THE WORK OF OTHER TRADES. COORDINATE
CONTROL AND POWER WIRING WITH DIVISION 16.
2. ALL WORK SHALL BE WARRANTED FOR A PERIOD OF ONE YEAR WITH AN
ADDITIONAL 4 YEAR WARRANTY ON THE AIR CONDITIONING UNIT COMPRESSOR(S)
MANUFACTURER.
MECHANICAL RENOVATION NOTES:
1. VISIT THE SITE AND CAREFULLY EXAMINE THE EXISTING CONDITIONS
BEFORE SUBMITTING BIDS, AS NO ALLOWANCE WILL BE MADE FOR LACK
OF KNOWLEDGE OF EXISTING CONDITIONS WHERE SUCH CONDITIONS MAY
REASONABLY BE DETERMINED BY OBSERVATION.
2. THE EXISTING INSTALLATION IS TO REMAIN IN PLACE AND IN SERVICE
EXCEPT AS OTHERWISE INDICATED OR SPECIFIED. ALL WORK NECESSARY
.FO'PROPERLY TIE IN THE NEW WORK WITH THE EXISTING WORK AND
ADAPT THE EXISTING INSTALLATION TO THE CHANGES IN THE BUILDING
AND IN THE SYSTEMS SHALL BE PERFORMED.
3. EXPOSED DUCTWORK, PIPING AND CONTROLS RENDERED USELESS DUE TO
CHANGES IN THE BUILDING SHALL BE REMOVED AS NOTED.
4. CONCEALED DUCTWORK, PIPING AND CONTROLS EXPOSED BY THE REMOVAL
OF WALLS, PARTITIONS, ETC., SHALL BE REMOVED OR RECONNECTED AS
REQUIRED.
i
5. ALL EXISTING DIFFUSER DROPS TO BE REMOVED BACK TO TRUNK DUCT,
CAPPED AND SEALED. CONTRACTOR SHALL PROVIDE NEW FLEXIABLE DUCT
AND NEW TAP WITH VOLUME DAMPER AS INDICATED.
6. ALL EQUIPMENT WHICH IS TO REMAIN IN SERVICE, BUT TEMPORARILY
DISCONNECTED DUE TO THE ALTERATIONS TO THE BUILDING OR
SYSTEMS, SHALL BE RECONNECTED AND RESTORED TO ITS ORIGINAL
OPERATING CONDITION.
7. THE SIZE AND LOCATION OF EXISTING EQUIPMENT AND DUCTWORK SHOWN
ON THE DRAWINGS SHALL BE VERIFIED AT THE SITE.
8. EXISTING MATERIAL THAT IS REMOVED AND NOT REUSED SHALL BECOME
THE PROPERTY OF THE CONTRACTOR AND SHALL BE REMOVED FROM THE
PREMISES.
9. WHERE EXISTING INSULATION IS DAMAGED DUE TO NEW WORK, IT SHALL
BE REPAIRED TO MATCH THE EXISTING INSULATION TO THE DAMAGED
PORTION REPLACED WITH INSULATION OF THE TYPE SPECIFIED FOR THE
NEW WORK.
10. SPRINKLER HEADS ARE EXISTING. CONTRACTOR SHALL RELOCATE HEADS
AS REQUIRED TO MEET THE NEW ARCHITECTURAL LAYOUT AND CEILING
HEIGHTS. ALL NEW SPRINKLER HEADS AND PIPING SHALL BE INACCORDANCE
WITH THE LOCAL FIRE MARSHALL, CODES AND PER THE LANDLORD INSURANCE
UNDERWRITERS. CONTRACTOR SHALL SUBMIT DRAWINGS AS REQUIRED TO
THE FIRE MARSHALL FOR APPROVAL.
11. ALL EXISTING SUPPLY AND RETURN DIFFUSERS TO BE REMOVED.
HANGER SUPPORTS:
45 DEG TAKE-
OFF FITTING:
WITH VOLUME
....................................... DAMPER
SIZES SHOWN
ARE FREE
AREA
MINIMUM RADIUS EQUAL
TO THE FLEX DUCT
DIAMETER
SADDLE
2" HANGER STRAP (TYPICAL)
SHEET METAL
FOR RUN -OUTS GREATER THAN 6',
WITH INSULATION @ R=8.0
EXISTING VAV BOX SCHEDULE
MARK
M ETALU NA
CFM MAX.
KW
VOLTS/PHASE
UNIT TYPE
MANUFACTURER
Architec rJ I- e •'
t e & DesiEn LC.
---
1200
1665 Highway a 88
120V, 1 PH.
VFREM
Ellisville MIS 39437
\. ................
.. ��o�< ................:
.::..::::..:...:..:
. .
TEL 601.91 ,1,6909
F
FAX I .
X �0 763.4886 .\\
._
,.
Of
-
:
B 24
1 2
...:..:.
P CA
F T -F/ -..l
. f..
\/\(,Nvv.METALUNAarchitects.com
LTL-
IF
F
f +]
I t + iF_
metal emsuna mindsP rin
1- ;i !
%:
.coal
II III
HANGER SUPPORTS:
45 DEG TAKE-
OFF FITTING:
WITH VOLUME
....................................... DAMPER
SIZES SHOWN
ARE FREE
AREA
MINIMUM RADIUS EQUAL
TO THE FLEX DUCT
DIAMETER
SADDLE
2" HANGER STRAP (TYPICAL)
SHEET METAL
FOR RUN -OUTS GREATER THAN 6',
WITH INSULATION @ R=8.0
EXISTING VAV BOX SCHEDULE
MARK
CFM MIN.
CFM MAX.
KW
VOLTS/PHASE
UNIT TYPE
MANUFACTURER
VAV-1
---
1200
2
120V, 1 PH.
VFREM
ENVIRO-TEC
NOTES:
1. CONTRACTOR SHALL FIELD VERIFY CAPACITY OF VAV AND REUSE AS INDICATED.
FLEXIBLE DUCT:
INSULATED, MAXIMUM
5' LONG, DO NOT SAG OR
KINK
SEAL INSULATION OR
DUCT CONNECTION A-
TO DIFFUSER TO FORE
SEAL AT DUCT CONN[
CEILING DIFFUSER
NOTE:
1 . HANGER SUPPORTS SHALL BE PER SMACNA AND APPLICABLE SPECIFICATIONS.
2. ELBOWS SHALL BE SQUARE NECK (SAME IN AND OUT DIMENSION) WITH 2" DOUBLE
THICKNESS TURNING VANES.
3. OFFSETS SHALL NOT EXCEED 30" ANGLE, AND SHALL NOT REDUCE THE FREE AREA OF
THE DUCT.
4. TRANSITIONS SHALL NOT EXCEED 1:3 RATIO (4" TRANSITION PER FOOT SINGLE SIDED
TRANSITION, AND 8" PER FOOT DOUBLE SIDED TRANSITION).
5. RECTANGULAR BRANCH CONNECTIONS SHALL BE 45° ENTRY TYPE, WITH METAL SLEEVE
AND CLINCH LOCK CONNECTION. ENTRY LENGTH SHALL BE 25% OF BRANCH DUCT WIDTH.
6. ROUND BRANCH DUCT CONNECTIONS SHALL BE SPIN -IN FITTINGS,
WITH EXTRACTOR, DAMPER AND HANDLE.
7. FLEXIBLE ROUND DUCT SHALL INCLUDE: TRIPLE LOCK METAL FLEXIBLE DUCTING, BLANKET
INSULATION AT A MINIMUM 8.0 R VALUE, AN ALUMINUM FOIL OUTER VAPOR BARRIER,
AND BE UL -181 APPROVED.
DIFFUSER CONNECTION DETAIL
NOT TO SCALE
THIS DRAWING AS AN INSTRUMENT
F SERVICE, I L
O C S AND SIAL REMAIN
rHE PROPERTY OF ARCHITECT.
USE OF THE DRAWING, OR ANY
REPRODUCTION THE
RE OF WITHOUT
THE EXPRESS R SS WRITTEN PERMISSION
OF THE DESIGNER IS STRICTLY
PROHIBITED. SUBMISSION OR
DISTRIBUTION TO MEET OFFICIAL
REGULATORY REQUIREMENTS OR
FOR ANY OTHER PURPOSES IN
CONJUNCTION WITH THIS PROJECT IS
NOT TO BE CONSTRUED AS
PUBLICATION IN DEROGATION OF THIS
ARCHITECTS RIGHTS.
COPYRIGHT 2008
NO.
DATE
REVISION
1
2-22-09
_ OWNER REVISION
HVAC SYMBOLS AND ABBREVIATIONS
---®
EXISTING DUCTWORK
VAV-*
VARIABLE AIR VOLUME
A
NEW DUCTWORK
CFM
CUBIC FEET PER MINUTE
B
RETURN
FLEXIBLE DUCT
0-
DIFFUSER DESIGNATION
VOLUME DAMPER
21
RETURN OR EXHAUST GRILLE
®
SUPPLY DIFFUSER
Of
THERMOSTAT
DIFFUSER SCHEDULE
MARK /n\ NECK
�l 150 CFM
MARK
TYPE
FACE
BASIS OF DESIGN
A
SUPPLY
24 x 24
TITUS OMNI -AA
B
RETURN
24 x 12
TITUS 50F
1. DIFFUSER FRAME TYPES SHALL BE COMPATIBLE WITH ARCHI-
TECTURAL CEILING TYPES IN WHICH IT IS INSTALLED.
2. ALL TO BE OFF-WHITE FINISH, UNLESS NOTED OTHERWISE.
`I
i
'z�
LANDLOKIYE) EXI51ING
51,161"FNPEP CEILING
III 1111 I°
I
B 24
1 2
II � III
F T -F/ -..l
LTL-
IF
f +]
I t + iF_
II
1- ;i !
%:
I I +
II III
I II IIII II'
III
•
TO A\/ -I
r Irm I
r r-r�
8
�T r�
/
r T r 1
�
1-
II IIII II
F} 1
AD
+ 1
/
I I -I -i
I {+
I {+{
1
-I-+ 1
15++
LL_L
/
,
4-+-I
LL_LJ
®
h_ -+-1
LL_lJ
4 +-IIL11J
LL1J
TLI
I
III IIII III
II
/
8'0
A
12
24-XI
-�
R
--
II IIII
// /
15
II j
L IL
TO VAV
1
I I
//
.
® , /
I +
f "t- -f i
I t ....';y
•
-I- -+ I
I- I- I I
LLJ J
LL_LJ
LLLJ
�LsJ
r Ir-
I I
II III
8 0
('
II
I II III
A
15 0
/
�II!!II�
I
r TT
/
I -TT -1
r -7T-1
f T -T-1
r -TT -1
III IIII
I -i -
/
I- 1 -1- {
F +- -i- -{
I- J_ -I
F -i - + -1
III IIII 11
I- l.r nl
I F +
I- -I- + -i
I I +
I- "I- + -1
L
�':>JassJ
/
L1 -LJ
LLJ-J
LL_LJ
LL_LJ
A
TO VAV-11
IIII III
•
8"0
61:10I
A
(�
I II
I II IIII II
/ /
15010
TO
AV -1
I II -If II III
/ /
r_ T- -r -1
r- 7 -r -1
r- T- -r -1
F T- r -1
II III II
/ /
F + -I -I
I + -+ 1
F +- 1 -1
I -1- -i -I
L IL Jill1
f I + -1
•
I -}- -1 -
{ -1-- + -1
I I + 1
•
//
L _L -i
ILL_LJ
LL1J
LL_L_J
(�
_JIT L-
ELOCA
ED T'ST6,T
I
f r -----ter---,
Il T -III ^ I
-
24x
I
I
I- T- T -1
f T T -1
f T T -1
r- _F r>
IF �I
J
i 1+ 1
I f -i
I i -i- 1
+ i
B
12
--- - -
^' - - -
=
I F + -I
{ -1- + -I
I -1- + -1
I-`Frl
---
I
LL_LJ
LL_LJ
LL_1J
uL%L'J
F-
2
IxI2
I
I
III
B
i
II
r TT 1
r I --r
r T T
r rTVAV-
F_T 1
rTT 1
I + + i
F +-
I- 1 -1- 1
F +- + -1
i + i
1- t- -1- -1
L_y
r - ` I
I- + + -1
I- -(fid`=1
I- +- + -I
I- +- + -I
-1+- -I
-I- + -I
I
LL1J
LL> >J
LL_L-1
LL1J
LL1J
LLJ J
6110
AJ6"10TO
V
V-1
TO V
-1
I- I
f T -r -I
F_ T-1
I -TT -1
1-
I TT -1
F_
L -_
{ i- -} _{
I- +- + 1
I i- + _ {
I- -I-- -1--1
F_ -t-- -1- {
I + + -1
F nil-
II
I 4- 4 -1
•
I- 4- +
I 4- + -1
•
I- +- + -I
I- "I- -1- -1
+- + -1
•
1
1
LL_LJ
LL_1J
LL- J
LL1J
L1_ -.J
L_LLJ
F_
II
I
I
I
III
1
-
L_�
r--r-r-1
r - T -T/
r--r-r-I
�T-T-1
r -TT -1
r - TT/,
1
r- I I
h I t i
F f 1
F F t I
I- t 1 i
i+ 1 -1
f -f t.
14-+ I
I-1+ 1
LL_LJ
o""'W'J
LL1J
LLLJ
LL_LJ
Irl[ 1
I_
1 11.
8"
TO VA
-1
200
A
00
III
TO V+_
I
F T-1
r-
F- T- -T -1
l -TT 1
f T -T-1
r'T-r-1
F - I
f i + 1
+ + -1
F t -i- -1
F +- -I- -I
+ +
f- -f- -t
14- + -1
I 1 + -1
I -I- + -1
•
I +- +
I- I- +
14- +
•
LL_LJ
LLLJ
LL_LJ
LL_L-1
LL_LJ
LL1J
��I
B 24x
2
VI
i --- - 1 i --- --
i ilk_
II II
I�
1II
_-_ SII ---II
SPRINKLER HEAD, TYPICAL.
_
REFERENCE APPROVED
°
SPRINKLER CONTRACTOR
LAYOUT FOR FINAL HEAD
LOCATION.
ADJACENT RESTAURANT
MECHANICAL (PLAN
1/4!1=1101' '^... ._
NOTES TO CONTRACTOR: 1
1. INFORMATION AS SHOWN OR INDICATED ON THE DRAWINGS WAS DONE
FROM INFORMATION RECEIVED FROM THE JOBSITE THEREFORE THE CON-
TRACTOR SHALL VISIT THE JOBSITE PRIOR TO BIDDING TO DETERMINE THE
EXTENT AND SCOPE OF HIS WORK.
2. THE EXISTING VAV BOX AND DUCTWORK FOR VAV-1 SHALL BE REUSED.
3. CONTRACTOR SHALL CONNECT NEW DUCTWORK FOR THE DIFFUSERS TO
THE EXISTING DUCTWORK FOR VAV-1 BOX AS REQUIRED.
4. A TEST AND BALANCE OF THE' SYSTEM SHALL BE PREFORMED BY AN
INDEPENDANT T AND B COMPANY AND A CERTIFIED REPORT SHALL BE
GIVEN TO THE TENANT AND AIRPORT WHEN FINISHED.
S. CFM AS SHOWN AT EACH SUPPLY DIFFUSER SHALL BE VERIFIED AND
COORDINATED WITH THE MAXIMUM CFM BEING DELIEVERED FORM VAV-1.
6. CFM RATING OF THE VAV BOX FROM THE FIELD WAS 1200 CFM, BUT
COULD NOT BE VERIFIED. CONTRACTOR SHALL FIELD VERIFY CAPACITY
OF VAV BOX #1 AND REPORT HIS FINDINGS TO THE ARCHITECT AS
SOON AS POSSIBLE IN WRITING.
Hudson News - Hudson Booksellers
Papyrus
RENOVATIONS AND ALTERATIONS TO EXISTING RETAIL SPACE IN
TERMINAL A -INTERNATIONAL DEPARTURES- UPPER LEVEL
ORLANDO SAN FORD
0 T
C� R
INTERNATIONAL NAL AI RP
S
ANFO
RD FLORIDA
NOTE- TO CONTRACTOR:
WHEN THE CONTRACTOR OBSERVES ERRORS,
DISCREPANCIES, OMISSIONS OR AMBIGUTIES IN THE
CONTRACT DOCUMENTS, CONTRACTOR SHALL
IMMEDIATLEY, IN WRITING, REFER SAME TO THE ARCH-
ITECT FOR THE ARCHITECT'S WRITTEN INTERPRETATION OR
CORRECTION. IF CONTRACTOR SHALL FAIL TO GIVE
NOTICE OF SUCH WORK BEFORE CONSTRUCTION OR
FABRICATION OF THE WORK, CONTRACTOR WILL BE
HELD RESPONSIBLE FUR THE RESULT OF SUCH ERROR,
DISCREPANCY OR OMISSION.
DON PENN, P.E.
FLORIDA ENG ME''INFER N0. 0051096 (,H
d635 WESTPO
RT PARKWAY SUITE 300
p G
' 7
GRAPEVINE, TEXAS 76051
817-410-2858 FAX 817-251-8411
DRAWN
.JVP
CHECKED
DP
DATE
JOB NUMBER
08
14.